| # Copyright 2016 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| imports: |
| - "power_manager_prefs_schema.yaml" |
| |
| "$schema": http://json-schema.org/draft-04/schema# |
| typeDefs: |
| bcs-file-name: &bcs_file_name |
| type: string |
| build-only-element: true |
| description: Name of the file located in BCS under the respective bcs-overlay. |
| deprecated_string: &deprecated_string |
| type: string |
| description: A deprecated string property to be removed after migration. |
| firmware-build-target: &firmware_build_target |
| type: string |
| description: Build target that will be considered dirty when building/testing |
| locally. |
| # TODO(shapiroc): Migrate to use system-file-v2 instead |
| system-file: &system_file |
| type: object |
| properties: |
| source: |
| description: Source of the file relative to the build system. |
| type: string |
| destination: |
| description: Installation path for the file on the system image. |
| type: string |
| additionalProperties: false |
| # V2 exists because system-file targets were poorly named, so they couldn't |
| # be logically shared for build-time and run-time usage. |
| # E.g. bluetooth config we want to both install and get the path at runtime |
| system-file-v2: &system_file_v2 |
| type: object |
| properties: |
| build-path: |
| description: Source of the file relative to the build system. |
| build-only-element: true |
| type: string |
| system-path: |
| description: Installation path for the file on the system image. |
| type: string |
| additionalProperties: false |
| required: |
| - build-path |
| - system-path |
| firmware-file: &firmware_file |
| type: object |
| properties: |
| source: |
| description: Source of the file relative to the build system ${FILESDIR} |
| type: string |
| destination: |
| description: Installation path for the file on the system image. |
| type: string |
| symlink: |
| description: Symlink file that will be installed pointing to the destination. |
| type: string |
| additionalProperties: false |
| sku-id: &sku_id |
| description: SKU/Board strapping pins configured during board manufacturing. |
| Leaving this value unset will cause the config to match any SKU ID. |
| type: integer |
| minimum: -1 |
| maximum: 0x7FFFFFFF |
| whitelabel-tag: &whitelabel_tag |
| description: "'whitelabel_tag' value set in the VPD, to add Whitelabel branding over an unbranded base model." |
| type: string |
| customization-id: &customization_id |
| description: "'customization_id' value set in the VPD for non-unibuild Zergs and Whitelabels. Deprecated for use in new products since 2017/07/26." |
| type: string |
| platform-name: &platform_name |
| description: "Defines the name of the mosys platform used. Mosys is the only software which is allowed to used this value." |
| type: string |
| stylus-category: &stylus-category |
| description: "Denotes the category of stylus this device contains." |
| type: string |
| enum: |
| - none |
| - internal |
| - external |
| psu-type: &psu-type |
| description: | |
| Type of PSU the device has: |
| - battery: the device has a battery intended for primary use |
| - AC_primary: the device has a battery, but it is not intended for primary use |
| - AC_only: the device has no battery |
| - no_power: the device does not receive power in any direct manner (e.g., it is virtualized) |
| type: string |
| enum: |
| - battery |
| - AC_primary |
| - AC_only |
| - no_power |
| display-type: &display-type |
| description: "Denotes the type of display this device contains." |
| type: string |
| enum: |
| - default |
| - old |
| ath10k-wifi-transmit-power-chain: &ath10k-wifi-transmit-power-chain |
| description: "[ath10k] WiFi power chain for use with QCA ath10k drivers. Limits |
| in units of 1 dBm. 5g band power limit applies to all 5g bands." |
| type: object |
| properties: |
| limit-2g: |
| description: "2G band power limit (dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| limit-5g: |
| description: "5G band power limit (dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| additionalProperties: false |
| rtw-wifi-transmit-power-chain: &rtw-wifi-transmit-power-chain |
| description: "[rtw] WiFi power chain for use with Realtek rtw88 drivers. Limits |
| in units of 0.125 dBm. 5g band 2 (channels 5.35G-5.47G) power limit is not supported." |
| type: object |
| properties: |
| limit-2g: |
| description: "2G band power limit: All 2G band channels. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| limit-5g-1: |
| description: "5G band 1 power limit: 5.15G-5.35G channels. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| limit-5g-3: |
| description: "5G band 3 power limit: 5.47G-5.725G channels. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| limit-5g-4: |
| description: "5G band 4 power limit: 5.725G-5.95G channels. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| additionalProperties: false |
| wifi-geo-offsets: &wifi-geo-offsets |
| description: "Offsets which are applied to WiFi power limits depending on the |
| current regulatory domain. Offsets in units of 0.125 dBm. The sum of a geo |
| offset and any power limit to which it applies cannot exceed 255. |
| When the current regulatory domain is unknown or has yet to be determined, |
| the base transmit power limits are used without any geo offsets applied. |
| 'geo-offsets-fcc' is used for regulatory domains which follow FCC guidelines, |
| 'geo-offsets-eu' is used for regulatory domains which follow ETSI guidelines, and |
| 'geo-offsets-rest-of-world' is used for regulatory domains which don't follow |
| FCC or ETSI guidelines." |
| type: object |
| properties: |
| offset-2g: |
| description: "Value to be added to the 2.4GHz WiFi band. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| offset-5g: |
| description: "Value to be added to all 5GHz WiFi bands. (0.125 dBm)" |
| type: integer |
| minimum: 0x0 |
| maximum: 0xFF |
| additionalProperties: false |
| type: object |
| properties: |
| chromeos: |
| type: object |
| properties: |
| configs: |
| type: array |
| items: |
| type: object |
| properties: |
| arc: |
| type: object |
| required: |
| - build-properties |
| properties: |
| build-properties: |
| type: object |
| required: |
| - first-api-level |
| - product |
| - device |
| - metrics-tag |
| properties: |
| product: |
| description: Product name to report in 'ro.product.name'. |
| This may be the device name, or it can be something else, to allow |
| several devices to be grouped into one product. |
| type: string |
| device: |
| description: Device name to report in 'ro.product.device'. This |
| is often '{product}_cheets' but it can be something else if |
| desired. |
| type: string |
| oem: |
| description: Original Equipment Manufacturer for this model. This |
| generally means the OEM name printed on the device. |
| type: string |
| marketing-name: |
| description: Name of this model as it is called in the |
| market, reported in 'ro.product.model'. This often starts |
| with '{oem}'. |
| type: string |
| metrics-tag: |
| description: Tag to use to track metrics for this model. |
| The tag can be shared across many devices if desired, but |
| this will result in larger granularity for metrics |
| reporting. Ideally the metrics system should support |
| collation of metrics with different tags into groups, but if |
| this is not supported, this tag can be used to achieve the |
| same end. This is reported in 'ro.product.metrics.tag'. |
| type: string |
| first-api-level: |
| description: | |
| The first Android API level that this model shipped with. |
| type: string |
| pai-regions: |
| description: | |
| (Optional) Comma-separated allow list of region codes |
| that can be appended to 'ro.oem.key1' for the purpose of |
| targeting Play Auto Install applications by region. The |
| value(s) should match the values that would be returned |
| by `cros_region_data region_code` for the relevant |
| region(s). If the device's region code is not in the |
| allow list, or if there is no allow list, 'ro.oem.key1' |
| will not include the region code. The allow list can |
| also be a single '*' character to indicate that the |
| region code should always be appended. |
| type: string |
| pattern: "(^([a-zA-Z0-9\\.\\-]+,)*[a-zA-Z0-9\\.\\-]+$)|(^\\*$)" |
| additionalProperties: false |
| hardware-features: |
| <<: *system_file_v2 |
| description: | |
| Defines hardware_features.xml file provided to ARC during |
| initialization. |
| media-profiles: |
| <<: *system_file_v2 |
| description: | |
| Defines media_profiles.xml file provided to ARC during |
| initialization. |
| scale: |
| type: integer |
| description: The screen density value in dpi that will be used |
| for ARC apps. This value should be from the list of DPIs in |
| android cdd. |
| enum: |
| - 280 |
| camera-characteristics: |
| <<: *system_file_v2 |
| description: | |
| Defines camera_chacteristics.conf file provided to ARC |
| during initialization. |
| additionalProperties: false |
| nnpalm: |
| type: object |
| properties: |
| touch-compatible: |
| description: Optional - false by default but should be true for compatible devices. |
| type: boolean |
| radius-polynomial: |
| description: Optional - empty by default. |
| type: string |
| additionalProperties: false |
| audio: |
| type: object |
| properties: |
| main: |
| type: object |
| properties: |
| cras-config-dir: |
| description: Subdirectory for model-specific configuration. |
| type: string |
| disable-profile: |
| description: Optional --disable_profile parameter for CRAS deamon. |
| type: string |
| ucm-suffix: |
| description: Optional UCM suffix used to determine model specific |
| config. |
| type: string |
| files: |
| type: array |
| build-only-element: true |
| items: *system_file |
| additionalProperties: false |
| required: |
| - cras-config-dir |
| additionalProperties: false |
| required: |
| - main |
| bluetooth: |
| type: object |
| properties: |
| # TODO(b:152526402) - Remove when no yaml references "config". |
| config: *system_file_v2 |
| flags: |
| type: object |
| properties: |
| enable-suspend-management: |
| description: Enable powerd suspend management callbacks. |
| type: boolean |
| # TODO(abhishekpandit) - Remove once no longer used |
| stop-on-suspend: |
| description: Stop the bluetooth adapter on suspend and start it on resume. |
| type: boolean |
| reset-on-resume: |
| description: Expect bluetooth chip to have reset on resume. |
| type: boolean |
| additionalProperties: false |
| additionalProperties: false |
| wifi: |
| type: object |
| description: Sets limits on maximum WiFi transmit power for tablet and non-tablet |
| device configurations. This config must contain properties for ath10k wifi driver |
| or rtw88 wifi driver only. |
| oneOf: |
| - properties: |
| tablet-mode-power-table-ath10k: *ath10k-wifi-transmit-power-chain |
| non-tablet-mode-power-table-ath10k: *ath10k-wifi-transmit-power-chain |
| additionalProperties: false |
| - properties: |
| tablet-mode-power-table-rtw: *rtw-wifi-transmit-power-chain |
| non-tablet-mode-power-table-rtw: *rtw-wifi-transmit-power-chain |
| geo-offsets-fcc: *wifi-geo-offsets |
| geo-offsets-eu: *wifi-geo-offsets |
| geo-offsets-rest-of-world: *wifi-geo-offsets |
| additionalProperties: false |
| brand-code: |
| description: Brand code of the model (also called RLZ code). |
| type: string |
| camera: |
| type: object |
| properties: |
| count: |
| type: integer |
| description: Specified the number of cameras on the model. |
| config-file: |
| <<: *system_file_v2 |
| description: Defines the camera configuration file. |
| clock: |
| type: string |
| description: Specified the camera clock on the model. |
| enum: |
| - monotonic |
| - boottime |
| legacy-usb: |
| type: boolean |
| description: Indicates if the device has legacy usb cameras. |
| zsl-lookback: |
| type: integer |
| description: Specifies the duration to look back for |
| Zero-Shutter Lag (ZSL) in milliseconds. |
| additionalProperties: false |
| fingerprint: |
| type: object |
| description: Contains details about the model's fingerprint implementation. |
| properties: |
| board: |
| type: string |
| description: Specifies the fingerprint board in use. |
| sensor-location: |
| description: Specifies the location of the fingerprint sensor. |
| type: string |
| enum: |
| - none # Explicitly not supported. |
| - power-button-top-left |
| - keyboard-bottom-left |
| - keyboard-bottom-right |
| - keyboard-top-right |
| - power-button-side-right |
| fingerprint-sensor-type: |
| description: Type of FP sensor. Currently describes whether FP |
| is overlapped on the power button or not. |
| type: string |
| enum: |
| - stand-alone |
| - on-power-button |
| ro-version: |
| description: RO version for the fingerprint firmware for the |
| FPMCU specified by the "board" property. If not specified, |
| the default RO version for the FPMCU is used. |
| type: string |
| build-only-element: true |
| additionalProperties: false |
| dependencies: |
| ro-version: |
| - board |
| firmware: |
| type: object |
| properties: |
| bcs-overlay: |
| description: BCS overlay path used to determine BCS file path for binary |
| firmware downloads. |
| type: string |
| build-only-element: true |
| build-targets: |
| type: object |
| build-only-element: true |
| properties: |
| base: |
| description: Build target of the base EC firmware for a detachable device, |
| that will be considered dirty when building/testing |
| type: string |
| ec_extras: |
| type: array |
| items: |
| type: string |
| description: Extra EC build targets to build within chromeos-ec. |
| coreboot: *firmware_build_target |
| gsc: *firmware_build_target |
| depthcharge: *firmware_build_target |
| ec: *firmware_build_target |
| ish: *firmware_build_target |
| libpayload: *firmware_build_target |
| u-boot: *firmware_build_target |
| zephyr-ec: |
| type: string |
| description: Specifies the list of Zephyr-based firmware |
| targets to build. |
| additionalProperties: false |
| ec-ro-image: *bcs_file_name |
| pd-ro-image: *bcs_file_name |
| key-id: |
| description: Key ID from the signer key set that is used to sign the |
| given firmware image. |
| type: string |
| build-only-element: true |
| main-ro-image: *bcs_file_name |
| main-rw-image: *bcs_file_name |
| name: |
| description: This is a human-recognizable name used to refer to the firmware. |
| It will be used when generating the shellball via firmware packer. |
| Mainly, this is only for compatibility testing with device tree (since DT |
| allowed firmwares to be named). |
| type: string |
| build-only-element: true |
| image-name: |
| description: The name of the firmware image used by the |
| firmware updater. Typically the device name, but can differ |
| when a device may have two or more different firmware |
| images. |
| type: string |
| build-only-element: false |
| no-firmware: |
| description: Does nothing and pending removal. Do not set. |
| ([Bug](https://crbug.com/1072007)) |
| type: boolean |
| build-only-element: true |
| firmware-config: |
| description: The firmware config bitmap to be flashed to the CBI. This field is |
| used in the factory. |
| type: integer |
| build-only-element: false |
| additionalProperties: false |
| firmware-signing: |
| type: object |
| build-only-element: true |
| properties: |
| key-id: |
| description: Key ID from the signer key set that is used to sign the |
| given firmware image. |
| type: string |
| signature-id: |
| description: ID used to generate keys/keyblocks in the firmware |
| signing output. |
| type: string |
| sig-id-in-customization-id: |
| description: Indicates that this model cannot be decoded by the mapping table. |
| Instead the model is stored in the VPD (Vital Product Data) region in the |
| customization_id property. This allows us to determine the |
| model to use in the factory during the finalization stage. Note |
| that if the VPD is wiped then the model will be lost. This may |
| mean that the device will revert back to a generic model, or |
| may not work. It is not possible in general to test whether the |
| model in the VPD is correct at run-time. We simply assume that |
| it is. The advantage of using this property is that no hardware |
| changes are needed to change one model into another. For example |
| we can create 20 different whitelabel boards, all with the same |
| hardware, just by changing the customization_id that is written |
| into SPI flash. |
| type: boolean |
| required: |
| - key-id |
| - signature-id |
| additionalProperties: false |
| detachable-base: |
| type: object |
| description: "Contains the configuration for the hammerd which |
| is used to update the detachable base firmware." |
| properties: |
| ec-image-name: |
| description: "The target EC binary name which is placed under |
| /lib/firmware." |
| type: string |
| touch-image-name: |
| description: "The touchpad binary name which is placed under |
| /lib/firmware. This is only needed if the detachable base |
| contains touchpad." |
| type: string |
| vendor-id: |
| description: "The Vendor ID of the detachable base. This |
| value can be queried by command 'lsusb'. |
| By taking this as an example: |
| Bus 001 Device 032: ID 18d1:503c Google Inc. |
| the vendor-id is 6353(=0x18d1)." |
| type: integer |
| product-id: |
| description: "The Product ID of the detachable base. This |
| value can be queried by command 'lsusb'. |
| By taking this as an example: |
| Bus 001 Device 032: ID 18d1:503c Google Inc. |
| the product-id is 20540(=0x503c)." |
| type: integer |
| usb-path: |
| description: "Searches and finds the idVendor and idProduct |
| under sysfs /sys/bus/usb/devices/* which matches the |
| vendor-id and product-id. By taking this as an example: |
| '/sys/bus/usb/devices/1-1.1' |
| The usb-path is '1-1.1'." |
| type: string |
| files: |
| type: array |
| build-only-element: true |
| items: *firmware_file |
| additionalProperties: false |
| identity: |
| type: object |
| description: Defines attributes that are used by cros_config to detect the identity |
| of the platform and which corresponding config should be used. |
| This tuple must either contain x86 properties only or ARM properties only. |
| anyOf: |
| - properties: |
| smbios-name-match: |
| description: "[x86] Firmware name built into the firmware and reflected back |
| out in the SMBIOS tables. Leaving this value unset will cause the config |
| to match any SMBIOS product name." |
| type: string |
| sku-id: *sku_id |
| platform-name: *platform_name |
| customization-id: *customization_id |
| whitelabel-tag: *whitelabel_tag |
| additionalProperties: false |
| - properties: |
| device-tree-compatible-match: |
| description: "[ARM] String pattern (partial) that is matched against the |
| contents of /proc/device-tree/compatible on ARM devices." |
| type: string |
| sku-id: *sku_id |
| platform-name: *platform_name |
| whitelabel-tag: *whitelabel_tag |
| additionalProperties: false |
| name: |
| type: string |
| pattern: "^[_a-zA-Z0-9]{3,}" |
| description: Google code name for the given model. While it is OK to use this string |
| for human-display purposes (such as in a debug log or help dialog), or for a |
| searchable-key in metrics collection, it is not recommended to use this property |
| for creating model-specific behaviors. In this case, add a property to the schema |
| which describes your behavior and use that instead. |
| power: |
| description: Defines settings that control power management functions. |
| This mostly defines power_manager preferences, but but there are a few |
| other power related settings included. |
| For details about each power_manager preference, see - |
| src/platform2/power_manager/common/power_constants.h/cc |
| For examples on setting these properties (including multiline examples), see |
| the power config example in libcros_config/test.yaml |
| type: object |
| properties: |
| <<: *powerd_prefs |
| allow-ambient-eq: |
| description: Enable (1) or disable (0) Ambient EQ. |
| type: string |
| pattern: "^[01]$" |
| autobrightness: |
| type: object |
| properties: |
| config-file: *system_file_v2 |
| additionalProperties: false |
| required: |
| - config-file |
| touchpad-wakeup: |
| description: Enable (1) or disable (0) wake from touchpad. |
| type: string |
| pattern: "^[01]$" |
| additionalProperties: false |
| test-label: |
| description: Test alias (model) label that will be applied in Autotest and |
| reported for test results. |
| type: string |
| thermal: |
| type: object |
| properties: |
| dptf-dv: |
| description: System image path to the .dv file containing DPTF (Dynamic Platform |
| and Thermal Framework) settings. |
| type: string |
| files: |
| type: array |
| build-only-element: true |
| items: *system_file |
| additionalProperties: false |
| required: |
| - files |
| touch: |
| type: object |
| properties: |
| files: |
| type: array |
| build-only-element: true |
| items: *firmware_file |
| additionalProperties: false |
| wallpaper: |
| description: Base filename of the default wallpaper to show on this device. |
| type: string |
| demo-mode: |
| type: object |
| description: Properties related to the ChromeOS Demo Mode, defining the user |
| experience when the device is used in retail. |
| additionalProperties: false |
| properties: |
| highlights-extension-id: |
| description: The Chrome extension ID of the highlights app used during demo mode. |
| type: string |
| screensaver-extension-id: |
| description: The Chrome extension ID of the attract loop played during demo mode. |
| type: string |
| regulatory-label: |
| description: Base name of the directory containing the regulatory label |
| files to show on this device. |
| type: string |
| ui: |
| type: object |
| properties: |
| power-button: |
| type: object |
| properties: |
| edge: |
| type: string |
| enum: |
| - left |
| - right |
| - top |
| - bottom |
| position: |
| type: string |
| additionalProperties: false |
| side-volume-button: |
| description: Defines the position of the side volume button. `region` indicates |
| whether the button is at the side of the "screen" or "keyboard" of the device. |
| `side` indicates which edge the button is anchored to while the device in |
| landscape primary screen orientation. It can be "left", "right", "top", |
| "bottom". |
| type: object |
| properties: |
| region: |
| type: string |
| enum: |
| - keyboard |
| - screen |
| side: |
| type: string |
| enum: |
| - left |
| - right |
| - top |
| - bottom |
| additionalProperties: false |
| extra-ash-flags: |
| type: array |
| build-only-element: true |
| items: |
| type: string |
| pattern: "^--[a-zA-Z][a-zA-Z-]*(=.+)?$" |
| description: Flags passed to the Ash window manager and |
| system UI. Each entry should be a string of the form |
| --<key>=<value>, or --<key> for boolean flags. If this |
| property is not set, flags will be determined by other |
| cros_config properties. Serialized to a null byte |
| separated string when written to configfs.img |
| help-content-id: |
| description: Identifier passed to the Showoff app to identify |
| any device-specific help content to be displayed. |
| type: string |
| additionalProperties: false |
| auto-night-light: |
| description: Whether the auto-night-light feature is enabled on the device, which |
| sets the schedule for Night light automatically to sunset-to-sunrise. |
| type: boolean |
| oem-id: |
| description: | |
| Some projects store SKU ID, OEM ID and Board Revision in an |
| EEPROM and only SKU ID can be updated in the factory and RMA |
| flow but others should be pre-flashed in the chip level. In |
| this case, we would like to validate whether oem-id here from |
| the updated SKU ID matches the one in the EEPROM so we can |
| prevent this device from being updated to another OEM's devices. |
| type: string |
| pattern: "[0-9]+" |
| modem: |
| type: object |
| properties: |
| firmware-variant: |
| description: Variant of the modem firmware to be used. This |
| value is read by modemfwd to match against the variant field |
| of a firmware entry in a firmware manifest. In most cases, |
| we simply use the model name as the value. |
| type: string |
| additionalProperties: false |
| cross-device: |
| type: object |
| description: Contains properties to configure cross-device features |
| between ChromeOS devices and other devices, such as Instant |
| Tethering and Smart Lock. |
| properties: |
| instant-tethering: |
| type: object |
| description: Contains properties to configure the Instant Tethering |
| cross-device feature. |
| properties: |
| disable-instant-tethering: |
| description: Disables the Instant Tethering feature. |
| false by default |
| type: boolean |
| additionalProperties: false |
| additionalProperties: false |
| hardware-properties: |
| type: object |
| description: Contains boolean flags or enums for hardware properties |
| of this board, for example if it's convertible, has a touchscreen, |
| has a camera, etc. This information is used to auto-generate C |
| code that is consumed by the EC build process in order to do |
| run-time configuration. If a value is defined within a config |
| file, but not for a specific model, that value will be assumed |
| to be false for that model. If a value is an enum and is not |
| specified for a specific model, it will default to "none". |
| All properties must be booleans or enums. If non-boolean |
| properties are desired, the generation code in |
| cros_config_schema.py must be updated to support them. |
| properties: |
| is-lid-convertible: |
| description: Can the lid be rotated 360 degrees. |
| type: boolean |
| has-lid-accelerometer: |
| description: Is there an accelerometer in the lid of the |
| device. |
| type: boolean |
| has-base-accelerometer: |
| description: Is there an accelerometer in the base of the |
| device. |
| type: boolean |
| has-lid-gyroscope: |
| description: Is there a gyroscope in the lid of the device. |
| type: boolean |
| has-base-gyroscope: |
| description: Is there a gyroscope in the base of the device. |
| type: boolean |
| has-lid-magnetometer: |
| description: Is there a magnetometer in the lid of the device. |
| type: boolean |
| has-base-magnetometer: |
| description: Is there a magnetometer in the base of the device. |
| type: boolean |
| has-base-light-sensor: |
| description: Is there a light sensor in the base of the device. |
| type: boolean |
| has-lid-light-sensor: |
| description: Is there a light sensor in the lid of the device. |
| type: boolean |
| has-touchscreen: |
| description: Does the device have a touchscreen. |
| type: boolean |
| display-type: *display-type |
| stylus-category: *stylus-category |
| psu-type: *psu-type |
| additionalProperties: false |
| cros-healthd: |
| type: object |
| description: Contains properties used by cros_healthd for |
| model-specific telemetry. Each property represents a category of |
| information and contains boolean properties that indicate |
| whether a device supports a particular telemetry item. See |
| cros_healthd_probe.mojom for descriptions of each property. |
| properties: |
| backlight: |
| type: object |
| properties: |
| has-backlight: |
| type: boolean |
| additionalProperties: false |
| battery: |
| type: object |
| properties: |
| has-smart-battery-info: |
| type: boolean |
| additionalProperties: false |
| cached-vpd: |
| type: object |
| properties: |
| has-sku-number: |
| type: boolean |
| additionalProperties: false |
| additionalProperties: false |
| additionalProperties: false |
| required: |
| - name |
| additionalProperties: false |
| required: |
| - configs |