| #include <console/console.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <string.h> |
| #include <stdint.h> |
| #if CONFIG_LOGICAL_CPUS |
| #include <cpu/amd/multicore.h> |
| #endif |
| #include <stdlib.h> |
| #include <cpu/amd/amdk8_sysconf.h> |
| |
| |
| // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables |
| //busnum is default |
| unsigned char bus_ck804_0; //1 |
| unsigned char bus_ck804_1; //2 |
| unsigned char bus_ck804_2; //3 |
| unsigned char bus_ck804_3; //4 |
| unsigned char bus_ck804_4; //5 |
| unsigned char bus_ck804_5; //6 |
| unsigned char bus_8131_0; //7 |
| unsigned char bus_8131_1; //8 |
| unsigned char bus_8131_2; //9 |
| unsigned char bus_ck804b_0;//a |
| unsigned char bus_ck804b_1;//b |
| unsigned char bus_ck804b_2;//c |
| unsigned char bus_ck804b_3;//d |
| unsigned char bus_ck804b_4;//e |
| unsigned char bus_ck804b_5;//f |
| unsigned apicid_ck804; |
| unsigned apicid_8131_1; |
| unsigned apicid_8131_2; |
| unsigned apicid_ck804b; |
| |
| unsigned sblk; |
| unsigned pci1234[] = |
| { //Here you only need to set value in pci1234 for HT-IO that could be installed or not |
| //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail |
| 0x0000ff0, |
| 0x0000ff0, |
| 0x0000ff0, |
| // 0x0000ff0, |
| // 0x0000ff0, |
| // 0x0000ff0, |
| // 0x0000ff0, |
| // 0x0000ff0 |
| }; |
| unsigned hc_possible_num; |
| unsigned sbdn; |
| unsigned hcdn[] = |
| { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most |
| 0x20202020, |
| 0x20202020, |
| 0x20202020, |
| // 0x20202020, |
| // 0x20202020, |
| // 0x20202020, |
| // 0x20202020, |
| // 0x20202020, |
| }; |
| unsigned sbdn3; |
| unsigned sbdnb; |
| |
| |
| |
| static unsigned get_bus_conf_done = 0; |
| |
| void get_bus_conf(void) |
| { |
| |
| unsigned apicid_base; |
| |
| device_t dev; |
| |
| if(get_bus_conf_done==1) return; //do it only once |
| |
| get_bus_conf_done = 1; |
| |
| hc_possible_num = ARRAY_SIZE(pci1234); |
| |
| get_sblk_pci1234(); |
| |
| sbdn = (hcdn[0] & 0xff); // first byte of first chain |
| |
| sbdn3 = (hcdn[1] & 0xff); |
| |
| sbdnb = (hcdn[2] & 0xff); // first byte of second chain |
| |
| // bus_ck804_0 = node_link_to_bus(0, sblk); |
| bus_ck804_0 = (pci1234[0] >> 16) & 0xff; |
| |
| /* CK804 */ |
| dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); |
| if (dev) { |
| bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| #if 0 |
| bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804_2++; |
| #else |
| bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804_5++; |
| #endif |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); |
| |
| bus_ck804_1 = 2; |
| #if 0 |
| bus_ck804_2 = 3; |
| #else |
| bus_ck804_5 = 3; |
| #endif |
| |
| } |
| #if 0 |
| dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); |
| if (dev) { |
| bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804_3++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); |
| |
| bus_ck804_3 = bus_ck804_2+1; |
| } |
| |
| dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); |
| if (dev) { |
| bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804_4++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); |
| |
| bus_ck804_4 = bus_ck804_3+1; |
| } |
| |
| |
| dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); |
| if (dev) { |
| bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804_5++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); |
| |
| bus_ck804_5 = bus_ck804_4+1; |
| } |
| #endif |
| |
| dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); |
| if (dev) { |
| bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); |
| } |
| |
| bus_8131_0 = (pci1234[1] >> 16) & 0xff; |
| /* 8131-1 */ |
| dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); |
| if (dev) { |
| bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_8131_2++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); |
| |
| bus_8131_1 = bus_8131_0+1; |
| bus_8131_2 = bus_8131_0+2; |
| } |
| /* 8131-2 */ |
| dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); |
| if (dev) { |
| bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); |
| |
| bus_8131_2 = bus_8131_1+1; |
| } |
| |
| /* CK804b */ |
| |
| if(pci1234[2] & 0xf) { //if the second cpu is installed |
| bus_ck804b_0 = (pci1234[2]>>16) & 0xff; |
| #if 0 |
| dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); |
| if (dev) { |
| bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804b_2++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); |
| |
| bus_ck804b_1 = bus_ck804b_0+1; |
| bus_ck804b_2 = bus_ck804b_0+2; |
| } |
| |
| dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0)); |
| if (dev) { |
| bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804b_3++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); |
| |
| bus_ck804b_2 = bus_ck804b_0+1; |
| bus_ck804b_3 = bus_ck804b_0+2; |
| } |
| |
| dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0)); |
| if (dev) { |
| bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804b_4++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); |
| |
| bus_ck804b_4 = bus_ck804b_3+1; |
| } |
| dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0)); |
| if (dev) { |
| bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); |
| bus_ck804b_5++; |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); |
| |
| bus_ck804b_5 = bus_ck804b_4+1; |
| } |
| #endif |
| |
| dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); |
| if (dev) { |
| bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); |
| #if 1 |
| bus_ck804b_5 = bus_ck804b_4+1; |
| #endif |
| |
| } |
| } |
| |
| |
| /*I/O APICs: APIC ID Version State Address*/ |
| #if CONFIG_LOGICAL_CPUS |
| apicid_base = get_apicid_base(4); |
| #else |
| apicid_base = CONFIG_MAX_PHYSICAL_CPUS; |
| #endif |
| apicid_ck804 = apicid_base+0; |
| apicid_8131_1 = apicid_base+1; |
| apicid_8131_2 = apicid_base+2; |
| apicid_ck804b = apicid_base+3; |
| |
| } |
