| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <boot/tables.h> |
| #include <cpu/x86/msr.h> |
| #include <cpu/amd/mtrr.h> |
| #include <device/pci_def.h> |
| #include "SBPLATFORM.h" |
| #include "chip.h" |
| |
| uint64_t uma_memory_base, uma_memory_size; |
| |
| u8 is_dev3_present(void); |
| void set_pcie_dereset(void); |
| void set_pcie_reset(void); |
| void enable_int_gfx(void); |
| |
| /* GPIO6. */ |
| void enable_int_gfx(void) |
| { |
| volatile u8 *gpio_reg; |
| |
| #ifdef UNUSED_CODE |
| RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */ |
| RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */ |
| #endif |
| /* make sure the Acpi MMIO(fed80000) is accessible */ |
| RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0); |
| |
| gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */ |
| |
| *(gpio_reg + 0x6) = 0x1; /* Int_vga_en */ |
| *(gpio_reg + 170) = 0x1; /* gpio_gate */ |
| |
| gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */ |
| |
| *(gpio_reg + 0x6) = 0x8; |
| *(gpio_reg + 170) = 0x0; |
| } |
| |
| void set_pcie_dereset() |
| { |
| } |
| |
| void set_pcie_reset(void) |
| { |
| } |
| |
| u8 is_dev3_present(void) |
| { |
| return 1; |
| } |
| |
| |
| /************************************************* |
| * enable the dedicated function in EAX-785E board. |
| * This function called early than rs780_enable. |
| *************************************************/ |
| static void eax_785e(device_t dev) |
| { |
| /* Leave it for furture use. */ |
| /* struct mainboard_config *mainboard = |
| (struct mainboard_config *)dev->chip_info; */ |
| |
| printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); |
| |
| #if CONFIG_GFXUMA |
| msr_t msr, msr2; |
| |
| /* TOP_MEM: the top of DRAM below 4G */ |
| msr = rdmsr(TOP_MEM); |
| printk |
| (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", |
| __func__, msr.lo, msr.hi); |
| |
| /* TOP_MEM2: the top of DRAM above 4G */ |
| msr2 = rdmsr(TOP_MEM2); |
| printk |
| (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", |
| __func__, msr2.lo, msr2.hi); |
| |
| /* refer to UMA Size Consideration in 780 BDG. */ |
| switch (msr.lo) { |
| case 0x10000000: /* 256M system memory */ |
| uma_memory_size = 0x4000000; /* 64M recommended UMA */ |
| break; |
| |
| case 0x20000000: /* 512M system memory */ |
| uma_memory_size = 0x8000000; /* 128M recommended UMA */ |
| break; |
| |
| default: /* 1GB and above system memory */ |
| uma_memory_size = 0x10000000; /* 256M recommended UMA */ |
| break; |
| } |
| |
| uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ |
| printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", |
| __func__, uma_memory_size, uma_memory_base); |
| |
| /* TODO: TOP_MEM2 */ |
| #else |
| uma_memory_size = 0x8000000; /* 128M recommended UMA */ |
| uma_memory_base = 0x38000000; /* 1GB system memory supposed */ |
| #endif |
| |
| set_pcie_dereset(); |
| enable_int_gfx(); |
| } |
| |
| int add_mainboard_resources(struct lb_memory *mem) |
| { |
| /* UMA is removed from system memory in the northbridge code, but |
| * in some circumstances we want the memory mentioned as reserved. |
| */ |
| #if CONFIG_GFXUMA |
| printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", |
| uma_memory_base, uma_memory_size); |
| lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, |
| uma_memory_size); |
| #endif |
| return 0; |
| } |
| |
| struct chip_operations mainboard_ops = { |
| CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard") |
| .enable_dev = eax_785e, |
| }; |