| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Christoph Grenz <christophg+cb@grenz-bonn.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* |
| * include this file into a mainboards DSDT inside the PCI device |
| * "K8 Miscellaneous Control" and it will expose the temperature |
| * sensors of the processor as thermal zones. |
| * |
| * If, for example, the K8 Misc. Control device is on 0:18.3, include the |
| * following inside the PCI0 device: |
| * |
| * Device(K8MC) { |
| * Name (_ADR, 0x00180003) |
| * #include northbridge/amd/amdk8/thermal_mixin.asl |
| * } |
| * |
| * Note: as only the current temperature and the trip temperature for |
| * "Software Thermal Control" are available in the PCI registers, but the |
| * linux driver for thermal zones needs a critical temperature value, a |
| * reasonable critical temperature is calculated by simply adding 6°C to |
| * the trip temperature. |
| * |
| * The used registers are documented in the "BIOS and Kernel Developer's |
| * Guide for AMD NPT Family 0Fh Processors" |
| * http://support.amd.com/us/Processor_TechDocs/32559.pdf |
| * |
| */ |
| |
| #ifndef K8TEMP_CRITICAL_ADD |
| # define K8TEMP_CRITICAL_ADD 6 |
| #endif |
| |
| OperationRegion(K8TR, PCI_Config, 0xE4, 0x4) |
| Field(K8TR, DWordAcc, NoLock, Preserve) { |
| , 1, |
| THTP, 1, /* Temperature sensor trip occured */ |
| CORE, 1, /* Select Core */ |
| TTS0, 1, /* Temperature sensor trip on CPU1 (or single core CPU0) */ |
| TTS1, 1, /* Temperature sensor trip on CPU0 */ |
| TTEN, 1, /* Temperature sensor trip enabled */ |
| PLAC, 1, /* Select Sensor */ |
| , 1, |
| DOFF, 6, /* Diode offset (signed 6bit-Integer) in °C */ |
| TFRC, 2, /* Temperature fractions */ |
| TVAL, 8, /* Temperature value in °C biased by -49 */ |
| TJOF, 5, |
| , 2, |
| SWTT, 1, /* Induce a thermtrip event (for diagnostic purposes) */ |
| } |
| |
| OperationRegion(K8ST, PCI_Config, 0x70, 0x1) |
| Field(K8ST, ByteAcc, NoLock, Preserve) { |
| TMAX, 5, /* Maximum temperature for software thermal control, in °C, biased by 52 */ |
| } |
| |
| /* Calculates temperature in tenths Kelvin from given TVAL and TFRC values */ |
| Method(K8PT, 2) { |
| Divide(Multiply(Arg1, 5), 2, , Local0) |
| Return (Add(Multiply(Add(Arg0, 224),10), Local0)) |
| } |
| |
| /* Calculates the diode offset from a DOFF value */ |
| Method(K8PO, 1) { |
| If (And(Arg0, 0x20)) |
| { |
| Return (Multiply(Subtract(Xor(Arg0, 0x3F), 1), 10)) |
| } |
| Else { |
| Return (Multiply(Arg0, 10)) |
| } |
| } |
| |
| ThermalZone (K8T0) { |
| Name(_HID, EisaId("PNP0C11")) |
| Name(_UID, "k8-0") |
| Name(_STR, Unicode("K8 compatible CPU Core 1 Thermal Sensor 1")) |
| |
| Method(_STA) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(Zero, PLAC) |
| If (LOr(PLAC, CORE)) { |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x00) |
| } |
| |
| If (LOr(LNot(TVAL), LEqual(TVAL, 0xFF))) { |
| Return (0x00) |
| } |
| |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x0F) |
| } |
| |
| Method(_TMP) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(Zero, PLAC) |
| |
| Store (K8PT(TVAL, TFRC), Local2) |
| Add (K8PO(DOFF), Local2, Local2) |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| |
| Return (Local2) |
| } |
| |
| Method(_CRT) { |
| Add(TMAX, 325, Local0) |
| Add(Local0, K8TEMP_CRITICAL_ADD, Local0) |
| Return (Multiply(Local0, 10)) |
| } |
| } |
| |
| ThermalZone (K8T1) { |
| Name(_HID, EisaId("PNP0C11")) |
| Name(_UID, "k8-1") |
| Name(_STR, Unicode("K8 compatible CPU Core 1 Thermal Sensor 2")) |
| |
| Name(_TZD, Package () {\_PR.CPU0}) |
| |
| Method(_STA) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(Zero, PLAC) |
| If (LOr(PLAC, CORE)) { |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x00) |
| } |
| |
| Store(One, PLAC) |
| If (LOr(LNot(TVAL), LEqual(TVAL, 0xFF))) { |
| Return (0x00) |
| } |
| |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x0F) |
| } |
| |
| Method(_TMP) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(One, PLAC) |
| |
| Store (K8PT(TVAL, TFRC), Local2) |
| Add (K8PO(DOFF), Local2, Local2) |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| |
| Return (Local2) |
| } |
| |
| Method(_CRT) { |
| Add(TMAX, 325, Local0) |
| Add(Local0, K8TEMP_CRITICAL_ADD, Local0) |
| Return (Multiply(Local0, 10)) |
| } |
| } |
| |
| ThermalZone (K8T2) { |
| Name(_HID, EisaId("PNP0C11")) |
| Name(_UID, "k8-2") |
| Name(_STR, Unicode("K8 compatible CPU Core 2 Thermal Sensor 1")) |
| |
| Name(_TZD, Package () {\_PR.CPU0}) |
| |
| Method(_STA) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(Zero, PLAC) |
| If (LOr(PLAC, CORE)) { |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x00) |
| } |
| |
| Store(One, CORE) |
| If (LOr(LNot(TVAL), LEqual(TVAL, 0xFF))) { |
| Return (0x00) |
| } |
| |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x0F) |
| } |
| |
| Method(_TMP) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(One, CORE) |
| Store(Zero, PLAC) |
| |
| Store (K8PT(TVAL, TFRC), Local2) |
| Add (K8PO(DOFF), Local2, Local2) |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| |
| Return (Local2) |
| } |
| |
| Method(_CRT) { |
| Add(TMAX, 325, Local0) |
| Add(Local0, K8TEMP_CRITICAL_ADD, Local0) |
| Return (Multiply(Local0, 10)) |
| } |
| } |
| |
| ThermalZone (K8T3) { |
| Name(_HID, EisaId("PNP0C11")) |
| Name(_UID, "k8-3") |
| Name(_STR, Unicode("K8 compatible CPU Core 2 Thermal Sensor 2")) |
| |
| Name(_TZD, Package () {\_PR.CPU0}) |
| |
| Method(_STA) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(Zero, CORE) |
| Store(Zero, PLAC) |
| If (LOr(PLAC, CORE)) { |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x00) |
| } |
| |
| Store(One, CORE) |
| Store(One, PLAC) |
| If (LOr(LNot(TVAL), LEqual(TVAL, 0xFF))) { |
| Return (0x00) |
| } |
| |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| Return (0x0F) |
| } |
| |
| Method(_TMP) { |
| Store(CORE, Local0) |
| Store(PLAC, Local1) |
| |
| Store(One, CORE) |
| Store(One, PLAC) |
| |
| Store (K8PT(TVAL, TFRC), Local2) |
| Add (K8PO(DOFF), Local2, Local2) |
| Store(Local0, CORE) |
| Store(Local1, PLAC) |
| |
| Return (Local2) |
| } |
| |
| Method(_CRT) { |
| Add(TMAX, 325, Local0) |
| Add(Local0, K8TEMP_CRITICAL_ADD, Local0) |
| Return (Multiply(Local0, 10)) |
| } |
| } |