src/mainboard/amd/serengeti_cheetah/irq_tables.c

/* This file was generated by getpir.c, do not modify!
   (but if you do, please run checkpir on it to verify)
   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up

   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <arch/pirq_routing.h>
#include <cpu/amd/amdk8_sysconf.h>

#include "mb_sysconf.h"

static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
		uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
		uint8_t slot, uint8_t rfu)
{
        pirq_info->bus = bus;
        pirq_info->devfn = devfn;

	pirq_info->irq[0].link = link0;
	pirq_info->irq[0].bitmap = bitmap0;
	pirq_info->irq[1].link = link1;
	pirq_info->irq[1].bitmap = bitmap1;
	pirq_info->irq[2].link = link2;
	pirq_info->irq[2].bitmap = bitmap2;
	pirq_info->irq[3].link = link3;
	pirq_info->irq[3].bitmap = bitmap3;

	pirq_info->slot = slot;
        pirq_info->rfu = rfu;
}




unsigned long write_pirq_routing_table(unsigned long addr)
{

	struct irq_routing_table *pirq;
	struct irq_info *pirq_info;
	unsigned slot_num;
	uint8_t *v;

        uint8_t sum=0;
        int i;

	struct mb_sysconf_t *m;

	get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c

	m = sysconf.mb;

        /* Align the table to be 16 byte aligned. */
        addr += 15;
        addr &= ~15;

        /* This table must be betweeen 0xf0000 & 0x100000 */
        printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);

	pirq = (void *)(addr);
	v = (uint8_t *)(addr);

	pirq->signature = PIRQ_SIGNATURE;
	pirq->version  = PIRQ_VERSION;

	pirq->rtr_bus = m->bus_8111_0;
	pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;

	pirq->exclusive_irqs = 0;

	pirq->rtr_vendor = 0x1022;
	pirq->rtr_device = 0x746b;

	pirq->miniport_data = 0;

	memset(pirq->rfu, 0, sizeof(pirq->rfu));

	pirq_info = (void *) ( &pirq->checksum + 1);
	slot_num = 0;

        {
                device_t dev;
                dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn+1,3));
                if (dev) {
                        /* initialize PCI interupts - these assignments depend
                        on the PCB routing of PINTA-D

                        PINTA = IRQ3
                        PINTB = IRQ5
                        PINTC = IRQ10
                        PINTD = IRQ11
                        */
                        pci_write_config16(dev, 0x56, 0xba53);
                }
        }

//pci bridge
        printk(BIOS_DEBUG, "setting Onboard AMD Southbridge \n");
        static const unsigned char slotIrqs_1_4[4] = { 3, 5, 10, 11 };
        pci_assign_irqs(m->bus_8111_0, sysconf.sbdn+1, slotIrqs_1_4);
	write_pirq_info(pirq_info, m->bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
	pirq_info++; slot_num++;

        printk(BIOS_DEBUG, "setting Onboard AMD USB \n");
        static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 11};
        pci_assign_irqs(m->bus_8111_1, 0, slotIrqs_8111_1_0);
        write_pirq_info(pirq_info, m->bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0);
        pirq_info++; slot_num++;

//pcix bridge
//        write_pirq_info(pirq_info, m->bus_8132_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
//        pirq_info++; slot_num++;

	int j = 0;

        for(i=1; i< sysconf.hc_possible_num; i++) {
                if(!(sysconf.pci1234[i] & 0x1) ) continue;
                unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff;
                unsigned devn = sysconf.hcdn[i] & 0xff;

                write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
                pirq_info++; slot_num++;
                j++;

        }

	pirq->size = 32 + 16 * slot_num;

        for (i = 0; i < pirq->size; i++)
                sum += v[i];

	sum = pirq->checksum - sum;

        if (sum != pirq->checksum) {
                pirq->checksum = sum;
        }

	printk(BIOS_INFO, "done.\n");

	return	(unsigned long) pirq_info;

}