| /* |
| * This file is part of the coreboot project. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #if CONFIG_K8_REV_F_SUPPORT |
| #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 |
| #endif |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ids.h> |
| #include <arch/io.h> |
| #include <device/pnp_def.h> |
| #include <cpu/x86/lapic.h> |
| #include <pc80/mc146818rtc.h> |
| #include <console/console.h> |
| #include <lib.h> |
| #include <spd.h> |
| #include <cpu/amd/model_fxx_rev.h> |
| #include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN |
| #include "northbridge/amd/amdk8/raminit.h" |
| #include "lib/delay.c" |
| #include "cpu/x86/lapic/boot_cpu.c" |
| #include "northbridge/amd/amdk8/reset_test.c" |
| #include "superio/winbond/w83627hf/early_serial.c" |
| #include "superio/winbond/w83627hf/early_init.c" |
| #include "cpu/x86/bist.h" |
| #include "northbridge/amd/amdk8/debug.c" |
| #include "cpu/x86/mtrr/earlymtrr.c" |
| #include "northbridge/amd/amdk8/setup_resource_map.c" |
| #include "southbridge/nvidia/mcp55/early_ctrl.c" |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) |
| #define DUMMY_DEV PNP_DEV(0x2e, 0) |
| |
| static void memreset(int controllers, const struct mem_controller *ctrl) { } |
| |
| static inline void dump_smbus_registers(void) |
| { |
| u32 device; |
| |
| print_debug("\n"); |
| for (device = 1; device < 0x80; device++) { |
| int j; |
| if (smbus_read_byte(device, 0) < 0) |
| continue; |
| printk(BIOS_DEBUG, "smbus: %02x", device); |
| for (j = 0; j < 256; j++) { |
| int status; |
| unsigned char byte; |
| status = smbus_read_byte(device, j); |
| if (status < 0) { |
| break; |
| } |
| if ((j & 0xf) == 0) { |
| printk(BIOS_DEBUG, "\n%02x: ", j); |
| } |
| byte = status & 0xff; |
| printk(BIOS_DEBUG, "%02x ", byte); |
| } |
| print_debug("\n"); |
| } |
| } |
| |
| static inline void activate_spd_rom(const struct mem_controller *ctrl) |
| { |
| #if 0 |
| /* We don't do any switching yet. */ |
| #define SMBUS_SWITCH1 0x48 |
| #define SMBUS_SWITCH2 0x49 |
| unsigned device=(ctrl->channel0[0])>>8; |
| smbus_send_byte(SMBUS_SWITCH1, device); |
| smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); |
| #endif |
| } |
| |
| #if 0 |
| static int smbus_send_byte_one(unsigned device, unsigned char val) |
| { |
| return do_smbus_send_byte(SMBUS1_IO_BASE, device, val); |
| } |
| |
| static inline void change_i2c_mux(unsigned device) |
| { |
| #define SMBUS_SWITCH1 0x48 |
| #define SMBUS_SWITHC2 0x49 |
| smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); |
| smbus_send_byte_one(SMBUS_SWITCH2, (device >> 4) & 0x0f); |
| int ret; |
| print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); |
| dump_smbus_registers(); |
| ret = smbus_send_byte(SMBUS_SWITCH1, device); |
| print_debug("change_i2c_mux ret="); print_debug_hex32(ret); print_debug("\n"); |
| dump_smbus_registers(); |
| ret = smbus_send_byte_one(SMBUS_SWITCH2, device); |
| print_debug("change_i2c_mux ret="); print_debug_hex32(ret); print_debug("\n"); |
| dump_smbus_registers(); |
| } |
| #endif |
| |
| static inline int spd_read_byte(unsigned device, unsigned address) |
| { |
| return smbus_read_byte(device, address); |
| } |
| |
| #include "northbridge/amd/amdk8/f.h" |
| #include "northbridge/amd/amdk8/incoherent_ht.c" |
| #include "northbridge/amd/amdk8/coherent_ht.c" |
| #include "northbridge/amd/amdk8/raminit_f.c" |
| #include "lib/generic_sdram.c" |
| #include "resourcemap.c" |
| #include "cpu/amd/dualcore/dualcore.c" |
| #include "southbridge/nvidia/mcp55/early_setup_ss.h" |
| #include "southbridge/nvidia/mcp55/early_setup_car.c" |
| #include "cpu/amd/car/post_cache_as_ram.c" |
| #include "cpu/amd/model_fxx/init_cpus.c" |
| #include "cpu/amd/model_fxx/fidvid.c" |
| #include "northbridge/amd/amdk8/early_ht.c" |
| |
| static void sio_setup(void) |
| { |
| uint32_t dword; |
| uint8_t byte; |
| |
| enable_smbus(); |
| // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ |
| smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ |
| |
| byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); |
| byte |= 0x20; |
| pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); |
| |
| dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); |
| dword |= (1 << 0); |
| pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); |
| |
| dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); |
| dword |= (1 << 16); |
| pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); |
| } |
| |
| /* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ |
| #define RC0 (2<<8) |
| #define RC1 (1<<8) |
| |
| void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) |
| { |
| /* The SPD is being read from the CPU1 (marked CPU2 on the board) and we |
| don't know how to switch the SMBus to decode the CPU0 SPDs. So, The |
| memory on each CPU must be an exact match. |
| */ |
| static const uint16_t spd_addr[] = { |
| // Node 0 |
| RC0 | DIMM0, RC0 | DIMM2, |
| RC0 | DIMM4, RC0 | DIMM6, |
| RC0 | DIMM1, RC0 | DIMM3, |
| RC0 | DIMM5, RC0 | DIMM7, |
| // Node 1 |
| RC1 | DIMM0, RC1 | DIMM2, |
| RC1 | DIMM4, RC1 | DIMM6, |
| RC1 | DIMM1, RC1 | DIMM3, |
| RC1 | DIMM5, RC1 | DIMM7, |
| }; |
| |
| struct sys_info *sysinfo = &sysinfo_car; |
| int needs_reset = 0; |
| unsigned bsp_apicid = 0; |
| |
| if (!cpu_init_detectedx && boot_cpu()) { |
| /* Nothing special needs to be done to find bus 0 */ |
| /* Allow the HT devices to be found */ |
| enumerate_ht_chain(); |
| sio_setup(); |
| } |
| |
| if (bist == 0) |
| bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); |
| |
| w83627hf_set_clksel_48(DUMMY_DEV); |
| w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); |
| |
| setup_mb_resource_map(); |
| |
| print_debug("bsp_apicid="); |
| print_debug_hex8(bsp_apicid); |
| print_debug("\n"); |
| |
| #if CONFIG_MEM_TRAIN_SEQ == 1 |
| set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram |
| #endif |
| /* dump_smbus_registers(); */ |
| setup_coherent_ht_domain(); // routing table and start other core0 |
| |
| wait_all_core0_started(); |
| #if CONFIG_LOGICAL_CPUS |
| // It is said that we should start core1 after all core0 launched |
| /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, |
| * So here need to make sure last core0 is started, esp for two way system, |
| * (there may be apic id conflicts in that case) |
| */ |
| start_other_cores(); |
| wait_all_other_cores_started(bsp_apicid); |
| #endif |
| |
| /* it will set up chains and store link pair for optimization later */ |
| ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn |
| |
| #if CONFIG_SET_FIDVID |
| { |
| msr_t msr; |
| msr = rdmsr(0xc0010042); |
| print_debug("begin msr fid, vid "); |
| print_debug_hex32(msr.hi); |
| print_debug_hex32(msr.lo); |
| print_debug("\n"); |
| } |
| enable_fid_change(); |
| enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); |
| init_fidvid_bsp(bsp_apicid); |
| // show final fid and vid |
| { |
| msr_t msr; |
| msr = rdmsr(0xc0010042); |
| print_debug("end msr fid, vid "); |
| print_debug_hex32(msr.hi); |
| print_debug_hex32(msr.lo); |
| print_debug("\n"); |
| } |
| #endif |
| |
| init_timer(); /* Need to use TMICT to synconize FID/VID. */ |
| |
| needs_reset |= optimize_link_coherent_ht(); |
| needs_reset |= optimize_link_incoherent_ht(sysinfo); |
| needs_reset |= mcp55_early_setup_x(); |
| |
| // fidvid change will issue one LDTSTOP and the HT change will be effective too |
| if (needs_reset) { |
| print_info("ht reset -\n"); |
| soft_reset(); |
| } |
| |
| allow_all_aps_stop(bsp_apicid); |
| |
| //It's the time to set ctrl in sysinfo now; |
| fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); |
| |
| enable_smbus(); /* enable in sio_setup */ |
| |
| /* all ap stopped? */ |
| |
| sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); |
| |
| post_cache_as_ram(); // bsp swtich stack to ram and copy sysinfo ram now |
| } |