blob: 40787b5cec812ee2d066278a12d7700769826755 [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <cpu/x86/stack.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/post_code.h>
#include <cbmem.h>
#ifndef CONFIG_FSP_LOC
# error "CONFIG_FSP_LOC must be set."
#endif
#ifndef CONFIG_POST_IO
# error "CONFIG_POST_IO must be set."
#endif
#if CONFIG_POST_IO
# ifndef CONFIG_POST_IO_PORT
# error "CONFIG_POST_IO_PORT must be set."
# endif
#endif
#ifndef CONFIG_CPU_MICROCODE_CBFS_LOC
# error "CONFIG_CPU_MICROCODE_CBFS_LOC must be set."
#endif
#define LHLT_DELAY 0x50000 /* I/O delay between post codes on failure */
cmp $0, %eax
jne bisthalt
cache_as_ram:
post_code(0x20)
/*
* Find the FSP binary in cbfs.
* Make a fake stack that has the return value back to this code.
*/
lea fake_fsp_stack, %esp
jmp find_fsp
find_fsp_ret:
/* Save the FSP location */
mov %eax, %ebp
cmp $CONFIG_FSP_LOC, %eax
jb halt1
post_code(0x22)
/* Calculate entry into FSP */
mov 0x30(%ebp), %eax /* Load TempRamInitEntry */
add 0x1c(%ebp), %eax /* add in the offset for the FSP base address */
/*
* Pass early init variables on a fake stack (no memory yet)
* as well as the return location
*/
lea CAR_init_stack, %esp
/* call FSP binary to setup temporary stack */
jmp *%eax
CAR_init_done:
addl $4, %esp
cmp $0, %eax
jne halt2
/* Save FSP_INFO_HEADER location in ebx */
mov %ebp, %ebx
/*
* set up bootloader stack
* ecx: stack base
* edx: stack top
*/
lea -4(%edx), %esp
movl %esp, %ebp
pushl %ebx
before_romstage:
post_code(0x23)
/* Call romstage.c main function. */
call main /* does not return */
movb $0xB8, %ah
jmp .Lhlt
bisthalt:
movb $0xB9, %ah
jmp .Lhlt
halt1:
/*
* Failures for postcode 0xBA - failed in find_fsp()
*
* Values are:
* 0x01 - FV signature, "_FVH" not present
* 0x02 - FFS GUID not present
* 0x03 - FSP INFO Header not found
* 0x04 - ImageBase does not equal CONFIG_FSP_LOC - Is the FSP rebased to
* a different location, or does it need to be?
* 0x05 - FSP INFO Header signature "FSPH" not found
* 0x06 - FSP Image ID is not the expected ID.
*/
movb $0xBA, %ah
jmp .Lhlt
halt2:
/*
* Failures for postcode 0xBB - failed in the FSP:
*
* 0x00 - FSP_SUCCESS: Temp RAM was initialized successfully.
* 0x02 - FSP_INVALID_PARAMETER: Input parameters are invalid.
* 0x0E - FSP_NOT_FOUND: No valid microcode was found in the microcode region.
* 0x03 - FSP_UNSUPPORTED: The FSP calling conditions were not met.
* 0x07 - FSP_DEVICE_ERROR: Temp RAM initialization failed
* 0x14 - FSP_ALREADY_STARTED: Temp RAM initialization has been invoked
*/
movb $0xBB, %ah
.Lhlt:
xchg %al, %ah
#if CONFIG_POST_IO
outb %al, $CONFIG_POST_IO_PORT
#else
post_code(POST_DEAD_CODE)
#endif
movl $LHLT_DELAY, %ecx
.Lhlt_Delay:
outb %al, $0xED
loop .Lhlt_Delay
jmp .Lhlt
/*
* esp is set to this location so that the call into and return from the FSP
* in find_fsp will work.
*/
.align 4
fake_fsp_stack:
.long find_fsp_ret
CAR_init_params:
.long CONFIG_CPU_MICROCODE_CBFS_LOC
.long CONFIG_CPU_MICROCODE_CBFS_LEN
.long 0xFFFFFFFF - CACHE_ROM_SIZE + 1 /* Firmware Location */
.long CACHE_ROM_SIZE /* Total Firmware Length */
CAR_init_stack:
.long CAR_init_done
.long CAR_init_params