| # Copyright 2018 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import logging |
| import re |
| import time |
| |
| from autotest_lib.client.common_lib import error |
| from autotest_lib.client.common_lib.cros import cr50_utils |
| from autotest_lib.server.cros.faft.cr50_test import Cr50Test |
| |
| |
| class firmware_Cr50RMAOpen(Cr50Test): |
| """Verify Cr50 RMA behavoior |
| |
| Verify a couple of things: |
| - basic open from AP and command line |
| - Rate limiting |
| - Authcodes can't be reused once another challenge is generated. |
| - if the image is prod signed with mp flags, it isn't using test keys |
| |
| Generate the challenge and calculate the response using rma_reset -c. Verify |
| open works and enables all of the ccd features. |
| |
| If the generated challenge has the wrong version, make sure the challenge |
| generated with the test key fails. |
| """ |
| version = 1 |
| |
| # Various Error Messages from the command line and AP RMA failures |
| MISMATCH_CLI = 'Auth code does not match.' |
| MISMATCH_AP = 'rma unlock failed, code 6' |
| # Starting in 0.4.8 cr50 doesn't print "RMA Auth error 0x504". It doesn't |
| # print anything. Once prod and prepvt versions do this remove the error |
| # code from the test. |
| LIMIT_CLI = '(RMA Auth error 0x504|rma_auth\s+>)' |
| LIMIT_AP = 'error 4' |
| ERR_DISABLE_AP = 'error 7' |
| DISABLE_WARNING = ('mux_client_request_session: read from master failed: ' |
| 'Broken pipe') |
| # GSCTool exit statuses |
| UPDATE_ERROR = 3 |
| SUCCESS = 0 |
| # Cr50 limits generating challenges to once every 10 seconds |
| CHALLENGE_INTERVAL = 10 |
| SHORT_WAIT = 3 |
| # Cr50 RMA commands can be sent from the AP or command line. They should |
| # behave the same and be interchangeable |
| CMD_INTERFACES = ['ap', 'cli'] |
| |
| def initialize(self, host, cmdline_args, full_args): |
| """Initialize the test""" |
| super(firmware_Cr50RMAOpen, self).initialize(host, cmdline_args, |
| full_args) |
| self.host = host |
| |
| if not hasattr(self, 'cr50'): |
| raise error.TestNAError('Test can only be run on devices with ' |
| 'access to the Cr50 console') |
| |
| if not self.cr50.has_command('rma_auth'): |
| raise error.TestNAError('Cannot test on Cr50 without RMA support') |
| |
| if not self.cr50.using_servo_v4(): |
| raise error.TestNAError('This messes with ccd settings. Use flex ' |
| 'cable to run the test.') |
| |
| if self.host.run('rma_reset -h', ignore_status=True).exit_status == 127: |
| raise error.TestNAError('Cannot test RMA open without rma_reset') |
| |
| # Attempt to disable factory mode. If factory mode isn't enabled this |
| # will fail. Ignore the exit status no matter what. Init will make sure |
| # all capabilities are set to default before running the test. |
| logging.info(cr50_utils.GSCTool(self.host, ['-a', '-F', 'disable'], |
| ignore_status=True)) |
| # Disable all capabilities at the start of the test. Go ahead and enable |
| # testlab mode if it isn't enabled. |
| if not self.ccd_lockout: |
| self.fast_open(enable_testlab=True) |
| self.cr50.send_command('ccd reset') |
| self.cr50.set_ccd_level('lock') |
| self.check_ccd_cap_settings(False) |
| |
| # Make sure all capabilities are set to default. |
| try: |
| self.check_ccd_cap_settings(False) |
| except error.TestFail: |
| raise error.TestError('Could not disable rma mode') |
| |
| self.is_prod_mp = self.get_prod_mp_status() |
| |
| |
| def get_prod_mp_status(self): |
| """Returns True if Cr50 is running a prod signed mp flagged image""" |
| # Determine if the running image is using premp flags |
| bid = self.cr50.get_active_board_id_str() |
| premp_flags = int(bid.split(':')[2], 16) & 0x10 if bid else False |
| |
| # Check if the running image is signed with prod keys |
| prod_keys = self.cr50.using_prod_rw_keys() |
| logging.info('%s keys with %s flags', 'prod' if prod_keys else 'dev', |
| 'premp' if premp_flags else 'mp') |
| return not premp_flags and prod_keys |
| |
| |
| def parse_challenge(self, challenge): |
| """Remove the whitespace from the challenge""" |
| return re.sub('\s', '', challenge.strip()) |
| |
| |
| def generate_response(self, challenge): |
| """Generate the authcode from the challenge. |
| |
| Args: |
| challenge: The Cr50 challenge string |
| |
| Returns: |
| A tuple of the authcode and a bool True if the response should |
| work False if it shouldn't |
| """ |
| stdout = self.host.run('rma_reset -c ' + challenge).stdout |
| logging.info(stdout) |
| # rma_reset generates authcodes with the test key. MP images should use |
| # prod keys. Make sure prod signed MP images aren't using the test key. |
| self.prod_keyid = 'Unsupported' in stdout |
| if self.is_prod_mp and not self.prod_keyid: |
| raise error.TestFail('MP image cannot use test key') |
| return re.search('Authcode: +(\S+)', stdout).group(1), self.prod_keyid |
| |
| |
| def rma_cli(self, authcode='', disable=False, expected_exit_status=SUCCESS): |
| """Run RMA commands using the command line. |
| |
| Args: |
| authcode: The authcode string |
| disable: True if RMA open should be disabled. |
| expected_exit_status: the expected exit status |
| |
| Returns: |
| The entire stdout from the command or the RMA challenge |
| """ |
| cmd = 'rma_auth ' + ('disable' if disable else authcode) |
| get_challenge = not (authcode or disable) |
| resp = 'rma_auth(.*generated challenge:)?(.*)>' |
| if expected_exit_status: |
| resp = self.LIMIT_CLI if get_challenge else self.MISMATCH_CLI |
| |
| result = self.cr50.send_command_get_output(cmd, [resp]) |
| logging.info(result) |
| return (self.parse_challenge(result[0][-1]) if get_challenge else |
| result[0]) |
| |
| |
| def rma_ap(self, authcode='', disable=False, expected_exit_status=SUCCESS): |
| """Run RMA commands using vendor commands from the ap. |
| |
| Args: |
| authcode: the authcode string. |
| disable: True if RMA open should be disabled. |
| expected_exit_status: the expected exit status |
| |
| Returns: |
| The entire stdout from the command or the RMA challenge |
| |
| Raises: |
| error.TestFail if there is an unexpected gsctool response |
| """ |
| if disable: |
| cmd = '-a -F disable' |
| else: |
| cmd = '-a -r ' + authcode |
| get_challenge = not (authcode or disable) |
| |
| expected_stderr = '' |
| if expected_exit_status: |
| if authcode: |
| expected_stderr = self.MISMATCH_AP |
| elif disable: |
| expected_stderr = self.ERR_DISABLE_AP |
| else: |
| expected_stderr = self.LIMIT_AP |
| |
| result = cr50_utils.GSCTool(self.host, cmd.split(), |
| ignore_status=expected_stderr) |
| logging.info(result) |
| # Various connection issues result in warnings. If there is a real issue |
| # the expected_exit_status will raise it. Ignore any warning messages in |
| # stderr. |
| ignore_stderr = 'WARNING' in result.stderr and not expected_stderr |
| if not ignore_stderr and expected_stderr not in result.stderr.strip(): |
| raise error.TestFail('Unexpected stderr: expected %s got %s' % |
| (expected_stderr, result.stderr.strip())) |
| if result.exit_status != expected_exit_status: |
| raise error.TestFail('Unexpected exit_status: expected %s got %s' % |
| (expected_exit_status, result.exit_status)) |
| if get_challenge: |
| return self.parse_challenge(result.stdout.split('Challenge:')[-1]) |
| return result.stdout |
| |
| |
| def check_ccd_cap_settings(self, rma_opened): |
| """Verify the ccd capability permissions match the RMA state |
| |
| Args: |
| rma_opened: True if we expect Cr50 to be RMA opened |
| |
| Raises: |
| TestFail if Cr50 is opened when it should be closed or it is closed |
| when it should be opened. |
| """ |
| time.sleep(self.SHORT_WAIT) |
| caps = self.cr50.get_cap_dict().values() |
| closed = len(caps) == caps.count('Default') |
| opened = len(caps) == caps.count('Always') |
| |
| if rma_opened and not opened: |
| raise error.TestFail('Not all capablities were set to Always') |
| if not rma_opened and not closed: |
| raise error.TestFail('Not all capablities were set to Default') |
| |
| |
| def rma_open(self, challenge_func, auth_func): |
| """Run the RMA open process |
| |
| Run the RMA open process with the given functions. Use challenge func |
| to generate the challenge and auth func to verify the authcode. The |
| commands can be sent from the command line or ap. Both should be able |
| to be used as the challenge or auth function interchangeably. |
| |
| Args: |
| challenge_func: The method used to generate the challenge |
| auth_func: The method used to verify the authcode |
| """ |
| time.sleep(self.CHALLENGE_INTERVAL) |
| |
| # Get the challenge |
| challenge = challenge_func() |
| logging.info(challenge) |
| |
| # Try using the challenge. If the Cr50 KeyId is not supported, make sure |
| # RMA open fails. |
| authcode, unsupported_key = self.generate_response(challenge) |
| exit_status = self.UPDATE_ERROR if unsupported_key else self.SUCCESS |
| |
| # Attempt RMA open with the given authcode |
| auth_func(authcode=authcode, expected_exit_status=exit_status) |
| |
| # Make sure capabilities are in the correct state. |
| self.check_ccd_cap_settings(not unsupported_key) |
| |
| # Force enable write protect, so we can make sure it's reset after RMA |
| # disable |
| if not unsupported_key: |
| logging.info(self.cr50.send_command_get_output('wp enable', |
| ['wp.*>'])) |
| |
| # Run RMA disable to reset the capabilities. |
| self.rma_ap(disable=True, expected_exit_status=exit_status) |
| |
| # Confirm write protect has been reset to follow battery presence. The |
| # WP state may be enabled or disabled. The state just can't be forced. |
| logging.info(self.cr50.send_command_get_output('wp', |
| ['Flash WP: (enabled|disabled)'])) |
| # Make sure capabilities have been reset |
| self.check_ccd_cap_settings(False) |
| |
| |
| def rate_limit_check(self, rma_func1, rma_func2): |
| """Verify that Cr50 ratelimits challenge generation from any interface |
| |
| Get the challenge from rma_func1. Try to generate a challenge with |
| rma_func2 in a time less than challenge_interval. Make sure it fails. |
| Wait a little bit longer and make sure the function then succeeds. |
| |
| Args: |
| rma_func1: the method to generate the first challenge |
| rma_func2: the method to generate the second challenge |
| """ |
| time.sleep(self.CHALLENGE_INTERVAL) |
| rma_func1() |
| |
| # Wait too short of a time. Verify challenge generation fails |
| time.sleep(self.CHALLENGE_INTERVAL - self.SHORT_WAIT) |
| rma_func2(expected_exit_status=self.UPDATE_ERROR) |
| |
| # Wait long enough for the timeout to have elapsed. Verify another |
| # challenge is generated. |
| time.sleep(self.SHORT_WAIT) |
| rma_func2() |
| |
| |
| def challenge_reset(self, rma_func1, rma_func2): |
| """Verify a response for a previous challenge can't be used again |
| |
| Generate 2 challenges. Verify only the authcode from the second |
| challenge can be used to open the device. |
| |
| Args: |
| rma_func1: the method to generate the first challenge |
| rma_func2: the method to generate the second challenge |
| """ |
| time.sleep(self.CHALLENGE_INTERVAL) |
| challenge1 = rma_func1() |
| authcode1 = self.generate_response(challenge1)[0] |
| |
| time.sleep(self.CHALLENGE_INTERVAL) |
| challenge2 = rma_func2() |
| authcode2 = self.generate_response(challenge2)[0] |
| |
| rma_func1(authcode1, expected_exit_status=self.UPDATE_ERROR) |
| rma_func1(authcode2) |
| |
| time.sleep(self.SHORT_WAIT) |
| |
| self.rma_ap(disable=True) |
| |
| |
| def verify_interface_combinations(self, test_func): |
| """Run through tests using ap and cli |
| |
| Cr50 can run RMA commands from the AP or command line. Test sending |
| commands from both, so we know there aren't any weird interactions |
| between the two. |
| |
| Args: |
| test_func: The function to verify some RMA behavior |
| """ |
| for rma_interface1 in self.CMD_INTERFACES: |
| rma_func1 = getattr(self, 'rma_' + rma_interface1) |
| for rma_interface2 in self.CMD_INTERFACES: |
| rma_func2 = getattr(self, 'rma_' + rma_interface2) |
| test_func(rma_func1, rma_func2) |
| |
| |
| def run_once(self): |
| """Verify Cr50 RMA behavior""" |
| self.verify_interface_combinations(self.rate_limit_check) |
| |
| self.verify_interface_combinations(self.rma_open) |
| |
| # We can only do RMA unlock with test keys, so this won't be useful |
| # to run unless the Cr50 image is using test keys. |
| if not self.prod_keyid: |
| self.verify_interface_combinations(self.challenge_reset) |
