| # Copyright (c) 2012 The Chromium Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import os |
| import unittest |
| |
| import ap_configurator_factory |
| import download_chromium_prebuilt |
| |
| |
| class ConfiguratorTest(unittest.TestCase): |
| """This test needs to be run against the UI interface. |
| |
| The purpose of this test is to act as a basic acceptance test when |
| developing a new AP configurator class. Use this to make sure all core |
| functionality is implemented. |
| |
| This test does not verify that everything works. |
| |
| This class provides a fast way to test without having to run_remote_test |
| because chances are you don't need a ChromeOS device. You will need to run |
| this like: |
| $ PYTHONPATH=../../deps/pyauto_dep/test_src/third_party/webdriver/pylib/ |
| python ap_configurator_test.py |
| """ |
| |
| def setUp(self): |
| if download_chromium_prebuilt.download_chromium_prebuilt_binaries(): |
| self.fail('The binaries were just downloaded. Please run: ' |
| '(outside-chroot) <path to chroot tmp directory>/' |
| '%s./chromedriver', |
| download_chromium_prebuilt.DOWNLOAD_PATH) |
| config_path = os.path.join(os.path.dirname(__file__), |
| '..', '..', 'config', 'wifi_compat_config') |
| factory = ap_configurator_factory.APConfiguratorFactory(config_path) |
| # Set self.ap to the one you want to test against. |
| self.ap = factory.get_ap_configurator_by_short_name('RT-N56U') |
| |
| def disabled_security_on_all_bands(self): |
| for band in self.ap.get_supported_bands(): |
| self.ap.set_band(band['band']) |
| self.ap.set_security_disabled() |
| self.ap.apply_settings() |
| |
| def return_non_n_mode_pair(self): |
| return_dict = {} |
| for mode in self.ap.get_supported_modes(): |
| return_dict['band'] = mode['band'] |
| for mode_type in mode['modes']: |
| if mode_type != self.ap.mode_n: |
| return_dict['mode'] = mode_type |
| return return_dict |
| |
| def test_make_no_changes(self): |
| """Test saving with no changes doesn't throw an error.""" |
| # Set to a known state. |
| self.ap.set_radio(enabled=True) |
| self.ap.apply_settings() |
| # Set the same setting again. |
| self.ap.set_radio(enabled=True) |
| self.ap.apply_settings() |
| |
| def test_radio(self): |
| """Test we can adjust the radio setting.""" |
| self.ap.set_radio(enabled=True) |
| self.ap.apply_settings() |
| self.ap.set_radio(enabled=False) |
| self.ap.apply_settings() |
| |
| def test_channel(self): |
| """Test adjusting the channel.""" |
| self.ap.set_radio(enabled=True) |
| self.ap.set_channel(4) |
| self.ap.apply_settings() |
| |
| def test_visibility(self): |
| """Test adjusting the visibility.""" |
| self.ap.set_visibility(False) |
| self.ap.apply_settings() |
| self.ap.set_visibility(True) |
| self.ap.apply_settings() |
| |
| def test_ssid(self): |
| """Test setting the SSID.""" |
| self.ap.set_ssid('AP-automated-ssid') |
| self.ap.apply_settings() |
| |
| def test_band(self): |
| """Test switching the band.""" |
| self.ap.set_band(self.ap.band_2ghz) |
| self.ap.apply_settings() |
| self.ap.set_band(self.ap.band_5ghz) |
| self.ap.apply_settings() |
| |
| def test_switching_bands_and_change_settings(self): |
| # Test switching between bands and change settings for each band. |
| bands_info = self.ap.get_supported_bands() |
| self.assertTrue(bands_info, msg='Invalid band sent.') |
| bands_set = [] |
| for bands in bands_info: |
| bands_set.append(bands['band']) |
| for band in bands_set: |
| self.ap.set_band(band) |
| self.ap.set_ssid('pqrstu') |
| self.ap.set_visibility(True) |
| if self.ap.is_security_mode_supported(self.ap.security_wep): |
| self.ap.set_security_wep('test2', self.ap.wep_authentication_open) |
| self.ap.apply_settings() |
| |
| def test_invalid_security(self): |
| """Test an exception is thrown for an invalid configuration.""" |
| # Set security to a good state. |
| self.disabled_security_on_all_bands() |
| for mode in self.ap.get_supported_modes(): |
| if not self.ap.mode_n in mode['modes']: |
| return |
| if not self.ap.is_security_mode_supported(self.ap.security_wep): |
| return |
| self.ap.set_mode(self.ap.mode_n) |
| self.ap.set_security_wep('77777', self.ap.wep_authentication_open) |
| try: |
| self.ap.apply_settings() |
| except RuntimeError, e: |
| self.ap.driver.close() |
| message = str(e) |
| if message.find('no handler was specified') != -1: |
| self.fail('Subclass did not handle an alert.') |
| return |
| self.fail('An exception should have been thrown but was not.') |
| |
| def test_security_wep(self): |
| """Test configuring WEP security.""" |
| if not self.ap.is_security_mode_supported(self.ap.security_wep): |
| return |
| for mode in self.ap.get_supported_modes(): |
| self.ap.set_band(mode['band']) |
| for mode_type in mode['modes']: |
| if mode_type != self.ap.mode_n: |
| self.ap.set_mode(mode_type) |
| self.ap.set_security_wep('45678', |
| self.ap.wep_authentication_open) |
| self.ap.apply_settings() |
| self.ap.set_security_wep('90123', |
| self.ap.wep_authentication_shared) |
| self.ap.apply_settings() |
| |
| def test_priority_sets(self): |
| """Test that commands are run in the right priority.""" |
| self.ap.set_radio(enabled=False) |
| self.ap.set_visibility(True) |
| self.ap.set_ssid('priority_test') |
| self.ap.apply_settings() |
| |
| def test_security_and_general_settings(self): |
| """Test updating settings that are general and security related.""" |
| self.disabled_security_on_all_bands() |
| good_pair = self.return_non_n_mode_pair() |
| self.ap.set_radio(enabled=False) |
| self.ap.set_band(good_pair['band']) |
| self.ap.set_mode(good_pair['mode']) |
| self.ap.set_visibility(True) |
| if self.ap.is_security_mode_supported(self.ap.security_wep): |
| self.ap.set_security_wep('88888', self.ap.wep_authentication_open) |
| self.ap.set_ssid('sec&gen_test') |
| self.ap.apply_settings() |
| |
| def test_modes(self): |
| """Tests switching modes.""" |
| # Some security settings won't work with some modes |
| self.ap.set_security_disabled() |
| self.ap.apply_settings() |
| modes_info = self.ap.get_supported_modes() |
| self.assertTrue(modes_info, |
| msg='Returned an invalid mode list. Is this method' |
| ' implemented?') |
| for band_modes in modes_info: |
| for mode in band_modes['modes']: |
| self.ap.set_mode(mode) |
| self.ap.apply_settings() |
| |
| def test_modes_with_band(self): |
| """Tests switching modes that support adjusting the band.""" |
| # Different bands and security options conflict. Disable security for |
| # this test. |
| self.disabled_security_on_all_bands() |
| # Check if we support self.kModeN across multiple bands |
| modes_info = self.ap.get_supported_modes() |
| n_bands = [] |
| for band_modes in modes_info: |
| if self.ap.mode_n in band_modes['modes']: |
| n_bands.append(band_modes['band']) |
| if len(n_bands) > 1: |
| for n_band in n_bands: |
| self.ap.set_mode(self.ap.mode_n, band=n_band) |
| self.ap.apply_settings() |
| |
| def test_fast_cycle_security(self): |
| """Mini stress for changing security settings rapidly.""" |
| self.disabled_security_on_all_bands() |
| self.ap.set_radio(enabled=True) |
| if self.ap.is_security_mode_supported(self.ap.security_wep): |
| self.ap.set_security_wep('77777', self.ap.wep_authentication_open) |
| if self.ap.is_security_mode_supported(self.ap.security_disabled): |
| self.ap.set_security_disabled() |
| if self.ap.is_security_mode_supported(self.ap.security_wpapsk): |
| self.ap.set_security_wpapsk('qwertyuiolkjhgfsdfg') |
| self.ap.apply_settings() |
| |
| def test_cycle_security(self): |
| """Test switching between different security settings.""" |
| self.disabled_security_on_all_bands() |
| good_pair = self.return_non_n_mode_pair() |
| self.ap.set_radio(enabled=True) |
| self.ap.set_band(good_pair['band']) |
| self.ap.set_mode(good_pair['mode']) |
| if self.ap.is_security_mode_supported(self.ap.security_wep): |
| self.ap.set_security_wep('77777', self.ap.wep_authentication_open) |
| self.ap.apply_settings() |
| if self.ap.is_security_mode_supported(self.ap.security_disabled): |
| self.ap.set_security_disabled() |
| self.ap.apply_settings() |
| if self.ap.is_security_mode_supported(self.ap.security_wpapsk): |
| self.ap.set_security_wpapsk('qwertyuiolkjhgfsdfg') |
| self.ap.apply_settings() |
| |
| def test_actions_when_radio_disabled(self): |
| """Test making changes when the radio is disabled.""" |
| self.disabled_security_on_all_bands() |
| good_pair = self.return_non_n_mode_pair() |
| self.ap.set_radio(enabled=False) |
| self.ap.set_band(good_pair['band']) |
| self.ap.set_mode(good_pair['mode']) |
| self.ap.apply_settings() |
| if self.ap.is_security_mode_supported(self.ap.security_wep): |
| self.ap.set_security_wep('77777', self.ap.wep_authentication_open) |
| self.ap.set_radio(enabled=False) |
| self.ap.apply_settings() |
| |
| def test_power_cycle_router(self): |
| """Test powering the ap down and back up again.""" |
| self.ap.power_cycle_router_up() |
| |
| if __name__ == '__main__': |
| unittest.main() |
