| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* |
| * EC communication interface for QUANTA IT8518 Embedded Controller. |
| */ |
| |
| #ifndef _EC_QUANTA_IT8518_EC_H |
| #define _EC_QUANTA_IT8518_EC_H |
| |
| #define EC_IO 0x100 /* Mainboard specific. Could be Kconfig option */ |
| #define EC_IO_HIGH EC_IO + 1 |
| #define EC_IO_LOW EC_IO + 2 |
| #define EC_IO_DATA EC_IO + 3 |
| |
| /* Wait 400ms for keyboard controller answers */ |
| #define KBC_TIMEOUT_IN_MS 400 |
| |
| // 60h/64h Command Interface |
| #define KBD_DATA 0x60 |
| #define KBD_COMMAND 0x64 |
| #define KBD_STATUS 0x64 |
| #define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec) |
| #define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host) |
| |
| #define EC_KBD_CMD_UNMUTE 0xE8 |
| #define EC_KBD_CMD_MUTE 0xE9 |
| |
| u8 ec_kbc_read_ob(void); |
| void ec_kbc_write_cmd(u8 cmd); |
| void ec_kbc_write_ib(u8 data); |
| |
| // 62h/66h Command Interface |
| #define EC_DATA 0x62 |
| #define EC_SC 0x66 // Status & Control Register |
| #define SMI_EVT (1 << 6) // 1: SMI event was triggered |
| #define SCI_EVT (1 << 5) // 1: SCI event was triggered |
| |
| // EC Commands (defined in ec_function_spec v3.12) |
| #define RD_EC 0x80 |
| #define WR_EC 0x81 |
| #define QR_EC 0x84 |
| |
| #define EC_CMD_EXIT_BOOT_BLOCK 0x85 |
| #define EC_CMD_NOTIFY_ACPI_ENTER 0x86 |
| #define EC_CMD_NOTIFY_ACPI_EXIT 0x87 |
| #define EC_CMD_WARM_RESET 0x8C |
| |
| #define EC_FW_VER 0xE8 // 2 Bytes |
| #define EC_IF_MIN_VER 0xEB |
| #define EC_STATUS_REG 0xEC |
| #define EC_IF_MAJ_VER 0xEF |
| |
| // EC 0.83b added status bits: |
| // BIT0=EC in RO mode |
| // BIT1=Recovery Key Sequence Detected |
| #define EC_IN_RO_MODE 0x1 |
| #define EC_IN_RECOVERY_MODE 0x3 |
| |
| u8 ec_read_ob(void); |
| void ec_write_cmd(u8 cmd); |
| void ec_write_ib(u8 data); |
| |
| u8 ec_read(u16 addr); |
| void ec_write(u16 addr, u8 data); |
| u8 ec_it8518_get_event(void); |
| |
| #endif /* _EC_QUANTA_IT8518_EC_H */ |