baytrail: load microcode in bootblock
Start loading microcode in the bootblock. This way
no caching has been set up and cache-as-ram mode
will be running in a validated configruation (with ucode
patch).
BUG=chrome-os-partner:22858
BRANCH=None
TEST=Built and booted. Confirmed microcode is loaded.
Change-Id: I6fd1d8e55bcc9d799b11d9faed771ac50dc120a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171861
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
diff --git a/src/soc/intel/baytrail/bootblock/bootblock.c b/src/soc/intel/baytrail/bootblock/bootblock.c
index 70ccc21..fa0d9ee 100644
--- a/src/soc/intel/baytrail/bootblock/bootblock.c
+++ b/src/soc/intel/baytrail/bootblock/bootblock.c
@@ -22,6 +22,7 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/mtrr.h>
#include <baytrail/iosf.h>
+#include <cpu/intel/microcode/microcode.c>
static void set_var_mtrr(int reg, uint32_t base, uint32_t size, int type)
{
@@ -49,12 +50,10 @@
wrmsr(MTRRdefType_MSR, msr);
}
-static void bootblock_cpu_init(void)
+static void setup_mmconfig(void)
{
uint32_t reg;
- enable_rom_caching();
-
/* Set up the MMCONF range. The register lives in the BUNIT. The
* IO variant of the config access needs to be used initially to
* properly configure as the IOSF access registers live in PCI
@@ -68,3 +67,13 @@
IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN;
pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg);
}
+
+static void bootblock_cpu_init(void)
+{
+ /* Allow memory-mapped PCI config access. */
+ setup_mmconfig();
+
+ /* Load microcode before any caching. */
+ intel_update_microcode_from_cbfs();
+ enable_rom_caching();
+}
