blob: 8c251d7fbcd69cc80501142546a6ab96e73c458a [file] [log] [blame]
## SPDX-License-Identifier: GPL-2.0-only
config COMMON_CBFS_SPI_WRAPPER
bool
default n
depends on !ARCH_X86
depends on BOOT_DEVICE_SPI_FLASH
select BOOT_DEVICE_SUPPORTS_WRITES
help
Use common wrapper to interface CBFS to SPI bootrom.
config SPI_FLASH
bool
default y if BOOT_DEVICE_SPI_FLASH && BOOT_DEVICE_SUPPORTS_WRITES
default n
help
Select this option if your chipset driver needs to store certain
data in the SPI flash.
config SPI_SDCARD
bool
default n
help
Select this option if your chipset driver needs to store certain
data in the SPI sdcard.
if SPI_FLASH
# Keep at 0 because lots of boards assume this default.
config BOOT_DEVICE_SPI_FLASH_BUS
int
default 0
help
Which SPI bus the boot device is connected to.
config BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
bool
default y if !COMMON_CBFS_SPI_WRAPPER
default n
depends on BOOT_DEVICE_SPI_FLASH
help
Provide common implementation of the RW boot device that
doesn't provide mmap() operations.
config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES
bool
default n
depends on BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
help
For platforms who do not allow writes to SPI flash in early
stages like romstage. Not selecting this config will result
in the auto-selection of
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if
BOOT_DEVICE_SPI_FLASH_RW_NOMMAP is selected by the platform.
config BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY
bool
default y if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP && !BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES
default n
depends on BOOT_DEVICE_SPI_FLASH_RW_NOMMAP
help
Include the common implementation in all stages, including the
early ones.
config SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS
bool
default y if COMMON_CBFS_SPI_WRAPPER
default n
config SPI_FLASH_INCLUDE_ALL_DRIVERS
bool
default n if SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS
default y
config SPI_FLASH_SMM
bool
depends on HAVE_SMI_HANDLER
help
Select this option if you want SPI flash support in SMM.
config SPI_FLASH_NO_FAST_READ
bool "Disable Fast Read command"
default n
help
Select this option if your setup requires to avoid "fast read"s
from the SPI flash parts.
config SPI_FLASH_ADESTO
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Adesto Technologies.
config SPI_FLASH_AMIC
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by AMIC.
config SPI_FLASH_ATMEL
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Atmel.
config SPI_FLASH_EON
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by EON.
config SPI_FLASH_GIGADEVICE
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Gigadevice.
config SPI_FLASH_MACRONIX
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Macronix.
config SPI_FLASH_SPANSION
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Spansion.
config SPI_FLASH_SST
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by SST.
config SPI_FLASH_STMICRO
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by ST MICRO.
config SPI_FLASH_WINBOND
bool
default y if SPI_FLASH_INCLUDE_ALL_DRIVERS
help
Select this option if your chipset driver needs to store certain
data in the SPI flash and your SPI flash is made by Winbond.
config SPI_FLASH_HAS_VOLATILE_GROUP
bool
default n
help
Allows chipset to group write/erase operations under a single volatile
group.
config SPI_FLASH_EXIT_4_BYTE_ADDR_MODE
bool
default n
help
This will send an Exit 4-Byte Address Mode (E9h) command before the first
access to the SPI flash. On some platforms with SPI flashes larger than 32MB,
the SPI flash may power up in 4-byte addressing mode and this command needs
to be sent before coreboot's 3-byte address commands can be interpreted correctly.
On flashes that don't support 4-byte addressing mode or where it is already
disabled, this command should be a no-op.
config SPI_FLASH_FORCE_4_BYTE_ADDR_MODE
bool
default n
help
This will force coreboot to send addresses as 4-bytes instead of 3-bytes.
On some platforms with SPI flashes larger than 16MB, the SPI flash may need
to remain in 4-byte addressing mode.
endif # SPI_FLASH
config HAVE_EM100PRO_SPI_CONSOLE_SUPPORT
def_bool n