blob: 108210fe852f1d04e22ceaa1aa07eb34ffcd48f4 [file] [log] [blame]
# Copyright 2017 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
from autotest_lib.server import utils
NAME = "enterprise_CFM_Test.demo"
TEST_CATEGORY = "Functional"
TEST_CLASS = "enterprise"
TEST_TYPE = "server"
DOC = """
This test runs various tests and verifications for CfM devices.
Tests and verifications can be selected in control file.
action_list defines the list of all available tests, which are keys for dict
action_list, value for the key defines how many times this test will be run
in each loop.
verification_list defineds the list of all available verifications,
which are keys for dict verification_list. True means this verification specified
by this key will be performed.
Testing flow can be set in control file.
Example to run it:
test_that --autotest_dir ~/trunk/src/third_party/autotest/files/ --board=guado enterprise_CFM_Testd.demo
1. Modify dict error_key_words to meet each test's need.
2. Modify meeting code which works for domain device is enrolled in.
args_dict = utils.args_to_dict(args)
error_key_words = {'usb': [
'unable to enumerate USB device',
'hub_port_status failed',
'Device not responding to setup address',
'device not accepting address'
'kernel': [
'stuck on bsd ring',
'stuck on render ring',
'GPU crash dump saved to',
'ERROR Transfer event TRB DMA ptr',
'crashes with segfault',
'segfault at',
'Out of memory: Kill process',
'Killed process'
'video': [
'uvcvideo: Failed to set UVC commit control',
'uvcvideo: UVC non compliance',
'No streaming interface found'
'audio': [
'hw_params: Input/output error: rate:',
'usb_set_interface failed',
'chrome': [
'segfault at',
'Watchdog resetting firmware',
'Failed to create scanout buffer',
'Failed to enable controller',
'Failed to export buffer to dma_buf',
'Failed to take control of the display',
'Failed to modeset controller',
'Failed to encode frame.'
'atrus': [
'write: Connection timed out',
'Error: report failed',
'write: Broken pipe',
'protocol error'
'usb_stability': [
'USB disconnect',
'New USB device found'
# !!! Please change meeting code working for CfM.
# !!! If meeting_code for different domain is used, meeting might be timeout.
# vol_change_mode: if set to 1, make one call to set voluem to target volume,
# else, make multiple calls to update volume until volume
# equals to target volume.
test_config = {
'gpio_list': ['218','219', '209'],
'gpiopause': 8,
'puts': "",
'is_meeting': 1,
'meeting_code': 'otg-dkps-ovj', # this works for
'repeat': 2,
'rebeot_timeout': 60,
'loop_timeout': 30,
'action_timeout': 20,
'min_timeout': 10,
'debug_timeout': 5,
'vol_change_step': 6,
'vol_change_mode': 1,
'reboot_after_min_meets': 1,
'gpio_after_min_meets': 1
#action_config['meeting_test'] should be 0, 1.
# 0: no meeting test to be done
# 1: In each loop first CfM joins meeting, after all tests are done,
# CfM leaves meeting.
#the value of 'mute_unmute_camera_test', 'mute_unmute_mic_test' and
#'speaker_volume_test" and etc is number of test for each key to be done in
#one meeting.
action_config = {
'meeting_test': 1,
'mute_unmute_camera_test': 1,
'mute_unmute_mic_test': 1,
'speaker_volume_test': 1,
'gpio_test': 0,
'reboot_test': 0,
'reset_usb_test': 0,
'flap_monitor_test': 0
verification_config = {
'check_usb_inf_init': True,
'check_v4l2_interface': True,
'check_audio_card': False,
'check_cras_speaker': True,
'check_cras_mic': True,
'check_cras_pspeaker': True,
'check_cras_pmic': True,
'check_cras_speaker_vol': True,
'check_cras_mic_mute': True,
'check_prefer_camera': False,
'check_camera_mute': False,
'check_audio_stream': True,
'check_video_stream': True,
'check_hotrod_speaker': False,
'check_hotrod_mic': False,
'check_hotrod_camera': False,
'check_hotrod_pspeaker': False,
'check_hotrod_pmic': False,
'check_hotrod_pcamera': False,
'check_hotrod_speaker_vol': False,
'check_hotrod_mic_state': False,
'check_hotrod_camera_state': False,
'check_usb_errorlog': False,
'check_kernel_errorlog': False,
'check_video_errorlog': False,
'check_audio_errorlog': False,
'check_chrome_errorlog': False,
'check_atrus_errorlog': False,
'check_usb_stability': False,
'check_process_crash': True,
'check_kernel_panic': False,
'check_chrome_restarted': True,
'check_cfm_rebooted': True
test_flow_control = {
'reboot_before_start': False,
'run_test_only': True,
'setup_cleanup': True,
'abort_on_failure': True,
'random_mode': True,
'recovery_on_fatal_failure': True,
'skip_cfm_check': True,
'report': True
def run_test(machine):
host = hosts.create_host(machine)
run_test_only = test_flow_control['run_test_only']
job.run_test('enterprise_CFM_Test', host=host,
test_config=test_config, action_config=action_config,
parallel_simple(run_test, machines)