| # Copyright 2015 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| import logging |
| import time |
| import sys |
| |
| from multiprocessing import Process |
| from autotest_lib.client.bin import utils |
| from autotest_lib.client.common_lib import error |
| from autotest_lib.client.cros.faft.utils import shell_wrapper |
| |
| class ConnectionError(Exception): |
| """Raised on an error of connecting DUT.""" |
| pass |
| |
| |
| class _BaseFwBypasser(object): |
| """Base class that controls bypass logic for firmware screens.""" |
| |
| def __init__(self, faft_framework): |
| self.servo = faft_framework.servo |
| self.faft_config = faft_framework.faft_config |
| self.client_host = faft_framework._client |
| |
| |
| def bypass_dev_mode(self): |
| """Bypass the dev mode firmware logic to boot internal image.""" |
| raise NotImplementedError |
| |
| |
| def bypass_dev_boot_usb(self): |
| """Bypass the dev mode firmware logic to boot USB.""" |
| raise NotImplementedError |
| |
| |
| def bypass_rec_mode(self): |
| """Bypass the rec mode firmware logic to boot USB.""" |
| raise NotImplementedError |
| |
| |
| def trigger_dev_to_rec(self): |
| """Trigger to the rec mode from the dev screen.""" |
| raise NotImplementedError |
| |
| |
| def trigger_rec_to_dev(self): |
| """Trigger to the dev mode from the rec screen.""" |
| raise NotImplementedError |
| |
| |
| def trigger_dev_to_normal(self): |
| """Trigger to the normal mode from the dev screen.""" |
| raise NotImplementedError |
| |
| |
| class _CtrlDBypasser(_BaseFwBypasser): |
| """Controls bypass logic via Ctrl-D combo.""" |
| |
| def bypass_dev_mode(self): |
| """Bypass the dev mode firmware logic to boot internal image.""" |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.ctrl_d() |
| |
| |
| def bypass_dev_boot_usb(self): |
| """Bypass the dev mode firmware logic to boot USB.""" |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.ctrl_u() |
| |
| |
| def bypass_rec_mode(self): |
| """Bypass the rec mode firmware logic to boot USB.""" |
| self.servo.switch_usbkey('host') |
| time.sleep(self.faft_config.usb_plug) |
| self.servo.switch_usbkey('dut') |
| logging.info('Enabled dut_sees_usb') |
| if not self.client_host.ping_wait_up( |
| timeout=self.faft_config.delay_reboot_to_ping): |
| logging.info('ping timed out, try REC_ON') |
| psc = self.servo.get_power_state_controller() |
| psc.power_on(psc.REC_ON) |
| |
| |
| def trigger_dev_to_rec(self): |
| """Trigger to the rec mode from the dev screen.""" |
| time.sleep(self.faft_config.firmware_screen) |
| |
| # Pressing Enter for too long triggers a second key press. |
| # Let's press it without delay |
| self.servo.enter_key(press_secs=0) |
| |
| # For Alex/ZGB, there is a dev warning screen in text mode. |
| # Skip it by pressing Ctrl-D. |
| if self.faft_config.need_dev_transition: |
| time.sleep(self.faft_config.legacy_text_screen) |
| self.servo.ctrl_d() |
| |
| |
| def trigger_rec_to_dev(self): |
| """Trigger to the dev mode from the rec screen.""" |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.ctrl_d() |
| time.sleep(self.faft_config.confirm_screen) |
| if self.faft_config.rec_button_dev_switch: |
| logging.info('RECOVERY button pressed to switch to dev mode') |
| self.servo.toggle_recovery_switch() |
| else: |
| logging.info('ENTER pressed to switch to dev mode') |
| self.servo.enter_key() |
| |
| |
| def trigger_dev_to_normal(self): |
| """Trigger to the normal mode from the dev screen.""" |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.enter_key() |
| time.sleep(self.faft_config.confirm_screen) |
| self.servo.enter_key() |
| |
| |
| class _JetstreamBypasser(_BaseFwBypasser): |
| """Controls bypass logic of Jetstream devices.""" |
| |
| def bypass_dev_mode(self): |
| """Bypass the dev mode firmware logic to boot internal image.""" |
| # Jetstream does nothing to bypass. |
| pass |
| |
| |
| def bypass_dev_boot_usb(self): |
| """Bypass the dev mode firmware logic to boot USB.""" |
| self.servo.switch_usbkey('dut') |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.toggle_development_switch() |
| |
| |
| def bypass_rec_mode(self): |
| """Bypass the rec mode firmware logic to boot USB.""" |
| self.servo.switch_usbkey('host') |
| time.sleep(self.faft_config.usb_plug) |
| self.servo.switch_usbkey('dut') |
| if not self.client_host.ping_wait_up( |
| timeout=self.faft_config.delay_reboot_to_ping): |
| psc = self.servo.get_power_state_controller() |
| psc.power_on(psc.REC_ON) |
| |
| |
| def trigger_dev_to_rec(self): |
| """Trigger to the rec mode from the dev screen.""" |
| # Jetstream does not have this triggering logic. |
| raise NotImplementedError |
| |
| |
| def trigger_rec_to_dev(self): |
| """Trigger to the dev mode from the rec screen.""" |
| self.servo.disable_development_mode() |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.toggle_development_switch() |
| |
| |
| def trigger_dev_to_normal(self): |
| """Trigger to the normal mode from the dev screen.""" |
| # Jetstream does not have this triggering logic. |
| raise NotImplementedError |
| |
| |
| class _TabletDetachableBypasser(_BaseFwBypasser): |
| """Controls bypass logic of tablet/ detachable chromebook devices.""" |
| |
| def set_button(self, button, duration, info): |
| """Helper method that sets the button hold time for UI selections""" |
| self.servo.set_nocheck(button, duration) |
| time.sleep(self.faft_config.confirm_screen) |
| logging.info(info) |
| |
| |
| def bypass_dev_boot_usb(self): |
| """Bypass the dev mode firmware logic to boot USB. |
| |
| On tablets/ detachables, recovery entered by pressing pwr, vol up |
| & vol down buttons for 10s. |
| Menu options seen in DEVELOPER WARNING screen: |
| Developer Options |
| Show Debug Info |
| Enable Root Verification |
| Power Off* |
| Language |
| Menu options seen in DEV screen: |
| Boot legacy BIOS |
| Boot USB image |
| Boot developer image* |
| Cancel |
| Power off |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| self.trigger_dev_screen() |
| time.sleep(self.faft_config.firmware_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting power as' |
| ' enter key to select Boot USB Image')) |
| self.servo.power_short_press() |
| |
| |
| def bypass_rec_mode(self): |
| """Bypass the rec mode firmware logic to boot USB.""" |
| self.servo.switch_usbkey('host') |
| time.sleep(self.faft_config.usb_plug) |
| self.servo.switch_usbkey('dut') |
| logging.info('Enabled dut_sees_usb') |
| if not self.client_host.ping_wait_up( |
| timeout=self.faft_config.delay_reboot_to_ping): |
| logging.info('ping timed out, try REC_ON') |
| psc = self.servo.get_power_state_controller() |
| psc.power_on(psc.REC_ON) |
| |
| |
| def bypass_dev_mode(self): |
| """Bypass the dev mode firmware logic to boot internal image |
| |
| On tablets/ detachables, recovery entered by pressing pwr, vol up |
| & vol down buttons for 10s. |
| Menu options seen in DEVELOPER WARNING screen: |
| Developer Options |
| Show Debug Info |
| Enable Root Verification |
| Power Off* |
| Language |
| Menu options seen in DEV screen: |
| Boot legacy BIOS |
| Boot USB image |
| Boot developer image* |
| Cancel |
| Power off |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| self.trigger_dev_screen() |
| time.sleep(self.faft_config.firmware_screen) |
| logging.info('Selecting power as enter key to select ' |
| 'Boot Developer Image') |
| self.servo.power_short_press() |
| |
| |
| def trigger_dev_screen(self): |
| """Helper method that transitions from DEVELOPER WARNING to DEV screen |
| |
| Menu options seen in DEVELOPER WARNING screen: |
| Developer Options |
| Show Debug Info |
| Enable Root Verification |
| Power Off* |
| Language |
| Menu options seen in DEV screen: |
| Boot legacy BIOS |
| Boot USB image |
| Boot developer image* |
| Cancel |
| Power off |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| time.sleep(self.faft_config.firmware_screen) |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.set_nocheck('volume_up_hold', 100) |
| time.sleep(self.faft_config.confirm_screen) |
| self.servo.set_nocheck('volume_up_hold', 100) |
| time.sleep(self.faft_config.confirm_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting power ' |
| 'as enter key to select Developer Options')) |
| self.servo.power_short_press() |
| |
| |
| def trigger_rec_to_dev(self): |
| """Trigger to the dev mode from the rec screen using vol up button. |
| |
| On tablets/ detachables, recovery entered by pressing pwr, vol up |
| & vol down buttons for 10s. |
| Menu options seen in RECOVERY screen: |
| Enable Developer Mode |
| Show Debug Info |
| Power off* |
| Language |
| Menu options seen in TO_DEV screen: |
| Confirm enabling developer mode |
| Cancel |
| Power off* |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| time.sleep(self.faft_config.firmware_screen) |
| self.set_button('volume_up_hold', 100, ('Enter Recovery Menu.')) |
| time.sleep(self.faft_config.confirm_screen) |
| self.servo.set_nocheck('volume_up_hold', 100) |
| time.sleep(self.faft_config.confirm_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting power as ' |
| 'enter key to select Enable Developer Mode')) |
| self.servo.power_short_press() |
| logging.info('Transitioning from REC to TO_DEV screen.') |
| time.sleep(self.faft_config.confirm_screen) |
| self.servo.set_nocheck('volume_up_hold', 100) |
| time.sleep(self.faft_config.confirm_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting power as ' |
| 'enter key to select Confirm enabling ' |
| 'developer mode')) |
| self.servo.power_short_press() |
| time.sleep(self.faft_config.firmware_screen) |
| |
| |
| def trigger_dev_to_normal(self): |
| """Trigger to the normal mode from the dev screen. |
| |
| Menu options seen in DEVELOPER WARNING screen: |
| Developer Options |
| Show Debug Info |
| Enable Root Verification |
| Power Off* |
| Language |
| Menu options seen in TO_NORM screen: |
| Confirm Enabling Verified Boot |
| Cancel |
| Power off* |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| time.sleep(self.faft_config.firmware_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting ' |
| 'Enable Root Verification using pwr ' |
| 'button to enter TO_NORM screen')) |
| self.servo.power_short_press() |
| time.sleep(self.faft_config.firmware_screen) |
| self.servo.set_nocheck('volume_up_hold', 100) |
| time.sleep(self.faft_config.confirm_screen) |
| self.set_button('volume_up_hold', 100, ('Selecting Confirm ' |
| 'Enabling Verified Boot using pwr ' |
| 'button in TO_NORM screen')) |
| self.servo.power_short_press() |
| |
| |
| def _create_fw_bypasser(faft_framework): |
| """Creates a proper firmware bypasser. |
| |
| @param faft_framework: The main FAFT framework object. |
| """ |
| bypasser_type = faft_framework.faft_config.fw_bypasser_type |
| if bypasser_type == 'ctrl_d_bypasser': |
| logging.info('Create a CtrlDBypasser') |
| return _CtrlDBypasser(faft_framework) |
| elif bypasser_type == 'jetstream_bypasser': |
| logging.info('Create a JetstreamBypasser') |
| return _JetstreamBypasser(faft_framework) |
| elif bypasser_type == 'ryu_bypasser': |
| # FIXME Create an RyuBypasser |
| logging.info('Create a CtrlDBypasser') |
| return _CtrlDBypasser(faft_framework) |
| elif bypasser_type == 'tablet_detachable_bypasser': |
| logging.info('Create a TabletDetachableBypasser') |
| return _TabletDetachableBypasser(faft_framework) |
| else: |
| raise NotImplementedError('Not supported fw_bypasser_type: %s', |
| bypasser_type) |
| |
| |
| class _BaseModeSwitcher(object): |
| """Base class that controls firmware mode switching.""" |
| |
| def __init__(self, faft_framework): |
| self.faft_framework = faft_framework |
| self.client_host = faft_framework._client |
| self.faft_client = faft_framework.faft_client |
| self.servo = faft_framework.servo |
| self.faft_config = faft_framework.faft_config |
| self.checkers = faft_framework.checkers |
| self.bypasser = _create_fw_bypasser(faft_framework) |
| self._backup_mode = None |
| |
| |
| def setup_mode(self, mode): |
| """Setup for the requested mode. |
| |
| It makes sure the system in the requested mode. If not, it tries to |
| do so. |
| |
| @param mode: A string of mode, one of 'normal', 'dev', or 'rec'. |
| """ |
| if not self.checkers.mode_checker(mode): |
| logging.info('System not in expected %s mode. Reboot into it.', |
| mode) |
| if self._backup_mode is None: |
| # Only resume to normal/dev mode after test, not recovery. |
| self._backup_mode = 'dev' if mode == 'normal' else 'normal' |
| self.reboot_to_mode(mode) |
| |
| |
| def restore_mode(self): |
| """Restores original dev mode status if it has changed.""" |
| if self._backup_mode is not None: |
| self.reboot_to_mode(self._backup_mode) |
| |
| |
| def reboot_to_mode(self, to_mode, from_mode=None, sync_before_boot=True, |
| wait_for_dut_up=True): |
| """Reboot and execute the mode switching sequence. |
| |
| @param to_mode: The target mode, one of 'normal', 'dev', or 'rec'. |
| @param from_mode: The original mode, optional, one of 'normal, 'dev', |
| or 'rec'. |
| @param sync_before_boot: True to sync to disk before booting. |
| @param wait_for_dut_up: True to wait DUT online again. False to do the |
| reboot and mode switching sequence only and may |
| need more operations to pass the firmware |
| screen. |
| """ |
| logging.info('-[ModeSwitcher]-[ start reboot_to_mode(%r, %r, %r) ]-', |
| to_mode, from_mode, wait_for_dut_up) |
| if sync_before_boot: |
| self.faft_framework.blocking_sync() |
| if to_mode == 'rec': |
| self._enable_rec_mode_and_reboot(usb_state='dut') |
| if wait_for_dut_up: |
| self.wait_for_client() |
| |
| elif to_mode == 'dev': |
| self._enable_dev_mode_and_reboot() |
| if wait_for_dut_up: |
| self.bypass_dev_mode() |
| self.wait_for_client() |
| |
| elif to_mode == 'normal': |
| self._enable_normal_mode_and_reboot() |
| if wait_for_dut_up: |
| self.wait_for_client() |
| |
| else: |
| raise NotImplementedError( |
| 'Not supported mode switching from %s to %s' % |
| (str(from_mode), to_mode)) |
| logging.info('-[ModeSwitcher]-[ end reboot_to_mode(%r, %r, %r) ]-', |
| to_mode, from_mode, wait_for_dut_up) |
| |
| def simple_reboot(self, reboot_type='warm', sync_before_boot=True): |
| """Simple reboot method |
| |
| Just reboot the DUT using either cold or warm reset. Does not wait for |
| DUT to come back online. Will wait for test to handle this. |
| |
| @param reboot_type: A string of reboot type, 'warm' or 'cold'. |
| If reboot_type != warm/cold, raise exception. |
| @param sync_before_boot: True to sync to disk before booting. |
| If sync_before_boot=False, DUT offline before |
| calling mode_aware_reboot. |
| """ |
| if reboot_type == 'warm': |
| reboot_method = self.servo.get_power_state_controller().warm_reset |
| elif reboot_type == 'cold': |
| reboot_method = self.servo.get_power_state_controller().reset |
| else: |
| raise NotImplementedError('Not supported reboot_type: %s', |
| reboot_type) |
| if sync_before_boot: |
| boot_id = self.faft_framework.get_bootid() |
| self.faft_framework.blocking_sync() |
| logging.info("-[ModeSwitcher]-[ start simple_reboot(%r) ]-", |
| reboot_type) |
| reboot_method() |
| if sync_before_boot: |
| self.wait_for_client_offline(orig_boot_id=boot_id) |
| logging.info("-[ModeSwitcher]-[ end simple_reboot(%r) ]-", |
| reboot_type) |
| |
| def mode_aware_reboot(self, reboot_type=None, reboot_method=None, |
| sync_before_boot=True, wait_for_dut_up=True): |
| """Uses a mode-aware way to reboot DUT. |
| |
| For example, if DUT is in dev mode, it requires pressing Ctrl-D to |
| bypass the developer screen. |
| |
| @param reboot_type: A string of reboot type, one of 'warm', 'cold', or |
| 'custom'. Default is a warm reboot. |
| @param reboot_method: A custom method to do the reboot. Only use it if |
| reboot_type='custom'. |
| @param sync_before_boot: True to sync to disk before booting. |
| If sync_before_boot=False, DUT offline before |
| calling mode_aware_reboot. |
| @param wait_for_dut_up: True to wait DUT online again. False to do the |
| reboot only. |
| """ |
| if reboot_type is None or reboot_type == 'warm': |
| reboot_method = self.servo.get_power_state_controller().warm_reset |
| elif reboot_type == 'cold': |
| reboot_method = self.servo.get_power_state_controller().reset |
| elif reboot_type != 'custom': |
| raise NotImplementedError('Not supported reboot_type: %s', |
| reboot_type) |
| |
| logging.info("-[ModeSwitcher]-[ start mode_aware_reboot(%r, %s, ..) ]-", |
| reboot_type, reboot_method.__name__) |
| is_dev = False |
| if sync_before_boot: |
| is_dev = self.checkers.mode_checker('dev') |
| boot_id = self.faft_framework.get_bootid() |
| self.faft_framework.blocking_sync() |
| logging.info("-[mode_aware_reboot]-[ is_dev=%s ]-", is_dev); |
| reboot_method() |
| if sync_before_boot: |
| self.wait_for_client_offline(orig_boot_id=boot_id) |
| # Encapsulating the behavior of skipping dev firmware screen, |
| # hitting ctrl-D |
| # Note that if booting from recovery mode, will not |
| # call bypass_dev_mode because can't determine prior to |
| # reboot if we're going to boot up in dev or normal mode. |
| if is_dev: |
| self.bypass_dev_mode() |
| if wait_for_dut_up: |
| self.wait_for_client() |
| logging.info("-[ModeSwitcher]-[ end mode_aware_reboot(%r, %s, ..) ]-", |
| reboot_type, reboot_method.__name__) |
| |
| |
| def _enable_rec_mode_and_reboot(self, usb_state=None): |
| """Switch to rec mode and reboot. |
| |
| This method emulates the behavior of the old physical recovery switch, |
| i.e. switch ON + reboot + switch OFF, and the new keyboard controlled |
| recovery mode, i.e. just press Power + Esc + Refresh. |
| |
| @param usb_state: A string, one of 'dut', 'host', or 'off'. |
| """ |
| psc = self.servo.get_power_state_controller() |
| psc.power_off() |
| if usb_state: |
| self.servo.switch_usbkey(usb_state) |
| psc.power_on(psc.REC_ON) |
| |
| |
| def _disable_rec_mode_and_reboot(self, usb_state=None): |
| """Disable the rec mode and reboot. |
| |
| It is achieved by calling power state controller to do a normal |
| power on. |
| """ |
| psc = self.servo.get_power_state_controller() |
| psc.power_off() |
| time.sleep(self.faft_config.ec_boot_to_pwr_button) |
| psc.power_on(psc.REC_OFF) |
| |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot.""" |
| raise NotImplementedError |
| |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot.""" |
| raise NotImplementedError |
| |
| |
| # Redirects the following methods to FwBypasser |
| def bypass_dev_mode(self): |
| """Bypass the dev mode firmware logic to boot internal image.""" |
| logging.info("-[bypass_dev_mode]-") |
| self.bypasser.bypass_dev_mode() |
| |
| |
| def bypass_dev_boot_usb(self): |
| """Bypass the dev mode firmware logic to boot USB.""" |
| logging.info("-[bypass_dev_boot_usb]-") |
| self.bypasser.bypass_dev_boot_usb() |
| |
| |
| def bypass_rec_mode(self): |
| """Bypass the rec mode firmware logic to boot USB.""" |
| logging.info("-[bypass_rec_mode]-") |
| self.bypasser.bypass_rec_mode() |
| |
| |
| def trigger_dev_to_rec(self): |
| """Trigger to the rec mode from the dev screen.""" |
| self.bypasser.trigger_dev_to_rec() |
| |
| |
| def trigger_rec_to_dev(self): |
| """Trigger to the dev mode from the rec screen.""" |
| self.bypasser.trigger_rec_to_dev() |
| |
| |
| def trigger_dev_to_normal(self): |
| """Trigger to the normal mode from the dev screen.""" |
| self.bypasser.trigger_dev_to_normal() |
| |
| |
| def wait_for_client(self, timeout=180): |
| """Wait for the client to come back online. |
| |
| New remote processes will be launched if their used flags are enabled. |
| |
| @param timeout: Time in seconds to wait for the client SSH daemon to |
| come up. |
| @raise ConnectionError: Failed to connect DUT. |
| """ |
| logging.info("-[FAFT]-[ start wait_for_client ]---") |
| # Wait for the system to respond to ping before attempting ssh |
| if not self.client_host.ping_wait_up(timeout): |
| logging.warning("-[FAFT]-[ system did not respond to ping ]") |
| if self.client_host.wait_up(timeout): |
| # Check the FAFT client is avaiable. |
| self.faft_client.system.is_available() |
| # Stop update-engine as it may change firmware/kernel. |
| self.faft_framework._stop_service('update-engine') |
| else: |
| logging.error('wait_for_client() timed out.') |
| raise ConnectionError() |
| logging.info("-[FAFT]-[ end wait_for_client ]-----") |
| |
| |
| def wait_for_client_offline(self, timeout=60, orig_boot_id=None): |
| """Wait for the client to come offline. |
| |
| @param timeout: Time in seconds to wait the client to come offline. |
| @param orig_boot_id: A string containing the original boot id. |
| @raise ConnectionError: Failed to wait DUT offline. |
| """ |
| # When running against panther, we see that sometimes |
| # ping_wait_down() does not work correctly. There needs to |
| # be some investigation to the root cause. |
| # If we sleep for 120s before running get_boot_id(), it |
| # does succeed. But if we change this to ping_wait_down() |
| # there are implications on the wait time when running |
| # commands at the fw screens. |
| if not self.client_host.ping_wait_down(timeout): |
| if orig_boot_id and self.client_host.get_boot_id() != orig_boot_id: |
| logging.warn('Reboot done very quickly.') |
| return |
| raise ConnectionError() |
| |
| |
| class _PhysicalButtonSwitcher(_BaseModeSwitcher): |
| """Class that switches firmware mode via physical button.""" |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot.""" |
| self.servo.enable_development_mode() |
| self.faft_client.system.run_shell_command( |
| 'chromeos-firmwareupdate --mode todev && reboot') |
| |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot.""" |
| self.servo.disable_development_mode() |
| self.faft_client.system.run_shell_command( |
| 'chromeos-firmwareupdate --mode tonormal && reboot') |
| |
| |
| class _KeyboardDevSwitcher(_BaseModeSwitcher): |
| """Class that switches firmware mode via keyboard combo.""" |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot.""" |
| logging.info("Enabling keyboard controlled developer mode") |
| # Rebooting EC with rec mode on. Should power on AP. |
| # Plug out USB disk for preventing recovery boot without warning |
| self._enable_rec_mode_and_reboot(usb_state='host') |
| self.wait_for_client_offline() |
| self.bypasser.trigger_rec_to_dev() |
| |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot.""" |
| logging.info("Disabling keyboard controlled developer mode") |
| self._disable_rec_mode_and_reboot() |
| self.wait_for_client_offline() |
| self.bypasser.trigger_dev_to_normal() |
| |
| |
| class _JetstreamSwitcher(_BaseModeSwitcher): |
| """Class that switches firmware mode in Jetstream devices.""" |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot.""" |
| logging.info("Enabling Jetstream developer mode") |
| self._enable_rec_mode_and_reboot(usb_state='host') |
| self.wait_for_client_offline() |
| self.bypasser.trigger_rec_to_dev() |
| |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot.""" |
| logging.info("Disabling Jetstream developer mode") |
| self.servo.disable_development_mode() |
| self._enable_rec_mode_and_reboot(usb_state='host') |
| time.sleep(self.faft_config.firmware_screen) |
| self._disable_rec_mode_and_reboot(usb_state='host') |
| |
| |
| class _TabletDetachableSwitcher(_BaseModeSwitcher): |
| """Class that switches fw mode in tablets/detachables with fw menu UI.""" |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot. |
| |
| On tablets/ detachables, recovery entered by pressing pwr, vol up |
| & vol down buttons for 10s. |
| Menu options seen in RECOVERY screen: |
| Enable Developer Mode |
| Show Debug Info |
| Power off* |
| Language |
| """ |
| logging.info('Enabling tablets/detachable recovery mode') |
| self._enable_rec_mode_and_reboot(usb_state='host') |
| self.wait_for_client_offline() |
| self.bypasser.trigger_rec_to_dev() |
| |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot. |
| |
| Menu options seen in DEVELOPER WARNING screen: |
| Developer Options |
| Show Debug Info |
| Enable Root Verification |
| Power Off* |
| Language |
| Menu options seen in TO_NORM screen: |
| Confirm Enabling Verified Boot |
| Cancel |
| Power off* |
| Language |
| Vol up button selects previous item, vol down button selects |
| next item and pwr button selects current activated item. |
| """ |
| self._disable_rec_mode_and_reboot() |
| self.wait_for_client_offline() |
| self.bypasser.trigger_dev_to_normal() |
| |
| |
| class _RyuSwitcher(_BaseModeSwitcher): |
| """Class that switches firmware mode via physical button.""" |
| |
| FASTBOOT_OEM_DELAY = 10 |
| RECOVERY_TIMEOUT = 2400 |
| RECOVERY_SETUP = 60 |
| ANDROID_BOOTUP = 600 |
| FWTOOL_STARTUP_DELAY = 30 |
| |
| def wait_for_client(self, timeout=180): |
| """Wait for the client to come back online. |
| |
| New remote processes will be launched if their used flags are enabled. |
| |
| @param timeout: Time in seconds to wait for the client SSH daemon to |
| come up. |
| @raise ConnectionError: Failed to connect DUT. |
| """ |
| if not self.faft_client.system.wait_for_client(timeout): |
| raise ConnectionError() |
| |
| # there's a conflict between fwtool and crossystem trying to access |
| # the nvram after the OS boots up. Temporarily put a hard wait of |
| # 30 seconds to try to wait for fwtool to finish up. |
| time.sleep(self.FWTOOL_STARTUP_DELAY) |
| |
| |
| def wait_for_client_offline(self, timeout=60, orig_boot_id=None): |
| """Wait for the client to come offline. |
| |
| @param timeout: Time in seconds to wait the client to come offline. |
| @param orig_boot_id: A string containing the original boot id. |
| @raise ConnectionError: Failed to wait DUT offline. |
| """ |
| # TODO: Add a way to check orig_boot_id |
| if not self.faft_client.system.wait_for_client_offline(timeout): |
| raise ConnectionError() |
| |
| def print_recovery_warning(self): |
| """Print recovery warning""" |
| logging.info("***") |
| logging.info("*** Entering recovery mode. This may take awhile ***") |
| logging.info("***") |
| # wait a minute for DUT to get settled into wipe stage |
| time.sleep(self.RECOVERY_SETUP) |
| |
| def is_fastboot_mode(self): |
| """Return True if DUT in fastboot mode, False otherwise""" |
| result = self.faft_client.host.run_shell_command_get_output( |
| 'fastboot devices') |
| if not result: |
| return False |
| else: |
| return True |
| |
| def wait_for_client_fastboot(self, timeout=30): |
| """Wait for the client to come online in fastboot mode |
| |
| @param timeout: Time in seconds to wait the client |
| @raise ConnectionError: Failed to wait DUT offline. |
| """ |
| utils.wait_for_value(self.is_fastboot_mode, True, timeout_sec=timeout) |
| |
| def _run_cmd(self, args): |
| """Wrapper for run_shell_command |
| |
| For Process creation |
| """ |
| return self.faft_client.host.run_shell_command(args) |
| |
| def _enable_dev_mode_and_reboot(self): |
| """Switch to developer mode and reboot.""" |
| logging.info("Entering RyuSwitcher: _enable_dev_mode_and_reboot") |
| try: |
| self.faft_client.system.run_shell_command('reboot bootloader') |
| self.wait_for_client_fastboot() |
| |
| process = Process( |
| target=self._run_cmd, |
| args=('fastboot oem unlock',)) |
| process.start() |
| |
| # need a slight delay to give the ap time to get into valid state |
| time.sleep(self.FASTBOOT_OEM_DELAY) |
| self.servo.power_key(self.faft_config.hold_pwr_button_poweron) |
| process.join() |
| |
| self.print_recovery_warning() |
| self.wait_for_client_fastboot(self.RECOVERY_TIMEOUT) |
| self.faft_client.host.run_shell_command('fastboot continue') |
| self.wait_for_client(self.ANDROID_BOOTUP) |
| |
| # need to reset DUT into clean state |
| except shell_wrapper.ShellError: |
| raise error.TestError('Error executing shell command') |
| except ConnectionError: |
| raise error.TestError('Timed out waiting for DUT to exit recovery') |
| except: |
| raise error.TestError('Unexpected Exception: %s' % sys.exc_info()[0]) |
| logging.info("Exiting RyuSwitcher: _enable_dev_mode_and_reboot") |
| |
| def _enable_normal_mode_and_reboot(self): |
| """Switch to normal mode and reboot.""" |
| try: |
| self.faft_client.system.run_shell_command('reboot bootloader') |
| self.wait_for_client_fastboot() |
| |
| process = Process( |
| target=self._run_cmd, |
| args=('fastboot oem lock',)) |
| process.start() |
| |
| # need a slight delay to give the ap time to get into valid state |
| time.sleep(self.FASTBOOT_OEM_DELAY) |
| self.servo.power_key(self.faft_config.hold_pwr_button_poweron) |
| process.join() |
| |
| self.print_recovery_warning() |
| self.wait_for_client_fastboot(self.RECOVERY_TIMEOUT) |
| self.faft_client.host.run_shell_command('fastboot continue') |
| self.wait_for_client(self.ANDROID_BOOTUP) |
| |
| # need to reset DUT into clean state |
| except shell_wrapper.ShellError: |
| raise error.TestError('Error executing shell command') |
| except ConnectionError: |
| raise error.TestError('Timed out waiting for DUT to exit recovery') |
| except: |
| raise error.TestError('Unexpected Exception: %s' % sys.exc_info()[0]) |
| logging.info("Exiting RyuSwitcher: _enable_normal_mode_and_reboot") |
| |
| def create_mode_switcher(faft_framework): |
| """Creates a proper mode switcher. |
| |
| @param faft_framework: The main FAFT framework object. |
| """ |
| switcher_type = faft_framework.faft_config.mode_switcher_type |
| if switcher_type == 'physical_button_switcher': |
| logging.info('Create a PhysicalButtonSwitcher') |
| return _PhysicalButtonSwitcher(faft_framework) |
| elif switcher_type == 'keyboard_dev_switcher': |
| logging.info('Create a KeyboardDevSwitcher') |
| return _KeyboardDevSwitcher(faft_framework) |
| elif switcher_type == 'jetstream_switcher': |
| logging.info('Create a JetstreamSwitcher') |
| return _JetstreamSwitcher(faft_framework) |
| elif switcher_type == 'ryu_switcher': |
| logging.info('Create a RyuSwitcher') |
| return _RyuSwitcher(faft_framework) |
| elif switcher_type == 'tablet_detachable_switcher': |
| logging.info('Create a TabletDetachableSwitcher') |
| return _TabletDetachableSwitcher(faft_framework) |
| else: |
| raise NotImplementedError('Not supported mode_switcher_type: %s', |
| switcher_type) |
