| chip soc/intel/cannonlake |
| register "tdp_pl1_override" = "8" |
| register "tdp_pl2_override" = "51" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoPci, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| [PchSerialIoIndexSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexSPI1] = PchSerialIoPci, |
| [PchSerialIoIndexSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| # No PCIe WiFi |
| register "PcieRpEnable[13]" = "0" |
| |
| # Enable DMIC1 |
| register "PchHdaAudioLinkDmic1" = "1" |
| |
| register "usb2_ports[0]" = "USB2_PORT_LONG(OC2)" # Type-C Port 0 |
| register "usb2_ports[1]" = "USB2_PORT_LONG(OC2)" # Type-C Port 1 |
| register "usb2_ports[2]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[3]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[4]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[5]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[6]" = "USB2_PORT_LONG(OC_SKIP)" # Camera |
| register "usb2_ports[7]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[8]" = "USB2_PORT_EMPTY" |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # CnVi BT |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 0 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # Type-C Port 1 |
| register "usb3_ports[2]" = "USB3_PORT_EMPTY" |
| register "usb3_ports[3]" = "USB3_PORT_EMPTY" |
| register "usb3_ports[4]" = "USB3_PORT_EMPTY" |
| register "usb3_ports[5]" = "USB3_PORT_EMPTY" |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| I2C0 | Trackpad | |
| #| I2C1 | Touchscreen | |
| #| I2C2 | Digitizer | |
| #| I2C4 | Audio | |
| #+-------------------+---------------------------+ |
| register "common_soc_config" = "{ |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 135, |
| .fall_time_ns = 45, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 60, |
| .fall_time_ns = 25, |
| }, |
| .i2c[2] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 95, |
| .fall_time_ns = 55, |
| }, |
| .i2c[4] = { |
| .speed = I2C_SPEED_FAST, |
| .rise_time_ns = 104, |
| .fall_time_ns = 52, |
| }, |
| .gspi[0] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| }" |
| |
| # GPIO for SD card detect |
| register "sdcard_cd_gpio" = "vSD3_CD_B" |
| |
| # Enable eMMC HS400 |
| register "ScsEmmcHs400Enabled" = "1" |
| |
| # EMMC Tx CMD Delay |
| # Refer to EDS-Vol2-14.3.7. |
| # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39. |
| # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39. |
| register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505" |
| |
| # EMMC TX DATA Delay 1 |
| # Refer to EDS-Vol2-14.3.8. |
| # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78. |
| # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911" |
| |
| # EMMC TX DATA Delay 2 |
| # Refer to EDS-Vol2-14.3.9. |
| # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79. |
| # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. |
| # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79. |
| # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828" |
| |
| # EMMC RX CMD/DATA Delay 1 |
| # Refer to EDS-Vol2-14.3.10. |
| # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119. |
| # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78. |
| # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119. |
| # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119. |
| register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b" |
| |
| # EMMC RX CMD/DATA Delay 2 |
| # Refer to EDS-Vol2-14.3.12. |
| # [17:16] stands for Rx Clock before Output Buffer, |
| # 00: Rx clock after output buffer, |
| # 01: Rx clock before output buffer, |
| # 10: Automatic selection based on working mode. |
| # 11: Reserved |
| # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39. |
| # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79. |
| register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D" |
| |
| # EMMC Rx Strobe Delay |
| # Refer to EDS-Vol2-14.3.11. |
| # [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39. |
| # [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39. |
| register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515" |
| |
| device domain 0 on |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.2 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.3 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.4 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.5 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Camera"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 2.6 on end |
| end |
| chip drivers/usb/acpi |
| device usb 2.7 off end |
| end |
| chip drivers/usb/acpi |
| device usb 2.8 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C14)" |
| device usb 2.9 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Left Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""Right Type-C Port"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(2, 1)" |
| device usb 3.1 on end |
| end |
| chip drivers/usb/acpi |
| device usb 3.2 off end |
| end |
| chip drivers/usb/acpi |
| device usb 3.3 off end |
| end |
| chip drivers/usb/acpi |
| device usb 3.4 off end |
| end |
| end |
| end |
| end |
| |
| device pci 15.0 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""PNP0C50"" |
| register "generic.desc" = ""Synaptics Touchpad"" |
| register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" |
| register "generic.probed" = "1" |
| register "generic.wake" = "GPE0_DW0_21" |
| register "hid_desc_reg_offset" = "0x20" |
| device i2c 0x20 on end |
| end |
| end # I2C 0 |
| |
| device pci 15.1 on |
| chip drivers/i2c/generic |
| register "hid" = "ACPI_DT_NAMESPACE_HID" |
| register "compat_string" = ""atmel,maxtouch"" |
| register "desc" = ""Atmel Touchscreen"" |
| register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D16_IRQ)" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" |
| register "reset_delay_ms" = "91" # 90.5 ms |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" |
| register "enable_delay_ms" = "1" # 90 ns |
| register "has_power_resource" = "1" |
| register "disable_gpio_export_in_crs" = "1" |
| register "probed" = "1" |
| device i2c 4b on end |
| end |
| |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0001"" |
| register "desc" = ""ELAN Touchscreen"" |
| register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" |
| register "probed" = "1" |
| register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C12)" |
| register "enable_delay_ms" = "10" |
| register "enable_off_delay_ms" = "100" |
| register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" |
| register "reset_delay_ms" = "20" |
| register "reset_off_delay_ms" = "2" |
| register "has_power_resource" = "1" |
| device i2c 10 on end |
| end |
| end # I2C #1 |
| |
| device pci 15.2 off end # I2C #2 |
| |
| device pci 19.0 on |
| chip drivers/i2c/da7219 |
| # TODO: these settings were copied from another board |
| # with the same chip. verify the settings |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" |
| register "btn_cfg" = "50" |
| register "mic_det_thr" = "500" |
| register "jack_ins_deb" = "20" |
| register "jack_det_rate" = ""32ms_64ms"" |
| register "jack_rem_deb" = "1" |
| register "a_d_btn_thr" = "0xa" |
| register "d_b_btn_thr" = "0x16" |
| register "b_c_btn_thr" = "0x21" |
| register "c_mic_btn_thr" = "0x3e" |
| register "btn_avg" = "4" |
| register "adc_1bit_rpt" = "1" |
| register "micbias_lvl" = "2600" |
| register "mic_amp_in_sel" = ""diff"" |
| device i2c 0x1a on end |
| end |
| end |
| |
| # No PCIe WiFi |
| device pci 1d.5 off end |
| device pci 1a.0 on end #eMMC |
| device pci 1e.3 off end # GSPI #1 |
| device pci 1f.3 on |
| chip drivers/generic/max98357a |
| register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)" |
| register "sdmode_delay" = "5" |
| device generic 0 on end |
| end |
| end # Intel HDA |
| end # domain |
| end |
