| config SOC_INTEL_COMMON_SKYLAKE_BASE |
| bool |
| |
| config SOC_INTEL_SKYLAKE |
| bool |
| select SOC_INTEL_COMMON_SKYLAKE_BASE |
| |
| config SOC_INTEL_KABYLAKE |
| bool |
| select SOC_INTEL_COMMON_SKYLAKE_BASE |
| |
| config SOC_INTEL_SKYLAKE_LGA1151_V2 |
| bool |
| select PLATFORM_USES_FSP2_1 |
| select SOC_INTEL_COMMON_SKYLAKE_BASE |
| select SKYLAKE_SOC_PCH_H |
| help |
| Selected by mainboards with a LGA1151 v2 socket and a Z370, H310C or B365 PCH |
| |
| if SOC_INTEL_COMMON_SKYLAKE_BASE |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ACPI_NHLT |
| select ARCH_X86 |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| select CACHE_MRC_SETTINGS |
| select CPU_INTEL_COMMON |
| select CPU_INTEL_FIRMWARE_INTERFACE_TABLE |
| select CPU_SUPPORTS_PM_TIMER_EMULATION |
| select FSP_COMPRESS_FSP_S_LZ4 |
| select FSP_M_XIP |
| select FSP_STATUS_GLOBAL_RESET_REQUIRED_3 |
| select GENERIC_GPIO_LIB |
| select HAVE_FSP_GOP |
| select HAVE_FSP_LOGO_SUPPORT |
| select HAVE_INTEL_FSP_REPO |
| select INTEL_CAR_NEM_ENHANCED |
| select HAVE_SMI_HANDLER |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_ADD_VBT if RUN_FSP_GOP |
| select MRC_SETTINGS_PROTECT |
| select PARALLEL_MP_AP_WORK |
| select PLATFORM_USES_FSP2_0 |
| select PMC_GLOBAL_RESET_ENABLE_LOCK |
| select SA_ENABLE_DPR |
| select SOC_INTEL_COMMON |
| select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE |
| select SOC_INTEL_COMMON_BLOCK |
| select SOC_INTEL_COMMON_BLOCK_ACPI |
| select SOC_INTEL_COMMON_BLOCK_ACPI_CPPC |
| select SOC_INTEL_COMMON_BLOCK_ACPI_GPIO |
| select SOC_INTEL_COMMON_BLOCK_ACPI_LPIT |
| select SOC_INTEL_COMMON_BLOCK_ACPI_PEP |
| select SOC_INTEL_COMMON_BLOCK_CAR |
| select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG |
| select SOC_INTEL_COMMON_BLOCK_CPU |
| select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT |
| select SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE |
| select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL |
| select SOC_INTEL_COMMON_BLOCK_GSPI |
| select SOC_INTEL_COMMON_BLOCK_HDA |
| select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR |
| select SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE |
| select SOC_INTEL_COMMON_BLOCK_SA |
| select SOC_INTEL_COMMON_BLOCK_SCS |
| select SOC_INTEL_COMMON_BLOCK_SGX |
| select SOC_INTEL_COMMON_BLOCK_SGX_LOCK_MEMORY |
| select SOC_INTEL_COMMON_BLOCK_SMM |
| select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP |
| select SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV |
| select SOC_INTEL_COMMON_BLOCK_UART |
| select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG |
| select SOC_INTEL_COMMON_FSP_RESET |
| select SOC_INTEL_COMMON_PCH_BASE |
| select SOC_INTEL_COMMON_NHLT |
| select SOC_INTEL_COMMON_RESET |
| select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT |
| select SOC_INTEL_CONFIGURE_DDI_A_4_LANES |
| select SSE2 |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| select TSC_MONOTONIC_TIMER |
| select TSC_SYNC_MFENCE |
| select UDELAY_TSC |
| select UDK_2017_BINDING |
| select USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM |
| select USE_FSP_NOTIFY_PHASE_READY_TO_BOOT |
| select USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE |
| |
| config MAX_HECI_DEVICES |
| int |
| default 5 |
| |
| config MAX_CPUS |
| int |
| default 16 if MAINBOARD_SUPPORTS_COFFEELAKE_CPU |
| default 8 |
| |
| config FSP_HYPERTHREADING |
| bool "Enable Hyper-Threading" |
| default y |
| |
| config ENABLE_SATA_TEST_MODE |
| bool "Enable SATA test mode" |
| default n |
| help |
| Enable SATA test mode in FSP-S. |
| |
| config CPU_INTEL_NUM_FIT_ENTRIES |
| int |
| default 10 |
| |
| config VBOOT |
| select VBOOT_SEPARATE_VERSTAGE |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| |
| config CBFS_SIZE |
| default 0x200000 |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfef00000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x40000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x20400 if FSP_USES_CB_STACK |
| default 0x4000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| depends on FSP_USES_CB_STACK |
| default 0x10000 |
| help |
| The amount of anticipated heap usage in CAR by FSP. |
| Refer to Platform FSP integration guide document to know |
| the exact FSP requirement for Heap setup. |
| |
| config EXCLUDE_NATIVE_SD_INTERFACE |
| bool |
| default n |
| help |
| If you set this option to n, will not use native SD controller. |
| |
| config HEAP_SIZE |
| hex |
| default 0x80000 |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x200000 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 |
| |
| config VGA_BIOS_ID |
| string |
| default "8086,0406" |
| |
| config SKYLAKE_SOC_PCH_H |
| bool |
| default n |
| |
| config NHLT_DMIC_1CH |
| bool |
| default n |
| help |
| Include DSP firmware settings for 1 channel DMIC array. |
| |
| config NHLT_DMIC_2CH |
| bool |
| default n |
| help |
| Include DSP firmware settings for 2 channel DMIC array. |
| |
| config NHLT_DMIC_4CH |
| bool |
| default n |
| help |
| Include DSP firmware settings for 4 channel DMIC array. |
| |
| config NHLT_NAU88L25 |
| bool |
| default n |
| help |
| Include DSP firmware settings for nau88l25 headset codec. |
| |
| config NHLT_MAX98357 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98357 amplifier. |
| |
| config NHLT_MAX98373 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98373 amplifier. |
| |
| config NHLT_SSM4567 |
| bool |
| default n |
| help |
| Include DSP firmware settings for ssm4567 smart amplifier. |
| |
| config NHLT_RT5514 |
| bool |
| default n |
| help |
| Include DSP firmware settings for rt5514 DSP. |
| |
| config NHLT_RT5663 |
| bool |
| default n |
| help |
| Include DSP firmware settings for rt5663 headset codec. |
| |
| config NHLT_MAX98927 |
| bool |
| default n |
| help |
| Include DSP firmware settings for max98927 amplifier. |
| |
| config NHLT_DA7219 |
| bool |
| default n |
| help |
| Include DSP firmware settings for DA7219 headset codec. |
| |
| # Use KabylakeFsp for both Skylake and Kabylake as it supports both. |
| # SkylakeFsp is FSP 1.1 and therefore incompatible. |
| config FSP_HEADER_PATH |
| default "3rdparty/fsp/AmberLakeFspBinPkg/Include/" if SOC_INTEL_SKYLAKE_LGA1151_V2 |
| default "3rdparty/fsp/KabylakeFspBinPkg/Include/" |
| |
| config FSP_FD_PATH |
| default "3rdparty/fsp/AmberLakeFspBinPkg/Fsp.fd" if SOC_INTEL_SKYLAKE_LGA1151_V2 |
| default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" |
| |
| config MAX_ROOT_PORTS |
| int |
| default 24 |
| |
| config NO_FADT_8042 |
| bool |
| default n |
| help |
| Choose this option if you want to disable 8042 Keyboard |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| int |
| default 120 |
| |
| config CPU_XTAL_HZ |
| default 24000000 |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_MAX |
| int |
| default 2 |
| |
| config SOC_INTEL_I2C_DEV_MAX |
| int |
| default 6 |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| hex |
| default 0xfe030000 |
| depends on INTEL_LPSS_UART_FOR_CONSOLE |
| |
| # Clock divider parameters for 115200 baud rate |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL |
| hex |
| default 0x30 |
| |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL |
| hex |
| default 0xc35 |
| |
| config CHIPSET_DEVICETREE |
| string |
| default "soc/intel/skylake/chipset.cb" |
| |
| config IFD_CHIPSET |
| string |
| default "sklkbl" |
| |
| config INTEL_TXT_BIOSACM_ALIGNMENT |
| hex |
| default 0x40000 # 256KB |
| |
| config MAINBOARD_SUPPORTS_SKYLAKE_CPU |
| bool "Board can contain Skylake CPU" |
| default !SOC_INTEL_SKYLAKE_LGA1151_V2 |
| |
| if SKYLAKE_SOC_PCH_H |
| |
| config MAINBOARD_SUPPORTS_KABYLAKE_CPU |
| bool "Board can contain Kaby Lake CPU" |
| default !SOC_INTEL_SKYLAKE_LGA1151_V2 && SOC_INTEL_KABYLAKE |
| |
| config MAINBOARD_SUPPORTS_COFFEELAKE_CPU |
| bool "Board can contain Coffee Lake CPU" |
| default y if SOC_INTEL_SKYLAKE_LGA1151_V2 |
| |
| endif |
| |
| if !SKYLAKE_SOC_PCH_H |
| |
| config MAINBOARD_SUPPORTS_KABYLAKE_DUAL |
| bool "Board can contain Kaby Lake DUAL core" |
| default y |
| |
| config MAINBOARD_SUPPORTS_KABYLAKE_QUAD |
| bool "Board can contain Kaby Lake QUAD core" |
| default y |
| |
| endif |
| |
| endif |
