blob: 766f498a0a5a557ea20fe097d9198371cbf5cae2 [file] [log] [blame]
#include "linux_syscall.h"
#include "linux_console.h"
static void setup_coherent_ht_domain(void)
{
static const unsigned int register_values[] = {
#if 1
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x40) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x44) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x48) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x4c) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x50) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x54) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x58) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x5c) & 0xFF)), 0xfff0f0f0, 0x00010101,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x68) & 0xFF)), 0x00800000, 0x0f00840f,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x6C) & 0xFF)), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x84) & 0xFF)), 0x00009c05, 0x11110020,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x88) & 0xFF)), 0xfffff0ff, 0x00000200,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((0) & 0x07) << 8) | ((0x94) & 0xFF)), 0xff000000, 0x00ff0000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x44) & 0xFF)), 0x0000f8f8, 0x003f0000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x4C) & 0xFF)), 0x0000f8f8, 0x00000001,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x54) & 0xFF)), 0x0000f8f8, 0x00000002,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x5C) & 0xFF)), 0x0000f8f8, 0x00000003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x64) & 0xFF)), 0x0000f8f8, 0x00000004,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x6C) & 0xFF)), 0x0000f8f8, 0x00000005,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x74) & 0xFF)), 0x0000f8f8, 0x00000006,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x7C) & 0xFF)), 0x0000f8f8, 0x00000007,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x40) & 0xFF)), 0x0000f8fc, 0x00000003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x48) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x50) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x58) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x60) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x68) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x70) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x78) & 0xFF)), 0x0000f8fc, 0x00400000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x84) & 0xFF)), 0x00000048, 0x00e1ff00,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x8C) & 0xFF)), 0x00000048, 0x00dfff00,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x94) & 0xFF)), 0x00000048, 0x00e3ff00,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x9C) & 0xFF)), 0x00000048, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA4) & 0xFF)), 0x00000048, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xAC) & 0xFF)), 0x00000048, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB4) & 0xFF)), 0x00000048, 0x00000b00,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xBC) & 0xFF)), 0x00000048, 0x00fe0b00,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x80) & 0xFF)), 0x000000f0, 0x00e00003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x88) & 0xFF)), 0x000000f0, 0x00d80003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x90) & 0xFF)), 0x000000f0, 0x00e20003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0x98) & 0xFF)), 0x000000f0, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA0) & 0xFF)), 0x000000f0, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xA8) & 0xFF)), 0x000000f0, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB0) & 0xFF)), 0x000000f0, 0x00000a03,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xB8) & 0xFF)), 0x000000f0, 0x00400003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC4) & 0xFF)), 0xFE000FC8, 0x0000d000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xCC) & 0xFF)), 0xFE000FC8, 0x000ff000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD4) & 0xFF)), 0xFE000FC8, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xDC) & 0xFF)), 0xFE000FC8, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC0) & 0xFF)), 0xFE000FCC, 0x0000d003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xC8) & 0xFF)), 0xFE000FCC, 0x00001013,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD0) & 0xFF)), 0xFE000FCC, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xD8) & 0xFF)), 0xFE000FCC, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE0) & 0xFF)), 0x0000FC88, 0xff000003,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE4) & 0xFF)), 0x0000FC88, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xE8) & 0xFF)), 0x0000FC88, 0x00000000,
( (((0) & 0xFF) << 16) | (((0x18) & 0x1f) << 11) | (((1) & 0x07) << 8) | ((0xEC) & 0xFF)), 0x0000FC88, 0x00000000,
#else
#define PCI_ADDR(BUS, DEV, FN, WHERE) ( \
(((BUS) & 0xFF) << 16) | \
(((DEV) & 0x1f) << 11) | \
(((FN) & 0x07) << 8) | \
((WHERE) & 0xFF))
/* Routing Table Node i
* F0:0x40 i = 0,
* F0:0x44 i = 1,
* F0:0x48 i = 2,
* F0:0x4c i = 3,
* F0:0x50 i = 4,
* F0:0x54 i = 5,
* F0:0x58 i = 6,
* F0:0x5c i = 7
* [ 0: 3] Request Route
* [0] Route to this node
* [1] Route to Link 0
* [2] Route to Link 1
* [3] Route to Link 2
* [11: 8] Response Route
* [0] Route to this node
* [1] Route to Link 0
* [2] Route to Link 1
* [3] Route to Link 2
* [19:16] Broadcast route
* [0] Route to this node
* [1] Route to Link 0
* [2] Route to Link 1
* [3] Route to Link 2
*/
PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
/* Hypetransport Transaction Control Register
* F0:0x68
* [ 0: 0] Disable read byte probe
* 0 = Probes issues
* 1 = Probes not issued
* [ 1: 1] Disable Read Doubleword probe
* 0 = Probes issued
* 1 = Probes not issued
* [ 2: 2] Disable write byte probes
* 0 = Probes issued
* 1 = Probes not issued
* [ 3: 3] Disable Write Doubleword Probes
* 0 = Probes issued
* 1 = Probes not issued.
* [ 4: 4] Disable Memroy Controller Target Start
* 0 = TgtStart packets are generated
* 1 = TgtStart packets are not generated.
* [ 5: 5] CPU1 Enable
* 0 = Second CPU disabled or not present
* 1 = Second CPU enabled.
* [ 6: 6] CPU Request PassPW
* 0 = CPU requests do not pass posted writes
* 1 = CPU requests pass posted writes.
* [ 7: 7] CPU read Respons PassPW
* 0 = CPU Responses do not pass posted writes
* 1 = CPU responses pass posted writes.
* [ 8: 8] Disable Probe Memory Cancel
* 0 = Probes may generate MemCancels
* 1 = Probes may not generate MemCancels
* [ 9: 9] Disable Remote Probe Memory Cancel.
* 0 = Probes hitting dirty blocks generate memory cancel packets
* 1 = Only probed caches on the same node as the memory controller
* generate cancel packets.
* [10:10] Disable Fill Probe
* 0 = Probes issued for cache fills
* 1 = Probes not issued for cache fills.
* [11:11] Response PassPw
* 0 = Downstream response PassPW based on original request
* 1 = Downstream response PassPW set to 1
* [12:12] Change ISOC to Ordered
* 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
* 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
* [14:13] Buffer Release Priority select
* 00 = 64
* 01 = 16
* 10 = 8
* 11 = 2
* [15:15] Limit Coherent HT Configuration Space Range
* 0 = No coherent HT configuration space restrictions
* 1 = Limit coherent HT configuration space based on node count
* [16:16] Local Interrupt Conversion Enable.
* 0 = ExtInt/NMI interrups unaffected.
* 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
* [17:17] APIC Extended Broadcast Enable.
* 0 = APIC broadcast is 0F
* 1 = APIC broadcast is FF
* [18:18] APIC Extended ID Enable
* 0 = APIC ID is 4 bits.
* 1 = APIC ID is 8 bits.
* [19:19] APIC Extended Spurious Vector Enable
* 0 = Lower 4 bits of spurious vector are read-only 1111
* 1 = Lower 4 bits of spurious vecotr are writeable.
* [20:20] Sequence ID Source Node Enable
* 0 = Normal operation
* 1 = Keep SeqID on routed packets for debugging.
* [22:21] Downstream non-posted request limit
* 00 = No limit
* 01 = Limited to 1
* 10 = Limited to 4
* 11 = Limited to 8
* [23:23] RESERVED
* [25:24] Medium-Priority Bypass Count
* - Maximum # of times a medium priority access can pass a low
* priority access before Medium-Priority mode is disabled for one access.
* [27:26] High-Priority Bypass Count
* - Maximum # of times a high prioirty access can pass a medium or low
* priority access before High-prioirty mode is disabled for one access.
* [28:28] Enable High Priority CPU Reads
* 0 = Cpu reads are medium prioirty
* 1 = Cpu reads are high prioirty
* [29:29] Disable Low Priority Writes
* 0 = Non-isochronous writes are low priority
* 1 = Non-isochronous writes are medium prioirty
* [30:30] Disable High Priority Isochronous writes
* 0 = Isochronous writes are high priority
* 1 = Isochronous writes are medium priority
* [31:31] Disable Medium Priority Isochronous writes
* 0 = Isochronous writes are medium are high
* 1 = With bit 30 set makes Isochrouns writes low priority.
*/
PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
/* HT Initialization Control Register
* F0:0x6C
* [ 0: 0] Routing Table Disable
* 0 = Packets are routed according to routing tables
* 1 = Packets are routed according to the default link field
* [ 1: 1] Request Disable (BSP should clear this)
* 0 = Request packets may be generated
* 1 = Request packets may not be generated.
* [ 3: 2] Default Link (Read-only)
* 00 = LDT0
* 01 = LDT1
* 10 = LDT2
* 11 = CPU on same node
* [ 4: 4] Cold Reset
* - Scratch bit cleared by a cold reset
* [ 5: 5] BIOS Reset Detect
* - Scratch bit cleared by a cold reset
* [ 6: 6] INIT Detect
* - Scratch bit cleared by a warm or cold reset not by an INIT
*
*/
PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
/* LDTi Capabilities Registers
* F0:0x80 i = 0,
* F0:0xA0 i = 1,
* F0:0xC0 i = 2,
*/
/* LDTi Link Control Registrs
* F0:0x84 i = 0,
* F0:0xA4 i = 1,
* F0:0xC4 i = 2,
* [ 1: 1] CRC Flood Enable
* 0 = Do not generate sync packets on CRC error
* 1 = Generate sync packets on CRC error
* [ 2: 2] CRC Start Test (Read-Only)
* [ 3: 3] CRC Force Frame Error
* 0 = Do not generate bad CRC
* 1 = Generate bad CRC
* [ 4: 4] Link Failure
* 0 = No link failure detected
* 1 = Link failure detected
* [ 5: 5] Initialization Complete
* 0 = Initialization not complete
* 1 = Initialization complete
* [ 6: 6] Receiver off
* 0 = Recevier on
* 1 = Receiver off
* [ 7: 7] Transmitter Off
* 0 = Transmitter on
* 1 = Transmitter off
* [ 9: 8] CRC_Error
* 00 = No error
* [0] = 1 Error on byte lane 0
* [1] = 1 Error on byte lane 1
* [12:12] Isochrnous Enable (Read-Only)
* [13:13] HT Stop Tristate Enable
* 0 = Driven during an LDTSTOP_L
* 1 = Tristated during and LDTSTOP_L
* [14:14] Extended CTL Time
* 0 = CTL is asserted for 16 bit times during link initialization
* 1 = CTL is asserted for 50us during link initialization
* [18:16] Max Link Width In (Read-Only?)
* 000 = 8 bit link
* 001 = 16bit link
* [19:19] Doubleword Flow Control in (Read-Only)
* 0 = This link does not support doubleword flow control
* 1 = This link supports doubleword flow control
* [22:20] Max Link Width Out (Read-Only?)
* 000 = 8 bit link
* 001 = 16bit link
* [23:23] Doubleworld Flow Control out (Read-Only)
* 0 = This link does not support doubleword flow control
* 1 = This link supports doubleworkd flow control
* [26:24] Link Width In
* 000 = Use 8 bits
* 001 = Use 16 bits
* 010 = reserved
* 011 = Use 32 bits
* 100 = Use 2 bits
* 101 = Use 4 bits
* 110 = reserved
* 111 = Link physically not connected
* [27:27] Doubleword Flow Control In Enable
* 0 = Doubleword flow control disabled
* 1 = Doubleword flow control enabled (Not currently supported)
* [30:28] Link Width Out
* 000 = Use 8 bits
* 001 = Use 16 bits
* 010 = reserved
* 011 = Use 32 bits
* 100 = Use 2 bits
* 101 = Use 4 bits
* 110 = reserved
* 111 = Link physically not connected
* [31:31] Doubleworld Flow Control Out Enable
* 0 = Doubleworld flow control disabled
* 1 = Doubleword flow control enabled (Not currently supported)
*/
PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
/* LDTi Frequency/Revision Registers
* F0:0x88 i = 0,
* F0:0xA8 i = 1,
* F0:0xC8 i = 2,
* [ 4: 0] Minor Revision
* Contains the HT Minor revision
* [ 7: 5] Major Revision
* Contains the HT Major revision
* [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
* 0000 = 200Mhz
* 0001 = reserved
* 0010 = 400Mhz
* 0011 = reserved
* 0100 = 600Mhz
* 0101 = 800Mhz
* 0110 = 1000Mhz
* 0111 = reserved
* 1000 = reserved
* 1001 = reserved
* 1010 = reserved
* 1011 = reserved
* 1100 = reserved
* 1101 = reserved
* 1110 = reserved
* 1111 = 100 Mhz
* [15:12] Error (Not currently Implemented)
* [31:16] Indicates the frequency capabilities of the link
* [16] = 1 encoding 0000 of freq supported
* [17] = 1 encoding 0001 of freq supported
* [18] = 1 encoding 0010 of freq supported
* [19] = 1 encoding 0011 of freq supported
* [20] = 1 encoding 0100 of freq supported
* [21] = 1 encoding 0101 of freq supported
* [22] = 1 encoding 0110 of freq supported
* [23] = 1 encoding 0111 of freq supported
* [24] = 1 encoding 1000 of freq supported
* [25] = 1 encoding 1001 of freq supported
* [26] = 1 encoding 1010 of freq supported
* [27] = 1 encoding 1011 of freq supported
* [28] = 1 encoding 1100 of freq supported
* [29] = 1 encoding 1101 of freq supported
* [30] = 1 encoding 1110 of freq supported
* [31] = 1 encoding 1111 of freq supported
*/
PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
/* LDTi Feature Capability
* F0:0x8C i = 0,
* F0:0xAC i = 1,
* F0:0xCC i = 2,
*/
/* LDTi Buffer Count Registers
* F0:0x90 i = 0,
* F0:0xB0 i = 1,
* F0:0xD0 i = 2,
*/
/* LDTi Bus Number Registers
* F0:0x94 i = 0,
* F0:0xB4 i = 1,
* F0:0xD4 i = 2,
* For NonCoherent HT specifies the bus number downstream (behind the host bridge)
* [ 0: 7] Primary Bus Number
* [15: 8] Secondary Bus Number
* [23:15] Subordiante Bus Number
* [31:24] reserved
*/
PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
/* LDTi Type Registers
* F0:0x98 i = 0,
* F0:0xB8 i = 1,
* F0:0xD8 i = 2,
*/
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
* F1:0x4C i = 1
* F1:0x54 i = 2
* F1:0x5C i = 3
* F1:0x64 i = 4
* F1:0x6C i = 5
* F1:0x74 i = 6
* F1:0x7C i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 3] Reserved
* [10: 8] Interleave select
* specifies the values of A[14:12] to use with interleave enable.
* [15:11] Reserved
* [31:16] DRAM Limit Address i Bits 39-24
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
#if MEMORY_1024MB
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
#endif
#if MEMORY_512MB
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
#endif
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
/* DRAM Base i Registers
* F1:0x40 i = 0
* F1:0x48 i = 1
* F1:0x50 i = 2
* F1:0x58 i = 3
* F1:0x60 i = 4
* F1:0x68 i = 5
* F1:0x70 i = 6
* F1:0x78 i = 7
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 7: 2] Reserved
* [10: 8] Interleave Enable
* 000 = No interleave
* 001 = Interleave on A[12] (2 nodes)
* 010 = reserved
* 011 = Interleave on A[12] and A[14] (4 nodes)
* 100 = reserved
* 101 = reserved
* 110 = reserved
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
#if MEMORY_1024MB
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
#endif
#if MEMORY_512MB
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
#endif
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
* F1:0x8C i = 1
* F1:0x94 i = 2
* F1:0x9C i = 3
* F1:0xA4 i = 4
* F1:0xAC i = 5
* F1:0xB4 i = 6
* F1:0xBC i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = Reserved
* [ 6: 6] Reserved
* [ 7: 7] Non-Posted
* 0 = CPU writes may be posted
* 1 = CPU writes must be non-posted
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
* F1:0x88 i = 1
* F1:0x90 i = 2
* F1:0x98 i = 3
* F1:0xA0 i = 4
* F1:0xA8 i = 5
* F1:0xB0 i = 6
* F1:0xB8 i = 7
* [ 0: 0] Read Enable
* 0 = Reads disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes disabled
* 1 = Writes Enabled
* [ 2: 2] Cpu Disable
* 0 = Cpu can use this I/O range
* 1 = Cpu requests do not use this I/O range
* [ 3: 3] Lock
* 0 = base/limit registers i are read/write
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
#if MEMORY_1024MB
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
#endif
#if MEMORY_512MB
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
#endif
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
* F1:0xCC i = 1
* F1:0xD4 i = 2
* F1:0xDC i = 3
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = reserved
* [11: 6] Reserved
* [24:12] PCI I/O Limit Address i
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
* F1:0xC8 i = 1
* F1:0xD0 i = 2
* F1:0xD8 i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
* 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
* F1:0xE8 i = 2
* F1:0xEC i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 2: 2] Device Number Compare Enable
* 0 = The ranges are based on bus number
* 1 = The ranges are ranges of devices on bus 0
* [ 3: 3] Reserved
* [ 6: 4] Destination Node
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 7] Reserved
* [ 9: 8] Destination Link
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 - Reserved
* [15:10] Reserved
* [23:16] Bus Number Base i
* This field defines the lowest bus number in configuration region i
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
#endif
};
int i;
int max;
print_debug("setting up coherent ht domain....\r\n");
max = sizeof(register_values)/sizeof(register_values[0]);
for(i = 0; i < max; i += 3) {
unsigned long reg;
#if 1
print_debug_hex32(register_values[i]);
print_debug(" <-");
print_debug_hex32(register_values[i+2]);
print_debug("\r\n");
#endif
#if 0
reg = pci_read_config32(register_values[i]);
reg &= register_values[i+1];
reg |= register_values[i+2] & ~register_values[i+1];
pci_write_config32(register_values[i], reg);
#endif
}
print_debug("done.\r\n");
}
static void main(void)
{
static const char msg[] = "hello world\r\n";
#if 0
write(STDOUT_FILENO, msg, sizeof(msg));
#endif
#if 1
setup_coherent_ht_domain();
#endif
_exit(0);
}