src/southbridge/amd/sb700/usb.c - mirrors/cros/chromiumos/third_party/coreboot - Git at Google

 /*
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2010 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */

 #include <console/console.h>
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
 #include <usbdebug.h>
 #include <arch/io.h>
 #include "sb700.h"

 static struct pci_operations lops_pci = {
 	.set_subsystem = pci_dev_set_subsystem,
 };

 static void usb_init(struct device *dev)
 {
 	u8 byte;
 	u16 word;
 	u32 dword;

 	/* 6.1 Enable OHCI0-4 and EHCI Controllers */
 	device_t sm_dev;
 	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
 	byte = pci_read_config8(sm_dev, 0x68);
 	byte |= 0xFF;
 	pci_write_config8(sm_dev, 0x68, byte);

 	/* RPR 6.2 Enables the USB PME Event,Enable USB resume support */
 	byte = pm_ioread(0x61);
 	byte |= 1 << 6;
 	pm_iowrite(0x61, byte);
 	byte = pm_ioread(0x65);
 	byte |= 1 << 2;
 	pm_iowrite(0x65, byte);

 	/* RPR 6.3 Support USB device wakeup from the S4/S5 state */
 	byte = pm_ioread(0x65);
 	byte &= ~(1 << 0);
 	pm_iowrite(0x65, byte);

 	/* RPR 6.5 Enable the USB controller to get reset by any software that generate a PCIRst# condition */
 	byte = pm_ioread(0x65);
 	byte |= (1 << 4);
 	pm_iowrite(0x65, byte);

 	/* USB_ADVANCED_SLEEP_CONTROL */
 	byte = pm_ioread(0x95);
 	byte &= ~(7 << 0);
 	byte |= 6 << 0;		/* Advanced sleep up to 6 uframes */
 	pm_iowrite(0x95, byte);

 	/* RPR 6.10 Disable OHCI MSI Capability. */
 	word = pci_read_config16(dev, 0x40);
 	word |= (0x3 << 8);
 	pci_write_config16(dev, 0x40, word);

 	/* USB-1_OHCI0_Corner Case S3 Wake Up */
 	dword = pci_read_config32(dev, 0x50);
 	dword |= (1 << 16);
 	pci_write_config32(dev, 0x50, dword);
 }

 static void usb_init2(struct device *dev)
 {
 	u32 dword;
 	u32 usb2_bar0;
 	device_t sm_dev;
 	u8 rev;

 	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
 	rev = get_sb700_revision(sm_dev);

 	/* dword = pci_read_config32(dev, 0xf8); */
 	/* dword |= 40; */
 	/* pci_write_config32(dev, 0xf8, dword); */

 	usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
 	printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);

 	/* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */
 	dword = 0x00020F00;
 	write32(usb2_bar0 + 0xC0, dword);

 	/* RPR6.9 Sets In/OUT FIFO threshold for best performance */
 	dword = 0x00400040;
 	write32(usb2_bar0 + 0xA4, dword);

 	/* RPR6.11 Disabling EHCI Advance Asynchronous Enhancement */
 	dword = pci_read_config32(dev, 0x50);
 	dword |= (1 << 28);
 	pci_write_config32(dev, 0x50, dword);

 	/* RPR 6.12 EHCI Advance PHY Power Savings */
 	/* RPR says it is just for A12. CIMM sets it when it is above A11. */
 	/* But it makes the linux crash, so we skip it */
 	dword = pci_read_config32(dev, 0x50);
 	dword |= 1 << 31;
 	pci_write_config32(dev, 0x50, dword);

 	/* RPR6.13 Enabling Fix for EHCI Controller Driver Yellow Sign Issue */
 	/* RPR says it is just for A12. CIMx sets it when it is above A11. */
 	dword = pci_read_config32(dev, 0x50);
 	dword |= (1 << 20);
 	pci_write_config32(dev, 0x50, dword);

 	/* RPR6.15 EHCI Async Park Mode */
 	dword = pci_read_config32(dev, 0x50);
 	dword |= (1 << 23);
 	pci_write_config32(dev, 0x50, dword);

 	/* Each step below causes the linux crashes. Leave them here
 	 * for future debugging. */
 	u8 byte;
 	u16 word;

 	/* RPR6.16 Disable EHCI MSI support */
 	byte = pci_read_config8(dev, 0x50);
 	byte |= (1 << 6);
 	pci_write_config8(dev, 0x50, byte);

 	/* RPR6.17 Disable the EHCI Dynamic Power Saving feature */
 	word = read32(usb2_bar0 + 0xBC);
 	word &= ~(1 << 12);
 	write16(usb2_bar0 + 0xBC, word);

 	/* RPR6.19 USB Controller DMA Read Delay Tolerant. */
 	if (rev >= REV_SB700_A14) {
 		byte = pci_read_config8(dev, 0x50);
 		byte |= (1 << 7);
 		pci_write_config8(dev, 0x50, byte);
 	}

 	/* SB700_A15, USB-2_EHCI_PID_ERROR_CHECKING */
 	if (rev == REV_SB700_A15) {
 		word = pci_read_config16(dev, 0x50);
 		word |= (1 << 9);
 		pci_write_config16(dev, 0x50, word);
 	}

 	/* RPR6.20 Async Park Mode. */
 	/* RPR recommends not to set these bits. */
 	#if 0
 	dword = pci_read_config32(dev, 0x50);
 	dword |= 1 << 23;
 	if (rev >= REV_SB700_A14) {
 		dword &= ~(1 << 2);
 	}
 	pci_write_config32(dev, 0x50, dword);
 	#endif

 	/* RPR6.22 Advance Async Enhancement */
 	/* RPR6.23 USB Periodic Cache Setting */
 	dword = pci_read_config32(dev, 0x50);
 	if (rev == REV_SB700_A12) {
 		dword |= 1 << 28; /* 6.22 */
 		dword |= 1 << 27; /* 6.23 */
 	} else if (rev >= REV_SB700_A14) {
 		dword |= 1 << 3;
 		dword &= ~(1 << 28); /* 6.22 */
 		dword |= 1 << 8;
 		dword &= ~(1 << 27); /* 6.23 */
 	}
 	pci_write_config32(dev, 0x50, dword);
 	printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword);
 }

 static void usb_set_resources(struct device *dev)
 {
 #if CONFIG_USBDEBUG
 	struct resource *res;
 	u32 base;
 	u32 old_debug;

 	old_debug = get_ehci_debug();
 	set_ehci_debug(0);
 #endif
 	pci_dev_set_resources(dev);

 #if CONFIG_USBDEBUG
 	res = find_resource(dev, 0x10);
 	set_ehci_debug(old_debug);
 	if (!res)
 		return;
 	base = res->base;
 	set_ehci_base(base);
 	report_resource_stored(dev, res, "");
 #endif
 }

 static struct device_operations usb_ops = {
 	.read_resources = pci_dev_read_resources,
 	.set_resources = usb_set_resources, /* pci_dev_set_resources, */
 	.enable_resources = pci_dev_enable_resources,
 	.init = usb_init,
 	.scan_bus = 0,
 	.ops_pci = &lops_pci,
 };

 static const struct pci_driver usb_0_driver __pci_driver = {
 	.ops = &usb_ops,
 	.vendor = PCI_VENDOR_ID_ATI,
 	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_0,
 };

 static const struct pci_driver usb_1_driver __pci_driver = {
 	.ops = &usb_ops,
 	.vendor = PCI_VENDOR_ID_ATI,
 	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_1,
 };

 /* the pci id of usb ctrl 0 and 1 are the same. */
 /*
  * static const struct pci_driver usb_3_driver __pci_driver = {
  * 	.ops = &usb_ops,
  * 	.vendor = PCI_VENDOR_ID_ATI,
  * 	.device = PCI_DEVICE_ID_ATI_SB700_USB_19_0,
  * };
  * static const struct pci_driver usb_4_driver __pci_driver = {
  * 	.ops = &usb_ops,
  * 	.vendor = PCI_VENDOR_ID_ATI,
  * 	.device = PCI_DEVICE_ID_ATI_SB700_USB_19_1,
  * };
  */

 static const struct pci_driver usb_4_driver __pci_driver = {
 	.ops = &usb_ops,
 	.vendor = PCI_VENDOR_ID_ATI,
 	.device = PCI_DEVICE_ID_ATI_SB700_USB_20_5,
 };

 static struct device_operations usb_ops2 = {
 	.read_resources = pci_dev_read_resources,
 	.set_resources = usb_set_resources, /* pci_dev_set_resources, */
 	.enable_resources = pci_dev_enable_resources,
 	.init = usb_init2,
 	.scan_bus = 0,
 	.ops_pci = &lops_pci,
 };

 static const struct pci_driver usb_5_driver __pci_driver = {
 	.ops = &usb_ops2,
 	.vendor = PCI_VENDOR_ID_ATI,
 	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_2,
 };
 /*
  * static const struct pci_driver usb_5_driver __pci_driver = {
  * 	.ops = &usb_ops2,
  * 	.vendor = PCI_VENDOR_ID_ATI,
  * 	.device = PCI_DEVICE_ID_ATI_SB700_USB_19_2,
  * };
  */
	/*
	* This file is part of the coreboot project.
	*
	* Copyright (C) 2010 Advanced Micro Devices, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#include <console/console.h>
	#include <device/device.h>
	#include <device/pci.h>
	#include <device/pci_ids.h>
	#include <device/pci_ops.h>
	#include <usbdebug.h>
	#include <arch/io.h>
	#include "sb700.h"

	static struct pci_operations lops_pci = {
	.set_subsystem = pci_dev_set_subsystem,
	};

	static void usb_init(struct device *dev)
	{
	u8 byte;
	u16 word;
	u32 dword;

	/* 6.1 Enable OHCI0-4 and EHCI Controllers */
	device_t sm_dev;
	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
	byte = pci_read_config8(sm_dev, 0x68);
	byte \|= 0xFF;
	pci_write_config8(sm_dev, 0x68, byte);

	/* RPR 6.2 Enables the USB PME Event,Enable USB resume support */
	byte = pm_ioread(0x61);
	byte \|= 1 << 6;
	pm_iowrite(0x61, byte);
	byte = pm_ioread(0x65);
	byte \|= 1 << 2;
	pm_iowrite(0x65, byte);

	/* RPR 6.3 Support USB device wakeup from the S4/S5 state */
	byte = pm_ioread(0x65);
	byte &= ~(1 << 0);
	pm_iowrite(0x65, byte);

	/* RPR 6.5 Enable the USB controller to get reset by any software that generate a PCIRst# condition */
	byte = pm_ioread(0x65);
	byte \|= (1 << 4);
	pm_iowrite(0x65, byte);

	/* USB_ADVANCED_SLEEP_CONTROL */
	byte = pm_ioread(0x95);
	byte &= ~(7 << 0);
	byte \|= 6 << 0; /* Advanced sleep up to 6 uframes */
	pm_iowrite(0x95, byte);

	/* RPR 6.10 Disable OHCI MSI Capability. */
	word = pci_read_config16(dev, 0x40);
	word \|= (0x3 << 8);
	pci_write_config16(dev, 0x40, word);

	/* USB-1_OHCI0_Corner Case S3 Wake Up */
	dword = pci_read_config32(dev, 0x50);
	dword \|= (1 << 16);
	pci_write_config32(dev, 0x50, dword);
	}

	static void usb_init2(struct device *dev)
	{
	u32 dword;
	u32 usb2_bar0;
	device_t sm_dev;
	u8 rev;

	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
	rev = get_sb700_revision(sm_dev);

	/* dword = pci_read_config32(dev, 0xf8); */
	/* dword \|= 40; */
	/* pci_write_config32(dev, 0xf8, dword); */

	usb2_bar0 = pci_read_config32(dev, 0x10) & ~0xFF;
	printk(BIOS_INFO, "usb2_bar0=0x%x\n", usb2_bar0);

	/* RPR6.4 Enables the USB PHY auto calibration resister to match 45ohm resistance */
	dword = 0x00020F00;
	write32(usb2_bar0 + 0xC0, dword);

	/* RPR6.9 Sets In/OUT FIFO threshold for best performance */
	dword = 0x00400040;
	write32(usb2_bar0 + 0xA4, dword);

	/* RPR6.11 Disabling EHCI Advance Asynchronous Enhancement */
	dword = pci_read_config32(dev, 0x50);
	dword \|= (1 << 28);
	pci_write_config32(dev, 0x50, dword);

	/* RPR 6.12 EHCI Advance PHY Power Savings */
	/* RPR says it is just for A12. CIMM sets it when it is above A11. */
	/* But it makes the linux crash, so we skip it */
	dword = pci_read_config32(dev, 0x50);
	dword \|= 1 << 31;
	pci_write_config32(dev, 0x50, dword);

	/* RPR6.13 Enabling Fix for EHCI Controller Driver Yellow Sign Issue */
	/* RPR says it is just for A12. CIMx sets it when it is above A11. */
	dword = pci_read_config32(dev, 0x50);
	dword \|= (1 << 20);
	pci_write_config32(dev, 0x50, dword);

	/* RPR6.15 EHCI Async Park Mode */
	dword = pci_read_config32(dev, 0x50);
	dword \|= (1 << 23);
	pci_write_config32(dev, 0x50, dword);

	/* Each step below causes the linux crashes. Leave them here
	* for future debugging. */
	u8 byte;
	u16 word;

	/* RPR6.16 Disable EHCI MSI support */
	byte = pci_read_config8(dev, 0x50);
	byte \|= (1 << 6);
	pci_write_config8(dev, 0x50, byte);

	/* RPR6.17 Disable the EHCI Dynamic Power Saving feature */
	word = read32(usb2_bar0 + 0xBC);
	word &= ~(1 << 12);
	write16(usb2_bar0 + 0xBC, word);

	/* RPR6.19 USB Controller DMA Read Delay Tolerant. */
	if (rev >= REV_SB700_A14) {
	byte = pci_read_config8(dev, 0x50);
	byte \|= (1 << 7);
	pci_write_config8(dev, 0x50, byte);
	}

	/* SB700_A15, USB-2_EHCI_PID_ERROR_CHECKING */
	if (rev == REV_SB700_A15) {
	word = pci_read_config16(dev, 0x50);
	word \|= (1 << 9);
	pci_write_config16(dev, 0x50, word);
	}

	/* RPR6.20 Async Park Mode. */
	/* RPR recommends not to set these bits. */
	#if 0
	dword = pci_read_config32(dev, 0x50);
	dword \|= 1 << 23;
	if (rev >= REV_SB700_A14) {
	dword &= ~(1 << 2);
	}
	pci_write_config32(dev, 0x50, dword);
	#endif

	/* RPR6.22 Advance Async Enhancement */
	/* RPR6.23 USB Periodic Cache Setting */
	dword = pci_read_config32(dev, 0x50);
	if (rev == REV_SB700_A12) {
	dword \|= 1 << 28; /* 6.22 */
	dword \|= 1 << 27; /* 6.23 */
	} else if (rev >= REV_SB700_A14) {
	dword \|= 1 << 3;
	dword &= ~(1 << 28); /* 6.22 */
	dword \|= 1 << 8;
	dword &= ~(1 << 27); /* 6.23 */
	}
	pci_write_config32(dev, 0x50, dword);
	printk(BIOS_DEBUG, "rpr 6.23, final dword=%x\n", dword);
	}

	static void usb_set_resources(struct device *dev)
	{
	#if CONFIG_USBDEBUG
	struct resource *res;
	u32 base;
	u32 old_debug;

	old_debug = get_ehci_debug();
	set_ehci_debug(0);
	#endif
	pci_dev_set_resources(dev);

	#if CONFIG_USBDEBUG
	res = find_resource(dev, 0x10);
	set_ehci_debug(old_debug);
	if (!res)
	return;
	base = res->base;
	set_ehci_base(base);
	report_resource_stored(dev, res, "");
	#endif
	}

	static struct device_operations usb_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = usb_set_resources, /* pci_dev_set_resources, */
	.enable_resources = pci_dev_enable_resources,
	.init = usb_init,
	.scan_bus = 0,
	.ops_pci = &lops_pci,
	};

	static const struct pci_driver usb_0_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_0,
	};

	static const struct pci_driver usb_1_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_1,
	};

	/* the pci id of usb ctrl 0 and 1 are the same. */
	/*
	* static const struct pci_driver usb_3_driver __pci_driver = {
	* .ops = &usb_ops,
	* .vendor = PCI_VENDOR_ID_ATI,
	* .device = PCI_DEVICE_ID_ATI_SB700_USB_19_0,
	* };
	* static const struct pci_driver usb_4_driver __pci_driver = {
	* .ops = &usb_ops,
	* .vendor = PCI_VENDOR_ID_ATI,
	* .device = PCI_DEVICE_ID_ATI_SB700_USB_19_1,
	* };
	*/

	static const struct pci_driver usb_4_driver __pci_driver = {
	.ops = &usb_ops,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_USB_20_5,
	};

	static struct device_operations usb_ops2 = {
	.read_resources = pci_dev_read_resources,
	.set_resources = usb_set_resources, /* pci_dev_set_resources, */
	.enable_resources = pci_dev_enable_resources,
	.init = usb_init2,
	.scan_bus = 0,
	.ops_pci = &lops_pci,
	};

	static const struct pci_driver usb_5_driver __pci_driver = {
	.ops = &usb_ops2,
	.vendor = PCI_VENDOR_ID_ATI,
	.device = PCI_DEVICE_ID_ATI_SB700_USB_18_2,
	};
	/*
	* static const struct pci_driver usb_5_driver __pci_driver = {
	* .ops = &usb_ops2,
	* .vendor = PCI_VENDOR_ID_ATI,
	* .device = PCI_DEVICE_ID_ATI_SB700_USB_19_2,
	* };
	*/