client/tests/kvm/unattended/OpenSUSE-11.xml

<?xml version="1.0"?>
<!DOCTYPE profile>
<profile xmlns="http://www.suse.com/1.0/yast2ns" xmlns:config="http://www.suse.com/1.0/configns">
  <bootloader>
    <device_map config:type="list">
      <device_map_entry>
        <firmware>hd0</firmware>
        <linux>/dev/vda</linux>
      </device_map_entry>
    </device_map>
    <global>
      <activate>true</activate>
      <boot_boot>false</boot_boot>
      <boot_extended>false</boot_extended>
      <boot_mbr>false</boot_mbr>
      <boot_root>true</boot_root>
      <debug>false</debug>
      <generic_mbr>false</generic_mbr>
      <gfxmenu>/boot/message</gfxmenu>
      <hiddenmenu>false</hiddenmenu>
      <lines_cache_id>2</lines_cache_id>
      <timeout config:type="integer">8</timeout>
    </global>
    <initrd_modules config:type="list">
      <initrd_module>
        <module>processor</module>
      </initrd_module>
      <initrd_module>
        <module>thermal</module>
      </initrd_module>
      <initrd_module>
        <module>ata_piix</module>
      </initrd_module>
      <initrd_module>
        <module>virtio_pci</module>
      </initrd_module>
      <initrd_module>
        <module>fan</module>
      </initrd_module>
      <initrd_module>
        <module>jbd</module>
      </initrd_module>
      <initrd_module>
        <module>ext3</module>
      </initrd_module>
      <initrd_module>
        <module>virtio_blk</module>
      </initrd_module>
      <initrd_module>
        <module>edd</module>
      </initrd_module>
    </initrd_modules>
    <append>console=tty0 console=ttyS0,115200</append>
    <loader_type>grub</loader_type>
    <sections config:type="list"/>
  </bootloader>
  <firewall>
    <FW_DEV_DMZ></FW_DEV_DMZ>
    <FW_DEV_EXT></FW_DEV_EXT>
    <FW_DEV_INT></FW_DEV_INT>
    <enable_firewall config:type="boolean">false</enable_firewall>
    <start_firewall config:type="boolean">false</start_firewall>
  </firewall>
  <general>
    <ask-list config:type="list"/>
    <mode>
      <confirm config:type="boolean">false</confirm>
      <halt config:type="boolean">true</halt>
    </mode>
    <mouse>
      <id>none</id>
    </mouse>
    <signature-handling>
      <accept_file_without_checksum config:type="boolean">true</accept_file_without_checksum>
      <accept_non_trusted_gpg_key config:type="boolean">true</accept_non_trusted_gpg_key>
      <accept_unknown_gpg_key config:type="boolean">true</accept_unknown_gpg_key>
      <accept_unsigned_file config:type="boolean">true</accept_unsigned_file>
      <accept_verification_failed config:type="boolean">false</accept_verification_failed>
      <import_gpg_key config:type="boolean">true</import_gpg_key>
    </signature-handling>
  </general>
  <groups config:type="list">
    <group>
      <gid>33</gid>
      <group_password>x</group_password>
      <groupname>video</groupname>
      <userlist>linux</userlist>
    </group>
    <group>
      <gid>16</gid>
      <group_password>x</group_password>
      <groupname>dialout</groupname>
      <userlist>linux</userlist>
    </group>
  </groups>
  <keyboard>
    <keyboard_values>
      <numlock>bios</numlock>
      <tty>tty1 tty2 tty3 tty4 tty5 tty6</tty>
    </keyboard_values>
    <keymap>english-us</keymap>
  </keyboard>
  <networking>
    <dhcp_options>
      <dhclient_additional_options></dhclient_additional_options>
      <dhclient_client_id></dhclient_client_id>
      <dhclient_hostname_option>AUTO</dhclient_hostname_option>
    </dhcp_options>
    <dns>
      <dhcp_hostname config:type="boolean">true</dhcp_hostname>
      <dhcp_resolv config:type="boolean">true</dhcp_resolv>
    </dns>
    <interfaces config:type="list">
      <interface>
        <bootproto>dhcp</bootproto>
        <device>eth0</device>
        <startmode>auto</startmode>
        <usercontrol>no</usercontrol>
      </interface>
    </interfaces>
    <managed config:type="boolean">false</managed>
    <routing>
      <ip_forward config:type="boolean">false</ip_forward>
    </routing>
  </networking>
  <partitioning config:type="list">
    <drive>
      <device>/dev/vda</device>
      <partitions config:type="list"/>
      <type config:type="symbol">CT_DISK</type>
      <use>all</use>
    </drive>
  </partitioning>
  <report>
    <errors>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </errors>
    <messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </messages>
    <warnings>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </warnings>
    <yesno_messages>
      <log config:type="boolean">true</log>
      <show config:type="boolean">true</show>
      <timeout config:type="integer">0</timeout>
    </yesno_messages>
  </report>
  <scripts>
    <init-scripts config:type="list">
      <script>
        <debug config:type="boolean">true</debug>
        <filename>config</filename>
        <source><![CDATA[dhclient eth0
chkconfig sshd on
sed -i -e 's/\(PasswordAuthentication\s\)no/\1yes/g'  /etc/ssh/sshd_config
service sshd restart
]]></source>
      </script>
    </init-scripts>
    <pre-scripts config:type="list">
      <script>
        <debug config:type="boolean">true</debug>
        <feedback config:type="boolean">false</feedback>
        <filename>disksetup</filename>
        <interpreter>shell</interpreter>
        <source><![CDATA[ if fdisk -l | grep sda -c >0;then sed  -e 's/\(.*\/dev\/\)vda\(.*\)/\1sda\2/g' /tmp/profile/autoinst.xml>/tmp/profile/modified.xml; fi
]]></source>
      </script>
    </pre-scripts>
  </scripts>
  <software>
    <packages config:type="list">
      <package>autoyast2-installation</package>
      <package>dhcp-client</package>
      <package>dhcp-tools</package>
      <package>autoyast2-installation</package>
      <package>autoyast2-installation</package>
      <package>autoyast2-installation</package>
    </packages>
    <patterns config:type="list">
      <pattern>apparmor</pattern>
      <pattern>apparmor_opt</pattern>
      <pattern>base</pattern>
      <pattern>console</pattern>
      <pattern>devel_basis</pattern>
      <pattern>enhanced_base</pattern>
      <pattern>enhanced_base_opt</pattern>
      <pattern>sw_management</pattern>
      <pattern>yast2_basis</pattern>
      <pattern>yast2_install_wf</pattern>
    </patterns>
  </software>
  <user_defaults>
    <group>100</group>
    <groups>video,dialout</groups>
    <home>/home</home>
    <inactive>-1</inactive>
    <shell>/bin/bash</shell>
    <skel>/etc/skel</skel>
  </user_defaults>
  <users config:type="list">
    <user>
      <encrypted config:type="boolean">true</encrypted>
      <fullname>linux</fullname>
      <gid>100</gid>
      <home>/home/linux</home>
      <password_settings>
        <inact>-1</inact>
        <max>99999</max>
        <min>0</min>
        <warn>7</warn>
      </password_settings>
      <shell>/bin/bash</shell>
      <uid>1000</uid>
      <user_password>$2a$05$bgtKW4IJKSS04W4GdU4ckeZL9yVHZdTmZz6F.gAxw9xItSfmt.zci</user_password>
      <username>linux</username>
    </user>
    <user>
      <encrypted config:type="boolean">true</encrypted>
      <fullname>root</fullname>
      <gid>0</gid>
      <home>/root</home>
      <password_settings>
        <inact>-1</inact>
        <max>99999</max>
        <min>0</min>
        <warn>7</warn>
      </password_settings>
      <shell>/bin/bash</shell>
      <uid>0</uid>
      <user_password>$2a$05$yit2ieOcDslJrkEqLo8D3ej1ZNWNX79iAaT885W.aDTZ581ZwBD8S</user_password>
      <username>root</username>
    </user>
  </users>
</profile>