| /* |
| * This file is part of the superiotool project. |
| * |
| * Copyright (C) 2011 Rudolf Marek <r.marek@assembler.cz> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "superiotool.h" |
| |
| #define DEVICE_ID_REG 0x20 |
| #define DEVICE_REV_REG 0x21 |
| |
| static const struct superio_registers reg_table[] = { |
| {0xb7, "SB7xx", { |
| {NOLDN, NULL, |
| {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a, |
| 0x2b,0x2c,0x2e, 0x2f, EOT}, |
| {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, |
| {0x3, "EC channel 0", |
| {0x30,0x60,0x61, EOT}, |
| {NANA,NANA,NANA,EOT}}, |
| {0x5, "Irda", |
| {0x30,0x60,0x61,0x70, EOT}, |
| {NANA,NANA,NANA,NANA,EOT}}, |
| {0x7, "Keyboard Controller", |
| {0x30, EOT}, |
| {NANA,EOT}}, |
| {0x9, "Mailbox", |
| {0x30,0x60,0x61, EOT}, |
| {NANA,NANA,NANA,EOT}}, |
| {EOT}}}, |
| {0xb8, "SB8xx", { |
| {NOLDN, NULL, |
| {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a, |
| 0x2b,0x2c,0x2e, 0x2f, EOT}, |
| {NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,NANA,EOT}}, |
| {0x3, "EC channel 0", |
| {0x30,0x60,0x61, EOT}, |
| {NANA,NANA,NANA,EOT}}, |
| {0x5, "Irda", |
| {0x30,0x60,0x61,0x70, EOT}, |
| {NANA,NANA,NANA,NANA,EOT}}, |
| {0x7, "Keyboard Controller", |
| {0x30, EOT}, |
| {NANA,EOT}}, |
| {0x9, "Mailbox", |
| {0x30,0x60,0x61, EOT}, |
| {NANA,NANA,NANA,EOT}}, |
| {EOT}}}, |
| {EOT} |
| }; |
| |
| /* same as serverengines */ |
| static void enter_conf_mode_ec(uint16_t port) |
| { |
| OUTB(0x5a, port); |
| } |
| |
| static void exit_conf_mode_ec(uint16_t port) |
| { |
| OUTB(0xa5, port); |
| } |
| |
| uint16_t detect_ec(void) |
| { |
| uint16_t ec_port; |
| struct pci_dev *dev; |
| |
| dev = pci_dev_find(0x1002, 0x439d); |
| |
| if (!dev) { |
| return 0; |
| } |
| |
| /* is EC disabled ? */ |
| if (!(pci_read_byte(dev, 0x40) & (1 << 7))) |
| return 0; |
| |
| ec_port = pci_read_word(dev, 0xa4); |
| |
| if (!(ec_port & 0x1)) |
| return 0; |
| |
| ec_port &= ~0x1; |
| |
| return ec_port; |
| } |
| |
| void probe_idregs_amd(uint16_t port) |
| { |
| uint8_t rev, devid; |
| |
| probing_for("AMD EC", "", port); |
| |
| if (!(port = detect_ec())) |
| return; |
| |
| enter_conf_mode_ec(port); |
| |
| devid = regval(port, DEVICE_ID_REG); |
| rev = regval(port, DEVICE_REV_REG); |
| |
| if (superio_unknown(reg_table, devid)) { |
| if (verbose) |
| printf(NOTFOUND "id=0x%02x, rev=0x%02x\n", devid, rev); |
| exit_conf_mode_ec(port); |
| return; |
| } |
| |
| printf("Found AMD EC %s (id=0x%02x, rev=0x%02x) at 0x%x\n", |
| get_superio_name(reg_table, devid), devid, rev, port); |
| chip_found = 1; |
| |
| dump_superio("AMD EC", reg_table, port, devid, LDN_SEL); |
| |
| exit_conf_mode_ec(port); |
| } |
| |
| void print_amd_chips(void) |
| { |
| print_vendor_chips("AMD EC", reg_table); |
| } |