| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| // Intel SMBus Controller 0:1f.3 |
| |
| Device (SBUS) |
| { |
| Name (_ADR, 0x001f0003) |
| |
| #ifdef ENABLE_SMBUS_METHODS |
| OperationRegion (SMBP, PCI_Config, 0x00, 0x100) |
| Field(SMBP, DWordAcc, NoLock, Preserve) |
| { |
| Offset(0x40), |
| , 2, |
| I2CE, 1 |
| } |
| |
| OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) |
| Field (SMBI, ByteAcc, NoLock, Preserve) |
| { |
| HSTS, 8, // Host Status |
| , 8, |
| HCNT, 8, // Host Control |
| HCMD, 8, // Host Command |
| TXSA, 8, // Transmit Slave Address |
| DAT0, 8, // Host Data 0 |
| DAT1, 8, // Host Data 1 |
| HBDB, 8, // Host Block Data Byte |
| PECK, 8, // Packet Error Check |
| RXSA, 8, // Receive Slave Address |
| RXDA, 16, // Receive Slave Data |
| AUXS, 8, // Auxiliary Status |
| AUXC, 8, // Auxiliary Control |
| SLPC, 8, // SMLink Pin Control |
| SBPC, 8, // SMBus Pin Control |
| SSTS, 8, // Slave Status |
| SCMD, 8, // Slave Command |
| NADR, 8, // Notify Device Address |
| NDLB, 8, // Notify Data Low Byte |
| NDLH, 8, // Notify Data High Byte |
| } |
| |
| // Kill all SMBus communication |
| Method (KILL, 0, Serialized) |
| { |
| Or (HCNT, 0x02, HCNT) // Send Kill |
| Or (HSTS, 0xff, HSTS) // Clean Status |
| } |
| |
| // Check if last operation completed |
| // return Failure = 0, Success = 1 |
| Method (CMPL, 0, Serialized) |
| { |
| Store (4000, Local0) // Timeout 200ms in 50us steps |
| While (Local0) { |
| If (And(HSTS, 0x02)) { // Completion Status? |
| Return (1) // Operation Completed |
| } Else { |
| Stall (50) |
| Decrement (Local0) |
| If (LEqual(Local0, 0)) { |
| KILL() |
| } |
| } |
| } |
| |
| Return (0) // Failure |
| } |
| |
| |
| // Wait for SMBus to become ready |
| Method (SRDY, 0, Serialized) |
| { |
| Store (200, Local0) // Timeout 200ms |
| While (Local0) { |
| If (And(HSTS, 0x40)) { // IN_USE? |
| Sleep(1) // Wait 1ms |
| Decrement(Local0) // timeout-- |
| If (LEqual(Local0, 0)) { |
| Return (1) |
| } |
| } Else { |
| Store (0, Local0) // We're ready |
| } |
| } |
| |
| Store (4000, Local0) // Timeout 200ms (50us * 4000) |
| While (Local0) { |
| If (And (HSTS, 0x01)) { // Host Busy? |
| Stall(50) // Wait 50us |
| Decrement(Local0) // timeout-- |
| If (LEqual(Local0, 0)) { |
| KILL() |
| } |
| } Else { |
| Return (0) // Success |
| } |
| } |
| |
| Return (1) // Failure |
| } |
| |
| // SMBus Send Byte |
| // Arg0: Address |
| // Arg1: Data |
| // Return: 1 = Success, 0=Failure |
| |
| Method (SSXB, 2, Serialized) |
| { |
| |
| // Is the SMBus Controller Ready? |
| If (SRDY()) { |
| Return (0) |
| } |
| |
| // Send Byte |
| Store (0, I2CE) // SMBus Enable |
| Store (0xbf, HSTS) |
| Store (Arg0, TXSA) // Write Address |
| Store (Arg1, HCMD) // Write Data |
| |
| Store (0x48, HCNT) // Start + Byte Data Protocol |
| |
| If (CMPL()) { |
| Or (HSTS, 0xff, HSTS) // Clean up |
| Return (1) // Success |
| } |
| |
| Return (0) |
| } |
| |
| |
| // SMBus Receive Byte |
| // Arg0: Address |
| // Return: 0xffff = Failure, Data (8bit) = Success |
| |
| Method (SRXB, 2, Serialized) |
| { |
| |
| // Is the SMBus Controller Ready? |
| If (SRDY()) { |
| Return (0xffff) |
| } |
| |
| // Receive Byte |
| Store (0, I2CE) // SMBus Enable |
| Store (0xbf, HSTS) |
| Store (Or (Arg0, 1), TXSA) // Write Address |
| |
| Store (0x44, HCNT) // Start |
| |
| If (CMPL()) { |
| Or (HSTS, 0xff, HSTS) // Clean up |
| Return (DAT0) // Success |
| } |
| |
| Return (0xffff) |
| } |
| |
| |
| // SMBus Write Byte |
| // Arg0: Address |
| // Arg1: Command |
| // Arg2: Data |
| // Return: 1 = Success, 0=Failure |
| |
| Method (SWRB, 3, Serialized) |
| { |
| |
| // Is the SMBus Controller Ready? |
| If (SRDY()) { |
| Return (0) |
| } |
| |
| // Send Byte |
| Store (0, I2CE) // SMBus Enable |
| Store (0xbf, HSTS) |
| Store (Arg0, TXSA) // Write Address |
| Store (Arg1, HCMD) // Write Command |
| Store (Arg2, DAT0) // Write Data |
| |
| Store (0x48, HCNT) // Start + Byte Protocol |
| |
| If (CMPL()) { |
| Or (HSTS, 0xff, HSTS) // Clean up |
| Return (1) // Success |
| } |
| |
| Return (0) |
| } |
| |
| |
| // SMBus Read Byte |
| // Arg0: Address |
| // Arg1: Command |
| // Return: 0xffff = Failure, Data (8bit) = Success |
| |
| Method (SRDB, 2, Serialized) |
| { |
| |
| // Is the SMBus Controller Ready? |
| If (SRDY()) { |
| Return (0xffff) |
| } |
| |
| // Receive Byte |
| Store (0, I2CE) // SMBus Enable |
| Store (0xbf, HSTS) |
| Store (Or (Arg0, 1), TXSA) // Write Address |
| Store (Arg1, HCMD) // Command |
| |
| Store (0x48, HCNT) // Start |
| |
| If (CMPL()) { |
| Or (HSTS, 0xff, HSTS) // Clean up |
| Return (DAT0) // Success |
| } |
| |
| Return (0xffff) |
| } |
| #endif |
| } |
| |