Google Git
Sign in
cos / mirrors / cros / chromiumos / third_party / autotest / refs/heads/factory-reef-8811.B / . / server / hosts / cros_host.py
blob: 28f4fd2116a573903260f735689899423feb0025 [file] [log] [blame] [edit]
# Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
import logging
import os
import re
import time
import common
from autotest_lib.client.bin import utils
from autotest_lib.client.common_lib import autotemp
from autotest_lib.client.common_lib import error
from autotest_lib.client.common_lib import global_config
from autotest_lib.client.common_lib import hosts
from autotest_lib.client.common_lib import lsbrelease_utils
from autotest_lib.client.common_lib.cros import autoupdater
from autotest_lib.client.common_lib.cros import dev_server
from autotest_lib.client.common_lib.cros.graphite import autotest_es
from autotest_lib.client.common_lib.cros.graphite import autotest_stats
from autotest_lib.client.cros import constants as client_constants
from autotest_lib.client.cros import cros_ui
from autotest_lib.client.cros.audio import cras_utils
from autotest_lib.client.cros.input_playback import input_playback
from autotest_lib.client.cros.video import constants as video_test_constants
from autotest_lib.server import afe_utils
from autotest_lib.server import autoserv_parser
from autotest_lib.server import autotest
from autotest_lib.server import constants
from autotest_lib.server import utils as server_utils
from autotest_lib.server.cros import provision
from autotest_lib.server.cros.dynamic_suite import constants as ds_constants
from autotest_lib.server.cros.dynamic_suite import tools, frontend_wrappers
from autotest_lib.server.cros.faft.config.config import Config as FAFTConfig
from autotest_lib.server.cros.servo import plankton
from autotest_lib.server.hosts import abstract_ssh
from autotest_lib.server.hosts import base_label
from autotest_lib.server.hosts import cros_label
from autotest_lib.server.hosts import chameleon_host
from autotest_lib.server.hosts import cros_repair
from autotest_lib.server.hosts import plankton_host
from autotest_lib.server.hosts import servo_host
from autotest_lib.site_utils.rpm_control_system import rpm_client
# In case cros_host is being ran via SSP on an older Moblab version with an
# older chromite version.
try:
from chromite.lib import metrics
except:
metrics = None
CONFIG = global_config.global_config
ENABLE_DEVSERVER_TRIGGER_AUTO_UPDATE = CONFIG.get_config_value(
'CROS', 'enable_devserver_trigger_auto_update', type=bool,
default=False)
LUCID_SLEEP_BOARDS = ['samus', 'lulu']
class FactoryImageCheckerException(error.AutoservError):
"""Exception raised when an image is a factory image."""
pass
class CrosHost(abstract_ssh.AbstractSSHHost):
"""Chromium OS specific subclass of Host."""
VERSION_PREFIX = provision.CROS_VERSION_PREFIX
_parser = autoserv_parser.autoserv_parser
_AFE = frontend_wrappers.RetryingAFE(timeout_min=5, delay_sec=10)
support_devserver_provision = ENABLE_DEVSERVER_TRIGGER_AUTO_UPDATE
# Timeout values (in seconds) associated with various Chrome OS
# state changes.
#
# In general, a good rule of thumb is that the timeout can be up
# to twice the typical measured value on the slowest platform.
# The times here have not necessarily been empirically tested to
# meet this criterion.
#
# SLEEP_TIMEOUT: Time to allow for suspend to memory.
# RESUME_TIMEOUT: Time to allow for resume after suspend, plus
# time to restart the netwowrk.
# SHUTDOWN_TIMEOUT: Time to allow for shut down.
# BOOT_TIMEOUT: Time to allow for boot from power off. Among
# other things, this must account for the 30 second dev-mode
# screen delay, time to start the network on the DUT, and the
# ssh timeout of 120 seconds.
# USB_BOOT_TIMEOUT: Time to allow for boot from a USB device,
# including the 30 second dev-mode delay and time to start the
# network.
# INSTALL_TIMEOUT: Time to allow for chromeos-install.
# POWERWASH_BOOT_TIMEOUT: Time to allow for a reboot that
# includes powerwash.
SLEEP_TIMEOUT = 2
RESUME_TIMEOUT = 10
SHUTDOWN_TIMEOUT = 10
BOOT_TIMEOUT = 150
USB_BOOT_TIMEOUT = 300
INSTALL_TIMEOUT = 480
POWERWASH_BOOT_TIMEOUT = 60
# Minimum OS version that supports server side packaging. Older builds may
# not have server side package built or with Autotest code change to support
# server-side packaging.
MIN_VERSION_SUPPORT_SSP = CONFIG.get_config_value(
'AUTOSERV', 'min_version_support_ssp', type=int)
# REBOOT_TIMEOUT: How long to wait for a reboot.
#
# We have a long timeout to ensure we don't flakily fail due to other
# issues. Shorter timeouts are vetted in platform_RebootAfterUpdate.
# TODO(sbasi - crbug.com/276094) Restore to 5 mins once the 'host did not
# return from reboot' bug is solved.
REBOOT_TIMEOUT = 480
# _USB_POWER_TIMEOUT: Time to allow for USB to power toggle ON and OFF.
# _POWER_CYCLE_TIMEOUT: Time to allow for manual power cycle.
_USB_POWER_TIMEOUT = 5
_POWER_CYCLE_TIMEOUT = 10
_RPM_RECOVERY_BOARDS = CONFIG.get_config_value('CROS',
'rpm_recovery_boards', type=str).split(',')
_LAB_MACHINE_FILE = '/mnt/stateful_partition/.labmachine'
_RPM_HOSTNAME_REGEX = ('chromeos(\d+)(-row(\d+))?-rack(\d+[a-z]*)'
'-host(\d+)')
_LIGHTSENSOR_FILES = [ "in_illuminance0_input",
"in_illuminance_input",
"in_illuminance0_raw",
"in_illuminance_raw",
"illuminance0_input"]
_LIGHTSENSOR_SEARCH_DIR = '/sys/bus/iio/devices'
# Constants used in ping_wait_up() and ping_wait_down().
#
# _PING_WAIT_COUNT is the approximate number of polling
# cycles to use when waiting for a host state change.
#
# _PING_STATUS_DOWN and _PING_STATUS_UP are names used
# for arguments to the internal _ping_wait_for_status()
# method.
_PING_WAIT_COUNT = 40
_PING_STATUS_DOWN = False
_PING_STATUS_UP = True
# Allowed values for the power_method argument.
# POWER_CONTROL_RPM: Passed as default arg for power_off/on/cycle() methods.
# POWER_CONTROL_SERVO: Used in set_power() and power_cycle() methods.
# POWER_CONTROL_MANUAL: Used in set_power() and power_cycle() methods.
POWER_CONTROL_RPM = 'RPM'
POWER_CONTROL_SERVO = 'servoj10'
POWER_CONTROL_MANUAL = 'manual'
POWER_CONTROL_VALID_ARGS = (POWER_CONTROL_RPM,
POWER_CONTROL_SERVO,
POWER_CONTROL_MANUAL)
_RPM_OUTLET_CHANGED = 'outlet_changed'
# URL pattern to download firmware image.
_FW_IMAGE_URL_PATTERN = CONFIG.get_config_value(
'CROS', 'firmware_url_pattern', type=str)
# A flag file to indicate provision failures. The file is created
# at the start of any AU procedure (see `machine_install()`). The
# file's location in stateful means that on successul update it will
# be removed. Thus, if this file exists, it indicates that we've
# tried and failed in a previous attempt to update.
PROVISION_FAILED = '/var/tmp/provision_failed'
@staticmethod
def check_host(host, timeout=10):
"""
Check if the given host is a chrome-os host.
@param host: An ssh host representing a device.
@param timeout: The timeout for the run command.
@return: True if the host device is chromeos.
"""
try:
result = host.run(
'grep -q CHROMEOS /etc/lsb-release && '
'! test -f /mnt/stateful_partition/.android_tester && '
'! grep -q moblab /etc/lsb-release',
ignore_status=True, timeout=timeout)
except (error.AutoservRunError, error.AutoservSSHTimeout):
return False
return result.exit_status == 0
@staticmethod
def get_chameleon_arguments(args_dict):
"""Extract chameleon options from `args_dict` and return the result.
Recommended usage:
~~~~~~~~
args_dict = utils.args_to_dict(args)
chameleon_args = hosts.CrosHost.get_chameleon_arguments(args_dict)
host = hosts.create_host(machine, chameleon_args=chameleon_args)
~~~~~~~~
@param args_dict Dictionary from which to extract the chameleon
arguments.
"""
return {key: args_dict[key]
for key in ('chameleon_host', 'chameleon_port')
if key in args_dict}
@staticmethod
def get_plankton_arguments(args_dict):
"""Extract chameleon options from `args_dict` and return the result.
Recommended usage:
~~~~~~~~
args_dict = utils.args_to_dict(args)
plankton_args = hosts.CrosHost.get_plankton_arguments(args_dict)
host = hosts.create_host(machine, plankton_args=plankton_args)
~~~~~~~~
@param args_dict Dictionary from which to extract the plankton
arguments.
"""
return {key: args_dict[key]
for key in ('plankton_host', 'plankton_port')
if key in args_dict}
@staticmethod
def get_servo_arguments(args_dict):
"""Extract servo options from `args_dict` and return the result.
Recommended usage:
~~~~~~~~
args_dict = utils.args_to_dict(args)
servo_args = hosts.CrosHost.get_servo_arguments(args_dict)
host = hosts.create_host(machine, servo_args=servo_args)
~~~~~~~~
@param args_dict Dictionary from which to extract the servo
arguments.
"""
servo_attrs = (servo_host.SERVO_HOST_ATTR,
servo_host.SERVO_PORT_ATTR,
servo_host.SERVO_BOARD_ATTR)
return {key: args_dict[key]
for key in servo_attrs
if key in args_dict}
def _initialize(self, hostname, chameleon_args=None, servo_args=None,
plankton_args=None, try_lab_servo=False,
try_servo_repair=False,
ssh_verbosity_flag='', ssh_options='',
*args, **dargs):
"""Initialize superclasses, |self.chameleon|, and |self.servo|.
This method will attempt to create the test-assistant object
(chameleon/servo) when it is needed by the test. Check
the docstring of chameleon_host.create_chameleon_host and
servo_host.create_servo_host for how this is determined.
@param hostname: Hostname of the dut.
@param chameleon_args: A dictionary that contains args for creating
a ChameleonHost. See chameleon_host for details.
@param servo_args: A dictionary that contains args for creating
a ServoHost object. See servo_host for details.
@param try_lab_servo: When true, indicates that an attempt should
be made to create a ServoHost for a DUT in
the test lab, even if not required by
`servo_args`. See servo_host for details.
@param try_servo_repair: If a servo host is created, check it
with `repair()` rather than `verify()`.
See servo_host for details.
@param ssh_verbosity_flag: String, to pass to the ssh command to control
verbosity.
@param ssh_options: String, other ssh options to pass to the ssh
command.
"""
super(CrosHost, self)._initialize(hostname=hostname,
*args, **dargs)
self._repair_strategy = cros_repair.create_cros_repair_strategy()
self.labels = base_label.LabelRetriever(cros_label.CROS_LABELS)
# self.env is a dictionary of environment variable settings
# to be exported for commands run on the host.
# LIBC_FATAL_STDERR_ can be useful for diagnosing certain
# errors that might happen.
self.env['LIBC_FATAL_STDERR_'] = '1'
self._ssh_verbosity_flag = ssh_verbosity_flag
self._ssh_options = ssh_options
# TODO(fdeng): We need to simplify the
# process of servo and servo_host initialization.
# crbug.com/298432
self._servo_host = servo_host.create_servo_host(
dut=self, servo_args=servo_args,
try_lab_servo=try_lab_servo,
try_servo_repair=try_servo_repair)
if self._servo_host is not None:
self.servo = self._servo_host.get_servo()
else:
self.servo = None
# TODO(waihong): Do the simplication on Chameleon too.
self._chameleon_host = chameleon_host.create_chameleon_host(
dut=self.hostname, chameleon_args=chameleon_args)
# Add plankton host if plankton args were added on command line
self._plankton_host = plankton_host.create_plankton_host(plankton_args)
if self._chameleon_host:
self.chameleon = self._chameleon_host.create_chameleon_board()
else:
self.chameleon = None
if self._plankton_host:
self.plankton_servo = self._plankton_host.get_servo()
logging.info('plankton_servo: %r', self.plankton_servo)
# Create the plankton object used to access the ec uart
self.plankton = plankton.Plankton(self.plankton_servo,
self._plankton_host.get_servod_server_proxy())
else:
self.plankton = None
def get_repair_image_name(self, image_type='cros'):
"""Generate a image_name from variables in the global config.
image_type is used to differentiate different images. Default is CrOS,
in which case, repair image's name follows the naming convention defined
in global setting CROS/stable_build_pattern.
If the image_type is not `cros`, the repair image will be looked up
using key `board_name/image_type`, e.g., daisy_spring/firmware.
@param image_type: Type of the image. Default is `cros`.
@returns a str of $board-version/$BUILD. Returns None if stable version
for the board and the default are both not set, e.g., stable
firmware version for a new board.
"""
board = self._get_board_from_afe()
if board is None:
raise error.AutoservError('DUT has no board attribute, '
'cannot be repaired.')
if image_type != 'cros':
board = '%s/%s' % (board, image_type)
stable_version = afe_utils.get_stable_version(board=board)
if image_type == 'cros':
build_pattern = CONFIG.get_config_value(
'CROS', 'stable_build_pattern')
stable_version = build_pattern % (board, stable_version)
elif image_type == 'firmware':
# If firmware stable version is not specified, `stable_version`
# from the RPC is the default stable version for CrOS image.
# firmware stable version must be from firmware branch, thus its
# value must be like board-firmware/R31-1234.0.0. Check if
# firmware exists in the stable version, if not, return None.
if 'firmware' not in stable_version:
return None
return stable_version
def lookup_job_repo_url(self):
"""Looks up the job_repo_url for the host.
This is kept for backwards compatibility as AU test code in older
branch does not use server-side packaging and calls this method through
the host object.
TODO(dshi): Once R50 falls off the stable branch, we should remove this
method.
@returns job_repo_url from AFE or None if not found.
@raises KeyError if the host does not have a job_repo_url
"""
return afe_utils.get_host_attribute(self, ds_constants.JOB_REPO_URL)
def verify_job_repo_url(self, tag=''):
"""
Make sure job_repo_url of this host is valid.
Eg: The job_repo_url "http://lmn.cd.ab.xyx:8080/static/\
lumpy-release/R29-4279.0.0/autotest/packages" claims to have the
autotest package for lumpy-release/R29-4279.0.0. If this isn't the case,
download and extract it. If the devserver embedded in the url is
unresponsive, update the job_repo_url of the host after staging it on
another devserver.
@param job_repo_url: A url pointing to the devserver where the autotest
package for this build should be staged.
@param tag: The tag from the server job, in the format
<job_id>-<user>/<hostname>, or <hostless> for a server job.
@raises DevServerException: If we could not resolve a devserver.
@raises AutoservError: If we're unable to save the new job_repo_url as
a result of choosing a new devserver because the old one failed to
respond to a health check.
@raises urllib2.URLError: If the devserver embedded in job_repo_url
doesn't respond within the timeout.
"""
job_repo_url = afe_utils.get_host_attribute(self,
ds_constants.JOB_REPO_URL)
if not job_repo_url:
logging.warning('No job repo url set on host %s', self.hostname)
return
logging.info('Verifying job repo url %s', job_repo_url)
devserver_url, image_name = tools.get_devserver_build_from_package_url(
job_repo_url)
ds = dev_server.ImageServer(devserver_url)
logging.info('Staging autotest artifacts for %s on devserver %s',
image_name, ds.url())
start_time = time.time()
ds.stage_artifacts(image_name, ['autotest_packages'])
stage_time = time.time() - start_time
# Record how much of the verification time comes from a devserver
# restage. If we're doing things right we should not see multiple
# devservers for a given board/build/branch path.
try:
board, build_type, branch = server_utils.ParseBuildName(
image_name)[:3]
except server_utils.ParseBuildNameException:
pass
else:
devserver = devserver_url[
devserver_url.find('/') + 2:devserver_url.rfind(':')]
stats_key = {
'board': board,
'build_type': build_type,
'branch': branch,
'devserver': devserver.replace('.', '_'),
}
autotest_stats.Gauge('verify_job_repo_url').send(
'%(board)s.%(build_type)s.%(branch)s.%(devserver)s' % stats_key,
stage_time)
def stage_server_side_package(self, image=None):
"""Stage autotest server-side package on devserver.
@param image: Full path of an OS image to install or a build name.
@return: A url to the autotest server-side package.
@raise: error.AutoservError if fail to locate the build to test with, or
fail to stage server-side package.
"""
# If enable_drone_in_restricted_subnet is False, do not set hostname
# in devserver.resolve call, so a devserver in non-restricted subnet
# is picked to stage autotest server package for drone to download.
hostname = self.hostname
if not server_utils.ENABLE_DRONE_IN_RESTRICTED_SUBNET:
hostname = None
if image:
image_name = tools.get_build_from_image(image)
if not image_name:
raise error.AutoservError(
'Failed to parse build name from %s' % image)
ds = dev_server.ImageServer.resolve(image_name, hostname)
else:
job_repo_url = afe_utils.get_host_attribute(
self, ds_constants.JOB_REPO_URL)
if job_repo_url:
devserver_url, image_name = (
tools.get_devserver_build_from_package_url(job_repo_url))
# If enable_drone_in_restricted_subnet is True, use the
# existing devserver. Otherwise, resolve a new one in
# non-restricted subnet.
if server_utils.ENABLE_DRONE_IN_RESTRICTED_SUBNET:
ds = dev_server.ImageServer(devserver_url)
else:
ds = dev_server.ImageServer.resolve(image_name)
else:
labels = afe_utils.get_labels(self, self.VERSION_PREFIX)
if not labels:
raise error.AutoservError(
'Failed to stage server-side package. The host has '
'no job_report_url attribute or version label.')
image_name = labels[0][len(self.VERSION_PREFIX + ':'):]
ds = dev_server.ImageServer.resolve(image_name, hostname)
# Get the OS version of the build, for any build older than
# MIN_VERSION_SUPPORT_SSP, server side packaging is not supported.
match = re.match('.*/R\d+-(\d+)\.', image_name)
if match and int(match.group(1)) < self.MIN_VERSION_SUPPORT_SSP:
raise error.AutoservError(
'Build %s is older than %s. Server side packaging is '
'disabled.' % (image_name, self.MIN_VERSION_SUPPORT_SSP))
ds.stage_artifacts(image_name, ['autotest_server_package'])
return '%s/static/%s/%s' % (ds.url(), image_name,
'autotest_server_package.tar.bz2')
def _try_stateful_update(self, update_url, force_update, updater):
"""Try to use stateful update to initialize DUT.
When DUT is already running the same version that machine_install
tries to install, stateful update is a much faster way to clean up
the DUT for testing, compared to a full reimage. It is implemeted
by calling autoupdater.run_update, but skipping updating root, as
updating the kernel is time consuming and not necessary.
@param update_url: url of the image.
@param force_update: Set to True to update the image even if the DUT
is running the same version.
@param updater: ChromiumOSUpdater instance used to update the DUT.
@returns: True if the DUT was updated with stateful update.
"""
# Stop service ap-update-manager to prevent rebooting during autoupdate.
# The service is used in jetstream boards, but not other CrOS devices.
self.run('sudo stop ap-update-manager', ignore_status=True)
# TODO(jrbarnette): Yes, I hate this re.match() test case.
# It's better than the alternative: see crbug.com/360944.
image_name = autoupdater.url_to_image_name(update_url)
release_pattern = r'^.*-release/R[0-9]+-[0-9]+\.[0-9]+\.0$'
if not re.match(release_pattern, image_name):
return False
if not updater.check_version():
return False
if not force_update:
logging.info('Canceling stateful update because the new and '
'old versions are the same.')
return False
# Following folders should be rebuilt after stateful update.
# A test file is used to confirm each folder gets rebuilt after
# the stateful update.
folders_to_check = ['/var', '/home', '/mnt/stateful_partition']
test_file = '.test_file_to_be_deleted'
for folder in folders_to_check:
touch_path = os.path.join(folder, test_file)
self.run('touch %s' % touch_path)
updater.run_update(update_root=False)
# Reboot to complete stateful update.
self.reboot(timeout=self.REBOOT_TIMEOUT, wait=True)
check_file_cmd = 'test -f %s; echo $?'
for folder in folders_to_check:
test_file_path = os.path.join(folder, test_file)
result = self.run(check_file_cmd % test_file_path,
ignore_status=True)
if result.exit_status == 1:
return False
return True
def _post_update_processing(self, updater, expected_kernel=None):
"""After the DUT is updated, confirm machine_install succeeded.
@param updater: ChromiumOSUpdater instance used to update the DUT.
@param expected_kernel: kernel expected to be active after reboot,
or `None` to skip rollback checking.
"""
# Touch the lab machine file to leave a marker that
# distinguishes this image from other test images.
# Afterwards, we must re-run the autoreboot script because
# it depends on the _LAB_MACHINE_FILE.
autoreboot_cmd = ('FILE="%s" ; [ -f "$FILE" ] || '
'( touch "$FILE" ; start autoreboot )')
self.run(autoreboot_cmd % self._LAB_MACHINE_FILE)
updater.verify_boot_expectations(
expected_kernel, rollback_message=
'Build %s failed to boot on %s; system rolled back to previous '
'build' % (updater.update_version, self.hostname))
# Check that we've got the build we meant to install.
if not updater.check_version_to_confirm_install():
raise autoupdater.ChromiumOSError(
'Failed to update %s to build %s; found build '
'%s instead' % (self.hostname,
updater.update_version,
self.get_release_version()))
logging.debug('Cleaning up old autotest directories.')
try:
installed_autodir = autotest.Autotest.get_installed_autodir(self)
self.run('rm -rf ' + installed_autodir)
except autotest.AutodirNotFoundError:
logging.debug('No autotest installed directory found.')
def _stage_image_for_update(self, image_name=None):
"""Stage a build on a devserver and return the update_url and devserver.
@param image_name: a name like lumpy-release/R27-3837.0.0
@returns a tuple with an update URL like:
http://172.22.50.205:8082/update/lumpy-release/R27-3837.0.0
and the devserver instance.
"""
if not image_name:
image_name = self.get_repair_image_name()
logging.info('Staging build for AU: %s', image_name)
devserver = dev_server.ImageServer.resolve(image_name, self.hostname)
devserver.trigger_download(image_name, synchronous=False)
return (tools.image_url_pattern() % (devserver.url(), image_name),
devserver)
def stage_image_for_servo(self, image_name=None):
"""Stage a build on a devserver and return the update_url.
@param image_name: a name like lumpy-release/R27-3837.0.0
@returns an update URL like:
http://172.22.50.205:8082/update/lumpy-release/R27-3837.0.0
"""
if not image_name:
image_name = self.get_repair_image_name()
logging.info('Staging build for servo install: %s', image_name)
devserver = dev_server.ImageServer.resolve(image_name, self.hostname)
devserver.stage_artifacts(image_name, ['test_image'])
return devserver.get_test_image_url(image_name)
def stage_factory_image_for_servo(self, image_name):
"""Stage a build on a devserver and return the update_url.
@param image_name: a name like <baord>/4262.204.0
@return: An update URL, eg:
http://<devserver>/static/canary-channel/\
<board>/4262.204.0/factory_test/chromiumos_factory_image.bin
@raises: ValueError if the factory artifact name is missing from
the config.
"""
if not image_name:
logging.error('Need an image_name to stage a factory image.')
return
factory_artifact = CONFIG.get_config_value(
'CROS', 'factory_artifact', type=str, default='')
if not factory_artifact:
raise ValueError('Cannot retrieve the factory artifact name from '
'autotest config, and hence cannot stage factory '
'artifacts.')
logging.info('Staging build for servo install: %s', image_name)
devserver = dev_server.ImageServer.resolve(image_name, self.hostname)
devserver.stage_artifacts(
image_name,
[factory_artifact],
archive_url=None)
return tools.factory_image_url_pattern() % (devserver.url(), image_name)
def machine_install_by_devserver(self, update_url=None, force_update=False,
local_devserver=False, repair=False,
force_full_update=False):
"""Ultiize devserver to install the DUT.
(TODO) crbugs.com/627269: The logic in this function has some overlap
with those in function machine_install. The merge will be done later,
not in the same CL.
@param update_url: The update_url or build for the host to update.
@param force_update: Force an update even if the version installed
is the same. Default:False
@param local_devserver: Used by test_that to allow people to
use their local devserver. Default: False
@param repair: Forces update to repair image. Implies force_update.
@param force_full_update: If True, do not attempt to run stateful
update, force a full reimage. If False, try stateful update
first when the dut is already installed with the same version.
@raises autoupdater.ChromiumOSError
@returns A tuple of (image_name, host_attributes).
image_name is the name of image installed, e.g.,
veyron_jerry-release/R50-7871.0.0
host_attributes is a dictionary of (attribute, value), which
can be saved to afe_host_attributes table in database. This
method returns a dictionary with a single entry of
`job_repo_url`: repo_url, where repo_url is a devserver url to
autotest packages.
"""
devserver = None
logging.debug('Resolving a devserver for auto-update')
if repair:
update_url = self.get_repair_image_name()
force_update = True
if not update_url and not self._parser.options.image:
raise error.AutoservError(
'There is no update URL, nor a method to get one.')
if not update_url and self._parser.options.image:
update_url = self._parser.options.image
logging.info('Staging build for AU: %s', update_url)
# Get build from parameter or AFE.
# If the build is not a URL, let devserver to stage it first.
# Otherwise, choose a devserver to trigger auto-update.
build = None
if update_url.startswith('http://'):
build = autoupdater.url_to_image_name(update_url)
devserver = dev_server.ImageServer.resolve(build, self.hostname)
else:
build = update_url
devserver = dev_server.ImageServer.resolve(build, self.hostname)
devserver.trigger_download(build, synchronous=False)
# Report provision stats.
server_name = dev_server.ImageServer.get_server_name(devserver.url())
server_name = server_name.replace('.', '_')
autotest_stats.Counter('cros_host_provision.' + server_name).increment()
autotest_stats.Counter('cros_host_provision.total').increment()
logging.debug('Resolved devserver for auto-update: %s', devserver.url())
devserver.auto_update(self.hostname, build,
log_dir=self.job.sysinfo.sysinfodir,
force_update=force_update,
full_update=force_full_update)
# The reason to resolve a new devserver in function machine_install
# is mostly because that the update_url there may has a strange format,
# and it's hard to parse the devserver url from it.
# Since we already resolve a devserver to trigger auto-update, the same
# devserver is used to form JOB_REPO_URL here. Verified in local test.
repo_url = tools.get_package_url(devserver.url(), build)
return build, {ds_constants.JOB_REPO_URL: repo_url}
def machine_install(self, update_url=None, force_update=False,
local_devserver=False, repair=False,
force_full_update=False):
"""Install the DUT.
Use stateful update if the DUT is already running the same build.
Stateful update does not update kernel and tends to run much faster
than a full reimage. If the DUT is running a different build, or it
failed to do a stateful update, full update, including kernel update,
will be applied to the DUT.
Once a host enters machine_install its host attribute job_repo_url
(used for package install) will be removed and then updated.
@param update_url: The url to use for the update
pattern: http://$devserver:###/update/$build
If update_url is None and repair is True we will install the
stable image listed in afe_stable_versions table. If the table
is not setup, global_config value under CROS.stable_cros_version
will be used instead.
@param force_update: Force an update even if the version installed
is the same. Default:False
@param local_devserver: Used by test_that to allow people to
use their local devserver. Default: False
@param repair: Forces update to repair image. Implies force_update.
@param force_full_update: If True, do not attempt to run stateful
update, force a full reimage. If False, try stateful update
first when the dut is already installed with the same version.
@raises autoupdater.ChromiumOSError
@returns A tuple of (image_name, host_attributes).
image_name is the name of image installed, e.g.,
veyron_jerry-release/R50-7871.0.0
host_attributes is a dictionary of (attribute, value), which
can be saved to afe_host_attributes table in database. This
method returns a dictionary with a single entry of
`job_repo_url`: repo_url, where repo_url is a devserver url to
autotest packages.
"""
devserver = None
if repair:
update_url, devserver = self._stage_image_for_update()
force_update = True
if not update_url and not self._parser.options.image:
raise error.AutoservError(
'There is no update URL, nor a method to get one.')
if not update_url and self._parser.options.image:
# This is the base case where we have no given update URL i.e.
# dynamic suites logic etc. This is the most flexible case where we
# can serve an update from any of our fleet of devservers.
requested_build = self._parser.options.image
if not requested_build.startswith('http://'):
logging.debug('Update will be staged for this installation')
update_url, devserver = self._stage_image_for_update(
requested_build)
else:
update_url = requested_build
logging.debug('Update URL is %s', update_url)
# Report provision stats.
server_name = dev_server.ImageServer.get_server_name(update_url)
server_name = server_name.replace('.', '_')
autotest_stats.Counter('cros_host_provision.' + server_name).increment()
autotest_stats.Counter('cros_host_provision.total').increment()
# Create a file to indicate if provision fails. The file will be removed
# by stateful update or full install.
self.run('touch %s' % self.PROVISION_FAILED)
update_complete = False
updater = autoupdater.ChromiumOSUpdater(
update_url, host=self, local_devserver=local_devserver)
if not force_full_update:
try:
# If the DUT is already running the same build, try stateful
# update first as it's much quicker than a full re-image.
update_complete = self._try_stateful_update(
update_url, force_update, updater)
except Exception as e:
logging.exception(e)
inactive_kernel = None
if update_complete or (not force_update and updater.check_version()):
logging.info('Install complete without full update')
else:
logging.info('DUT requires full update.')
self.reboot(timeout=self.REBOOT_TIMEOUT, wait=True)
# Stop service ap-update-manager to prevent rebooting during
# autoupdate. The service is used in jetstream boards, but not other
# CrOS devices.
self.run('sudo stop ap-update-manager', ignore_status=True)
num_of_attempts = provision.FLAKY_DEVSERVER_ATTEMPTS
while num_of_attempts > 0:
num_of_attempts -= 1
try:
updater.run_update()
except Exception:
logging.warn('Autoupdate did not complete.')
# Do additional check for the devserver health. Ideally,
# the autoupdater.py could raise an exception when it
# detected network flake but that would require
# instrumenting the update engine and parsing it log.
if (num_of_attempts <= 0 or
devserver is None or
dev_server.ImageServer.devserver_healthy(
devserver.url())):
raise
logging.warn('Devserver looks unhealthy. Trying another')
update_url, devserver = self._stage_image_for_update(
requested_build)
logging.debug('New Update URL is %s', update_url)
updater = autoupdater.ChromiumOSUpdater(
update_url, host=self,
local_devserver=local_devserver)
else:
break
# Give it some time in case of IO issues.
time.sleep(10)
# Figure out active and inactive kernel.
active_kernel, inactive_kernel = updater.get_kernel_state()
# Ensure inactive kernel has higher priority than active.
if (updater.get_kernel_priority(inactive_kernel)
< updater.get_kernel_priority(active_kernel)):
raise autoupdater.ChromiumOSError(
'Update failed. The priority of the inactive kernel'
' partition is less than that of the active kernel'
' partition.')
# Updater has returned successfully; reboot the host.
#
# Regarding the 'crossystem' command: In some cases, the
# TPM gets into a state such that it fails verification.
# We don't know why. However, this call papers over the
# problem by clearing the TPM during the reboot.
#
# We ignore failures from 'crossystem'. Although failure
# here is unexpected, and could signal a bug, the point
# of the exercise is to paper over problems; allowing
# this to fail would defeat the purpose.
self.run('crossystem clear_tpm_owner_request=1',
ignore_status=True)
self.reboot(timeout=self.REBOOT_TIMEOUT, wait=True)
self._post_update_processing(updater, inactive_kernel)
image_name = autoupdater.url_to_image_name(update_url)
# update_url is different from devserver url needed to stage autotest
# packages, therefore, resolve a new devserver url here.
devserver_url = dev_server.ImageServer.resolve(image_name,
self.hostname).url()
repo_url = tools.get_package_url(devserver_url, image_name)
return image_name, {ds_constants.JOB_REPO_URL: repo_url}
def _clear_fw_version_labels(self, rw_only):
"""Clear firmware version labels from the machine.
@param rw_only: True to only clear fwrw_version; otherewise, clear
both fwro_version and fwrw_version.
"""
labels = self._AFE.get_labels(
name__startswith=provision.FW_RW_VERSION_PREFIX,
host__hostname=self.hostname)
if not rw_only:
labels = labels + self._AFE.get_labels(
name__startswith=provision.FW_RO_VERSION_PREFIX,
host__hostname=self.hostname)
for label in labels:
label.remove_hosts(hosts=[self.hostname])
def _add_fw_version_label(self, build, rw_only):
"""Add firmware version label to the machine.
@param build: Build of firmware.
@param rw_only: True to only add fwrw_version; otherwise, add both
fwro_version and fwrw_version.
"""
fw_label = provision.fwrw_version_to_label(build)
self._AFE.run('label_add_hosts', id=fw_label, hosts=[self.hostname])
if not rw_only:
fw_label = provision.fwro_version_to_label(build)
self._AFE.run('label_add_hosts', id=fw_label, hosts=[self.hostname])
def firmware_install(self, build=None, rw_only=False):
"""Install firmware to the DUT.
Use stateful update if the DUT is already running the same build.
Stateful update does not update kernel and tends to run much faster
than a full reimage. If the DUT is running a different build, or it
failed to do a stateful update, full update, including kernel update,
will be applied to the DUT.
Once a host enters firmware_install its fw[ro|rw]_version label will
be removed. After the firmware is updated successfully, a new
fw[ro|rw]_version label will be added to the host.
@param build: The build version to which we want to provision the
firmware of the machine,
e.g. 'link-firmware/R22-2695.1.144'.
@param rw_only: True to only install firmware to its RW portions. Keep
the RO portions unchanged.
TODO(dshi): After bug 381718 is fixed, update here with corresponding
exceptions that could be raised.
"""
if not self.servo:
raise error.TestError('Host %s does not have servo.' %
self.hostname)
# TODO(fdeng): use host.get_board() after
# crbug.com/271834 is fixed.
board = self._get_board_from_afe()
# If build is not set, try to install firmware from stable CrOS.
if not build:
build = self.get_repair_image_name(image_type='firmware')
if not build:
raise error.TestError(
'Failed to find stable firmware build for %s.',
self.hostname)
logging.info('Will install firmware from build %s.', build)
config = FAFTConfig(board)
if config.use_u_boot:
ap_image = 'image-%s.bin' % board
else: # Depthcharge platform
ap_image = 'image.bin'
ec_image = 'ec.bin'
ds = dev_server.ImageServer.resolve(build, self.hostname)
ds.stage_artifacts(build, ['firmware'])
tmpd = autotemp.tempdir(unique_id='fwimage')
try:
fwurl = self._FW_IMAGE_URL_PATTERN % (ds.url(), build)
local_tarball = os.path.join(tmpd.name, os.path.basename(fwurl))
server_utils.system('wget -O %s %s' % (local_tarball, fwurl),
timeout=60)
self._clear_fw_version_labels(rw_only)
if config.chrome_ec:
logging.info('Will re-program EC %snow', 'RW ' if rw_only else '')
server_utils.system('tar xf %s -C %s %s' %
(local_tarball, tmpd.name, ec_image),
timeout=60)
self.servo.program_ec(os.path.join(tmpd.name, ec_image), rw_only)
else:
logging.info('Not a Chrome EC, ignore re-programing it')
logging.info('Will re-program BIOS %snow', 'RW ' if rw_only else '')
server_utils.system('tar xf %s -C %s %s' %
(local_tarball, tmpd.name, ap_image),
timeout=60)
self.servo.program_bios(os.path.join(tmpd.name, ap_image), rw_only)
self.servo.get_power_state_controller().reset()
time.sleep(self.servo.BOOT_DELAY)
self._add_fw_version_label(build, rw_only)
finally:
tmpd.clean()
def show_update_engine_log(self):
"""Output update engine log."""
logging.debug('Dumping %s', client_constants.UPDATE_ENGINE_LOG)
self.run('cat %s' % client_constants.UPDATE_ENGINE_LOG)
def _get_board_from_afe(self):
"""Retrieve this host's board from its labels stored locally.
Looks for a host label of the form "board:<board>", and
returns the "<board>" part of the label. `None` is returned
if there is not a single, unique label matching the pattern.
@returns board from label, or `None`.
"""
return afe_utils.get_board(self)
def get_build(self):
"""Retrieve the current build for this Host from the AFE.
Looks through this host's labels in the AFE to determine its build.
This method is replaced by afe_utils.get_build. It's kept here to
maintain backwards compatibility for test control files in older CrOS
builds (R48, R49 etc.) still call host.get_build, e.g.,
`provision_AutoUpdate.double`.
TODO(sbasi): Once R50 falls into release branch, this method can be
removed.
@returns The current build or None if it could not find it or if there
were multiple build labels assigned to this host.
"""
return afe_utils.get_build(self)
def servo_install(self, image_url=None, usb_boot_timeout=USB_BOOT_TIMEOUT,
install_timeout=INSTALL_TIMEOUT):
"""
Re-install the OS on the DUT by:
1) installing a test image on a USB storage device attached to the Servo
board,
2) booting that image in recovery mode, and then
3) installing the image with chromeos-install.
@param image_url: If specified use as the url to install on the DUT.
otherwise boot the currently staged image on the USB stick.
@param usb_boot_timeout: The usb_boot_timeout to use during reimage.
Factory images need a longer usb_boot_timeout than regular
cros images.
@param install_timeout: The timeout to use when installing the chromeos
image. Factory images need a longer install_timeout.
@raises AutoservError if the image fails to boot.
"""
usb_boot_timer_key = ('servo_install.usb_boot_timeout_%s'
% usb_boot_timeout)
logging.info('Downloading image to USB, then booting from it. Usb boot '
'timeout = %s', usb_boot_timeout)
timer = autotest_stats.Timer(usb_boot_timer_key)
timer.start()
self.servo.install_recovery_image(image_url)
if not self.wait_up(timeout=usb_boot_timeout):
raise hosts.AutoservRepairError(
'DUT failed to boot from USB after %d seconds' %
usb_boot_timeout)
timer.stop()
# The new chromeos-tpm-recovery has been merged since R44-7073.0.0.
# In old CrOS images, this command fails. Skip the error.
logging.info('Resetting the TPM status')
try:
self.run('chromeos-tpm-recovery')
except error.AutoservRunError:
logging.warn('chromeos-tpm-recovery is too old.')
install_timer_key = ('servo_install.install_timeout_%s'
% install_timeout)
timer = autotest_stats.Timer(install_timer_key)
timer.start()
logging.info('Installing image through chromeos-install.')
self.run('chromeos-install --yes', timeout=install_timeout)
self.halt()
timer.stop()
logging.info('Power cycling DUT through servo.')
self.servo.get_power_state_controller().power_off()
self.servo.switch_usbkey('off')
# N.B. The Servo API requires that we use power_on() here
# for two reasons:
# 1) After turning on a DUT in recovery mode, you must turn
# it off and then on with power_on() once more to
# disable recovery mode (this is a Parrot specific
# requirement).
# 2) After power_off(), the only way to turn on is with
# power_on() (this is a Storm specific requirement).
self.servo.get_power_state_controller().power_on()
logging.info('Waiting for DUT to come back up.')
if not self.wait_up(timeout=self.BOOT_TIMEOUT):
raise error.AutoservError('DUT failed to reboot installed '
'test image after %d seconds' %
self.BOOT_TIMEOUT)
def _is_firmware_repair_supported(self):
"""Check if the firmware repair is supported.
The firmware repair is only applicable to DUTs in pools listed in
global config CROS/pools_support_firmware_repair.
@return: True if it is supported; otherwise False.
"""
logging.info('Checking if host %s can be repaired with firmware '
'repair.', self.hostname)
pools = server_utils.get_labels_from_afe(self.hostname, 'pool:',
self._AFE)
pools_support_firmware_repair = CONFIG.get_config_value('CROS',
'pools_support_firmware_repair', type=str).split(',')
return (pools and pools_support_firmware_repair and
set(pools).intersection(set(pools_support_firmware_repair)))
def repair_servo(self):
"""
Confirm that servo is initialized and verified.
If the servo object is missing, attempt to repair the servo
host. Repair failures are passed back to the caller.
@raise AutoservError: If there is no servo host for this CrOS
host.
"""
if self.servo:
return
if not self._servo_host:
raise error.AutoservError('No servo host for %s.' %
self.hostname)
self._servo_host.repair()
self.servo = self._servo_host.get_servo()
def repair(self):
"""Attempt to get the DUT to pass `self.verify()`.
This overrides the base class function for repair; it does
not call back to the parent class, but instead relies on
`self._repair_strategy` to coordinate the verification and
repair steps needed to get the DUT working.
"""
self._repair_strategy.repair(self)
def close(self):
super(CrosHost, self).close()
def get_power_supply_info(self):
"""Get the output of power_supply_info.
power_supply_info outputs the info of each power supply, e.g.,
Device: Line Power
online: no
type: Mains
voltage (V): 0
current (A): 0
Device: Battery
state: Discharging
percentage: 95.9276
technology: Li-ion
Above output shows two devices, Line Power and Battery, with details of
each device listed. This function parses the output into a dictionary,
with key being the device name, and value being a dictionary of details
of the device info.
@return: The dictionary of power_supply_info, e.g.,
{'Line Power': {'online': 'yes', 'type': 'main'},
'Battery': {'vendor': 'xyz', 'percentage': '100'}}
@raise error.AutoservRunError if power_supply_info tool is not found in
the DUT. Caller should handle this error to avoid false failure
on verification.
"""
result = self.run('power_supply_info').stdout.strip()
info = {}
device_name = None
device_info = {}
for line in result.split('\n'):
pair = [v.strip() for v in line.split(':')]
if len(pair) != 2:
continue
if pair[0] == 'Device':
if device_name:
info[device_name] = device_info
device_name = pair[1]
device_info = {}
else:
device_info[pair[0]] = pair[1]
if device_name and not device_name in info:
info[device_name] = device_info
return info
def get_battery_percentage(self):
"""Get the battery percentage.
@return: The percentage of battery level, value range from 0-100. Return
None if the battery info cannot be retrieved.
"""
try:
info = self.get_power_supply_info()
logging.info(info)
return float(info['Battery']['percentage'])
except (KeyError, ValueError, error.AutoservRunError):
return None
def is_ac_connected(self):
"""Check if the dut has power adapter connected and charging.
@return: True if power adapter is connected and charging.
"""
try:
info = self.get_power_supply_info()
return info['Line Power']['online'] == 'yes'
except (KeyError, error.AutoservRunError):
return None
def _cleanup_poweron(self):
"""Special cleanup method to make sure hosts always get power back."""
afe = frontend_wrappers.RetryingAFE(timeout_min=5, delay_sec=10)
hosts = afe.get_hosts(hostname=self.hostname)
if not hosts or not (self._RPM_OUTLET_CHANGED in
hosts[0].attributes):
return
logging.debug('This host has recently interacted with the RPM'
' Infrastructure. Ensuring power is on.')
try:
self.power_on()
afe.set_host_attribute(self._RPM_OUTLET_CHANGED, None,
hostname=self.hostname)
except rpm_client.RemotePowerException:
logging.error('Failed to turn Power On for this host after '
'cleanup through the RPM Infrastructure.')
autotest_es.post(
type_str='RPM_poweron_failure',
metadata={'hostname': self.hostname})
battery_percentage = self.get_battery_percentage()
if battery_percentage and battery_percentage < 50:
raise
elif self.is_ac_connected():
logging.info('The device has power adapter connected and '
'charging. No need to try to turn RPM on '
'again.')
afe.set_host_attribute(self._RPM_OUTLET_CHANGED, None,
hostname=self.hostname)
logging.info('Battery level is now at %s%%. The device may '
'still have enough power to run test, so no '
'exception will be raised.', battery_percentage)
def _is_factory_image(self):
"""Checks if the image on the DUT is a factory image.
@return: True if the image on the DUT is a factory image.
False otherwise.
"""
result = self.run('[ -f /root/.factory_test ]', ignore_status=True)
return result.exit_status == 0
def _restart_ui(self):
"""Restart the Chrome UI.
@raises: FactoryImageCheckerException for factory images, since
we cannot attempt to restart ui on them.
error.AutoservRunError for any other type of error that
occurs while restarting ui.
"""
if self._is_factory_image():
raise FactoryImageCheckerException('Cannot restart ui on factory '
'images')
# TODO(jrbarnette): The command to stop/start the ui job
# should live inside cros_ui, too. However that would seem
# to imply interface changes to the existing start()/restart()
# functions, which is a bridge too far (for now).
prompt = cros_ui.get_chrome_session_ident(self)
self.run('stop ui; start ui')
cros_ui.wait_for_chrome_ready(prompt, self)
def get_release_version(self):
"""Get the value of attribute CHROMEOS_RELEASE_VERSION from lsb-release.
@returns The version string in lsb-release, under attribute
CHROMEOS_RELEASE_VERSION.
"""
lsb_release_content = self.run(
'cat "%s"' % client_constants.LSB_RELEASE).stdout.strip()
return lsbrelease_utils.get_chromeos_release_version(
lsb_release_content=lsb_release_content)
def verify_cros_version_label(self):
""" Make sure host's cros-version label match the actual image in dut.
Remove any cros-version: label that doesn't match that installed in
the dut.
@param raise_error: Set to True to raise exception if any mismatch found
@raise error.AutoservError: If any mismatch between cros-version label
and the build installed in dut is found.
"""
labels = self._AFE.get_labels(
name__startswith=ds_constants.VERSION_PREFIX,
host__hostname=self.hostname)
mismatch_found = False
if labels:
# Get CHROMEOS_RELEASE_VERSION from lsb-release, e.g., 6908.0.0.
# Note that it's different from cros-version label, which has
# builder and branch info, e.g.,
# cros-version:peppy-release/R43-6908.0.0
release_version = self.get_release_version()
host_list = [self.hostname]
for label in labels:
# Remove any cros-version label that does not match
# release_version.
build_version = label.name[len(ds_constants.VERSION_PREFIX):]
if not utils.version_match(build_version, release_version):
logging.warn('cros-version label "%s" does not match '
'release version %s. Removing the label.',
label.name, release_version)
label.remove_hosts(hosts=host_list)
mismatch_found = True
if mismatch_found:
autotest_es.post(use_http=True,
type_str='cros_version_label_mismatch',
metadata={'hostname': self.hostname})
raise error.AutoservError('The host has wrong cros-version label.')
def verify_firmware_status(self):
"""Verify the host's firmware is in a good state.
@raise error.AutoservError: If state is not good.
"""
if self._is_firmware_repair_supported():
try:
# Read the AP firmware and dump the sections we are interested.
cmd = ('mkdir /tmp/verify_firmware; '
'cd /tmp/verify_firmware; '
'for section in VBLOCK_A VBLOCK_B FW_MAIN_A FW_MAIN_B; '
'do flashrom -r image.bin -i $section:$section; '
'done')
self.run(cmd)
# Verify the firmware blocks A and B.
cmd = ('vbutil_firmware --verify /tmp/verify_firmware/VBLOCK_%c'
' --signpubkey /usr/share/vboot/devkeys/root_key.vbpubk'
' --fv /tmp/verify_firmware/FW_MAIN_%c')
for c in ('A', 'B'):
rv = self.run(cmd % (c, c), ignore_status=True)
if rv.exit_status:
raise error.AutoservError(
'Firmware %c is in a bad state.' % c)
finally:
# Remove the tempoary files.
self.run('rm -rf /tmp/verify_firmware')
else:
logging.info('Do not care about firmware status when the host '
'is not in pools that support firmware repair.')
def cleanup(self):
self.run('rm -f %s' % client_constants.CLEANUP_LOGS_PAUSED_FILE)
try:
self._restart_ui()
except (error.AutotestRunError, error.AutoservRunError,
FactoryImageCheckerException):
logging.warning('Unable to restart ui, rebooting device.')
# Since restarting the UI fails fall back to normal Autotest
# cleanup routines, i.e. reboot the machine.
super(CrosHost, self).cleanup()
# Check if the rpm outlet was manipulated.
if self.has_power():
self._cleanup_poweron()
self.verify_cros_version_label()
def reboot(self, **dargs):
"""
This function reboots the site host. The more generic
RemoteHost.reboot() performs sync and sleeps for 5
seconds. This is not necessary for Chrome OS devices as the
sync should be finished in a short time during the reboot
command.
"""
if 'reboot_cmd' not in dargs:
reboot_timeout = dargs.get('reboot_timeout', 10)
dargs['reboot_cmd'] = ('sleep 1; '
'reboot & sleep %d; '
'reboot -f' % reboot_timeout)
# Enable fastsync to avoid running extra sync commands before reboot.
if 'fastsync' not in dargs:
dargs['fastsync'] = True
# For purposes of logging reboot times:
# Get the board name i.e. 'daisy_spring'
board_fullname = self.get_board()
# Strip the prefix and add it to dargs.
dargs['board'] = board_fullname[board_fullname.find(':')+1:]
metric_fields = {'board' : dargs['board'],
'success' : True,
'error' : ''}
t0 = time.time()
try:
super(CrosHost, self).reboot(**dargs)
except Exception as e:
metric_fields['success'] = False
metric_fields['error'] = type(e).__name__
raise
finally:
duration = int(time.time() - t0)
if metrics:
metrics.Counter(
'chromeos/autotest/autoserv/reboot_count').increment(
fields=metric_fields)
metrics.SecondsDistribution(
'chromeos/autotest/autoserv/reboot_duration').add(
duration, fields=metric_fields)
def suspend(self, **dargs):
"""
This function suspends the site host.
"""
suspend_time = dargs.get('suspend_time', 60)
dargs['timeout'] = suspend_time
if 'suspend_cmd' not in dargs:
dargs['suspend_cmd'] = ' && '.join([
'echo 0 > /sys/class/rtc/rtc0/wakealarm',
'echo +%d > /sys/class/rtc/rtc0/wakealarm' % suspend_time,
'powerd_dbus_suspend --delay=0'])
super(CrosHost, self).suspend(**dargs)
def upstart_status(self, service_name):
"""Check the status of an upstart init script.
@param service_name: Service to look up.
@returns True if the service is running, False otherwise.
"""
return self.run('status %s | grep start/running' %
service_name).stdout.strip() != ''
def verify_software(self):
"""Verify working software on a Chrome OS system.
Tests for the following conditions:
1. All conditions tested by the parent version of this
function.
2. Sufficient space in /mnt/stateful_partition.
3. Sufficient space in /mnt/stateful_partition/encrypted.
4. update_engine answers a simple status request over DBus.
"""
super(CrosHost, self).verify_software()
default_kilo_inodes_required = CONFIG.get_config_value(
'SERVER', 'kilo_inodes_required', type=int, default=100)
board = self.get_board().replace(ds_constants.BOARD_PREFIX, '')
kilo_inodes_required = CONFIG.get_config_value(
'SERVER', 'kilo_inodes_required_%s' % board,
type=int, default=default_kilo_inodes_required)
self.check_inodes('/mnt/stateful_partition', kilo_inodes_required)
self.check_diskspace(
'/mnt/stateful_partition',
CONFIG.get_config_value(
'SERVER', 'gb_diskspace_required', type=float,
default=20.0))
encrypted_stateful_path = '/mnt/stateful_partition/encrypted'
# Not all targets build with encrypted stateful support.
if self.path_exists(encrypted_stateful_path):
self.check_diskspace(
encrypted_stateful_path,
CONFIG.get_config_value(
'SERVER', 'gb_encrypted_diskspace_required', type=float,
default=0.1))
if not self.upstart_status('system-services'):
raise error.AutoservError('Chrome failed to reach login. '
'System services not running.')
# Factory images don't run update engine,
# goofy controls dbus on these DUTs.
if not self._is_factory_image():
self.run('update_engine_client --status')
self.verify_cros_version_label()
self.verify_firmware_status()
def verify(self):
self._repair_strategy.verify(self)
def make_ssh_command(self, user='root', port=22, opts='', hosts_file=None,
connect_timeout=None, alive_interval=None):
"""Override default make_ssh_command to use options tuned for Chrome OS.
Tuning changes:
- ConnectTimeout=30; maximum of 30 seconds allowed for an SSH
connection failure. Consistency with remote_access.sh.
- ServerAliveInterval=900; which causes SSH to ping connection every
900 seconds. In conjunction with ServerAliveCountMax ensures
that if the connection dies, Autotest will bail out.
Originally tried 60 secs, but saw frequent job ABORTS where
the test completed successfully. Later increased from 180 seconds to
900 seconds to account for tests where the DUT is suspended for
longer periods of time.
- ServerAliveCountMax=3; consistency with remote_access.sh.
- ConnectAttempts=4; reduce flakiness in connection errors;
consistency with remote_access.sh.
- UserKnownHostsFile=/dev/null; we don't care about the keys.
Host keys change with every new installation, don't waste
memory/space saving them.
- SSH protocol forced to 2; needed for ServerAliveInterval.
@param user User name to use for the ssh connection.
@param port Port on the target host to use for ssh connection.
@param opts Additional options to the ssh command.
@param hosts_file Ignored.
@param connect_timeout Ignored.
@param alive_interval Ignored.
"""
base_command = ('/usr/bin/ssh -a -x %s %s %s'
' -o StrictHostKeyChecking=no'
' -o UserKnownHostsFile=/dev/null -o BatchMode=yes'
' -o ConnectTimeout=30 -o ServerAliveInterval=900'
' -o ServerAliveCountMax=3 -o ConnectionAttempts=4'
' -o Protocol=2 -l %s -p %d')
return base_command % (self._ssh_verbosity_flag, self._ssh_options,
opts, user, port)
def syslog(self, message, tag='autotest'):
"""Logs a message to syslog on host.
@param message String message to log into syslog
@param tag String tag prefix for syslog
"""
self.run('logger -t "%s" "%s"' % (tag, message))
def _ping_check_status(self, status):
"""Ping the host once, and return whether it has a given status.
@param status Check the ping status against this value.
@return True iff `status` and the result of ping are the same
(i.e. both True or both False).
"""
ping_val = utils.ping(self.hostname, tries=1, deadline=1)
return not (status ^ (ping_val == 0))
def _ping_wait_for_status(self, status, timeout):
"""Wait for the host to have a given status (UP or DOWN).
Status is checked by polling. Polling will not last longer
than the number of seconds in `timeout`. The polling
interval will be long enough that only approximately
_PING_WAIT_COUNT polling cycles will be executed, subject
to a maximum interval of about one minute.
@param status Waiting will stop immediately if `ping` of the
host returns this status.
@param timeout Poll for at most this many seconds.
@return True iff the host status from `ping` matched the
requested status at the time of return.
"""
# _ping_check_status() takes about 1 second, hence the
# "- 1" in the formula below.
poll_interval = min(int(timeout / self._PING_WAIT_COUNT), 60) - 1
end_time = time.time() + timeout
while time.time() <= end_time:
if self._ping_check_status(status):
return True
if poll_interval > 0:
time.sleep(poll_interval)
# The last thing we did was sleep(poll_interval), so it may
# have been too long since the last `ping`. Check one more
# time, just to be sure.
return self._ping_check_status(status)
def ping_wait_up(self, timeout):
"""Wait for the host to respond to `ping`.
N.B. This method is not a reliable substitute for
`wait_up()`, because a host that responds to ping will not
necessarily respond to ssh. This method should only be used
if the target DUT can be considered functional even if it
can't be reached via ssh.
@param timeout Minimum time to allow before declaring the
host to be non-responsive.
@return True iff the host answered to ping before the timeout.
"""
return self._ping_wait_for_status(self._PING_STATUS_UP, timeout)
def ping_wait_down(self, timeout):
"""Wait until the host no longer responds to `ping`.
This function can be used as a slightly faster version of
`wait_down()`, by avoiding potentially long ssh timeouts.
@param timeout Minimum time to allow for the host to become
non-responsive.
@return True iff the host quit answering ping before the
timeout.
"""
return self._ping_wait_for_status(self._PING_STATUS_DOWN, timeout)
def test_wait_for_sleep(self, sleep_timeout=None):
"""Wait for the client to enter low-power sleep mode.
The test for "is asleep" can't distinguish a system that is
powered off; to confirm that the unit was asleep, it is
necessary to force resume, and then call
`test_wait_for_resume()`.
This function is expected to be called from a test as part
of a sequence like the following:
~~~~~~~~
boot_id = host.get_boot_id()
# trigger sleep on the host
host.test_wait_for_sleep()
# trigger resume on the host
host.test_wait_for_resume(boot_id)
~~~~~~~~
@param sleep_timeout time limit in seconds to allow the host sleep.
@exception TestFail The host did not go to sleep within
the allowed time.
"""
if sleep_timeout is None:
sleep_timeout = self.SLEEP_TIMEOUT
if not self.ping_wait_down(timeout=sleep_timeout):
raise error.TestFail(
'client failed to sleep after %d seconds' % sleep_timeout)
def test_wait_for_resume(self, old_boot_id, resume_timeout=None):
"""Wait for the client to resume from low-power sleep mode.
The `old_boot_id` parameter should be the value from
`get_boot_id()` obtained prior to entering sleep mode. A
`TestFail` exception is raised if the boot id changes.
See @ref test_wait_for_sleep for more on this function's
usage.
@param old_boot_id A boot id value obtained before the
target host went to sleep.
@param resume_timeout time limit in seconds to allow the host up.
@exception TestFail The host did not respond within the
allowed time.
@exception TestFail The host responded, but the boot id test
indicated a reboot rather than a sleep
cycle.
"""
if resume_timeout is None:
resume_timeout = self.RESUME_TIMEOUT
if not self.wait_up(timeout=resume_timeout):
raise error.TestFail(
'client failed to resume from sleep after %d seconds' %
resume_timeout)
else:
new_boot_id = self.get_boot_id()
if new_boot_id != old_boot_id:
logging.error('client rebooted (old boot %s, new boot %s)',
old_boot_id, new_boot_id)
raise error.TestFail(
'client rebooted, but sleep was expected')
def test_wait_for_shutdown(self, shutdown_timeout=None):
"""Wait for the client to shut down.
The test for "has shut down" can't distinguish a system that
is merely asleep; to confirm that the unit was down, it is
necessary to force boot, and then call test_wait_for_boot().
This function is expected to be called from a test as part
of a sequence like the following:
~~~~~~~~
boot_id = host.get_boot_id()
# trigger shutdown on the host
host.test_wait_for_shutdown()
# trigger boot on the host
host.test_wait_for_boot(boot_id)
~~~~~~~~
@param shutdown_timeout time limit in seconds to allow the host down.
@exception TestFail The host did not shut down within the
allowed time.
"""
if shutdown_timeout is None:
shutdown_timeout = self.SHUTDOWN_TIMEOUT
if not self.ping_wait_down(timeout=shutdown_timeout):
raise error.TestFail(
'client failed to shut down after %d seconds' %
shutdown_timeout)
def test_wait_for_boot(self, old_boot_id=None):
"""Wait for the client to boot from cold power.
The `old_boot_id` parameter should be the value from
`get_boot_id()` obtained prior to shutting down. A
`TestFail` exception is raised if the boot id does not
change. The boot id test is omitted if `old_boot_id` is not
specified.
See @ref test_wait_for_shutdown for more on this function's
usage.
@param old_boot_id A boot id value obtained before the
shut down.
@exception TestFail The host did not respond within the
allowed time.
@exception TestFail The host responded, but the boot id test
indicated that there was no reboot.
"""
if not self.wait_up(timeout=self.REBOOT_TIMEOUT):
raise error.TestFail(
'client failed to reboot after %d seconds' %
self.REBOOT_TIMEOUT)
elif old_boot_id:
if self.get_boot_id() == old_boot_id:
logging.error('client not rebooted (boot %s)',
old_boot_id)
raise error.TestFail(
'client is back up, but did not reboot')
@staticmethod
def check_for_rpm_support(hostname):
"""For a given hostname, return whether or not it is powered by an RPM.
@param hostname: hostname to check for rpm support.
@return None if this host does not follows the defined naming format
for RPM powered DUT's in the lab. If it does follow the format,
it returns a regular expression MatchObject instead.
"""
return re.match(CrosHost._RPM_HOSTNAME_REGEX, hostname)
def has_power(self):
"""For this host, return whether or not it is powered by an RPM.
@return True if this host is in the CROS lab and follows the defined
naming format.
"""
return CrosHost.check_for_rpm_support(self.hostname)
def _set_power(self, state, power_method):
"""Sets the power to the host via RPM, Servo or manual.
@param state Specifies which power state to set to DUT
@param power_method Specifies which method of power control to
use. By default "RPM" will be used. Valid values
are the strings "RPM", "manual", "servoj10".
"""
ACCEPTABLE_STATES = ['ON', 'OFF']
if state.upper() not in ACCEPTABLE_STATES:
raise error.TestError('State must be one of: %s.'
% (ACCEPTABLE_STATES,))
if power_method == self.POWER_CONTROL_SERVO:
logging.info('Setting servo port J10 to %s', state)
self.servo.set('prtctl3_pwren', state.lower())
time.sleep(self._USB_POWER_TIMEOUT)
elif power_method == self.POWER_CONTROL_MANUAL:
logging.info('You have %d seconds to set the AC power to %s.',
self._POWER_CYCLE_TIMEOUT, state)
time.sleep(self._POWER_CYCLE_TIMEOUT)
else:
if not self.has_power():
raise error.TestFail('DUT does not have RPM connected.')
afe = frontend_wrappers.RetryingAFE(timeout_min=5, delay_sec=10)
afe.set_host_attribute(self._RPM_OUTLET_CHANGED, True,
hostname=self.hostname)
rpm_client.set_power(self.hostname, state.upper(), timeout_mins=5)
def power_off(self, power_method=POWER_CONTROL_RPM):
"""Turn off power to this host via RPM, Servo or manual.
@param power_method Specifies which method of power control to
use. By default "RPM" will be used. Valid values
are the strings "RPM", "manual", "servoj10".
"""
self._set_power('OFF', power_method)
def power_on(self, power_method=POWER_CONTROL_RPM):
"""Turn on power to this host via RPM, Servo or manual.
@param power_method Specifies which method of power control to
use. By default "RPM" will be used. Valid values
are the strings "RPM", "manual", "servoj10".
"""
self._set_power('ON', power_method)
def power_cycle(self, power_method=POWER_CONTROL_RPM):
"""Cycle power to this host by turning it OFF, then ON.
@param power_method Specifies which method of power control to
use. By default "RPM" will be used. Valid values
are the strings "RPM", "manual", "servoj10".
"""
if power_method in (self.POWER_CONTROL_SERVO,
self.POWER_CONTROL_MANUAL):
self.power_off(power_method=power_method)
time.sleep(self._POWER_CYCLE_TIMEOUT)
self.power_on(power_method=power_method)
else:
rpm_client.set_power(self.hostname, 'CYCLE')
def get_platform(self):
"""Determine the correct platform label for this host.
@returns a string representing this host's platform.
"""
crossystem = utils.Crossystem(self)
crossystem.init()
# Extract fwid value and use the leading part as the platform id.
# fwid generally follow the format of {platform}.{firmware version}
# Example: Alex.X.YYY.Z or Google_Alex.X.YYY.Z
platform = crossystem.fwid().split('.')[0].lower()
# Newer platforms start with 'Google_' while the older ones do not.
return platform.replace('google_', '')
def get_architecture(self):
"""Determine the correct architecture label for this host.
@returns a string representing this host's architecture.
"""
crossystem = utils.Crossystem(self)
crossystem.init()
return crossystem.arch()
def get_chrome_version(self):
"""Gets the Chrome version number and milestone as strings.
Invokes "chrome --version" to get the version number and milestone.
@return A tuple (chrome_ver, milestone) where "chrome_ver" is the
current Chrome version number as a string (in the form "W.X.Y.Z")
and "milestone" is the first component of the version number
(the "W" from "W.X.Y.Z"). If the version number cannot be parsed
in the "W.X.Y.Z" format, the "chrome_ver" will be the full output
of "chrome --version" and the milestone will be the empty string.
"""
version_string = self.run(client_constants.CHROME_VERSION_COMMAND).stdout
return utils.parse_chrome_version(version_string)
# TODO(kevcheng): change this to just return the board without the
# 'board:' prefix and fix up all the callers. Also look into removing the
# need for this method.
def get_board(self):
"""Determine the correct board label for this host.
@returns a string representing this host's board.
"""
release_info = utils.parse_cmd_output('cat /etc/lsb-release',
run_method=self.run)
return (ds_constants.BOARD_PREFIX +
release_info['CHROMEOS_RELEASE_BOARD'])
def has_lightsensor(self):
"""Determine the correct board label for this host.
@returns the string 'lightsensor' if this host has a lightsensor or
None if it does not.
"""
search_cmd = "find -L %s -maxdepth 4 | egrep '%s'" % (
self._LIGHTSENSOR_SEARCH_DIR, '|'.join(self._LIGHTSENSOR_FILES))
try:
# Run the search cmd following the symlinks. Stderr_tee is set to
# None as there can be a symlink loop, but the command will still
# execute correctly with a few messages printed to stderr.
self.run(search_cmd, stdout_tee=None, stderr_tee=None)
return 'lightsensor'
except error.AutoservRunError:
# egrep exited with a return code of 1 meaning none of the possible
# lightsensor files existed.
return None
def has_bluetooth(self):
"""Determine the correct board label for this host.
@returns the string 'bluetooth' if this host has bluetooth or
None if it does not.
"""
try:
self.run('test -d /sys/class/bluetooth/hci0')
# test exited with a return code of 0.
return 'bluetooth'
except error.AutoservRunError:
# test exited with a return code 1 meaning the directory did not
# exist.
return None
def get_accels(self):
"""
Determine the type of accelerometers on this host.
@returns a string representing this host's accelerometer type.
At present, it only returns "accel:cros-ec", for accelerometers
attached to a Chrome OS EC, or none, if no accelerometers.
"""
# Check to make sure we have ectool
rv = self.run('which ectool', ignore_status=True)
if rv.exit_status:
logging.info("No ectool cmd found, assuming no EC accelerometers")
return None
# Check that the EC supports the motionsense command
rv = self.run('ectool motionsense', ignore_status=True)
if rv.exit_status:
logging.info("EC does not support motionsense command "
"assuming no EC accelerometers")
return None
# Check that EC motion sensors are active
active = self.run('ectool motionsense active').stdout.split('\n')
if active[0] == "0":
logging.info("Motion sense inactive, assuming no EC accelerometers")
return None
logging.info("EC accelerometers found")
return 'accel:cros-ec'
def has_chameleon(self):
"""Determine if a Chameleon connected to this host.
@returns a list containing two strings ('chameleon' and
'chameleon:' + label, e.g. 'chameleon:hdmi') if this host
has a Chameleon or None if it has not.
"""
if self._chameleon_host:
return ['chameleon', 'chameleon:' + self.chameleon.get_label()]
else:
return None
def has_loopback_dongle(self):
"""Determine if an audio loopback dongle is plugged to this host.
@returns 'audio_loopback_dongle' when there is an audio loopback dongle
plugged to this host.
None when there is no audio loopback dongle
plugged to this host.
"""
nodes_info = self.run(command=cras_utils.get_cras_nodes_cmd(),
ignore_status=True).stdout
if (cras_utils.node_type_is_plugged('HEADPHONE', nodes_info) and
cras_utils.node_type_is_plugged('MIC', nodes_info)):
return 'audio_loopback_dongle'
else:
return None
def get_power_supply(self):
"""
Determine what type of power supply the host has
@returns a string representing this host's power supply.
'power:battery' when the device has a battery intended for
extended use
'power:AC_primary' when the device has a battery not intended
for extended use (for moving the machine, etc)
'power:AC_only' when the device has no battery at all.
"""
psu = self.run(command='mosys psu type', ignore_status=True)
if psu.exit_status:
# The psu command for mosys is not included for all platforms. The
# assumption is that the device will have a battery if the command
# is not found.
return 'power:battery'
psu_str = psu.stdout.strip()
if psu_str == 'unknown':
return None
return 'power:%s' % psu_str
def get_storage(self):
"""
Determine the type of boot device for this host.
Determine if the internal device is SCSI or dw_mmc device.
Then check that it is SSD or HDD or eMMC or something else.
@returns a string representing this host's internal device type.
'storage:ssd' when internal device is solid state drive
'storage:hdd' when internal device is hard disk drive
'storage:mmc' when internal device is mmc drive
None When internal device is something else or
when we are unable to determine the type
"""
# The output should be /dev/mmcblk* for SD/eMMC or /dev/sd* for scsi
rootdev_cmd = ' '.join(['. /usr/sbin/write_gpt.sh;',
'. /usr/share/misc/chromeos-common.sh;',
'load_base_vars;',
'get_fixed_dst_drive'])
rootdev = self.run(command=rootdev_cmd, ignore_status=True)
if rootdev.exit_status:
logging.info("Fail to run %s", rootdev_cmd)
return None
rootdev_str = rootdev.stdout.strip()
if not rootdev_str:
return None
rootdev_base = os.path.basename(rootdev_str)
mmc_pattern = '/dev/mmcblk[0-9]'
if re.match(mmc_pattern, rootdev_str):
# Use type to determine if the internal device is eMMC or somthing
# else. We can assume that MMC is always an internal device.
type_cmd = 'cat /sys/block/%s/device/type' % rootdev_base
type = self.run(command=type_cmd, ignore_status=True)
if type.exit_status:
logging.info("Fail to run %s", type_cmd)
return None
type_str = type.stdout.strip()
if type_str == 'MMC':
return 'storage:mmc'
scsi_pattern = '/dev/sd[a-z]+'
if re.match(scsi_pattern, rootdev.stdout):
# Read symlink for /sys/block/sd* to determine if the internal
# device is connected via ata or usb.
link_cmd = 'readlink /sys/block/%s' % rootdev_base
link = self.run(command=link_cmd, ignore_status=True)
if link.exit_status:
logging.info("Fail to run %s", link_cmd)
return None
link_str = link.stdout.strip()
if 'usb' in link_str:
return None
# Read rotation to determine if the internal device is ssd or hdd.
rotate_cmd = str('cat /sys/block/%s/queue/rotational'
% rootdev_base)
rotate = self.run(command=rotate_cmd, ignore_status=True)
if rotate.exit_status:
logging.info("Fail to run %s", rotate_cmd)
return None
rotate_str = rotate.stdout.strip()
rotate_dict = {'0':'storage:ssd', '1':'storage:hdd'}
return rotate_dict.get(rotate_str)
# All other internal device / error case will always fall here
return None
def get_servo(self):
"""Determine if the host has a servo attached.
If the host has a working servo attached, it should have a servo label.
@return: string 'servo' if the host has servo attached. Otherwise,
returns None.
"""
return 'servo' if self._servo_host else None
def get_video_labels(self):
"""Run /usr/local/bin/avtest_label_detect to get a list of video labels.
Sample output of avtest_label_detect:
Detected label: hw_video_acc_vp8
Detected label: webcam
@return: A list of labels detected by tool avtest_label_detect.
"""
try:
result = self.run('/usr/local/bin/avtest_label_detect').stdout
return re.findall('^Detected label: (\w+)$', result, re.M)
except error.AutoservRunError:
# The tool is not installed.
return []
def is_video_glitch_detection_supported(self):
""" Determine if a board under test is supported for video glitch
detection tests.
@return: 'video_glitch_detection' if board is supported, None otherwise.
"""
board = self.get_board().replace(ds_constants.BOARD_PREFIX, '')
if board in video_test_constants.SUPPORTED_BOARDS:
return 'video_glitch_detection'
return None
def get_touch(self):
"""
Determine whether board under test has a touchpad or touchscreen.
@return: A list of some combination of 'touchscreen' and 'touchpad',
depending on what is present on the device.
"""
labels = []
looking_for = ['touchpad', 'touchscreen']
player = input_playback.InputPlayback()
input_events = self.run('ls /dev/input/event*').stdout.strip().split()
filename = '/tmp/touch_labels'
for event in input_events:
self.run('evtest %s > %s' % (event, filename), timeout=1,
ignore_timeout=True)
properties = self.run('cat %s' % filename).stdout
input_type = player._determine_input_type(properties)
if input_type in looking_for:
labels.append(input_type)
looking_for.remove(input_type)
if len(looking_for) == 0:
break
self.run('rm %s' % filename)
return labels
def has_internal_display(self):
"""Determine if the device under test is equipped with an internal
display.
@return: 'internal_display' if one is present; None otherwise.
"""
from autotest_lib.client.cros.graphics import graphics_utils
from autotest_lib.client.common_lib import utils as common_utils
def __system_output(cmd):
return self.run(cmd).stdout
def __read_file(remote_path):
return self.run('cat %s' % remote_path).stdout
# Hijack the necessary client functions so that we can take advantage
# of the client lib here.
# FIXME: find a less hacky way than this
original_system_output = utils.system_output
original_read_file = common_utils.read_file
utils.system_output = __system_output
common_utils.read_file = __read_file
try:
return ('internal_display' if graphics_utils.has_internal_display()
else None)
finally:
utils.system_output = original_system_output
common_utils.read_file = original_read_file
def has_lucid_sleep_support(self):
"""Determine if the device under test has support for lucid sleep.
@return 'lucidsleep' if this board supports lucid sleep; None otherwise
"""
board = self.get_board().replace(ds_constants.BOARD_PREFIX, '')
return 'lucidsleep' if board in LUCID_SLEEP_BOARDS else None
def is_boot_from_usb(self):
"""Check if DUT is boot from USB.
@return: True if DUT is boot from usb.
"""
device = self.run('rootdev -s -d').stdout.strip()
removable = int(self.run('cat /sys/block/%s/removable' %
os.path.basename(device)).stdout.strip())
return removable == 1
def read_from_meminfo(self, key):
"""Return the memory info from /proc/meminfo
@param key: meminfo requested
@return the memory value as a string
"""
meminfo = self.run('grep %s /proc/meminfo' % key).stdout.strip()
logging.debug('%s', meminfo)
return int(re.search(r'\d+', meminfo).group(0))
def get_cpu_arch(self):
"""Returns CPU arch of the device.
@return CPU architecture of the DUT.
"""
# Add CPUs by following logic in client/bin/base_utils.py.
if self.run("grep '^flags.*:.* lm .*' /proc/cpuinfo",
ignore_status=True).stdout:
return 'x86_64'
if self.run("grep -Ei 'ARM|CPU implementer' /proc/cpuinfo",
ignore_status=True).stdout:
return 'arm'
return 'i386'
def get_board_type(self):
"""
Get the DUT's device type from /etc/lsb-release.
DEVICETYPE can be one of CHROMEBOX, CHROMEBASE, CHROMEBOOK or more.
@return value of DEVICETYPE param from lsb-release.
"""
device_type = self.run('grep DEVICETYPE /etc/lsb-release',
ignore_status=True).stdout
if device_type:
return device_type.split('=')[-1].strip()
return ''
def get_os_type(self):
return 'cros'
def enable_adb_testing(self):
"""Mark this host as an adb tester."""
self.run('touch %s' % constants.ANDROID_TESTER_FILEFLAG)
def get_labels(self):
"""Return the detected labels on the host."""
return self.labels.get_labels(self)
def update_labels(self):
"""Update the labels on the host."""
self.labels.update_labels(self)