blob: 55c3d02ae783e3eae0cf00608791e1079e05a600 [file] [log] [blame]
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
/* APIs provided by firmware to vboot_reference.
* General notes:
* All verified boot functions now start with "Vb" for namespace clarity. This
* fixes the problem where uboot and vboot both defined assert().
* Verified boot APIs to be implemented by the calling firmware and exported to
* vboot_reference start with "VbEx".
* TODO: split this file into a vboot_entry_points.h file which contains the
* entry points for the firmware to call vboot_reference, and a
* vboot_firmware_exports.h which contains the APIs to be implemented by the
* calling firmware and exported to vboot_reference.
#include <stdint.h>
#include <stdlib.h>
#include "gpt.h"
/* Error codes */
* Functions which return an error all return this type. This is a 32-bit
* value rather than an int so it's consistent across UEFI, which is 32-bit
* during PEI and 64-bit during DXE/BDS.
typedef uint32_t VbError_t;
* Define test_mockable for mocking functions.
#ifndef test_mockable
#define test_mockable __attribute__((weak))
* Predefined error numbers. Success is 0. Errors are non-zero, but differ
* between functions. For example, the TPM functions may pass through TPM
* error codes, some of which may be recoverable.
enum VbErrorPredefined_t {
/* No error; function completed successfully. */
* The verified boot entry points VbInit(), VbSelectFirmware(),
* VbSelectAndLoadKernel() may return the following errors.
/* Unknown error */
/* Unable to initialize shared data */
/* Error resuming TPM during a S3 resume */
/* VbSelectFirmware() failed to find a valid firmware */
/* Unable to write firmware versions to TPM */
/* Unable to lock firmware versions in TPM */
/* Unable to set boot mode state in TPM */
/* Calling firmware needs to perform a reboot. */
/* Unable to set up TPM */
/* Unable to read kernel versions from TPM */
/* Attempt to load developer-only firmware with developer switch off */
/* Unable to write kernel versions to TPM */
/* Unable to lock kernel versions in TPM */
/* Calling firmware requested shutdown via VbExIsShutdownRequested() */
/* Unable to find a boot device on which to look for a kernel */
/* No OS kernel found on any boot device */
/* All OS kernels found were invalid (corrupt, improperly signed...) */
/* VbSelectAndLoadKernel() requested recovery mode */
/* Other error inside VbSelectAndLoadKernel() */
/* Invalid Google binary block */
/* Invalid bitmap volume */
/* Invalid screen index */
/* Simulated (test) error */
/* Invalid parameter */
/* VbExBeep() can't make sounds at all */
/* VbExBeep() can't make sound in the background */
/* Need EC to reboot to read-only code to switch RW slot */
/* Developer has requested a BIOS shell */
/* Need VGA and don't have it, or vice-versa */
/* Need EC to reboot to read-only code */
/* Invalid region read parameters */
/* Cannot read from region */
/* Unsupported region type */
/* No image present (was returned from VbGbbReadImage(); deprecated */
/* failed to draw screen */
/* failed to jump to RW image */
/* Error reading FWMP from TPM (note: not present is not an error) */
/* Peripheral busy. Cannot upgrade firmware at present. */
/* Error reading or writing Alt OS flags to TPM */
/* VbExEcGetExpectedRWHash() may return the following codes */
/* Compute expected RW hash from the EC image; BIOS doesn't have it */
/* Detachable UI internal functions may return the following codes */
/* No error; return to UI loop */
/* Main entry points from firmware into vboot_reference */
* Minimum and recommended size of shared_data_blob in bytes. Shared data blob
* is used to communicate data between calls to VbInit(), VbSelectFirmware(),
* the OS. Minimum size is enough to hold all required data for verified boot
* but may not be able to hold debug output.
* Data passed by firmware to VbInit(), VbSelectFirmware() and
* VbSelectAndLoadKernel().
* Note that in UEFI, these are called by different phases in different
* processor modes (VbInit() and VbSelectFirmware() = 32-bit PEI,
* VbSelectAndLoadKernel() = 64-bit BDS), so the data may be at a different
* location between calls.
typedef struct VbCommonParams {
/* Pointer to GBB data */
void *gbb_data;
/* Size of GBB data in bytes */
uint32_t gbb_size;
* Shared data blob for data shared between verified boot entry points.
* This should be at least VB_SHARED_DATA_MIN_SIZE bytes long, and
* ideally is VB_SHARED_DATA_REC_SIZE bytes long.
/* Pointer to shared data blob buffer */
void *shared_data_blob;
* On input, set to size of shared data blob buffer, in bytes. On
* output, this will contain the actual data size placed into the
* buffer.
uint32_t shared_data_size;
* Internal context/data for verified boot, to maintain state during
* calls to other API functions such as VbExHashFirmwareBody().
* Allocated and freed inside the entry point; firmware should not look
* at this.
void *vboot_context;
} VbCommonParams;
/* Flags for VbExGetSwitches() */
/* Recovery button was pressed at boot time. */
/* Allow USB boot on transition to dev */
#define VB_INIT_FLAG_ALLOW_USB_BOOT 0x00004000
/* Mask of deprecated flags */
* Output flags for VbInitParams.out_flags. Used to indicate potential boot
* paths and configuration to the calling firmware early in the boot process,
* so that it can properly configure itself for the capabilities subsequently
* required by VbSelectFirmware() and VbSelectAndLoadKernel().
* Enable recovery path. Do not rely on any rewritable data (cached RAM
* timings, etc.). Reliable operation is more important than boot speed.
#define VB_INIT_OUT_ENABLE_RECOVERY 0x00000001
/* RAM must be cleared before calling VbSelectFirmware(). */
#define VB_INIT_OUT_CLEAR_RAM 0x00000002
* Load display drivers; VbExDisplay*() functions may be called. If this flag
* is not present, VbExDisplay*() functions will not be called this boot.
#define VB_INIT_OUT_ENABLE_DISPLAY 0x00000004
* Load USB storage drivers; VbExDisk*() functions may be called with the
* VB_DISK_FLAG_REMOVABLE flag. If this flag is not present, VbExDisk*()
* functions will only be called for fixed disks.
/* Enable developer path. */
/* Mask of deprecated flags */
#define VB_INIT_OUT_DEPRECATED 0x00000070
/* Data only used by VbInit() */
typedef struct VbInitParams {
uint32_t deprecated; /* Was init flags */
/* Outputs from VbInit(); valid only if it returns success. */
/* Output flags for firmware; see VB_INIT_OUT_*) */
uint32_t out_flags;
} VbInitParams;
* Firmware types for VbHashFirmwareBody() and
* VbSelectFirmwareParams.selected_firmware. Note that we store these in a
* uint32_t because enum maps to int, which isn't fixed-size.
enum VbSelectFirmware_t {
/* Read only firmware for normal or developer path. */
/* Rewritable EC firmware currently set active */
/* Rewritable EC firmware currently not set active thus updatable */
/* Keep this at the end */
* We use disk handles rather than indices. Using indices causes problems if
* a disk is removed/inserted in the middle of processing.
typedef void *VbExDiskHandle_t;
/* Data used only by VbSelectAndLoadKernel() */
typedef struct VbSelectAndLoadKernelParams {
/* Inputs to VbSelectAndLoadKernel() */
/* Destination buffer for kernel (normally at 0x100000 on x86) */
void *kernel_buffer;
/* Size of kernel buffer in bytes */
uint32_t kernel_buffer_size;
/* input flags. Currently used for detachables */
uint32_t inflags;
* Outputs from VbSelectAndLoadKernel(); valid only if it returns
* success.
/* Handle of disk containing loaded kernel */
VbExDiskHandle_t disk_handle;
/* Partition number on disk to boot (1...M) */
uint32_t partition_number;
/* Address of bootloader image in RAM */
uint64_t bootloader_address;
/* Size of bootloader image in bytes */
uint32_t bootloader_size;
/* UniquePartitionGuid for boot partition */
uint8_t partition_guid[16];
/* Flags set by signer */
uint32_t flags;
* TODO: in H2C, all that pretty much just gets passed to the
* bootloader as KernelBootloaderOptions, though the disk handle is
* passed as an index instead of a handle. Is that used anymore now
* that we're passing partition_guid?
} VbSelectAndLoadKernelParams;
/* Flag to indicate using detachable menu ui (arrow up/down+power)
* instead of traditional FW screens with ctrl+D, ctrl+U, etc.
* Select and loads the kernel.
* Returns VBERROR_SUCCESS if success, non-zero if error; on error, caller
* should reboot. */
VbError_t VbSelectAndLoadKernel(VbCommonParams *cparams,
VbSelectAndLoadKernelParams *kparams);
* Verify Kernel Image loaded in memory.
* This routine is used by fastboot boot command to verify the kernel image in
* memory sent by the host device using fastboot protocol. It checks if the
* image in memory is signed using official recovery keys. In case of GBB
* override to allow full fastboot functionality, it checks image integrity, but
* does not check the image signature.
* @param cparams Common parameters, e.g. use member caller_context
* to point to useful context data
* @param kparams kernel params
* @param boot_image Image in memory that needs to be verified
* @param image_size Size of the image in memory
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbVerifyMemoryBootImage(VbCommonParams *cparams,
VbSelectAndLoadKernelParams *kparams,
void *boot_image,
size_t image_size);
* Fastboot API to enter dev mode.
* This routine is used by fastboot oem unlock command to switch the device into
* dev mode.
* NOTE: The caller MUST be in read-only firmware, and MUST have just obtained
* explicit physical confirmation from the user via a trusted input method
* before calling this function! Also, on successful return from this function,
* the caller needs to reboot the device immediately for changes to take effect.
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbUnlockDevice(void);
/* Debug output (from utility.h) */
* Output an error message and quit. Does not return. Supports
* printf()-style formatting.
void VbExError(const char *format, ...);
* Output a debug message. Supports printf()-style formatting.
void VbExDebug(const char *format, ...)
__attribute__ ((format (__printf__, 1, 2)));
/* Timer and delay (first two from utility.h) */
* Read a microsecond timer.
* This should have a sufficient number of bits to avoid wraparound for at
* least 10 minutes. A 32-bit value would be plenty, but for historical
* reasons this returns uint64_t.
uint64_t VbExGetTimer(void);
* Delay for at least the specified number of milliseconds. Should be accurate
* to within 10% (a requested delay of 1000 ms should result in an actual delay
* of between 1000 - 1100 ms).
void VbExSleepMs(uint32_t msec);
* Play a beep tone of the specified frequency in Hz and duration in msec.
* This is effectively a VbSleep() variant that makes noise.
* If the audio codec can run in the background, then:
* zero frequency means OFF, non-zero frequency means ON
* zero msec means return immediately, non-zero msec means delay (and
* then OFF if needed)
* otherwise,
* non-zero msec and non-zero frequency means ON, delay, OFF, return
* zero msec or zero frequency means do nothing and return immediately
* The return value is used by the caller to determine the capabilities. The
* implementation should always do the best it can if it cannot fully support
* all features - for example, beeping at a fixed frequency if frequency
* support is not available. At a minimum, it must delay for the specified
* non-zero duration.
VbError_t VbExBeep(uint32_t msec, uint32_t frequency);
/* TPM (from tlcl_stub.h) */
* Initialize the stub library. */
VbError_t VbExTpmInit(void);
* Close and open the device. This is needed for running more complex commands
* at user level, such as TPM_TakeOwnership, since the TPM device can be opened
* only by one process at a time.
VbError_t VbExTpmClose(void);
VbError_t VbExTpmOpen(void);
* Send a request_length-byte request to the TPM and receive a response. On
* input, response_length is the size of the response buffer in bytes. On
* exit, response_length is set to the actual received response length in
* bytes. */
VbError_t VbExTpmSendReceive(const uint8_t *request, uint32_t request_length,
uint8_t *response, uint32_t *response_length);
* Obtain cryptographically secure random bytes. This function is used to
* generate random nonces for TPM auth sessions for example. As an implication,
* the generated random bytes should not be predictable for a TPM communication
* interception attack. This implies a local source of randomness should be
* used, i.e. this should not be wired to the TPM RNG directly. Otherwise, an
* attacker with communication interception abilities could launch replay
* attacks by reusing previous nonces.
VbError_t VbExTpmGetRandom(uint8_t *buf, uint32_t length);
/* Non-volatile storage */
#define VBNV_BLOCK_SIZE 16 /* Size of NV storage block in bytes */
* Read the VBNV_BLOCK_SIZE-byte non-volatile storage into buf.
VbError_t VbExNvStorageRead(uint8_t *buf);
* Write the VBNV_BLOCK_SIZE-byte non-volatile storage from buf.
VbError_t VbExNvStorageWrite(const uint8_t *buf);
/* Disk access (previously in boot_device.h) */
/* Flags for VbDisk APIs */
/* Disk is removable. Example removable disks: SD cards, USB keys. */
#define VB_DISK_FLAG_REMOVABLE 0x00000001
* Disk is fixed. If this flag is present, disk is internal to the system and
* not removable. Example fixed disks: internal SATA SSD, eMMC.
#define VB_DISK_FLAG_FIXED 0x00000002
* mutually-exclusive for a single disk. VbExDiskGetInfo() may specify both
* flags to request disks of both types in a single call.
* At some point we could specify additional flags, but we don't currently
* have a way to make use of these:
* USB Device is known to be attached to USB. Note that the SD
* card reader inside x86 systems is attached to USB so this
* isn't super useful.
* SD Device is known to be a SD card. Note that external card
* readers might not return this information, so also of
* questionable use.
* READ_ONLY Device is known to be read-only. Could be used by recovery
* when processing read-only recovery image.
* Disks are used in two ways:
* - As a random-access device to read and write the GPT
* - As a streaming device to read the kernel
* These are implemented differently on raw NAND vs eMMC/SATA/USB
* - On eMMC/SATA/USB, both of these refer to the same underlying
* storage, so they have the same size and LBA size. In this case,
* the GPT should not point to the same address as itself.
* - On raw NAND, the GPT is held on a portion of the SPI flash.
* Random access GPT operations refer to the SPI and streaming
* operations refer to NAND. The GPT may therefore point into
* the same offsets as itself.
* These types are distinguished by the following flag and VbDiskInfo
* has separate fields to describe the random-access ("GPT") and
* streaming aspects of the disk. If a disk is random-access (i.e.
* not raw NAND) then these fields are equal.
#define VB_DISK_FLAG_EXTERNAL_GPT 0x00000004
/* Information on a single disk */
typedef struct VbDiskInfo {
/* Disk handle */
VbExDiskHandle_t handle;
/* Size of a random-access LBA sector in bytes */
uint64_t bytes_per_lba;
/* Number of random-access LBA sectors on the device.
* If streaming_lba_count is 0, this stands in for the size of the
* randomly accessed portion as well as the streaming portion.
* Otherwise, this is only the randomly-accessed portion. */
uint64_t lba_count;
/* Number of streaming sectors on the device */
uint64_t streaming_lba_count;
/* Flags (see VB_DISK_FLAG_* constants) */
uint32_t flags;
* Optional name string, for use in debugging. May be empty or null if
* not available.
const char *name;
} VbDiskInfo;
* Store information into [info] for all disks (storage devices) attached to
* the system which match all of the disk_flags.
* On output, count indicates how many disks are present, and [infos_ptr]
* points to a [count]-sized array of VbDiskInfo structs with the information
* on those disks; this pointer must be freed by calling VbExDiskFreeInfo().
* If count=0, infos_ptr may point to NULL. If [infos_ptr] points to NULL
* because count=0 or error, it is not necessary to call VbExDiskFreeInfo().
* A multi-function device (such as a 4-in-1 card reader) should provide
* multiple disk handles.
* The firmware must not alter or free the list pointed to by [infos_ptr] until
* VbExDiskFreeInfo() is called.
VbError_t VbExDiskGetInfo(VbDiskInfo **infos_ptr, uint32_t *count,
uint32_t disk_flags);
* Free a disk information list [infos] previously returned by
* VbExDiskGetInfo(). If [preserve_handle] != NULL, the firmware must ensure
* that handle remains valid after this call; all other handles from the info
* list need not remain valid after this call.
VbError_t VbExDiskFreeInfo(VbDiskInfo *infos,
VbExDiskHandle_t preserve_handle);
* Read lba_count LBA sectors, starting at sector lba_start, from the disk,
* into the buffer.
* This is used for random access to the GPT. It is not for the partition
* contents. The upper limit is lba_count.
* If the disk handle is invalid (for example, the handle refers to a disk
* which as been removed), the function must return error but must not
* crash.
VbError_t VbExDiskRead(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, void *buffer);
* Write lba_count LBA sectors, starting at sector lba_start, to the disk, from
* the buffer.
* This is used for random access to the GPT. It does not (necessarily) access
* the streaming portion of the device.
* If the disk handle is invalid (for example, the handle refers to a disk
* which as been removed), the function must return error but must not
* crash.
VbError_t VbExDiskWrite(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, const void *buffer);
/* Streaming read interface */
typedef void *VbExStream_t;
* Open a stream on a disk
* @param handle Disk to open the stream against
* @param lba_start Starting sector offset within the disk to stream from
* @param lba_count Maximum extent of the stream in sectors
* @param stream out-paramter for the generated stream
* @return Error code, or VBERROR_SUCCESS.
* This is used for access to the contents of the actual partitions on the
* device. It is not used to access the GPT. The size of the content addressed
* is within streaming_lba_count.
VbError_t VbExStreamOpen(VbExDiskHandle_t handle, uint64_t lba_start,
uint64_t lba_count, VbExStream_t *stream_ptr);
* Read from a stream on a disk
* @param stream Stream to read from
* @param bytes Number of bytes to read
* @param buffer Destination to read into
* @return Error code, or VBERROR_SUCCESS. Failure to read as much data as
* requested is an error.
* This is used for access to the contents of the actual partitions on the
* device. It is not used to access the GPT.
VbError_t VbExStreamRead(VbExStream_t stream, uint32_t bytes, void *buffer);
* Close a stream
* @param stream Stream to close
void VbExStreamClose(VbExStream_t stream);
/* Display */
/* Predefined (default) screens for VbExDisplayScreen(). */
enum VbScreenType_t {
/* Blank (clear) screen */
/* Developer - warning */
/* REMOVED: Developer - easter egg (0x102) */
/* REMOVED: Recovery - remove inserted devices (0x201) */
/* Recovery - insert recovery image */
/* Recovery - inserted image invalid */
/* Recovery - confirm dev mode */
/* Developer - confirm normal mode */
/* Please wait - programming EC */
/* Confirm after DEVELOPER_TO_NORM */
/* Broken screen shown after verification failure */
/* REMOVED: Display base screen (no icons, no text) (0x209) */
/* Detachable Menu - Developer Warning */
/* Detachable Menu - Developer Boot */
/* REMOVED: Detachable Menu - Recovery (0x20c) */
/* Detachable Menu - Confirm Dev Mode */
/* Detachable Menu - Confirm Normal Mode */
/* Detachable Menu - Languages */
/* Detachable Menu - Options */
/* Alt OS picker screen */
* Display a predefined screen; see VB_SCREEN_* for valid screens.
* This is a backup method of screen display, intended for use if the GBB does
* not contain a full set of bitmaps. It is acceptable for the backup screen
* to be simple ASCII text such as "NO GOOD" or "INSERT"; these screens should
* only be seen during development.
VbError_t VbExDisplayScreen(uint32_t screen_type, uint32_t locale);
* Display a predefined menu screen; see VB_SCREEN_* for valid screens.
* @param screen_type ID of screen to draw
* @param locale language to display
* @param selected_index Index of menu item that is currently selected.
* @param disabled_idx_mask Bitmap for enabling/disabling certain menu items.
* each bit corresponds to the menu item's index.
* @param redraw_base Setting 1 will force a full redraw of the screen
* @return VBERROR_SUCCESS or error code on error.
VbError_t VbExDisplayMenu(uint32_t screen_type, uint32_t locale,
uint32_t selected_index, uint32_t disabled_idx_mask,
uint32_t redraw_base);
* Display a string containing debug information on the screen, rendered in a
* platform-dependent font. Should be able to handle newlines '\n' in the
* string. Firmware must support displaying at least 20 lines of text, where
* each line may be at least 80 characters long. If the firmware has its own
* debug state, it may display it to the screen below this information.
* NOTE: This is what we currently display when TAB is pressed. Some
* information (HWID, recovery reason) is ours; some (CMOS breadcrumbs) is
* platform-specific. If we decide to soft-render the HWID string
* (chrome-os-partner:3693), we'll need to maintain our own fonts, so we'll
* likely display it via VbExDisplayImage() above.
VbError_t VbExDisplayDebugInfo(const char *info_str);
/* Keyboard and switches */
/* Key codes for required non-printable-ASCII characters. */
enum VbKeyCode_t {
VB_KEY_UP = 0x100,
VB_KEY_DOWN = 0x101,
VB_KEY_LEFT = 0x102,
VB_KEY_RIGHT = 0x103,
* WARNING!!! Before updating the codes in enum VbButtonCode_t, ensure that the
* code does not overlap the values in VbKeyCode_t unless the button action is
* the same as key action.
enum VbButtonCode_t {
/* Volume up/down short press match the values in 8042 driver. */
/* Dummy values used below. */
/* Flags for additional information.
* TODO(semenzato): consider adding flags for modifiers instead of
* making up some of the key codes above.
enum VbKeyFlags_t {
* Read the next keypress from the keyboard buffer.
* Returns the keypress, or zero if no keypress is pending or error.
* The following keys must be returned as ASCII character codes:
* 0x08 Backspace
* 0x09 Tab
* 0x0D Enter (carriage return)
* 0x01 - 0x1A Ctrl+A - Ctrl+Z (yes, those alias with backspace/tab/enter)
* 0x1B Esc
* 0x20 Space
* 0x30 - 0x39 '0' - '9'
* 0x60 - 0x7A 'a' - 'z'
* Some extended keys must also be supported; see the VB_KEY_* defines above.
* Keys ('/') or key-chords (Fn+Q) not defined above may be handled in any of
* the following ways:
* 1. Filter (don't report anything if one of these keys is pressed).
* 2. Report as ASCII (if a well-defined ASCII value exists for the key).
* 3. Report as any other value in the range 0x200 - 0x2FF.
* It is not permitted to report a key as a multi-byte code (for example,
* sending an arrow key as the sequence of keys '\x1b', '[', '1', 'A'). */
uint32_t VbExKeyboardRead(void);
* Same as VbExKeyboardRead(), but return extra information.
uint32_t VbExKeyboardReadWithFlags(uint32_t *flags_ptr);
* Return the current state of the switches specified in request_mask
uint32_t VbExGetSwitches(uint32_t request_mask);
/* Embedded controller (EC) */
* All these functions take a devidx parameter, which indicates which embedded
* processor the call applies to. At present, only devidx=0 is valid, but
* upcoming CLs will add support for multiple devices.
* This is called only if the system implements a keyboard-based (virtual)
* developer switch. It must return true only if the system has an embedded
* controller which is provably running in its RO firmware at the time the
* function is called.
int VbExTrustEC(int devidx);
* Check if the EC is currently running rewritable code.
* If the EC is in RO code, sets *in_rw=0.
* If the EC is in RW code, sets *in_rw non-zero.
* If the current EC image is unknown, returns error. */
VbError_t VbExEcRunningRW(int devidx, int *in_rw);
* Request the EC jump to its rewritable code. If successful, returns when the
* EC has booting its RW code far enough to respond to subsequent commands.
* Does nothing if the EC is already in its rewritable code.
VbError_t VbExEcJumpToRW(int devidx);
* Tell the EC to refuse another jump until it reboots. Subsequent calls to
* VbExEcJumpToRW() in this boot will fail.
VbError_t VbExEcDisableJump(int devidx);
* Read the SHA-256 hash of the selected EC image.
* @param devidx Device index. 0: EC, 1: PD.
* @param select Image to get hash of. RO or RW.
* @param hash Pointer to the hash.
* @param hash_size Pointer to the hash size.
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbExEcHashImage(int devidx, enum VbSelectFirmware_t select,
const uint8_t **hash, int *hash_size);
* Get the expected contents of the EC image associated with the main firmware
* specified by the "select" argument.
VbError_t VbExEcGetExpectedImage(int devidx, enum VbSelectFirmware_t select,
const uint8_t **image, int *image_size);
* Read the SHA-256 hash of the expected contents of the EC image associated
* with the main firmware specified by the "select" argument.
VbError_t VbExEcGetExpectedImageHash(int devidx, enum VbSelectFirmware_t select,
const uint8_t **hash, int *hash_size);
* Update the selected EC image.
VbError_t VbExEcUpdateImage(int devidx, enum VbSelectFirmware_t select,
const uint8_t *image, int image_size);
* Lock the selected EC code to prevent updates until the EC is rebooted.
* Subsequent calls to VbExEcUpdateImage() with the same region this boot will
* fail.
VbError_t VbExEcProtect(int devidx, enum VbSelectFirmware_t select);
* Info the EC of the boot mode selected by the AP.
* mode: Normal, Developer, or Recovery
VbError_t VbExEcEnteringMode(int devidx, enum VbEcBootMode_t mode);
* Perform EC post-verification / updating / jumping actions.
* This routine is called to perform certain actions that must wait until
* after the EC resides in its `final` image (the image the EC will
* run for the duration of boot). These actions include verifying that
* enough power is available to continue with boot.
* @param in_recovery 1 if recovery mode is selected by the AP, 0 otherwise.
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbExEcVbootDone(int in_recovery);
* Request EC to stop discharging and cut-off battery.
VbError_t VbExEcBatteryCutOff(void);
* severity levels for an auxiliary firmware update request
typedef enum {
/* no update needed */
/* update needed, can be done quickly */
/* update needed, "this would take a while..." */
} VbAuxFwUpdateSeverity_t;
* Perform auxiliary firmware checks.
* This is called after the EC has been updated and is intended to
* version-check additional firmware blobs such as TCPCs.
* @param severity return parameter for health of auxiliary firmware
* 0: no update needed
* 1: fast update needed
* 2: slow update needed
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbExCheckAuxFw(VbAuxFwUpdateSeverity_t *severity);
* Perform auxiliary firmware update(s).
* This is called after the EC has been updated and is intended to
* update additional firmware blobs such as TCPCs.
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbExUpdateAuxFw(void);
/* Misc */
* Check if the firmware needs to shut down the system.
* Returns a non-zero VB_SHUTDOWN_REQUEST mask indicating the reason(s) for
* shutdown if a shutdown is being requested (see VB_SHUTDOWN_REQUEST_*), or 0
* if a shutdown is not being requested.
* NOTE: When we're displaying a screen, pressing the power button should shut
* down the computer. We need a way to break out of our control loop so this
* can occur cleanly.
uint32_t VbExIsShutdownRequested(void);
* Shutdown requested for a reason which is not defined among other
* VB_SHUTDOWN_REQUEST_* values. This must be defined as 1 for backward
* compatibility with old versions of the API.
#define VB_SHUTDOWN_REQUEST_OTHER 0x00000001
/* Shutdown requested due to a lid switch being closed. */
/* Shutdown requested due to a power button being pressed. */
/* Constants for compression_type */
enum {
COMPRESS_EFIv1, /* The x86 BIOS only supports this */
COMPRESS_LZMA1, /* The ARM BIOS supports LZMA1 */
* Execute legacy boot option.
int VbExLegacy(void);
/* Regions for VbExRegionRead() */
enum vb_firmware_region {
VB_REGION_GBB, /* Google Binary Block - see gbbheader.h */
* Check if the firmware wants to override GPT entry priority.
* In case of kernel entry, check if there is an override of priority
* available. This is used to select a particular partition to boot in the
* current boot cycle. Rollback protection, image verification and all other
* checks in LoadKernel still remain the same.
* @param e Gpt Entry to check for priority override.
* @return 0 if no override, 1-15 for override priority.
uint8_t VbExOverrideGptEntryPriority(const GptEntry *e);
* Return number of locales supported
* @param count Pointer to the number of locales.
* @return VBERROR_... error, VBERROR_SUCCESS on success.
VbError_t VbExGetLocalizationCount(uint32_t *count);