| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011-2012 The ChromiumOS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <string.h> |
| #include <bootmode.h> |
| #include <arch/io.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| |
| #include <southbridge/intel/bd82x6x/pch.h> |
| #include <southbridge/intel/common/gpio.h> |
| #include <ec/compal/ene932/ec.h> |
| #include <vendorcode/google/chromeos/chromeos.h> |
| #include "ec.h" |
| |
| |
| #ifndef __PRE_RAM__ |
| #include <boot/coreboot_tables.h> |
| |
| #define GPIO_COUNT 6 |
| |
| void fill_lb_gpios(struct lb_gpios *gpios) |
| { |
| struct device *dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); |
| u16 gpio_base = pci_read_config32(dev, GPIOBASE) & 0xfffe; |
| u16 gen_pmcon_1 = pci_read_config32(dev, GEN_PMCON_1); |
| |
| if (!gpio_base) |
| return; |
| |
| gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio)); |
| gpios->count = GPIO_COUNT; |
| |
| /* Write Protect: GPIO70 active high */ |
| gpios->gpios[0].port = 70; |
| gpios->gpios[0].polarity = ACTIVE_LOW; |
| gpios->gpios[0].value = !get_write_protect_state(); |
| strncpy((char *)gpios->gpios[0].name,"write protect", GPIO_MAX_NAME_LENGTH); |
| |
| /* Recovery: Virtual GPIO in the EC (Servo GPIO68 active low) */ |
| gpios->gpios[1].port = -1; |
| gpios->gpios[1].polarity = ACTIVE_HIGH; |
| gpios->gpios[1].value = get_recovery_mode_switch(); |
| strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH); |
| |
| /* Lid switch GPIO active high (open). */ |
| gpios->gpios[3].port = 15; |
| gpios->gpios[3].polarity = ACTIVE_HIGH; |
| gpios->gpios[3].value = get_lid_switch(); |
| strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH); |
| |
| /* Power Button */ |
| gpios->gpios[4].port = 101; |
| gpios->gpios[4].polarity = ACTIVE_LOW; |
| gpios->gpios[4].value = (gen_pmcon_1 >> 9) & 1; |
| strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH); |
| |
| /* Did we load the VGA Option ROM? */ |
| gpios->gpios[5].port = -1; /* Indicate that this is a pseudo GPIO */ |
| gpios->gpios[5].polarity = ACTIVE_HIGH; |
| gpios->gpios[5].value = gfx_get_init_done(); |
| strncpy((char *)gpios->gpios[5].name,"oprom", GPIO_MAX_NAME_LENGTH); |
| |
| } |
| #endif |
| |
| int get_lid_switch(void) |
| { |
| return get_gpio(15); |
| } |
| |
| int get_write_protect_state(void) |
| { |
| return !get_gpio(70); |
| } |
| |
| int get_recovery_mode_switch(void) |
| { |
| u8 gpio = !get_gpio(68); |
| /* GPIO68, active low. For Servo support |
| * Treat as active high and let the caller invert if needed. */ |
| printk(BIOS_DEBUG, "REC MODE GPIO 68: %x\n", gpio); |
| |
| return gpio; |
| } |
| |
| int parrot_ec_running_ro(void) |
| { |
| return !get_gpio(68); |
| } |
| |
| static const struct cros_gpio cros_gpios[] = { |
| CROS_GPIO_REC_AH(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), |
| CROS_GPIO_DEV_AH(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME), |
| CROS_GPIO_WP_AL(70, CROS_GPIO_DEVICE_NAME), |
| }; |
| |
| void mainboard_chromeos_acpi_generate(void) |
| { |
| chromeos_acpi_gpio_generate(cros_gpios, ARRAY_SIZE(cros_gpios)); |
| } |