src/cpu/samsung/exynos5420/dmc_init_ddr3.c - mirrors/cros/chromiumos/third_party/coreboot - Git at Google

 /*
  * This file is part of the coreboot project.
  *
  * DDR3 mem setup file for EXYNOS5 based board
  *
  * Copyright (C) 2012 Samsung Electronics
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <console/console.h>
 #include <delay.h>
 #include <arch/io.h>
 #include "dmc.h"
 #include "setup.h"
 #include "cpu.h"
 #include "clk.h"

 #define TIMEOUT	10000

 /* 'reset' field is currently ignored. */

 int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
 {
 	struct exynos5420_clock *clk =
 		(struct exynos5420_clock *)EXYNOS5_CLOCK_BASE;
 	struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
 	struct exynos5_dmc *drex0, *drex1;
 	struct exynos5_tzasc *tzasc0, *tzasc1;
 	u32 val, nLockR, nLockW_phy0, nLockW_phy1;
 	int i;

 	phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
 	phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
 	drex0 = (struct exynos5_dmc *)EXYNOS5420_DMC_DREXI_0;
 	drex1 = (struct exynos5_dmc *)EXYNOS5420_DMC_DREXI_1;
 	tzasc0 = (struct exynos5_tzasc *)EXYNOS5420_DMC_TZASC_0;
 	tzasc1 = (struct exynos5_tzasc *)EXYNOS5420_DMC_TZASC_1;

 	/* Enable PAUSE for DREX */
 	setbits_le32(&clk->pause, ENABLE_BIT);

 	/* Enable BYPASS mode */
 	setbits_le32(&clk->bpll_con1, BYPASS_EN);

 	writel(MUX_BPLL_SEL_FOUTBPLL, &clk->clk_src_cdrex);
 	do {
 		val = readl(&clk->clk_mux_stat_cdrex);
 		val &= BPLL_SEL_MASK;
 	} while (val != FOUTBPLL);

 	clrbits_le32(&clk->bpll_con1, BYPASS_EN);

 	/* Specify the DDR memory type as DDR3 */
 	val = readl(&phy0_ctrl->phy_con0);
 	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
 	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
 	writel(val, &phy0_ctrl->phy_con0);

 	val = readl(&phy1_ctrl->phy_con0);
 	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
 	val |= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
 	writel(val, &phy1_ctrl->phy_con0);

 	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
 	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
 		(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
 	writel(val, &phy0_ctrl->phy_con42);
 	writel(val, &phy1_ctrl->phy_con42);

 	val = readl(&phy0_ctrl->phy_con26);
 	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
 	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
 	writel(val, &phy0_ctrl->phy_con26);

 	val = readl(&phy1_ctrl->phy_con26);
 	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
 	val |= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
 	writel(val, &phy1_ctrl->phy_con26);

 	/* Set Driver strength for CK, CKE, CS & CA to 0x7
 	 * Set Driver strength for Data Slice 0~3 to 0x6
 	 */
 	val = (0x7 << CA_CK_DRVR_DS_OFFSET) | (0x7 << CA_CKE_DRVR_DS_OFFSET) |
 		(0x7 << CA_CS_DRVR_DS_OFFSET) | (0x7 << CA_ADR_DRVR_DS_OFFSET);
 	val |= (0x6 << DA_3_DS_OFFSET) | (0x6 << DA_2_DS_OFFSET) |
 		(0x6 << DA_1_DS_OFFSET) | (0x6 << DA_0_DS_OFFSET);
 	writel(val, &phy0_ctrl->phy_con39);
 	writel(val, &phy1_ctrl->phy_con39);

 	/* ZQ Calibration */
 	if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl))
 		return SETUP_ERR_ZQ_CALIBRATION_FAILURE;

 	clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN);
 	clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);

 	/* DQ Signal */
 	writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
 	writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);

 	val = MEM_TERM_EN | PHY_TERM_EN;
 	writel(val, &drex0->phycontrol0);
 	writel(val, &drex1->phycontrol0);

 	writel(mem->concontrol |
 		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
 		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
 		&drex0->concontrol);
 	writel(mem->concontrol |
 		(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) |
 		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
 		&drex1->concontrol);

 	do {
 		val = readl(&drex0->phystatus);
 	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
 	do {
 		val = readl(&drex1->phystatus);
 	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);

 	clrbits_le32(&drex0->concontrol, DFI_INIT_START);
 	clrbits_le32(&drex1->concontrol, DFI_INIT_START);

 	update_reset_dll(drex0, DDR_MODE_DDR3);
 	update_reset_dll(drex1, DDR_MODE_DDR3);

 	/* Set Base Address:
 	 * 0x2000_0000 ~ 0x5FFF_FFFF
 	 * 0x6000_0000 ~ 0x9FFF_FFFF
 	 */
 	/* MEMBASECONFIG0 */
 	val = DMC_MEMBASECONFIGx_CHIP_BASE(DMC_CHIP_BASE_0) |
 		DMC_MEMBASECONFIGx_CHIP_MASK(DMC_CHIP_MASK);
 	writel(val, &tzasc0->membaseconfig0);
 	writel(val, &tzasc1->membaseconfig0);

 	/* MEMBASECONFIG1 */
 	val = DMC_MEMBASECONFIGx_CHIP_BASE(DMC_CHIP_BASE_1) |
 		DMC_MEMBASECONFIGx_CHIP_MASK(DMC_CHIP_MASK);
 	writel(val, &tzasc0->membaseconfig1);
 	writel(val, &tzasc1->membaseconfig1);

 	/* Memory Channel Inteleaving Size
 	 * Exynos5420 Channel interleaving = 128 bytes
 	 */
 	/* MEMCONFIG0/1 */
 	writel(mem->memconfig, &tzasc0->memconfig0);
 	writel(mem->memconfig, &tzasc1->memconfig0);
 	writel(mem->memconfig, &tzasc0->memconfig1);
 	writel(mem->memconfig, &tzasc1->memconfig1);

 	/* Precharge Configuration */
 	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
 		&drex0->prechconfig0);
 	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
 		&drex1->prechconfig0);

 	/* TimingRow, TimingData, TimingPower and Timingaref
 	 * values as per Memory AC parameters
 	 */
 	writel(mem->timing_ref, &drex0->timingref);
 	writel(mem->timing_ref, &drex1->timingref);
 	writel(mem->timing_row, &drex0->timingrow);
 	writel(mem->timing_row, &drex1->timingrow);
 	writel(mem->timing_data, &drex0->timingdata);
 	writel(mem->timing_data, &drex1->timingdata);
 	writel(mem->timing_power, &drex0->timingpower);
 	writel(mem->timing_power, &drex1->timingpower);

 	if (reset) {
 		/* Send NOP, MRS and ZQINIT commands.
 		 * Sending MRS command will reset the DRAM. We should not be
 		 * reseting the DRAM after resume, this will lead to memory
 		 * corruption as DRAM content is lost after DRAM reset.
 		 */
 		dmc_config_mrs(mem, drex0);
 		dmc_config_mrs(mem, drex1);
 	} else {
 		u32 ret;

 		/*
 		 * During Suspend-Resume & S/W-Reset, as soon as PMU releases
 		 * pad retention, CKE goes high. This causes memory contents
 		 * not to be retained during DRAM initialization. Therfore,
 		 * there is a new control register(0x100431e8[28]) which lets us
 		 * release pad retention and retain the memory content until the
 		 * initialization is complete.
 		 */
 		write32(PAD_RETENTION_DRAM_COREBLK_VAL,
 			(void *)PAD_RETENTION_DRAM_COREBLK_OPTION);
 		do {
 			ret = read32((void *)PAD_RETENTION_DRAM_STATUS);
 		} while (ret != 0x1);

 		/*
 		 * CKE PAD retention disables DRAM self-refresh mode.
 		 * Send auto refresh command for DRAM refresh.
 		 */
 		for (i = 0; i < 128; i++) {
 			writel(DIRECT_CMD_REFA, &drex0->directcmd);
 			writel(DIRECT_CMD_REFA | (0x1 << DIRECT_CMD_CHIP_SHIFT),
 				&drex0->directcmd);
 			writel(DIRECT_CMD_REFA, &drex1->directcmd);
 			writel(DIRECT_CMD_REFA | (0x1 << DIRECT_CMD_CHIP_SHIFT),
 				&drex1->directcmd);
 		}
 	}

 	if (mem->gate_leveling_enable) {

 		setbits_le32(&phy0_ctrl->phy_con0, CTRL_ATGATE);
 		setbits_le32(&phy1_ctrl->phy_con0, CTRL_ATGATE);

 		setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
 		setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);

 		val = PHY_CON2_RESET_VAL;
 		val |= INIT_DESKEW_EN;
 		writel(val, &phy0_ctrl->phy_con2);
 		writel(val, &phy1_ctrl->phy_con2);

 		val = PHY_CON0_RESET_VAL;
 		val |= P0_CMD_EN;
 		val |= BYTE_RDLVL_EN;
 		writel(val, &phy0_ctrl->phy_con0);
 		writel(val, &phy1_ctrl->phy_con0);

 		val =  readl(&phy0_ctrl->phy_con1);
 		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
 		writel(val, &phy0_ctrl->phy_con1);

 		val =  readl(&phy1_ctrl->phy_con1);
 		val |= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
 		writel(val, &phy1_ctrl->phy_con1);

 		nLockR = readl(&phy0_ctrl->phy_con13);
 		nLockW_phy0 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
 		nLockR = readl(&phy0_ctrl->phy_con12);
 		nLockR &= ~CTRL_DLL_ON;
 		nLockR |= nLockW_phy0;
 		writel(nLockR, &phy0_ctrl->phy_con12);

 		nLockR = readl(&phy1_ctrl->phy_con13);
 		nLockW_phy1 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
 		nLockR = readl(&phy1_ctrl->phy_con12);
 		nLockR &= ~CTRL_DLL_ON;
 		nLockR |= nLockW_phy1;
 		writel(nLockR, &phy1_ctrl->phy_con12);

 		val = (0x3 << DIRECT_CMD_BANK_SHIFT) | 0x4;
 		writel(val, &drex0->directcmd);
 		writel(val | (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex0->directcmd);
 		writel(val, &drex1->directcmd);
 		writel(val | (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex1->directcmd);

 		setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN);
 		setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN);

 		setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE);
 		setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE);

 		val = readl(&phy0_ctrl->phy_con1);
 		val &= ~(CTRL_GATEDURADJ_MASK);
 		writel(val, &phy0_ctrl->phy_con1);

 		val = readl(&phy1_ctrl->phy_con1);
 		val &= ~(CTRL_GATEDURADJ_MASK);
 		writel(val, &phy1_ctrl->phy_con1);

 		writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
 		i = TIMEOUT;
 		while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
 			 * TODO(waihong): Comment on how long this take to
 			 * timeout
 			 */
 			udelay(1);
 			i--;
 		}
 		if (!i)
 			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
 		writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);

 		writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
 		i = TIMEOUT;
 		while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
 			RDLVL_COMPLETE_CHO) && (i > 0)) {
 			/*
 			 * TODO(waihong): Comment on how long this take to
 			 * timeout
 			 */
 			udelay(1);
 			i--;
 		}
 		if (!i)
 			return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
 		writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config);

 		writel(0, &phy0_ctrl->phy_con14);
 		writel(0, &phy1_ctrl->phy_con14);

 		val = (0x3 << DIRECT_CMD_BANK_SHIFT);
 		writel(val, &drex0->directcmd);
 		writel(val | (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex0->directcmd);
 		writel(val, &drex1->directcmd);
 		writel(val | (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex1->directcmd);

 		/* Common Settings for Leveling */
 		val = PHY_CON12_RESET_VAL;
 		writel((val + nLockW_phy0), &phy0_ctrl->phy_con12);
 		writel((val + nLockW_phy1), &phy1_ctrl->phy_con12);

 		setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN);
 		setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
 	}

 	/* Send PALL command */
 	dmc_config_prech(mem, drex0);
 	dmc_config_prech(mem, drex1);

 	writel(mem->memcontrol, &drex0->memcontrol);
 	writel(mem->memcontrol, &drex1->memcontrol);

 	/* Set DMC Concontrol and enable auto-refresh counter */
 	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
 		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
 		&drex0->concontrol);
 	writel(mem->concontrol | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) |
 		(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
 		&drex1->concontrol);

 	/* Enable Clock Gating Control for DMC
 	 * this saves around 25 mw dmc power as compared to the power
 	 * consumption without these bits enabled
 	 */
 	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
 	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);

 	return 0;
 }
	/*
	* This file is part of the coreboot project.
	*
	* DDR3 mem setup file for EXYNOS5 based board
	*
	* Copyright (C) 2012 Samsung Electronics
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <console/console.h>
	#include <delay.h>
	#include <arch/io.h>
	#include "dmc.h"
	#include "setup.h"
	#include "cpu.h"
	#include "clk.h"

	#define TIMEOUT 10000

	/* 'reset' field is currently ignored. */

	int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset)
	{
	struct exynos5420_clock *clk =
	(struct exynos5420_clock *)EXYNOS5_CLOCK_BASE;
	struct exynos5_phy_control phy0_ctrl, phy1_ctrl;
	struct exynos5_dmc drex0, drex1;
	struct exynos5_tzasc tzasc0, tzasc1;
	u32 val, nLockR, nLockW_phy0, nLockW_phy1;
	int i;

	phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
	phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
	drex0 = (struct exynos5_dmc *)EXYNOS5420_DMC_DREXI_0;
	drex1 = (struct exynos5_dmc *)EXYNOS5420_DMC_DREXI_1;
	tzasc0 = (struct exynos5_tzasc *)EXYNOS5420_DMC_TZASC_0;
	tzasc1 = (struct exynos5_tzasc *)EXYNOS5420_DMC_TZASC_1;

	/* Enable PAUSE for DREX */
	setbits_le32(&clk->pause, ENABLE_BIT);

	/* Enable BYPASS mode */
	setbits_le32(&clk->bpll_con1, BYPASS_EN);

	writel(MUX_BPLL_SEL_FOUTBPLL, &clk->clk_src_cdrex);
	do {
	val = readl(&clk->clk_mux_stat_cdrex);
	val &= BPLL_SEL_MASK;
	} while (val != FOUTBPLL);

	clrbits_le32(&clk->bpll_con1, BYPASS_EN);

	/* Specify the DDR memory type as DDR3 */
	val = readl(&phy0_ctrl->phy_con0);
	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
	val \|= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
	writel(val, &phy0_ctrl->phy_con0);

	val = readl(&phy1_ctrl->phy_con0);
	val &= ~(PHY_CON0_CTRL_DDR_MODE_MASK << PHY_CON0_CTRL_DDR_MODE_SHIFT);
	val \|= (DDR_MODE_DDR3 << PHY_CON0_CTRL_DDR_MODE_SHIFT);
	writel(val, &phy1_ctrl->phy_con0);

	/* Set Read Latency and Burst Length for PHY0 and PHY1 */
	val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) \|
	(mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
	writel(val, &phy0_ctrl->phy_con42);
	writel(val, &phy1_ctrl->phy_con42);

	val = readl(&phy0_ctrl->phy_con26);
	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
	val \|= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
	writel(val, &phy0_ctrl->phy_con26);

	val = readl(&phy1_ctrl->phy_con26);
	val &= ~(T_WRDATA_EN_MASK << T_WRDATA_EN_OFFSET);
	val \|= (T_WRDATA_EN_DDR3 << T_WRDATA_EN_OFFSET);
	writel(val, &phy1_ctrl->phy_con26);

	/* Set Driver strength for CK, CKE, CS & CA to 0x7
	* Set Driver strength for Data Slice 0~3 to 0x6
	*/
	val = (0x7 << CA_CK_DRVR_DS_OFFSET) \| (0x7 << CA_CKE_DRVR_DS_OFFSET) \|
	(0x7 << CA_CS_DRVR_DS_OFFSET) \| (0x7 << CA_ADR_DRVR_DS_OFFSET);
	val \|= (0x6 << DA_3_DS_OFFSET) \| (0x6 << DA_2_DS_OFFSET) \|
	(0x6 << DA_1_DS_OFFSET) \| (0x6 << DA_0_DS_OFFSET);
	writel(val, &phy0_ctrl->phy_con39);
	writel(val, &phy1_ctrl->phy_con39);

	/* ZQ Calibration */
	if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl))
	return SETUP_ERR_ZQ_CALIBRATION_FAILURE;

	clrbits_le32(&phy0_ctrl->phy_con16, ZQ_CLK_DIV_EN);
	clrbits_le32(&phy1_ctrl->phy_con16, ZQ_CLK_DIV_EN);

	/* DQ Signal */
	writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
	writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);

	val = MEM_TERM_EN \| PHY_TERM_EN;
	writel(val, &drex0->phycontrol0);
	writel(val, &drex1->phycontrol0);

	writel(mem->concontrol \|
	(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) \|
	(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
	&drex0->concontrol);
	writel(mem->concontrol \|
	(mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT) \|
	(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
	&drex1->concontrol);

	do {
	val = readl(&drex0->phystatus);
	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);
	do {
	val = readl(&drex1->phystatus);
	} while ((val & DFI_INIT_COMPLETE) != DFI_INIT_COMPLETE);

	clrbits_le32(&drex0->concontrol, DFI_INIT_START);
	clrbits_le32(&drex1->concontrol, DFI_INIT_START);

	update_reset_dll(drex0, DDR_MODE_DDR3);
	update_reset_dll(drex1, DDR_MODE_DDR3);

	/* Set Base Address:
	* 0x2000_0000 ~ 0x5FFF_FFFF
	* 0x6000_0000 ~ 0x9FFF_FFFF
	*/
	/* MEMBASECONFIG0 */
	val = DMC_MEMBASECONFIGx_CHIP_BASE(DMC_CHIP_BASE_0) \|
	DMC_MEMBASECONFIGx_CHIP_MASK(DMC_CHIP_MASK);
	writel(val, &tzasc0->membaseconfig0);
	writel(val, &tzasc1->membaseconfig0);

	/* MEMBASECONFIG1 */
	val = DMC_MEMBASECONFIGx_CHIP_BASE(DMC_CHIP_BASE_1) \|
	DMC_MEMBASECONFIGx_CHIP_MASK(DMC_CHIP_MASK);
	writel(val, &tzasc0->membaseconfig1);
	writel(val, &tzasc1->membaseconfig1);

	/* Memory Channel Inteleaving Size
	* Exynos5420 Channel interleaving = 128 bytes
	*/
	/* MEMCONFIG0/1 */
	writel(mem->memconfig, &tzasc0->memconfig0);
	writel(mem->memconfig, &tzasc1->memconfig0);
	writel(mem->memconfig, &tzasc0->memconfig1);
	writel(mem->memconfig, &tzasc1->memconfig1);

	/* Precharge Configuration */
	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
	&drex0->prechconfig0);
	writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
	&drex1->prechconfig0);

	/* TimingRow, TimingData, TimingPower and Timingaref
	* values as per Memory AC parameters
	*/
	writel(mem->timing_ref, &drex0->timingref);
	writel(mem->timing_ref, &drex1->timingref);
	writel(mem->timing_row, &drex0->timingrow);
	writel(mem->timing_row, &drex1->timingrow);
	writel(mem->timing_data, &drex0->timingdata);
	writel(mem->timing_data, &drex1->timingdata);
	writel(mem->timing_power, &drex0->timingpower);
	writel(mem->timing_power, &drex1->timingpower);

	if (reset) {
	/* Send NOP, MRS and ZQINIT commands.
	* Sending MRS command will reset the DRAM. We should not be
	* reseting the DRAM after resume, this will lead to memory
	* corruption as DRAM content is lost after DRAM reset.
	*/
	dmc_config_mrs(mem, drex0);
	dmc_config_mrs(mem, drex1);
	} else {
	u32 ret;

	/*
	* During Suspend-Resume & S/W-Reset, as soon as PMU releases
	* pad retention, CKE goes high. This causes memory contents
	* not to be retained during DRAM initialization. Therfore,
	* there is a new control register(0x100431e8[28]) which lets us
	* release pad retention and retain the memory content until the
	* initialization is complete.
	*/
	write32(PAD_RETENTION_DRAM_COREBLK_VAL,
	(void *)PAD_RETENTION_DRAM_COREBLK_OPTION);
	do {
	ret = read32((void *)PAD_RETENTION_DRAM_STATUS);
	} while (ret != 0x1);

	/*
	* CKE PAD retention disables DRAM self-refresh mode.
	* Send auto refresh command for DRAM refresh.
	*/
	for (i = 0; i < 128; i++) {
	writel(DIRECT_CMD_REFA, &drex0->directcmd);
	writel(DIRECT_CMD_REFA \| (0x1 << DIRECT_CMD_CHIP_SHIFT),
	&drex0->directcmd);
	writel(DIRECT_CMD_REFA, &drex1->directcmd);
	writel(DIRECT_CMD_REFA \| (0x1 << DIRECT_CMD_CHIP_SHIFT),
	&drex1->directcmd);
	}
	}

	if (mem->gate_leveling_enable) {

	setbits_le32(&phy0_ctrl->phy_con0, CTRL_ATGATE);
	setbits_le32(&phy1_ctrl->phy_con0, CTRL_ATGATE);

	setbits_le32(&phy0_ctrl->phy_con0, P0_CMD_EN);
	setbits_le32(&phy1_ctrl->phy_con0, P0_CMD_EN);

	val = PHY_CON2_RESET_VAL;
	val \|= INIT_DESKEW_EN;
	writel(val, &phy0_ctrl->phy_con2);
	writel(val, &phy1_ctrl->phy_con2);

	val = PHY_CON0_RESET_VAL;
	val \|= P0_CMD_EN;
	val \|= BYTE_RDLVL_EN;
	writel(val, &phy0_ctrl->phy_con0);
	writel(val, &phy1_ctrl->phy_con0);

	val = readl(&phy0_ctrl->phy_con1);
	val \|= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
	writel(val, &phy0_ctrl->phy_con1);

	val = readl(&phy1_ctrl->phy_con1);
	val \|= (RDLVL_PASS_ADJ_VAL << RDLVL_PASS_ADJ_OFFSET);
	writel(val, &phy1_ctrl->phy_con1);

	nLockR = readl(&phy0_ctrl->phy_con13);
	nLockW_phy0 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
	nLockR = readl(&phy0_ctrl->phy_con12);
	nLockR &= ~CTRL_DLL_ON;
	nLockR \|= nLockW_phy0;
	writel(nLockR, &phy0_ctrl->phy_con12);

	nLockR = readl(&phy1_ctrl->phy_con13);
	nLockW_phy1 = (nLockR & CTRL_LOCK_COARSE_MASK) >> 2;
	nLockR = readl(&phy1_ctrl->phy_con12);
	nLockR &= ~CTRL_DLL_ON;
	nLockR \|= nLockW_phy1;
	writel(nLockR, &phy1_ctrl->phy_con12);

	val = (0x3 << DIRECT_CMD_BANK_SHIFT) \| 0x4;
	writel(val, &drex0->directcmd);
	writel(val \| (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex0->directcmd);
	writel(val, &drex1->directcmd);
	writel(val \| (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex1->directcmd);

	setbits_le32(&phy0_ctrl->phy_con2, RDLVL_GATE_EN);
	setbits_le32(&phy1_ctrl->phy_con2, RDLVL_GATE_EN);

	setbits_le32(&phy0_ctrl->phy_con0, CTRL_SHGATE);
	setbits_le32(&phy1_ctrl->phy_con0, CTRL_SHGATE);

	val = readl(&phy0_ctrl->phy_con1);
	val &= ~(CTRL_GATEDURADJ_MASK);
	writel(val, &phy0_ctrl->phy_con1);

	val = readl(&phy1_ctrl->phy_con1);
	val &= ~(CTRL_GATEDURADJ_MASK);
	writel(val, &phy1_ctrl->phy_con1);

	writel(CTRL_RDLVL_GATE_ENABLE, &drex0->rdlvl_config);
	i = TIMEOUT;
	while (((readl(&drex0->phystatus) & RDLVL_COMPLETE_CHO) !=
	RDLVL_COMPLETE_CHO) && (i > 0)) {
	/*
	* TODO(waihong): Comment on how long this take to
	* timeout
	*/
	udelay(1);
	i--;
	}
	if (!i)
	return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
	writel(CTRL_RDLVL_GATE_DISABLE, &drex0->rdlvl_config);

	writel(CTRL_RDLVL_GATE_ENABLE, &drex1->rdlvl_config);
	i = TIMEOUT;
	while (((readl(&drex1->phystatus) & RDLVL_COMPLETE_CHO) !=
	RDLVL_COMPLETE_CHO) && (i > 0)) {
	/*
	* TODO(waihong): Comment on how long this take to
	* timeout
	*/
	udelay(1);
	i--;
	}
	if (!i)
	return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
	writel(CTRL_RDLVL_GATE_DISABLE, &drex1->rdlvl_config);

	writel(0, &phy0_ctrl->phy_con14);
	writel(0, &phy1_ctrl->phy_con14);

	val = (0x3 << DIRECT_CMD_BANK_SHIFT);
	writel(val, &drex0->directcmd);
	writel(val \| (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex0->directcmd);
	writel(val, &drex1->directcmd);
	writel(val \| (0x1 << DIRECT_CMD_CHIP_SHIFT), &drex1->directcmd);

	/* Common Settings for Leveling */
	val = PHY_CON12_RESET_VAL;
	writel((val + nLockW_phy0), &phy0_ctrl->phy_con12);
	writel((val + nLockW_phy1), &phy1_ctrl->phy_con12);

	setbits_le32(&phy0_ctrl->phy_con2, DLL_DESKEW_EN);
	setbits_le32(&phy1_ctrl->phy_con2, DLL_DESKEW_EN);
	}

	/* Send PALL command */
	dmc_config_prech(mem, drex0);
	dmc_config_prech(mem, drex1);

	writel(mem->memcontrol, &drex0->memcontrol);
	writel(mem->memcontrol, &drex1->memcontrol);

	/* Set DMC Concontrol and enable auto-refresh counter */
	writel(mem->concontrol \| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) \|
	(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
	&drex0->concontrol);
	writel(mem->concontrol \| (mem->aref_en << CONCONTROL_AREF_EN_SHIFT) \|
	(mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
	&drex1->concontrol);

	/* Enable Clock Gating Control for DMC
	* this saves around 25 mw dmc power as compared to the power
	* consumption without these bits enabled
	*/
	setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
	setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);

	return 0;
	}