vb2: Modify phase2 behavior for S3 resume case
If a platform does verification of memory init then it must be careful
to use the same slot for resume that it booted from. This is
accomplished by adding a context flag to indicate this is an S3 resume
and that vboot should treat it differently than a normal boot.
When this flag is set then the same slot that was booted is read from
VBNV and re-used for the resume path, without adjusting any try flags.
If this slot is B then the related context flag is set.
This will allow the firmware updater to update the other (non-booted)
slot and set flags indicating that on the next boot the updated slot
should be tried, while still allowing suspend/resume to work with the
existing firmware slot.
This assumes that the last tried slot was successfully booted, which
should be a safe assumption since the system was able to boot and then
suspend. It isn't reliable to check last_fw_result for "success"
status because that status is only set some time after boot when
chromeos-setgoodkernel calls chromeos-firmwareupdate --mode=bootok
and so it may still report a status of "trying" on resume depending
on how soon after boot the suspend happened.
It also avoids setting the vboot flag indicating that a slot choice
was made in order to avoid altering the try counter on failure since
this is explicitly not attempting to boot the new slot.
BUG=chromium:577269
BRANCH=glados
TEST=manually tested on chell:
1) ensure that booting from slot A resumes from slot A.
2) ensure that booting from slot B resumes from slot B.
3) do RW update while booted from slot A (so the flags are set to try
slot B) and ensure that suspend/resume still functions properly using
current slot A.
4) do RW update while booted from slot B (so the flags are set to try
slot A) and ensure that suspend/resume still functions properly using
current slot B.
Change-Id: I500faef2b5d19a02f32839976354abf6d551c9f6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Previous-Reviewed-on: https://chromium-review.googlesource.com/328812
(cherry picked from commit 19e70098fb0eafb61c8092781629630732c583e2)
Reviewed-on: https://chromium-review.googlesource.com/329008
diff --git a/firmware/2lib/2api.c b/firmware/2lib/2api.c
index 7f12d22..059cb6c 100644
--- a/firmware/2lib/2api.c
+++ b/firmware/2lib/2api.c
@@ -111,6 +111,24 @@
{
int rv;
+ /*
+ * Use the slot from the last boot if this is a resume. Do not set
+ * VB2_SD_STATUS_CHOSE_SLOT so the try counter is not decremented on
+ * failure as we are explicitly not attempting to boot from a new slot.
+ */
+ if (ctx->flags & VB2_CONTEXT_S3_RESUME) {
+ struct vb2_shared_data *sd = vb2_get_sd(ctx);
+
+ /* Set the current slot to the last booted slot */
+ sd->fw_slot = vb2_nv_get(ctx, VB2_NV_FW_TRIED);
+
+ /* Set context flag if we're using slot B */
+ if (sd->fw_slot)
+ ctx->flags |= VB2_CONTEXT_FW_SLOT_B;
+
+ return VB2_SUCCESS;
+ }
+
/* Always clear RAM when entering developer mode */
if (ctx->flags & VB2_CONTEXT_DEVELOPER_MODE)
ctx->flags |= VB2_CONTEXT_CLEAR_RAM;
diff --git a/firmware/2lib/include/2api.h b/firmware/2lib/include/2api.h
index bf8f639..709db48 100644
--- a/firmware/2lib/include/2api.h
+++ b/firmware/2lib/include/2api.h
@@ -129,6 +129,9 @@
* unrecoverable crash loop.
*/
VB2_CONTEXT_SECDATA_WANTS_REBOOT = (1 << 13),
+
+ /* Boot is S3->S0 resume, not S5->S0 normal boot */
+ VB2_CONTEXT_S3_RESUME = (1 << 14),
};
/*