| # Copyright 1999-2017 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| |
| EAPI=6 |
| inherit autotools eutils linux-info multilib systemd toolchain-funcs udev flag-o-matic |
| |
| DESCRIPTION="User-land utilities for LVM2 (device-mapper) software" |
| HOMEPAGE="https://sourceware.org/lvm2/" |
| SRC_URI="ftp://sourceware.org/pub/lvm2/${PN/lvm/LVM}.${PV}.tgz |
| ftp://sourceware.org/pub/lvm2/old/${PN/lvm/LVM}.${PV}.tgz" |
| |
| LICENSE="GPL-2" |
| SLOT="0" |
| KEYWORDS="*" |
| IUSE="readline static static-libs systemd clvm cman corosync lvm1 lvm2create_initrd openais selinux +udev +thin device-mapper-only" |
| REQUIRED_USE="device-mapper-only? ( !clvm !cman !corosync !lvm1 !lvm2create_initrd !openais !thin ) |
| systemd? ( udev ) |
| clvm? ( !systemd )" |
| |
| DEPEND_COMMON=" |
| clvm? ( |
| cman? ( =sys-cluster/cman-3* ) |
| corosync? ( sys-cluster/corosync ) |
| openais? ( sys-cluster/openais ) |
| =sys-cluster/libdlm-3* |
| ) |
| |
| readline? ( sys-libs/readline:0= ) |
| systemd? ( >=sys-apps/systemd-205:0= ) |
| udev? ( >=virtual/libudev-208:=[static-libs?] )" |
| # /run is now required for locking during early boot. /var cannot be assumed to |
| # be available -- thus, pull in recent enough baselayout for /run. |
| # This version of LVM is incompatible with cryptsetup <1.1.2. |
| RDEPEND="${DEPEND_COMMON} |
| >=sys-apps/baselayout-2.2 |
| !<sys-apps/openrc-0.11 |
| !<sys-fs/cryptsetup-1.1.2 |
| !!sys-fs/clvm |
| !!sys-fs/lvm-user |
| >=sys-apps/util-linux-2.16 |
| lvm2create_initrd? ( sys-apps/makedev ) |
| thin? ( >=sys-block/thin-provisioning-tools-0.3.0 )" |
| # note: thin- 0.3.0 is required to avoid --disable-thin_check_needs_check |
| # USE 'static' currently only works with eudev, bug 520450 |
| DEPEND="${DEPEND_COMMON} |
| virtual/pkgconfig |
| >=sys-devel/binutils-2.20.1-r1 |
| sys-devel/autoconf-archive |
| static? ( |
| selinux? ( sys-libs/libselinux[static-libs] ) |
| udev? ( >=sys-fs/eudev-3.1.2[static-libs] ) |
| >=sys-apps/util-linux-2.16[static-libs] |
| )" |
| |
| S=${WORKDIR}/${PN/lvm/LVM}.${PV} |
| |
| PATCHES=( |
| # Gentoo specific modification(s): |
| "${FILESDIR}"/${PN}-2.02.129-example.conf.in.patch |
| |
| # For upstream -- review and forward: |
| "${FILESDIR}"/${PN}-2.02.63-always-make-static-libdm.patch |
| "${FILESDIR}"/${PN}-2.02.56-lvm2create_initrd.patch |
| "${FILESDIR}"/${PN}-2.02.67-createinitrd.patch #301331 |
| "${FILESDIR}"/${PN}-2.02.99-locale-muck.patch #330373 |
| "${FILESDIR}"/${PN}-2.02.70-asneeded.patch # -Wl,--as-needed |
| "${FILESDIR}"/${PN}-2.02.139-dynamic-static-ldflags.patch #332905 |
| "${FILESDIR}"/${PN}-2.02.129-static-pkgconfig-libs.patch #370217, #439414 + blkid |
| "${FILESDIR}"/${PN}-2.02.130-pthread-pkgconfig.patch #492450 |
| "${FILESDIR}"/${PN}-2.02.145-mkdev.patch #580062 |
| ) |
| |
| pkg_setup() { |
| local CONFIG_CHECK="~SYSVIPC" |
| |
| if use udev; then |
| local WARNING_SYSVIPC="CONFIG_SYSVIPC:\tis not set (required for udev sync)\n" |
| if linux_config_exists; then |
| local uevent_helper_path=$(linux_chkconfig_string UEVENT_HELPER_PATH) |
| if [ -n "${uevent_helper_path}" ] && [ "${uevent_helper_path}" != '""' ]; then |
| ewarn "It's recommended to set an empty value to the following kernel config option:" |
| ewarn "CONFIG_UEVENT_HELPER_PATH=${uevent_helper_path}" |
| fi |
| fi |
| fi |
| |
| check_extra_config |
| |
| # 1. Genkernel no longer copies /sbin/lvm blindly. |
| if use static; then |
| elog "Warning, we no longer overwrite /sbin/lvm and /sbin/dmsetup with" |
| elog "their static versions. If you need the static binaries," |
| elog "you must append .static to the filename!" |
| fi |
| } |
| |
| src_prepare() { |
| default |
| |
| sed -i \ |
| -e "1iAR = $(tc-getAR)" \ |
| -e "s:CC ?= @CC@:CC = $(tc-getCC):" \ |
| make.tmpl.in || die #444082 |
| |
| sed -i -e '/FLAG/s:-O2::' configure{.in,} || die #480212 |
| |
| if use udev && ! use device-mapper-only; then |
| sed -i -e '/use_lvmetad =/s:0:1:' conf/example.conf.in || die #514196 |
| elog "Notice that \"use_lvmetad\" setting is enabled with USE=\"udev\" in" |
| elog "/etc/lvm/lvm.conf, which will require restart of udev, lvm, and lvmetad" |
| elog "if it was previously disabled." |
| fi |
| |
| sed -i -e "s:/usr/bin/true:$(type -P true):" scripts/blk_availability_systemd_red_hat.service.in || die #517514 |
| |
| # Without thin-privision-tools, there is nothing to install for target install_man7: |
| use thin || { sed -i -e '/^install_lvm2/s:install_man7::' man/Makefile.in || die; } |
| |
| eautoreconf |
| } |
| |
| src_configure() { |
| filter-flags -flto |
| local myconf=() |
| local buildmode |
| |
| myconf+=( $(use_enable !device-mapper-only dmeventd) ) |
| myconf+=( $(use_enable !device-mapper-only cmdlib) ) |
| myconf+=( $(use_enable !device-mapper-only applib) ) |
| myconf+=( $(use_enable !device-mapper-only fsadm) ) |
| myconf+=( $(use_enable !device-mapper-only lvmetad) ) |
| use device-mapper-only && myconf+=( --disable-udev-systemd-background-jobs ) |
| |
| # Most of this package does weird stuff. |
| # The build options are tristate, and --without is NOT supported |
| # options: 'none', 'internal', 'shared' |
| if use static; then |
| buildmode="internal" |
| # This only causes the .static versions to become available |
| myconf+=( --enable-static_link ) |
| else |
| buildmode="shared" |
| fi |
| dmbuildmode=$(use !device-mapper-only && echo internal || echo none) |
| |
| # dmeventd requires mirrors to be internal, and snapshot available |
| # so we cannot disable them |
| myconf+=( --with-mirrors=${dmbuildmode} ) |
| myconf+=( --with-snapshots=${dmbuildmode} ) |
| if use thin; then |
| myconf+=( --with-thin=internal --with-cache=internal ) |
| local texec |
| for texec in check dump repair restore; do |
| myconf+=( --with-thin-${texec}="${EPREFIX}"/sbin/thin_${texec} ) |
| myconf+=( --with-cache-${texec}="${EPREFIX}"/sbin/cache_${texec} ) |
| done |
| else |
| myconf+=( --with-thin=none --with-cache=none ) |
| fi |
| |
| if use lvm1; then |
| myconf+=( --with-lvm1=${buildmode} ) |
| else |
| myconf+=( --with-lvm1=none ) |
| fi |
| |
| # disable O_DIRECT support on hppa, breaks pv detection (#99532) |
| use hppa && myconf+=( --disable-o_direct ) |
| |
| if use clvm; then |
| myconf+=( --with-cluster=${buildmode} ) |
| # 4-state! Make sure we get it right, per bug 210879 |
| # Valid options are: none, cman, gulm, all |
| # |
| # 2009/02: |
| # gulm is removed now, now dual-state: |
| # cman, none |
| # all still exists, but is not needed |
| # |
| # 2009/07: |
| # TODO: add corosync and re-enable ALL |
| local clvmd="" |
| use cman && clvmd="cman" |
| #clvmd="${clvmd/cmangulm/all}" |
| use corosync && clvmd="${clvmd:+$clvmd,}corosync" |
| use openais && clvmd="${clvmd:+$clvmd,}openais" |
| [ -z "${clvmd}" ] && clvmd="none" |
| myconf+=( --with-clvmd=${clvmd} ) |
| myconf+=( --with-pool=${buildmode} ) |
| else |
| myconf+=( --with-clvmd=none --with-cluster=none ) |
| fi |
| |
| econf \ |
| $(use_enable readline) \ |
| $(use_enable selinux) \ |
| --enable-pkgconfig \ |
| --with-confdir="${EPREFIX}"/etc \ |
| --exec-prefix="${EPREFIX}" \ |
| --sbindir="${EPREFIX}/sbin" \ |
| --with-staticdir="${EPREFIX}"/sbin \ |
| --libdir="${EPREFIX}/$(get_libdir)" \ |
| --with-usrlibdir="${EPREFIX}/usr/$(get_libdir)" \ |
| --with-default-dm-run-dir=/run \ |
| --with-default-run-dir=/run/lvm \ |
| --with-default-locking-dir=/run/lock/lvm \ |
| --with-default-pid-dir=/run \ |
| $(use_enable udev udev_rules) \ |
| $(use_enable udev udev_sync) \ |
| $(use_with udev udevdir "$(get_udevdir)"/rules.d) \ |
| $(use_enable systemd udev-systemd-background-jobs) \ |
| --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \ |
| ${myconf[@]} \ |
| CLDFLAGS="${LDFLAGS}" |
| } |
| |
| src_compile() { |
| pushd include >/dev/null |
| emake |
| popd >/dev/null |
| |
| if use device-mapper-only ; then |
| emake device-mapper |
| else |
| emake |
| emake CC="$(tc-getCC)" -C scripts lvm2_activation_generator_systemd_red_hat |
| fi |
| } |
| |
| src_install() { |
| local inst |
| INSTALL_TARGETS="install install_tmpfiles_configuration" |
| # install systemd related files only when requested, bug #522430 |
| use systemd && INSTALL_TARGETS="${INSTALL_TARGETS} install_systemd_units install_systemd_generators" |
| use device-mapper-only && INSTALL_TARGETS="install_device-mapper" |
| for inst in ${INSTALL_TARGETS}; do |
| emake DESTDIR="${D}" ${inst} |
| done |
| |
| newinitd "${FILESDIR}"/device-mapper.rc-2.02.105-r2 device-mapper |
| newconfd "${FILESDIR}"/device-mapper.conf-1.02.22-r3 device-mapper |
| |
| if use !device-mapper-only ; then |
| newinitd "${FILESDIR}"/dmeventd.initd-2.02.67-r1 dmeventd |
| newinitd "${FILESDIR}"/lvm.rc-2.02.116-r6 lvm |
| newconfd "${FILESDIR}"/lvm.confd-2.02.28-r2 lvm |
| |
| newinitd "${FILESDIR}"/lvm-monitoring.initd-2.02.105-r2 lvm-monitoring |
| newinitd "${FILESDIR}"/lvmetad.initd-2.02.116-r3 lvmetad |
| fi |
| |
| if use clvm; then |
| newinitd "${FILESDIR}"/clvmd.rc-2.02.39 clvmd |
| newconfd "${FILESDIR}"/clvmd.confd-2.02.39 clvmd |
| fi |
| |
| if use static-libs; then |
| dolib.a libdm/ioctl/libdevmapper.a |
| if use !device-mapper-only ; then |
| dolib.a libdaemon/client/libdaemonclient.a #462908 |
| #gen_usr_ldscript libdevmapper.so |
| dolib.a daemons/dmeventd/libdevmapper-event.a |
| #gen_usr_ldscript libdevmapper-event.so |
| fi |
| else |
| rm -f "${ED}"usr/$(get_libdir)/{libdevmapper-event,liblvm2cmd,liblvm2app,libdevmapper}.a |
| fi |
| |
| if use lvm2create_initrd; then |
| dosbin scripts/lvm2create_initrd/lvm2create_initrd |
| doman scripts/lvm2create_initrd/lvm2create_initrd.8 |
| newdoc scripts/lvm2create_initrd/README README.lvm2create_initrd |
| fi |
| |
| insinto /etc |
| doins "${FILESDIR}"/dmtab |
| |
| dodoc README VERSION* WHATS_NEW WHATS_NEW_DM doc/*.{c,txt} conf/*.conf |
| } |
| |
| pkg_postinst() { |
| ewarn "Make sure the \"lvm\" init script is in the runlevels:" |
| ewarn "# rc-update add lvm boot" |
| ewarn |
| ewarn "Make sure to enable lvmetad in /etc/lvm/lvm.conf if you want" |
| ewarn "to enable lvm autoactivation and metadata caching." |
| } |
| |
| src_test() { |
| einfo "Tests are disabled because of device-node mucking, if you want to" |
| einfo "run tests, compile the package and see ${S}/tests" |
| } |