| $ hdparm -I /dev/sda |
| |
| /dev/sda: |
| |
| ATA device, with non-removable media |
| Model Number: TS128GMTS400 |
| Serial Number: B825770027 |
| Firmware Revision: N0815B |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 |
| Standards: |
| Supported: 9 8 7 6 5 |
| Likely used: 9 |
| Configuration: |
| Logical max current |
| cylinders 16383 16383 |
| heads 16 16 |
| sectors/track 63 63 |
| -- |
| CHS current addressable sectors: 16514064 |
| LBA user addressable sectors: 250069680 |
| LBA48 user addressable sectors: 250069680 |
| Logical Sector size: 512 bytes |
| Physical Sector size: 512 bytes |
| Logical Sector-0 offset: 0 bytes |
| device size with M = 1024*1024: 122104 MBytes |
| device size with M = 1000*1000: 128035 MBytes (128 GB) |
| cache/buffer size = unknown |
| Nominal Media Rotation Rate: Solid State Device |
| Capabilities: |
| LBA, IORDY(can be disabled) |
| Queue depth: 32 |
| Standby timer values: spec'd by Standard, no device specific minimum |
| R/W multiple sector transfer: Max = 2 Current = 1 |
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 |
| Cycle time: min=120ns recommended=120ns |
| PIO: pio0 pio1 pio2 pio3 pio4 |
| Cycle time: no flow control=120ns IORDY flow control=120ns |
| Commands/features: |
| Enabled Supported: |
| * SMART feature set |
| Security Mode feature set |
| * Power Management feature set |
| * Write cache |
| * Look-ahead |
| * Host Protected Area feature set |
| * WRITE_BUFFER command |
| * READ_BUFFER command |
| * NOP cmd |
| * DOWNLOAD_MICROCODE |
| SET_MAX security extension |
| Automatic Acoustic Management feature set |
| * 48-bit Address feature set |
| * Mandatory FLUSH_CACHE |
| * FLUSH_CACHE_EXT |
| * SMART error logging |
| * SMART self-test |
| * General Purpose Logging feature set |
| * WRITE_{DMA|MULTIPLE}_FUA_EXT |
| * {READ,WRITE}_DMA_EXT_GPL commands |
| * Segmented DOWNLOAD_MICROCODE |
| * Gen1 signaling speed (1.5Gb/s) |
| * Gen2 signaling speed (3.0Gb/s) |
| * Gen3 signaling speed (6.0Gb/s) |
| * Native Command Queueing (NCQ) |
| * Host-initiated interface power management |
| * unknown 76[15] |
| * DMA Setup Auto-Activate optimization |
| * Software settings preservation |
| unknown 78[8] |
| * DOWNLOAD MICROCODE DMA command |
| * WRITE BUFFER DMA command |
| * READ BUFFER DMA command |
| * Data Set Management TRIM supported (limit 8 blocks) |
| * Deterministic read ZEROs after TRIM |
| Security: |
| Master password revision code = 65534 |
| supported |
| not enabled |
| not locked |
| not frozen |
| not expired: security count |
| supported: enhanced erase |
| 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. |
| Checksum: correct |
| |
| $ smartctl -x /dev/sda |
| smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.14.0] (local build) |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
| |
| === START OF INFORMATION SECTION === |
| Device Model: TS128GMTS400 |
| Serial Number: B825770027 |
| Firmware Version: N0815B |
| User Capacity: 128,035,676,160 bytes [128 GB] |
| Sector Size: 512 bytes logical/physical |
| Rotation Rate: Solid State Device |
| Device is: Not in smartctl database [for details use: -P showall] |
| ATA Version is: ACS-2 (minor revision not indicated) |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
| Local Time is: Fri Sep 15 18:44:02 2017 PDT |
| SMART support is: Available - device has SMART capability. |
| SMART support is: Enabled |
| AAM feature is: Disabled |
| APM feature is: Unavailable |
| Rd look-ahead is: Enabled |
| Write cache is: Enabled |
| ATA Security is: Disabled, NOT FROZEN [SEC1] |
| Wt Cache Reorder: Unavailable |
| |
| === START OF READ SMART DATA SECTION === |
| SMART overall-health self-assessment test result: PASSED |
| |
| General SMART Values: |
| Offline data collection status: (0x00) Offline data collection activity |
| was never started. |
| Auto Offline Data Collection: Disabled. |
| Self-test execution status: ( 0) The previous self-test routine completed |
| without error or no self-test has ever |
| been run. |
| Total time to complete Offline |
| data collection: ( 0) seconds. |
| Offline data collection |
| capabilities: (0x71) SMART execute Offline immediate. |
| No Auto Offline data collection support. |
| Suspend Offline collection upon new |
| command. |
| No Offline surface scan supported. |
| Self-test supported. |
| Conveyance Self-test supported. |
| Selective Self-test supported. |
| SMART capabilities: (0x0002) Does not save SMART data before |
| entering power-saving mode. |
| Supports SMART auto save timer. |
| Error logging capability: (0x01) Error logging supported. |
| General Purpose Logging supported. |
| Short self-test routine |
| recommended polling time: ( 2) minutes. |
| Extended self-test routine |
| recommended polling time: ( 10) minutes. |
| Conveyance self-test routine |
| recommended polling time: ( 2) minutes. |
| |
| SMART Attributes Data Structure revision number: 1 |
| Vendor Specific SMART Attributes with Thresholds: |
| ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
| 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 |
| 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 |
| 9 Power_On_Hours ------ 100 100 000 - 9969 |
| 12 Power_Cycle_Count ------ 100 100 000 - 32 |
| 160 Unknown_Attribute ------ 100 100 000 - 0 |
| 161 Unknown_Attribute ------ 100 100 000 - 27 |
| 163 Unknown_Attribute ------ 100 100 000 - 19 |
| 164 Unknown_Attribute ------ 100 100 000 - 67033 |
| 165 Unknown_Attribute ------ 100 100 000 - 129 |
| 166 Unknown_Attribute ------ 100 100 000 - 28 |
| 167 Unknown_Attribute ------ 100 100 000 - 67 |
| 168 Unknown_Attribute ------ 100 100 000 - 3000 |
| 169 Unknown_Attribute ------ 100 100 000 - 100 |
| 177 Wear_Leveling_Count ------ 100 100 050 - 163 |
| 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 |
| 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 |
| 192 Power-Off_Retract_Count ------ 100 100 000 - 7 |
| 194 Temperature_Celsius ------ 100 100 000 - 64 |
| 195 Hardware_ECC_Recovered ------ 100 100 000 - 20 |
| 196 Reallocated_Event_Count ------ 100 100 016 - 0 |
| 197 Current_Pending_Sector ------ 100 100 000 - 0 |
| 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 |
| 232 Available_Reservd_Space ------ 100 100 000 - 100 |
| 241 Total_LBAs_Written ------ 100 100 000 - 164174 |
| 242 Total_LBAs_Read ------ 100 100 000 - 50938 |
| 245 Unknown_Attribute ------ 100 100 000 - 268132 |
| ||||||_ K auto-keep |
| |||||__ C event count |
| ||||___ R error rate |
| |||____ S speed/performance |
| ||_____ O updated online |
| |______ P prefailure warning |
| |
| General Purpose Log Directory Version 1 |
| SMART Log Directory Version 1 [multi-sector log support] |
| Address Access R/W Size Description |
| 0x00 GPL,SL R/O 1 Log Directory |
| 0x01 GPL,SL R/O 1 Summary SMART error log |
| 0x02 GPL,SL R/O 1 Comprehensive SMART error log |
| 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log |
| 0x04 GPL,SL R/O 8 Device Statistics log |
| 0x06 GPL,SL R/O 1 SMART self-test log |
| 0x07 GPL,SL R/O 1 Extended self-test log |
| 0x09 GPL,SL R/W 1 Selective self-test log |
| 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log |
| 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
| 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
| |
| SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
| No Errors Logged |
| |
| SMART Extended Self-test Log Version: 1 (1 sectors) |
| Invalid Self-test Log index = 0x3837 (reserved = 0x00) |
| SMART Selective self-test log data structure revision number 1 |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 1 0 0 Not_testing |
| 2 0 0 Not_testing |
| 3 0 0 Not_testing |
| 4 0 0 Not_testing |
| 5 0 0 Not_testing |
| Selective self-test flags (0x0): |
| After scanning selected spans, do NOT read-scan remainder of disk. |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
| |
| SCT Commands not supported |
| |
| Device Statistics (GP Log 0x04) |
| Page Offset Size Value Flags Description |
| 0x01 ===== = = === == General Statistics (rev 2) == |
| 0x01 0x008 4 32 --- Lifetime Power-On Resets |
| 0x01 0x010 4 9969 --- Power-on Hours |
| 0x01 0x018 6 2169393975 --- Logical Sectors Written |
| 0x01 0x020 6 220059545 --- Number of Write Commands |
| 0x01 0x028 6 3338302425 --- Logical Sectors Read |
| 0x01 0x030 6 47019327 --- Number of Read Commands |
| 0x02 ===== = = === == Free-Fall Statistics (empty) == |
| 0x03 ===== = = === == Rotating Media Statistics (empty) == |
| 0x04 ===== = = === == General Errors Statistics (rev 1) == |
| 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
| 0x04 0x010 4 7 --- Resets Between Cmd Acceptance and Completion |
| 0x05 ===== = = === == Temperature Statistics (empty) == |
| 0x06 ===== = = === == Transport Statistics (rev 1) == |
| 0x06 0x008 4 4569 --- Number of Hardware Resets |
| 0x06 0x018 4 0 --- Number of Interface CRC Errors |
| 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
| 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |
| |||_ C monitored condition met |
| ||__ D supports DSN |
| |___ N normalized value |
| |
| SATA Phy Event Counters (GP Log 0x11) not supported |
| |
| |
