| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| /* NOTE: This handler assumes the SMM window goes from 0xa0000 |
| * to 0xaffff. In fact, at least on Intel Core CPUs (i945 chipset) |
| * the SMM window is 128K big, covering 0xa0000 to 0xbffff. |
| * So there is a lot of potential for growth in here. Let's stick |
| * to 64k if we can though. |
| */ |
| |
| /* |
| * +--------------------------------+ 0xaffff |
| * | Save State Map Node 0 | |
| * | Save State Map Node 1 | |
| * | Save State Map Node 2 | |
| * | Save State Map Node 3 | |
| * | ... | |
| * +--------------------------------+ 0xaf000 |
| * | | |
| * | | |
| * | | |
| * +--------------------------------+ 0xa8400 |
| * | SMM Entry Node 0 (+ stack) | |
| * +--------------------------------+ 0xa8000 |
| * | SMM Entry Node 1 (+ stack) | |
| * | SMM Entry Node 2 (+ stack) | |
| * | SMM Entry Node 3 (+ stack) | |
| * | ... | |
| * +--------------------------------+ 0xa7400 |
| * | | |
| * | SMM Handler | |
| * | | |
| * +--------------------------------+ 0xa0000 |
| * |
| */ |
| |
| #define LAPIC_ID 0xfee00020 |
| |
| /* SMM_HANDLER_OFFSET is the 16bit offset within the ASEG |
| * at which smm_handler_start lives. At the moment the handler |
| * lives right at 0xa0000, so the offset is 0. |
| */ |
| |
| #define SMM_HANDLER_OFFSET 0x0000 |
| |
| /* initially SMM is some sort of real mode. Let gcc know |
| * how to treat the SMM handler stub |
| */ |
| |
| .section ".handler", "a", @progbits |
| |
| .code16 |
| |
| /** |
| * SMM code to enable protected mode and jump to the |
| * C-written function void smi_handler(u32 smm_revision) |
| * |
| * All the bad magic is not all that bad after all. |
| */ |
| smm_handler_start: |
| movw $(smm_gdtptr16 - smm_handler_start + SMM_HANDLER_OFFSET), %bx |
| data32 lgdt %cs:(%bx) |
| |
| movl %cr0, %eax |
| andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */ |
| orl $0x60000001, %eax /* CD, NW, PE = 1 */ |
| movl %eax, %cr0 |
| |
| /* Enable protected mode */ |
| data32 ljmp $0x08, $1f |
| |
| .code32 |
| 1: |
| /* flush the cache after disabling it */ |
| wbinvd |
| |
| /* Use flat data segment */ |
| movw $0x10, %ax |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %ss |
| movw %ax, %fs |
| movw %ax, %gs |
| |
| /* Get this CPU's LAPIC ID */ |
| movl $LAPIC_ID, %esi |
| movl (%esi), %ecx |
| shr $24, %ecx |
| |
| /* calculate stack offset by multiplying the APIC ID |
| * by 1024 (0x400), and save that offset in ebp. |
| */ |
| shl $10, %ecx |
| movl %ecx, %ebp |
| |
| /* We put the stack for each core right above |
| * its SMM entry point. Core 0 starts at 0xa8000, |
| * we spare 0x10 bytes for the jump to be sure. |
| */ |
| movl $0xa8010, %eax |
| subl %ecx, %eax /* subtract offset, see above */ |
| movl %eax, %ebx /* Save bottom of stack in ebx */ |
| |
| #define SMM_STACK_SIZE (0x400 - 0x10) |
| /* clear stack */ |
| cld |
| movl %eax, %edi |
| movl $(SMM_STACK_SIZE >> 2), %ecx |
| xorl %eax, %eax |
| rep stosl |
| |
| /* set new stack */ |
| addl $SMM_STACK_SIZE, %ebx |
| movl %ebx, %esp |
| |
| /* Get SMM revision */ |
| movl $0xa8000 + 0x7efc, %ebx /* core 0 address */ |
| subl %ebp, %ebx /* subtract core X offset */ |
| movl (%ebx), %eax |
| pushl %eax |
| |
| /* Call 32bit C handler */ |
| call smi_handler |
| |
| /* To return, just do rsm. It will "clean up" protected mode */ |
| rsm |
| |
| .code16 |
| |
| .align 4, 0xff |
| |
| smm_gdtptr16: |
| .word smm_gdt_end - smm_gdt - 1 |
| .long smm_gdt - smm_handler_start + 0xa0000 + SMM_HANDLER_OFFSET |
| |
| .code32 |
| |
| smm_gdt: |
| /* The first GDT entry can not be used. Keep it zero */ |
| .long 0x00000000, 0x00000000 |
| |
| /* gdt selector 0x08, flat code segment */ |
| .word 0xffff, 0x0000 |
| .byte 0x00, 0x9b, 0xcf, 0x00 /* G=1 and 0x0f, 4GB limit */ |
| |
| /* gdt selector 0x10, flat data segment */ |
| .word 0xffff, 0x0000 |
| .byte 0x00, 0x93, 0xcf, 0x00 |
| |
| smm_gdt_end: |
| |
| |
| .section ".jumptable", "a", @progbits |
| |
| /* This is the SMM jump table. All cores use the same SMM handler |
| * for simplicity. But SMM Entry needs to be different due to the |
| * save state area. The jump table makes sure all CPUs jump into the |
| * real handler on SMM entry. |
| */ |
| |
| /* This code currently supports up to 4 CPU cores. If more than 4 CPU cores |
| * shall be used, below table has to be updated, as well as smm.ld |
| */ |
| |
| /* GNU AS/LD will always generate code that assumes CS is 0xa000. In reality |
| * CS will be set to SMM_BASE[19:4] though. Knowing that the smm handler is the |
| * first thing in the ASEG, we do a far jump here, to set CS to 0xa000. |
| */ |
| |
| .code16 |
| jumptable: |
| /* core 3 */ |
| ljmp $0xa000, $SMM_HANDLER_OFFSET |
| .align 1024, 0x00 |
| /* core 2 */ |
| ljmp $0xa000, $SMM_HANDLER_OFFSET |
| .align 1024, 0x00 |
| /* core 1 */ |
| ljmp $0xa000, $SMM_HANDLER_OFFSET |
| .align 1024, 0x00 |
| /* core 0 */ |
| ljmp $0xa000, $SMM_HANDLER_OFFSET |
| .align 1024, 0x00 |
| |