| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <device/pci_def.h> |
| #include <device/device.h> |
| #include <stdlib.h> |
| #include "OEM.h" /* SMBUS0_BASE_ADDRESS */ |
| |
| /* warning: Porting.h includes an open #pragma pack(1) */ |
| #include "Porting.h" |
| #include "AGESA.h" |
| #include "amdlib.h" |
| #include "dimmSpd.h" |
| #include "chip.h" |
| |
| /* uncomment for source level debug - GDB gets really confused otherwise. */ |
| //#pragma optimize ("", off) |
| |
| /** |
| * Read a single SPD byte. If the first byte is being read, set up the |
| * address and offset. Following bytes auto increment. |
| */ |
| static UINT8 readSmbusByte(UINT16 iobase, UINT8 address, char *buffer, |
| int offset, int initial_offset) |
| { |
| unsigned int status = -1; |
| UINT64 time_limit; |
| |
| /* clear status register */ |
| __outbyte(iobase + SMBUS_STATUS_REG, 0x1E); |
| |
| if (offset == initial_offset) { |
| /* Clear slave status, set offset, set slave address and start reading */ |
| __outbyte(iobase + SMBUS_SLAVE_STATUS_REG, 0x3E); |
| __outbyte(iobase + SMBUS_CONTROL_REG, offset); |
| __outbyte(iobase + SMBUS_HOST_CMD_REG, address | READ_BIT); |
| __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_BYTE_COMMAND); |
| } else { |
| /* Issue read command - auto increments to next byte */ |
| __outbyte(iobase + SMBUS_COMMAND_REG, SMBUS_READ_COMMAND); |
| } |
| /* time limit to avoid hanging for unexpected error status */ |
| time_limit = __rdtsc() + MAX_READ_TSC_COUNT; |
| while (__rdtsc() <= time_limit) { |
| status = __inbyte(iobase + SMBUS_STATUS_REG); |
| if ((status & SMBUS_INTERRUPT_MASK) == 0) |
| continue; /* SMBusInterrupt not set, keep waiting */ |
| if ((status & HOSTBUSY_MASK) != 0) |
| continue; /* HostBusy set, keep waiting */ |
| break; |
| } |
| |
| if (status != STATUS__COMPLETED_SUCCESSFULLY) |
| return AGESA_ERROR; |
| |
| buffer[0] = __inbyte(iobase + SMBUS_DATA0_REG); |
| return AGESA_SUCCESS; |
| } |
| |
| static void writePmReg(UINT8 reg, UINT8 data) |
| { |
| __outbyte(PMIO_INDEX_REG, reg); |
| __outbyte(PMIO_DATA_REG, data); |
| } |
| |
| static void setupFch(UINT16 ioBase) |
| { |
| /* set up SMBUS - Set to SMBUS 0 & set base address */ |
| /* For SB800 & Hudson1 to SB900 & Hudson 2/3 */ |
| writePmReg(SMBUS_BAR_HIGH_BYTE, ioBase >> 8); |
| writePmReg(SMBUS_BAR_LOW_BYTE, (ioBase & 0xe0) | 1); |
| |
| /* set SMBus clock to 400 KHz */ |
| __outbyte(ioBase + SMBUS_CLOCK_REG, SMBUS_FREQUENCY_CONST / 400000); |
| } |
| |
| /** |
| * Read one or more SPD bytes from a DIMM. |
| * Start with offset zero and read sequentially. |
| * Reads 128 bytes in 7-8 ms at 400 KHz. |
| */ |
| static UINT8 readspd(UINT16 iobase, UINT8 SmbusSlaveAddress, char *buffer, |
| UINT16 count) |
| { |
| UINT16 index; |
| UINT8 status; |
| UINT8 initial_offset = 0; |
| |
| setupFch(iobase); |
| |
| for (index = initial_offset; index < count; index++) { |
| status = readSmbusByte(iobase, SmbusSlaveAddress, &buffer[index], index, |
| initial_offset); |
| if (status != AGESA_SUCCESS) |
| return status; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * Gets the SMBUS address for an SPD from the array in devicetree.cb |
| * then read the SPD into the supplied buffer. |
| */ |
| AGESA_STATUS agesa_ReadSPD(UINT32 unused1, UINT32 unused2, void *infoptr) |
| { |
| UINT8 spdAddress; |
| AGESA_READ_SPD_PARAMS *info = infoptr; |
| ROMSTAGE_CONST struct device *dev = dev_find_slot(0, PCI_DEVFN(0x18, 2)); |
| ROMSTAGE_CONST struct northbridge_amd_agesa_family14_config *config = NULL; |
| |
| if ((dev == 0) || (dev->chip_info == 0)) |
| return AGESA_ERROR; |
| |
| config = dev->chip_info; |
| if (info->SocketId >= ARRAY_SIZE(config->spdAddrLookup)) |
| return AGESA_ERROR; |
| if (info->MemChannelId >= ARRAY_SIZE(config->spdAddrLookup[0])) |
| return AGESA_ERROR; |
| if (info->DimmId >= ARRAY_SIZE(config->spdAddrLookup[0][0])) |
| return AGESA_ERROR; |
| |
| spdAddress = config->spdAddrLookup |
| [info->SocketId][info->MemChannelId][info->DimmId]; |
| |
| if (spdAddress == 0) |
| return AGESA_ERROR; |
| return readspd(SMBUS0_BASE_ADDRESS, spdAddress, (void *)info->Buffer, 128); |
| } |