| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <delay.h> |
| #include <drivers/parade/ps8640/ps8640.h> |
| #include <edid.h> |
| #include <gpio.h> |
| #include <soc/i2c.h> |
| #include <soc/regulator.h> |
| |
| #include "display.h" |
| #include "gpio.h" |
| |
| static void bridge_ps8640_power_on(void) |
| { |
| /* |
| * PS8640 power-on sequence is described in chapter 14, PS8640_DS_V1.4_20200210.docx |
| * - set VDD12 to be 1.2V |
| * - delay 100us |
| * - set VDD33 to be 3.3V |
| * - pull hign PD# |
| * - pull down RST# |
| * - delay 2ms |
| * - pull high RST# |
| * - delay more than 50ms (55ms for margin) |
| * - pull down RST# |
| * - delay more than 50ms (55ms for margin) |
| * - pull high RST# |
| */ |
| |
| /* Set VRF12 to 1.2V and VCN33 to 3.3V */ |
| mainboard_set_regulator_voltage(MTK_REGULATOR_VRF12, 1200000); |
| udelay(100); |
| mainboard_set_regulator_voltage(MTK_REGULATOR_VCN33, 3300000); |
| udelay(200); |
| |
| /* Turn on bridge */ |
| gpio_output(GPIO_EDPBRDG_PWREN, 1); |
| gpio_output(GPIO_EDPBRDG_RST_L, 0); |
| mdelay(2); |
| gpio_output(GPIO_EDPBRDG_RST_L, 1); |
| mdelay(55); |
| gpio_output(GPIO_EDPBRDG_RST_L, 0); |
| mdelay(55); |
| gpio_output(GPIO_EDPBRDG_RST_L, 1); |
| } |
| |
| static int bridge_ps8640_get_edid(u8 i2c_bus, struct edid *edid) |
| { |
| const u8 chip = 0x8; |
| |
| if (ps8640_init(i2c_bus, chip) < 0) { |
| printk(BIOS_ERR, "%s: Can't init PS8640 bridge\n", __func__); |
| return -1; |
| } |
| if (ps8640_get_edid(i2c_bus, chip, edid) < 0) { |
| printk(BIOS_ERR, "%s: Can't get panel's edid\n", __func__); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static struct panel_serializable_data ps8640_data; |
| |
| static struct panel_description ps8640_bridge = { |
| .s = &ps8640_data, |
| .orientation = LB_FB_ORIENTATION_NORMAL, |
| }; |
| |
| struct panel_description *get_ps8640_description(void) |
| { |
| mtk_i2c_bus_init(BRIDGE_I2C, I2C_SPEED_FAST); |
| bridge_ps8640_power_on(); |
| if (bridge_ps8640_get_edid(BRIDGE_I2C, &ps8640_bridge.s->edid) < 0) { |
| printk(BIOS_ERR, "Can't get panel's edid\n"); |
| return NULL; |
| } |
| return &ps8640_bridge; |
| } |