| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config EC_CLEVO_IT5570E |
| bool |
| select EC_ACPI |
| help |
| IT5570E embedded controller in Clevo notebooks |
| |
| if EC_CLEVO_IT5570E |
| |
| config EC_CLEVO_IT5570E_MEM_BASE |
| hex |
| help |
| Memory address for the EC memory region mapped via LGMR |
| |
| config EC_CLEVO_IT5570E_AC_FAN_ALWAYS_ON |
| bool "Fan always on with AC attached" |
| default n |
| help |
| Never turn the fan fully off when AC is attached. |
| |
| This setting can be overridden by cmos option `ac_fan_always_on`. |
| |
| config EC_CLEVO_IT5570E_KBLED_BOOTEFFECT |
| bool "Keyboard boot effect" |
| default n |
| help |
| Enable the "breathing" boot effect of the LED keyboard. |
| |
| This setting can be overridden by cmos option `kbled_booteffect`. |
| |
| config EC_CLEVO_IT5570E_KBLED_TIMEOUT |
| int "Keyboard backlight timeout" |
| default 15 |
| help |
| Keyboard backlight timeout in seconds. 0 keeps the backlight |
| always on. |
| |
| This setting can be overridden by cmos option `kbled_timeout`. |
| |
| config EC_CLEVO_IT5570E_FN_WIN_SWAP |
| bool "Swap Fn/Windows keys" |
| default n |
| help |
| Swap the Fn and Windows key. |
| |
| This setting can be overridden by cmos option `fn_win_swap`. |
| |
| config EC_CLEVO_IT5570E_FLEXICHARGER |
| bool "Flexicharger" |
| default n |
| help |
| Enable the Flexicharger functionality. |
| |
| This setting can be overridden by cmos option `flexicharger`. |
| |
| if EC_CLEVO_IT5570E_FLEXICHARGER |
| |
| config EC_CLEVO_IT5570E_FLEXICHG_START |
| int "Start charge threshold" |
| default 95 |
| help |
| Start charge threshold in percent. |
| |
| This setting can be overridden by cmos option `flexicharger_start`. |
| |
| config EC_CLEVO_IT5570E_FLEXICHG_STOP |
| int "Stop charge threshold" |
| default 100 |
| help |
| Stop charge threshold in percent. |
| |
| This setting can be overridden by cmos option `flexicharger_stop`. |
| |
| endif |
| |
| choice |
| prompt "Camera default state" |
| default EC_CLEVO_IT5570E_CAM_BOOT_STATE_KEEP |
| help |
| Camera default state. |
| |
| This setting can be overridden by cmos option `camera_boot_state`. |
| |
| config EC_CLEVO_IT5570E_CAM_BOOT_STATE_KEEP |
| bool "Keep previous state" |
| |
| config EC_CLEVO_IT5570E_CAM_BOOT_STATE_DISABLE |
| bool "Disable" |
| |
| config EC_CLEVO_IT5570E_CAM_BOOT_STATE_ENABLE |
| bool "Enable" |
| |
| endchoice |
| |
| config EC_CLEVO_IT5570E_CAM_BOOT_STATE |
| int |
| default 0 if EC_CLEVO_IT5570E_CAM_BOOT_STATE_DISABLE |
| default 1 if EC_CLEVO_IT5570E_CAM_BOOT_STATE_ENABLE |
| default 2 |
| |
| choice |
| prompt "Touchpad toggle mode" |
| default EC_CLEVO_IT5570E_TP_TOGGLE_MODE_CTRLALTF9 |
| help |
| There are two modes for the touchpad toggle (Fn-F1): |
| - Ctrl-Alt-F9 mode sends the windows-native touchpad toggle keyboard shortcut. |
| - Keycode mode sends special key codes f7/f8 which can be configured in udev |
| to be handled as touchpad toggle. |
| |
| This setting can be overridden by cmos option `tp_toggle_mode`. |
| |
| config EC_CLEVO_IT5570E_TP_TOGGLE_MODE_CTRLALTF9 |
| bool "Ctrl-Alt-F9" |
| |
| config EC_CLEVO_IT5570E_TP_TOGGLE_MODE_KEYOCDE_F7F8 |
| bool "Keycode f7/f8" |
| |
| endchoice |
| |
| config EC_CLEVO_IT5570E_TP_TOGGLE_MODE |
| int |
| default 0 if EC_CLEVO_IT5570E_TP_TOGGLE_MODE_CTRLALTF9 |
| default 1 if EC_CLEVO_IT5570E_TP_TOGGLE_MODE_KEYOCDE_F7F8 |
| |
| endif |
