blob: 7c0635cbf8ec7bfe9e3aeb8797da2b6d2bfb71b1 [file] [log] [blame]
# Copyright 1999-2008 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/eclass/toolchain.eclass,v 1.425 2010/04/25 18:04:48 armin76 Exp $
#
# Maintainer: Toolchain Ninjas <toolchain@gentoo.org>
HOMEPAGE="http://gcc.gnu.org/"
LICENSE="GPL-2 LGPL-2.1"
RESTRICT="strip" # cross-compilers need controlled stripping
#---->> eclass stuff <<----
inherit eutils versionator libtool toolchain-funcs flag-o-matic gnuconfig multilib fixheadtails
EXPORT_FUNCTIONS pkg_setup src_unpack src_compile src_test pkg_preinst src_install pkg_postinst pkg_prerm pkg_postrm
DESCRIPTION="Based on the ${ECLASS} eclass"
FEATURES=${FEATURES/multilib-strict/}
toolchain_pkg_setup() {
gcc_pkg_setup
}
toolchain_src_unpack() {
gcc_src_unpack
}
toolchain_src_compile() {
gcc_src_compile
}
toolchain_src_test() {
gcc_src_test
}
toolchain_pkg_preinst() {
${ETYPE}_pkg_preinst
}
toolchain_src_install() {
${ETYPE}_src_install
}
toolchain_pkg_postinst() {
${ETYPE}_pkg_postinst
}
toolchain_pkg_prerm() {
${ETYPE}_pkg_prerm
}
toolchain_pkg_postrm() {
${ETYPE}_pkg_postrm
}
#----<< eclass stuff >>----
#---->> globals <<----
export CTARGET=${CTARGET:-${CHOST}}
if [[ ${CTARGET} = ${CHOST} ]] ; then
if [[ ${CATEGORY/cross-} != ${CATEGORY} ]] ; then
export CTARGET=${CATEGORY/cross-}
fi
fi
is_crosscompile() {
[[ ${CHOST} != ${CTARGET} ]]
}
tc_version_is_at_least() { version_is_at_least "$1" "${2:-${GCC_PV}}" ; }
GCC_PV=${TOOLCHAIN_GCC_PV:-${PV}}
GCC_PVR=${GCC_PV}
[[ ${PR} != "r0" ]] && GCC_PVR=${GCC_PVR}-${PR}
GCC_RELEASE_VER=$(get_version_component_range 1-3 ${GCC_PV})
GCC_BRANCH_VER=$(get_version_component_range 1-2 ${GCC_PV})
GCCMAJOR=$(get_version_component_range 1 ${GCC_PV})
GCCMINOR=$(get_version_component_range 2 ${GCC_PV})
GCCMICRO=$(get_version_component_range 3 ${GCC_PV})
[[ ${BRANCH_UPDATE-notset} == "notset" ]] && BRANCH_UPDATE=$(get_version_component_range 4 ${GCC_PV})
# According to gcc/c-cppbuiltin.c, GCC_CONFIG_VER MUST match this regex.
# ([^0-9]*-)?[0-9]+[.][0-9]+([.][0-9]+)?([- ].*)?
GCC_CONFIG_VER=${GCC_CONFIG_VER:-$(replace_version_separator 3 '-' ${GCC_PV})}
# Pre-release support
if [[ ${GCC_PV} != ${GCC_PV/_pre/-} ]] ; then
PRERELEASE=${GCC_PV/_pre/-}
fi
# make _alpha and _beta ebuilds automatically use a snapshot
if [[ ${GCC_PV} == *_alpha* ]] ; then
SNAPSHOT=${GCC_BRANCH_VER}-${GCC_PV##*_alpha}
elif [[ ${GCC_PV} == *_beta* ]] ; then
SNAPSHOT=${GCC_BRANCH_VER}-${GCC_PV##*_beta}
elif [[ ${GCC_PV} == *_rc* ]] ; then
SNAPSHOT=${GCC_PV%_rc*}-RC-${GCC_PV##*_rc}
fi
export GCC_FILESDIR=${GCC_FILESDIR:-${FILESDIR}}
if [[ ${ETYPE} == "gcc-library" ]] ; then
GCC_VAR_TYPE=${GCC_VAR_TYPE:-non-versioned}
GCC_LIB_COMPAT_ONLY=${GCC_LIB_COMPAT_ONLY:-true}
GCC_TARGET_NO_MULTILIB=${GCC_TARGET_NO_MULTILIB:-true}
else
GCC_VAR_TYPE=${GCC_VAR_TYPE:-versioned}
GCC_LIB_COMPAT_ONLY="false"
GCC_TARGET_NO_MULTILIB=${GCC_TARGET_NO_MULTILIB:-false}
fi
PREFIX=${TOOLCHAIN_PREFIX:-/usr}
if [[ ${GCC_VAR_TYPE} == "versioned" ]] ; then
if tc_version_is_at_least 3.4.0 ; then
LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/lib/gcc/${CTARGET}/${GCC_CONFIG_VER}}
else
LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/lib/gcc-lib/${CTARGET}/${GCC_CONFIG_VER}}
fi
INCLUDEPATH=${TOOLCHAIN_INCLUDEPATH:-${LIBPATH}/include}
if is_crosscompile ; then
BINPATH=${TOOLCHAIN_BINPATH:-${PREFIX}/${CHOST}/${CTARGET}/gcc-bin/${GCC_CONFIG_VER}}
else
BINPATH=${TOOLCHAIN_BINPATH:-${PREFIX}/${CTARGET}/gcc-bin/${GCC_CONFIG_VER}}
fi
DATAPATH=${TOOLCHAIN_DATAPATH:-${PREFIX}/share/gcc-data/${CTARGET}/${GCC_CONFIG_VER}}
# Dont install in /usr/include/g++-v3/, but in gcc internal directory.
# We will handle /usr/include/g++-v3/ with gcc-config ...
STDCXX_INCDIR=${TOOLCHAIN_STDCXX_INCDIR:-${LIBPATH}/include/g++-v${GCC_BRANCH_VER/\.*/}}
elif [[ ${GCC_VAR_TYPE} == "non-versioned" ]] ; then
# using non-versioned directories to install gcc, like what is currently
# done for ppc64 and 3.3.3_pre, is a BAD IDEA. DO NOT do it!! However...
# setting up variables for non-versioned directories might be useful for
# specific gcc targets, like libffi. Note that we dont override the value
# returned by get_libdir here.
LIBPATH=${TOOLCHAIN_LIBPATH:-${PREFIX}/$(get_libdir)}
INCLUDEPATH=${TOOLCHAIN_INCLUDEPATH:-${PREFIX}/include}
BINPATH=${TOOLCHAIN_BINPATH:-${PREFIX}/bin}
DATAPATH=${TOOLCHAIN_DATAPATH:-${PREFIX}/share}
STDCXX_INCDIR=${TOOLCHAIN_STDCXX_INCDIR:-${PREFIX}/include/g++-v3}
fi
#----<< globals >>----
#---->> SLOT+IUSE logic <<----
if [[ ${ETYPE} == "gcc-library" ]] ; then
IUSE="nls build test"
SLOT="${CTARGET}-${SO_VERSION_SLOT:-5}"
else
IUSE="multislot nptl test"
if [[ ${PN} != "kgcc64" && ${PN} != gcc-* ]] ; then
IUSE="${IUSE} altivec build fortran nls nocxx"
[[ -n ${PIE_VER} ]] && IUSE="${IUSE} nopie"
[[ -n ${PP_VER} ]] && IUSE="${IUSE} nossp"
[[ -n ${SPECS_VER} ]] && IUSE="${IUSE} nossp"
[[ -n ${HTB_VER} ]] && IUSE="${IUSE} boundschecking"
[[ -n ${D_VER} ]] && IUSE="${IUSE} d"
if tc_version_is_at_least 3 ; then
IUSE="${IUSE} bootstrap doc gcj gtk hardened libffi multilib objc vanilla"
# gcc-{nios2,bfin} don't accept these
if [[ ${PN} == "gcc" ]] ; then
IUSE="${IUSE} n32 n64"
fi
tc_version_is_at_least "4.0" && IUSE="${IUSE} objc-gc mudflap"
tc_version_is_at_least "4.1" && IUSE="${IUSE} objc++"
tc_version_is_at_least "4.2" && IUSE="${IUSE} openmp"
tc_version_is_at_least "4.3" && IUSE="${IUSE} fixed-point"
tc_version_is_at_least "4.4" && IUSE="${IUSE} graphite"
tc_version_is_at_least "4.5" && IUSE="${IUSE} lto"
fi
fi
# Support upgrade paths here or people get pissed
if use multislot ; then
SLOT="${CTARGET}-${GCC_CONFIG_VER}"
elif is_crosscompile; then
SLOT="${CTARGET}-${GCC_BRANCH_VER}"
else
SLOT="${GCC_BRANCH_VER}"
fi
fi
#----<< SLOT+IUSE logic >>----
#---->> S + SRC_URI essentials <<----
# This function sets the source directory depending on whether we're using
# a prerelease, snapshot, or release tarball. To use it, just set S with:
#
# S="$(gcc_get_s_dir)"
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_get_s_dir() {
local GCC_S
if [[ -n ${PRERELEASE} ]] ; then
GCC_S=${WORKDIR}/gcc-${PRERELEASE}
elif [[ -n ${SNAPSHOT} ]] ; then
GCC_S=${WORKDIR}/gcc-${SNAPSHOT}
else
GCC_S=${WORKDIR}/gcc-${GCC_RELEASE_VER}
fi
echo "${GCC_S}"
}
# This function handles the basics of setting the SRC_URI for a gcc ebuild.
# To use, set SRC_URI with:
#
# SRC_URI="$(get_gcc_src_uri)"
#
# Other than the variables normally set by portage, this function's behavior
# can be altered by setting the following:
#
# SNAPSHOT
# If set, this variable signals that we should be using a snapshot
# of gcc from ftp://sources.redhat.com/pub/gcc/snapshots/. It is
# expected to be in the format "YYYY-MM-DD". Note that if the ebuild
# has a _pre suffix, this variable is ignored and the prerelease
# tarball is used instead.
#
# BRANCH_UPDATE
# If set, this variable signals that we should be using the main
# release tarball (determined by ebuild version) and applying a
# CVS branch update patch against it. The location of this branch
# update patch is assumed to be in ${GENTOO_TOOLCHAIN_BASE_URI}.
# Just like with SNAPSHOT, this variable is ignored if the ebuild
# has a _pre suffix.
#
# PATCH_VER
# PATCH_GCC_VER
# This should be set to the version of the gentoo patch tarball.
# The resulting filename of this tarball will be:
# gcc-${PATCH_GCC_VER:-${GCC_RELEASE_VER}}-patches-${PATCH_VER}.tar.bz2
#
# PIE_VER
# PIE_GCC_VER
# obsoleted: PIE_CORE
# These variables control patching in various updates for the logic
# controlling Position Independant Executables. PIE_VER is expected
# to be the version of this patch, PIE_GCC_VER the gcc version of
# the patch, and PIE_CORE (obsoleted) the actual filename of the patch.
# An example:
# PIE_VER="8.7.6.5"
# PIE_GCC_VER="3.4.0"
# The resulting filename of this tarball will be:
# gcc-${PIE_GCC_VER:-${GCC_RELEASE_VER}}-piepatches-v${PIE_VER}.tar.bz2
# old syntax (do not define PIE_CORE anymore):
# PIE_CORE="gcc-3.4.0-piepatches-v${PIE_VER}.tar.bz2"
#
# SPECS_VER
# SPECS_GCC_VER
# This is for the minispecs files included in the hardened gcc-4.x
#
# PP_VER
# PP_GCC_VER
# obsoleted: PP_FVER
# These variables control patching in stack smashing protection
# support. They both control the version of ProPolice to download.
#
# PP_VER / PP_GCC_VER
# Used to roll our own custom tarballs of ssp.
# PP_FVER / PP_VER
# Used for mirroring ssp straight from IBM.
# PP_VER sets the version of the directory in which to find the
# patch, and PP_FVER sets the version of the patch itself. For
# example:
# PP_VER="3_4"
# PP_FVER="${PP_VER//_/.}-2"
# would download gcc3_4/protector-3.4-2.tar.gz
#
# HTB_VER
# HTB_GCC_VER
# These variables control whether or not an ebuild supports Herman
# ten Brugge's bounds-checking patches. If you want to use a patch
# for an older gcc version with a new gcc, make sure you set
# HTB_GCC_VER to that version of gcc.
#
# MAN_VER
# The version of gcc for which we will download manpages. This will
# default to ${GCC_RELEASE_VER}, but we may not want to pre-generate man pages
# for prerelease test ebuilds for example. This allows you to
# continue using pre-generated manpages from the last stable release.
# If set to "none", this will prevent the downloading of manpages,
# which is useful for individual library targets.
#
gentoo_urls() {
local devspace="HTTP~lv/GCC/URI HTTP~eradicator/gcc/URI HTTP~vapier/dist/URI
HTTP~halcy0n/patches/URI HTTP~zorry/patches/gcc/URI"
devspace=${devspace//HTTP/http:\/\/dev.gentoo.org\/}
echo mirror://gentoo/$1 ${devspace//URI/$1}
}
get_gcc_src_uri() {
export PATCH_GCC_VER=${PATCH_GCC_VER:-${GCC_RELEASE_VER}}
export UCLIBC_GCC_VER=${UCLIBC_GCC_VER:-${PATCH_GCC_VER}}
export PIE_GCC_VER=${PIE_GCC_VER:-${GCC_RELEASE_VER}}
export PP_GCC_VER=${PP_GCC_VER:-${GCC_RELEASE_VER}}
export HTB_GCC_VER=${HTB_GCC_VER:-${GCC_RELEASE_VER}}
export SPECS_GCC_VER=${SPECS_GCC_VER:-${GCC_RELEASE_VER}}
# Set where to download gcc itself depending on whether we're using a
# prerelease, snapshot, or release tarball.
if [[ -n ${PRERELEASE} ]] ; then
GCC_SRC_URI="ftp://gcc.gnu.org/pub/gcc/prerelease-${PRERELEASE}/gcc-${PRERELEASE}.tar.bz2"
elif [[ -n ${SNAPSHOT} ]] ; then
GCC_SRC_URI="ftp://sources.redhat.com/pub/gcc/snapshots/${SNAPSHOT}/gcc-${SNAPSHOT}.tar.bz2"
else
GCC_SRC_URI="mirror://gnu/gcc/gcc-${GCC_PV}/gcc-${GCC_RELEASE_VER}.tar.bz2"
# we want all branch updates to be against the main release
[[ -n ${BRANCH_UPDATE} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${GCC_RELEASE_VER}-branch-update-${BRANCH_UPDATE}.patch.bz2)"
fi
# propolice aka stack smashing protection
if [[ -n ${PP_VER} ]] ; then
if [[ -n ${PP_FVER} ]] ; then
GCC_SRC_URI="${GCC_SRC_URI}
!nossp? (
http://www.research.ibm.com/trl/projects/security/ssp/gcc${PP_VER}/protector-${PP_FVER}.tar.gz
$(gentoo_urls protector-${PP_FVER}.tar.gz)
)"
else
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${PP_GCC_VER}-ssp-${PP_VER}.tar.bz2)"
fi
fi
# uclibc lovin
[[ -n ${UCLIBC_VER} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${UCLIBC_GCC_VER}-uclibc-patches-${UCLIBC_VER}.tar.bz2)"
# PERL cannot be present at bootstrap, and is used to build the man pages.
# So... lets include some pre-generated ones, shall we?
[[ -n ${MAN_VER} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${MAN_VER}-manpages.tar.bz2)"
# various gentoo patches
[[ -n ${PATCH_VER} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${PATCH_GCC_VER}-patches-${PATCH_VER}.tar.bz2)"
# strawberry pie, Cappuccino and a Gauloises (it's a good thing)
[[ -n ${PIE_VER} ]] && \
PIE_CORE=${PIE_CORE:-gcc-${PIE_GCC_VER}-piepatches-v${PIE_VER}.tar.bz2} && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls ${PIE_CORE})"
# gcc minispec for the hardened gcc 4 compiler
[[ -n ${SPECS_VER} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} $(gentoo_urls gcc-${SPECS_GCC_VER}-specs-${SPECS_VER}.tar.bz2)"
# gcc bounds checking patch
if [[ -n ${HTB_VER} ]] ; then
local HTBFILE="bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch.bz2"
GCC_SRC_URI="${GCC_SRC_URI}
boundschecking? (
mirror://sourceforge/boundschecking/${HTBFILE}
$(gentoo_urls ${HTBFILE})
)"
fi
# support for the D language
[[ -n ${D_VER} ]] && \
GCC_SRC_URI="${GCC_SRC_URI} d? ( mirror://sourceforge/dgcc/gdc-${D_VER}-src.tar.bz2 )"
# >= gcc-4.3 uses ecj.jar and we only add gcj as a use flag under certain
# conditions
if [[ ${PN} != "kgcc64" && ${PN} != gcc-* ]] ; then
tc_version_is_at_least "4.3" && \
GCC_SRC_URI="${GCC_SRC_URI}
gcj? ( ftp://sourceware.org/pub/java/ecj-4.3.jar )"
fi
echo "${GCC_SRC_URI}"
}
S=$(gcc_get_s_dir)
SRC_URI=$(get_gcc_src_uri)
#---->> S + SRC_URI essentials >>----
#---->> support checks <<----
# Grab a variable from the build system (taken from linux-info.eclass)
get_make_var() {
local var=$1 makefile=${2:-${WORKDIR}/build/Makefile}
echo -e "e:\\n\\t@echo \$(${var})\\ninclude ${makefile}" | \
r=${makefile%/*} emake --no-print-directory -s -f - 2>/dev/null
}
XGCC() { get_make_var GCC_FOR_TARGET ; }
# The gentoo piessp patches allow for 3 configurations:
# 1) PIE+SSP by default
# 2) PIE by default
# 3) SSP by default
hardened_gcc_works() {
if [[ $1 == "pie" ]] ; then
# $gcc_cv_ld_pie is unreliable as it simply take the output of
# `ld --help | grep -- -pie`, that reports the option in all cases, also if
# the loader doesn't actually load the resulting executables.
# To avoid breakage, blacklist FreeBSD here at least
[[ ${CTARGET} == *-freebsd* ]] && return 1
want_pie || return 1
tc_version_is_at_least 4.3.2 && use nopie && return 1
hardened_gcc_is_stable pie && return 0
if has "~$(tc-arch)" ${ACCEPT_KEYWORDS} ; then
hardened_gcc_check_unsupported pie && return 1
ewarn "Allowing pie-by-default for an unstable arch ($(tc-arch))"
return 0
fi
return 1
elif [[ $1 == "ssp" ]] ; then
want_ssp || return 1
hardened_gcc_is_stable ssp && return 0
if has "~$(tc-arch)" ${ACCEPT_KEYWORDS} ; then
hardened_gcc_check_unsupported ssp && return 1
ewarn "Allowing ssp-by-default for an unstable arch ($(tc-arch))"
return 0
fi
return 1
else
# laziness ;)
hardened_gcc_works pie || return 1
hardened_gcc_works ssp || return 1
return 0
fi
}
hardened_gcc_is_stable() {
if [[ $1 == "pie" ]] ; then
# HARDENED_* variables are deprecated and here for compatibility
local tocheck="${HARDENED_PIE_WORKS} ${HARDENED_GCC_WORKS}"
if [[ ${CTARGET} == *-uclibc* ]] ; then
tocheck="${tocheck} ${PIE_UCLIBC_STABLE}"
else
tocheck="${tocheck} ${PIE_GLIBC_STABLE}"
fi
elif [[ $1 == "ssp" ]] ; then
# ditto
local tocheck="${HARDENED_SSP_WORKS} ${HARDENED_GCC_WORKS}"
if [[ ${CTARGET} == *-uclibc* ]] ; then
tocheck="${tocheck} ${SSP_UCLIBC_STABLE}"
else
tocheck="${tocheck} ${SSP_STABLE}"
fi
else
die "hardened_gcc_stable needs to be called with pie or ssp"
fi
hasq $(tc-arch) ${tocheck} && return 0
return 1
}
hardened_gcc_check_unsupported() {
local tocheck=""
# if a variable is unset, we assume that all archs are unsupported. since
# this function is never called if hardened_gcc_is_stable returns true,
# this shouldn't cause problems... however, allowing this logic to work
# even with the variables unset will break older ebuilds that dont use them.
if [[ $1 == "pie" ]] ; then
if [[ ${CTARGET} == *-uclibc* ]] ; then
[[ -z ${PIE_UCLIBC_UNSUPPORTED} ]] && return 0
tocheck="${tocheck} ${PIE_UCLIBC_UNSUPPORTED}"
else
[[ -z ${PIE_GLIBC_UNSUPPORTED} ]] && return 0
tocheck="${tocheck} ${PIE_GLIBC_UNSUPPORTED}"
fi
elif [[ $1 == "ssp" ]] ; then
if [[ ${CTARGET} == *-uclibc* ]] ; then
[[ -z ${SSP_UCLIBC_UNSUPPORTED} ]] && return 0
tocheck="${tocheck} ${SSP_UCLIBC_UNSUPPORTED}"
else
[[ -z ${SSP_UNSUPPORTED} ]] && return 0
tocheck="${tocheck} ${SSP_UNSUPPORTED}"
fi
else
die "hardened_gcc_check_unsupported needs to be called with pie or ssp"
fi
hasq $(tc-arch) ${tocheck} && return 0
return 1
}
has_libssp() {
[[ -e /$(get_libdir)/libssp.so ]] && return 0
return 1
}
want_libssp() {
[[ ${GCC_LIBSSP_SUPPORT} == "true" ]] || return 1
has_libssp || return 1
[[ -n ${PP_VER} ]] || return 1
return 0
}
_want_stuff() {
local var=$1 flag=$2
[[ -z ${!var} ]] && return 1
use ${flag} && return 0
return 1
}
want_boundschecking() { _want_stuff HTB_VER boundschecking ; }
want_pie() {
if tc_version_is_at_least 4.3.2 ; then
! use hardened && use nopie && [[ -n ${PIE_VER} ]] && return 1
[[ -n ${PIE_VER} ]] && [[ -n ${SPECS_VER} ]] && return 0 || return 1
else
_want_stuff PIE_VER !nopie
fi
}
want_ssp() {
if tc_version_is_at_least 4.3.4 ; then
_want_stuff SPECS_VER !nossp
else
_want_stuff PP_VER !nossp
fi
}
want_split_specs() {
[[ ${SPLIT_SPECS} == "true" ]] && want_pie
}
want_minispecs() {
if tc_version_is_at_least 4.3.2 && use hardened ; then
if ! want_pie ; then
ewarn "PIE_VER or SPECS_VER is not defiend in the GCC ebuild."
elif use vanilla ; then
ewarn "You will not get hardened features if you have the vanilla USE-flag."
elif use nopie && use nossp ; then
ewarn "You will not get hardened features if you have the nopie and nossp USE-flag."
elif ! hardened_gcc_works pie && ! hardened_gcc_works ssp && ! use nopie ; then
ewarn "Your $(tc-arch) arch is not supported."
else
return 0
fi
ewarn "Hope you know what you are doing. Hardened will not work."
return 0
fi
return 1
}
# This function checks whether or not glibc has the support required to build
# Position Independant Executables with gcc.
glibc_have_pie() {
if [[ ! -f ${ROOT}/usr/$(get_libdir)/Scrt1.o ]] ; then
echo
ewarn "Your glibc does not have support for pie, the file Scrt1.o is missing"
ewarn "Please update your glibc to a proper version or disable hardened"
echo
return 1
fi
}
# This function determines whether or not libc has been patched with stack
# smashing protection support.
libc_has_ssp() {
[[ ${ROOT} != "/" ]] && return 0
# lib hacks taken from sandbox configure
echo 'int main(){}' > "${T}"/libctest.c
LC_ALL=C gcc "${T}"/libctest.c -lc -o libctest -Wl,-verbose &> "${T}"/libctest.log || return 1
local libc_file=$(awk '/attempt to open/ { if (($4 ~ /\/libc\.so/) && ($5 == "succeeded")) LIBC = $4; }; END {print LIBC}' "${T}"/libctest.log)
[[ -z ${libc_file} ]] && die "Unable to find a libc !?"
# Check for gcc-4.x style ssp support
if [[ -n $(readelf -s "${libc_file}" 2>/dev/null | \
grep 'FUNC.*GLOBAL.*__stack_chk_fail') ]]
then
return 0
else
# Check for gcc-3.x style ssp support
if [[ -n $(readelf -s "${libc_file}" 2>/dev/null | \
grep 'OBJECT.*GLOBAL.*__guard') ]] && \
[[ -n $(readelf -s "${libc_file}" 2>/dev/null | \
grep 'FUNC.*GLOBAL.*__stack_smash_handler') ]]
then
return 0
elif is_crosscompile ; then
die "'${libc_file}' was detected w/out ssp, that sucks (a lot)"
else
return 1
fi
fi
}
# This is to make sure we don't accidentally try to enable support for a
# language that doesnt exist. GCC 3.4 supports f77, while 4.0 supports f95, etc.
#
# Also add a hook so special ebuilds (kgcc64) can control which languages
# exactly get enabled
gcc-lang-supported() {
grep ^language=\"${1}\" "${S}"/gcc/*/config-lang.in > /dev/null || return 1
[[ -z ${TOOLCHAIN_ALLOWED_LANGS} ]] && return 0
has $1 ${TOOLCHAIN_ALLOWED_LANGS}
}
#----<< support checks >>----
#---->> specs + env.d logic <<----
# defaults to enable for all hardened toolchains
gcc_common_hard="-DEFAULT_RELRO -DEFAULT_BIND_NOW"
# configure to build with the hardened GCC specs as the default
make_gcc_hard() {
if hardened_gcc_works ; then
einfo "Updating gcc to use automatic PIE + SSP building ..."
sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_PIE_SSP ${gcc_common_hard} |" \
-i "${S}"/gcc/Makefile.in || die "Failed to update gcc!"
elif hardened_gcc_works pie ; then
einfo "Updating gcc to use automatic PIE building ..."
ewarn "SSP has not been enabled by default"
sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_PIE ${gcc_common_hard} |" \
-i "${S}"/gcc/Makefile.in || die "Failed to update gcc!"
elif hardened_gcc_works ssp ; then
einfo "Updating gcc to use automatic SSP building ..."
ewarn "PIE has not been enabled by default"
sed -e "s|^HARD_CFLAGS = |HARD_CFLAGS = -DEFAULT_SSP ${gcc_common_hard} |" \
-i "${S}"/gcc/Makefile.in || die "Failed to update gcc!"
else
# do nothing if hardened isnt supported, but dont die either
ewarn "hardened is not supported for this arch in this gcc version"
ebeep
return 0
fi
# rebrand to make bug reports easier
BRANDING_GCC_PKGVERSION=${BRANDING_GCC_PKGVERSION/Gentoo/Gentoo Hardened}
}
# now we generate different spec files so that the user can select a compiler
# that enforces certain features in gcc itself and so we don't have to worry
# about a certain package ignoring CFLAGS/LDFLAGS
_create_specs_file() {
# Usage: _create_specs_file <USE flag> <specs name> <CFLAGS>
local uflag=$1 name=$2 flags=${*:3}
ebegin "Creating a ${name} gcc specs file"
pushd "${WORKDIR}"/build/gcc > /dev/null
if [[ -z ${uflag} ]] || use ${uflag} ; then
# backup the compiler first
cp Makefile Makefile.orig
sed -i -e '/^HARD_CFLAGS/s:=.*:='"${flags}"':' Makefile
mv xgcc xgcc.foo
mv gcc.o gcc.o.foo
emake -s xgcc
$(XGCC) -dumpspecs > "${WORKDIR}"/build/${name}.specs
# restore everything to normal
mv gcc.o.foo gcc.o
mv xgcc.foo xgcc
mv Makefile.orig Makefile
else
$(XGCC) -dumpspecs > "${WORKDIR}"/build/${name}.specs
fi
popd > /dev/null
eend $([[ -s ${WORKDIR}/build/${name}.specs ]] ; echo $?)
}
create_vanilla_specs_file() { _create_specs_file hardened vanilla ; }
create_hardened_specs_file() { _create_specs_file !hardened hardened ${gcc_common_hard} -DEFAULT_PIE_SSP ; }
create_hardenednossp_specs_file() { _create_specs_file "" hardenednossp ${gcc_common_hard} -DEFAULT_PIE ; }
create_hardenednopie_specs_file() { _create_specs_file "" hardenednopie ${gcc_common_hard} -DEFAULT_SSP ; }
create_hardenednopiessp_specs_file() { _create_specs_file "" hardenednopiessp ${gcc_common_hard} ; }
split_out_specs_files() {
local s spec_list="hardenednopiessp vanilla"
if hardened_gcc_works ; then
spec_list="${spec_list} hardened hardenednossp hardenednopie"
elif hardened_gcc_works pie ; then
spec_list="${spec_list} hardenednossp"
elif hardened_gcc_works ssp ; then
spec_list="${spec_list} hardenednopie"
fi
for s in ${spec_list} ; do
create_${s}_specs_file || return 1
done
}
create_gcc_env_entry() {
dodir /etc/env.d/gcc
local gcc_envd_base="/etc/env.d/gcc/${CTARGET}-${GCC_CONFIG_VER}"
if [[ -z $1 ]] ; then
gcc_envd_file="${D}${gcc_envd_base}"
# I'm leaving the following commented out to remind me that it
# was an insanely -bad- idea. Stuff broke. GCC_SPECS isnt unset
# on chroot or in non-toolchain.eclass gcc ebuilds!
#gcc_specs_file="${LIBPATH}/specs"
gcc_specs_file=""
else
gcc_envd_file="${D}${gcc_envd_base}-$1"
gcc_specs_file="${LIBPATH}/$1.specs"
fi
# phase PATH/ROOTPATH out ...
echo "PATH=\"${BINPATH}\"" > ${gcc_envd_file}
echo "ROOTPATH=\"${BINPATH}\"" >> ${gcc_envd_file}
echo "GCC_PATH=\"${BINPATH}\"" >> ${gcc_envd_file}
if use multilib && ! has_multilib_profile; then
LDPATH="${LIBPATH}"
for path in 32 64 ; do
[[ -d ${LIBPATH}/${path} ]] && LDPATH="${LDPATH}:${LIBPATH}/${path}"
done
else
local MULTIDIR
LDPATH="${LIBPATH}"
# We want to list the default ABI's LIBPATH first so libtool
# searches that directory first. This is a temporary
# workaround for libtool being stupid and using .la's from
# conflicting ABIs by using the first one in the search path
local abi=${DEFAULT_ABI}
local MULTIDIR=$($(XGCC) $(get_abi_CFLAGS ${abi}) --print-multi-directory)
if [[ ${MULTIDIR} == "." ]] ; then
LDPATH=${LIBPATH}
else
LDPATH=${LIBPATH}/${MULTIDIR}
fi
for abi in $(get_all_abis) ; do
[[ ${abi} == ${DEFAULT_ABI} ]] && continue
MULTIDIR=$($(XGCC) $(get_abi_CFLAGS ${abi}) --print-multi-directory)
if [[ ${MULTIDIR} == "." ]] ; then
LDPATH=${LDPATH}:${LIBPATH}
else
LDPATH=${LDPATH}:${LIBPATH}/${MULTIDIR}
fi
done
fi
echo "LDPATH=\"${LDPATH}\"" >> ${gcc_envd_file}
echo "MANPATH=\"${DATAPATH}/man\"" >> ${gcc_envd_file}
echo "INFOPATH=\"${DATAPATH}/info\"" >> ${gcc_envd_file}
echo "STDCXX_INCDIR=\"${STDCXX_INCDIR##*/}\"" >> ${gcc_envd_file}
is_crosscompile && echo "CTARGET=${CTARGET}" >> ${gcc_envd_file}
# Set which specs file to use
[[ -n ${gcc_specs_file} ]] && echo "GCC_SPECS=\"${gcc_specs_file}\"" >> ${gcc_envd_file}
}
setup_minispecs_gcc_build_specs() {
# Setup the "build.specs" file for gcc to use when building.
if want_minispecs && ! tc_version_is_at_least 4.4.3 ; then
if hardened_gcc_works pie ; then
cat "${WORKDIR}"/specs/pie.specs >> "${WORKDIR}"/build.specs
fi
if hardened_gcc_works ssp ; then
for s in ssp sspall ; do
cat "${WORKDIR}"/specs/${s}.specs >> "${WORKDIR}"/build.specs
done
fi
for s in nostrict znow ; do
cat "${WORKDIR}"/specs/${s}.specs >> "${WORKDIR}"/build.specs
done
export GCC_SPECS="${WORKDIR}"/build.specs
fi
}
copy_minispecs_gcc_specs() {
# Build system specs file which, if it exists, must be a complete set of
# specs as it completely and unconditionally overrides the builtin specs.
# For gcc 4
if want_minispecs ; then
insinto ${LIBPATH}
if ! tc_version_is_at_least 4.4.3 ; then
$(XGCC) -dumpspecs > "${WORKDIR}"/specs/specs
cat "${WORKDIR}"/build.specs >> "${WORKDIR}"/specs/specs
doins "${WORKDIR}"/specs/specs || die "failed to install specs"
fi
doins "${WORKDIR}"/specs/*.specs || die "failed to install specs"
fi
}
add_profile_eselect_conf() {
local compiler_config_file=$1
local abi=$2
local specs=$3
local gcc_specs_file
local var
if [[ -z ${specs} ]] ; then
# I'm leaving the following commented out to remind me that it
# was an insanely -bad- idea. Stuff broke. GCC_SPECS isnt unset
# on chroot or in non-toolchain.eclass gcc ebuilds!
#gcc_specs_file="${LIBPATH}/specs"
gcc_specs_file=""
if use hardened ; then
specs="hardened"
else
specs="vanilla"
fi
else
gcc_specs_file="${LIBPATH}/${specs}.specs"
fi
echo >> ${compiler_config_file}
if ! is_multilib ; then
echo "[${specs}]" >> ${compiler_config_file}
echo " ctarget=${CTARGET}" >> ${compiler_config_file}
else
echo "[${abi}-${specs}]" >> ${compiler_config_file}
var="CTARGET_${abi}"
if [[ -n ${!var} ]] ; then
echo " ctarget=${!var}" >> ${compiler_config_file}
else
var="CHOST_${abi}"
if [[ -n ${!var} ]] ; then
echo " ctarget=${!var}" >> ${compiler_config_file}
else
echo " ctarget=${CTARGET}" >> ${compiler_config_file}
fi
fi
fi
local MULTIDIR=$($(XGCC) $(get_abi_CFLAGS ${abi}) --print-multi-directory)
local LDPATH=${LIBPATH}
if [[ ${MULTIDIR} != "." ]] ; then
LDPATH="${LIBPATH}/${MULTIDIR}"
fi
echo " ldpath=${LDPATH}" >> ${compiler_config_file}
if [[ -n ${gcc_specs_file} ]] ; then
echo " specs=${gcc_specs_file}" >> ${compiler_config_file}
fi
var="CFLAGS_${abi}"
if [[ -n ${!var} ]] ; then
echo " cflags=${!var}" >> ${compiler_config_file}
fi
}
create_eselect_conf() {
local config_dir="/etc/eselect/compiler"
local compiler_config_file="${D}/${config_dir}/${CTARGET}-${GCC_CONFIG_VER}.conf"
local abi
dodir ${config_dir}
echo "[global]" > ${compiler_config_file}
echo " version=${CTARGET}-${GCC_CONFIG_VER}" >> ${compiler_config_file}
echo " binpath=${BINPATH}" >> ${compiler_config_file}
echo " manpath=${DATAPATH}/man" >> ${compiler_config_file}
echo " infopath=${DATAPATH}/info" >> ${compiler_config_file}
echo " alias_cc=gcc" >> ${compiler_config_file}
echo " stdcxx_incdir=${STDCXX_INCDIR##*/}" >> ${compiler_config_file}
echo " bin_prefix=${CTARGET}" >> ${compiler_config_file}
# Per spyderous, it is best not to alias the fortran compilers
#if [[ -x "${D}/${BINPATH}/${CTARGET}-g77" ]] ; then
# echo " alias_gfortran=g77" >> ${compiler_config_file}
#elif [[ -x "${D}/${BINPATH}/${CTARGET}-gfortran" ]] ; then
# echo " alias_g77=gfortran" >> ${compiler_config_file}
#fi
for abi in $(get_all_abis) ; do
add_profile_eselect_conf "${compiler_config_file}" "${abi}"
if want_split_specs ; then
if use hardened ; then
add_profile_eselect_conf "${compiler_config_file}" "${abi}" vanilla
elif hardened_gcc_works ; then
add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardened
fi
if hardened_gcc_works || hardened_gcc_works pie ; then
add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednossp
fi
if hardened_gcc_works || hardened_gcc_works ssp ; then
add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednopie
fi
add_profile_eselect_conf "${compiler_config_file}" "${abi}" hardenednopiessp
fi
done
}
#----<< specs + env.d logic >>----
#---->> pkg_* <<----
gcc_pkg_setup() {
[[ -z ${ETYPE} ]] && die "Your ebuild needs to set the ETYPE variable"
if [[ ( $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ) && ( ${LD_PRELOAD} == "/lib/libsandbox.so" || ${LD_PRELOAD} == "/usr/lib/libsandbox.so" ) ]] && is_multilib ; then
eerror "Sandbox in your installed portage does not support compilation."
eerror "of a multilib gcc. Please set FEATURES=-sandbox and try again."
eerror "After you have a multilib gcc, re-emerge portage to have a working sandbox."
die "No 32bit sandbox. Retry with FEATURES=-sandbox."
fi
if [[ ${ETYPE} == "gcc-compiler" ]] ; then
case $(tc-arch) in
mips)
# Must compile for mips64-linux target if we want n32/n64 support
case "${CTARGET}" in
mips64*) ;;
*)
if use n32 || use n64; then
eerror "n32/n64 can only be used when target host is mips64*-*-linux-*";
die "Invalid USE flags for CTARGET ($CTARGET)";
fi
;;
esac
#cannot have both n32 & n64 without multilib
if use n32 && use n64 && ! is_multilib; then
eerror "Please enable multilib if you want to use both n32 & n64";
die "Invalid USE flag combination";
fi
;;
esac
# Setup variables which would normally be in the profile
if is_crosscompile ; then
multilib_env ${CTARGET}
if ! use multilib ; then
MULTILIB_ABIS=${DEFAULT_ABI}
fi
fi
# we dont want to use the installed compiler's specs to build gcc!
unset GCC_SPECS
fi
want_libssp && libc_has_ssp && \
die "libssp cannot be used with a glibc that has been patched to provide ssp symbols"
want_minispecs
unset LANGUAGES #265283
}
gcc-compiler_pkg_preinst() {
:
}
gcc-compiler_pkg_postinst() {
if has_version 'app-admin/eselect-compiler' ; then
do_eselect_compiler
else
do_gcc_config
fi
if ! is_crosscompile ; then
echo
ewarn "If you have issues with packages unable to locate libstdc++.la,"
ewarn "then try running 'fix_libtool_files.sh' on the old gcc versions."
echo
fi
# If our gcc-config version doesn't like '-' in it's version string,
# tell our users that gcc-config will yell at them, but it's all good.
if ! has_version '>=sys-devel/gcc-config-1.3.10-r1' && [[ ${GCC_CONFIG_VER/-/} != ${GCC_CONFIG_VER} ]] ; then
ewarn "Your version of gcc-config will issue about having an invalid profile"
ewarn "when switching to this profile. It is safe to ignore this warning,"
ewarn "and this problem has been corrected in >=sys-devel/gcc-config-1.3.10-r1."
fi
if ! is_crosscompile && ! use multislot && [[ ${GCCMAJOR}.${GCCMINOR} == 3.4 ]] ; then
echo
ewarn "You should make sure to rebuild all your C++ packages when"
ewarn "upgrading between different versions of gcc. For example,"
ewarn "when moving to gcc-3.4 from gcc-3.3, emerge gentoolkit and run:"
ewarn " # revdep-rebuild --library libstdc++.so.5"
echo
ewarn "For more information on the steps to take when upgrading "
ewarn "from gcc-3.3 please refer to: "
ewarn "http://www.gentoo.org/doc/en/gcc-upgrading.xml"
echo
fi
if ! is_crosscompile ; then
# hack to prevent collisions between SLOT
[[ ! -d ${ROOT}/lib/rcscripts/awk ]] \
&& mkdir -p "${ROOT}"/lib/rcscripts/awk
[[ ! -d ${ROOT}/sbin ]] \
&& mkdir -p "${ROOT}"/sbin
cp "${ROOT}/${DATAPATH}"/fixlafiles.awk "${ROOT}"/lib/rcscripts/awk/ || die "installing fixlafiles.awk"
cp "${ROOT}/${DATAPATH}"/fix_libtool_files.sh "${ROOT}"/sbin/ || die "installing fix_libtool_files.sh"
[[ ! -d ${ROOT}/usr/bin ]] \
&& mkdir -p "${ROOT}"/usr/bin
# Since these aren't critical files and portage sucks with
# handling of binpkgs, don't require these to be found
for x in "${ROOT}/${DATAPATH}"/c{89,99} ; do
if [[ -e ${x} ]]; then
cp ${x} "${ROOT}"/usr/bin/ || die "installing c89/c99"
fi
done
fi
}
gcc-compiler_pkg_prerm() {
# Don't let these files be uninstalled #87647
touch -c "${ROOT}"/sbin/fix_libtool_files.sh \
"${ROOT}"/lib/rcscripts/awk/fixlafiles.awk
}
gcc-compiler_pkg_postrm() {
# to make our lives easier (and saner), we do the fix_libtool stuff here.
# rather than checking SLOT's and trying in upgrade paths, we just see if
# the common libstdc++.la exists in the ${LIBPATH} of the gcc that we are
# unmerging. if it does, that means this was a simple re-emerge.
# clean up the cruft left behind by cross-compilers
if is_crosscompile ; then
if [[ -z $(ls "${ROOT}"/etc/env.d/gcc/${CTARGET}* 2>/dev/null) ]] ; then
rm -f "${ROOT}"/etc/env.d/gcc/config-${CTARGET}
rm -f "${ROOT}"/etc/env.d/??gcc-${CTARGET}
rm -f "${ROOT}"/usr/bin/${CTARGET}-{gcc,{g,c}++}{,32,64}
fi
return 0
fi
# ROOT isnt handled by the script
[[ ${ROOT} != "/" ]] && return 0
if [[ ! -e ${LIBPATH}/libstdc++.so ]] ; then
# make sure the profile is sane during same-slot upgrade #289403
do_gcc_config
einfo "Running 'fix_libtool_files.sh ${GCC_RELEASE_VER}'"
/sbin/fix_libtool_files.sh ${GCC_RELEASE_VER}
if [[ -n ${BRANCH_UPDATE} ]] ; then
einfo "Running 'fix_libtool_files.sh ${GCC_RELEASE_VER}-${BRANCH_UPDATE}'"
/sbin/fix_libtool_files.sh ${GCC_RELEASE_VER}-${BRANCH_UPDATE}
fi
fi
return 0
}
#---->> pkg_* <<----
#---->> src_* <<----
# generic GCC src_unpack, to be called from the ebuild's src_unpack.
# BIG NOTE regarding hardened support: ebuilds with support for hardened are
# expected to export the following variable:
#
# HARDENED_GCC_WORKS
# This variable should be set to the archs on which hardened should
# be allowed. For example: HARDENED_GCC_WORKS="x86 sparc amd64"
# This allows for additional archs to be supported by hardened when
# ready.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc-compiler_src_unpack() {
# fail if using pie patches, building hardened, and glibc doesnt have
# the necessary support
want_pie && use hardened && glibc_have_pie
if use hardened && ! want_minispecs ; then
einfo "updating configuration to build hardened GCC"
make_gcc_hard || die "failed to make gcc hard"
fi
# Rebrand to make bug reports easier
want_minispecs && BRANDING_GCC_PKGVERSION=${BRANDING_GCC_PKGVERSION/Gentoo/Gentoo Hardened}
if is_libffi ; then
# move the libffi target out of gcj and into all
sed -i \
-e '/^libgcj=/s:target-libffi::' \
-e '/^target_lib/s:=":="target-libffi :' \
"${S}"/configure || die
fi
}
gcc-library_src_unpack() {
:
}
guess_patch_type_in_dir() {
[[ -n $(ls "$1"/*.bz2 2>/dev/null) ]] \
&& EPATCH_SUFFIX="patch.bz2" \
|| EPATCH_SUFFIX="patch"
}
do_gcc_rename_java_bins() {
# bug #139918 - conflict between gcc and java-config-2 for ownership of
# /usr/bin/rmi{c,registry}. Done with mv & sed rather than a patch
# because patches would be large (thanks to the rename of man files),
# and it's clear from the sed invocations that all that changes is the
# rmi{c,registry} names to grmi{c,registry} names.
# Kevin F. Quinn 2006-07-12
einfo "Renaming jdk executables rmic and rmiregistry to grmic and grmiregistry."
# 1) Move the man files if present (missing prior to gcc-3.4)
for manfile in rmic rmiregistry; do
[[ -f ${S}/gcc/doc/${manfile}.1 ]] || continue
mv "${S}"/gcc/doc/${manfile}.1 "${S}"/gcc/doc/g${manfile}.1
done
# 2) Fixup references in the docs if present (mission prior to gcc-3.4)
for jfile in gcc/doc/gcj.info gcc/doc/grmic.1 gcc/doc/grmiregistry.1 gcc/java/gcj.texi; do
[[ -f ${S}/${jfile} ]] || continue
sed -i -e 's:rmiregistry:grmiregistry:g' "${S}"/${jfile} ||
die "Failed to fixup file ${jfile} for rename to grmiregistry"
sed -i -e 's:rmic:grmic:g' "${S}"/${jfile} ||
die "Failed to fixup file ${jfile} for rename to grmic"
done
# 3) Fixup Makefiles to build the changed executable names
# These are present in all 3.x versions, and are the important bit
# to get gcc to build with the new names.
for jfile in libjava/Makefile.am libjava/Makefile.in gcc/java/Make-lang.in; do
sed -i -e 's:rmiregistry:grmiregistry:g' "${S}"/${jfile} ||
die "Failed to fixup file ${jfile} for rename to grmiregistry"
# Careful with rmic on these files; it's also the name of a directory
# which should be left unchanged. Replace occurrences of 'rmic$',
# 'rmic_' and 'rmic '.
sed -i -e 's:rmic\([$_ ]\):grmic\1:g' "${S}"/${jfile} ||
die "Failed to fixup file ${jfile} for rename to grmic"
done
}
gcc_src_unpack() {
export BRANDING_GCC_PKGVERSION="Gentoo ${GCC_PVR}"
[[ -z ${UCLIBC_VER} ]] && [[ ${CTARGET} == *-uclibc* ]] && die "Sorry, this version does not support uClibc"
gcc_quick_unpack
exclude_gcc_patches
cd "${S}"
if ! use vanilla ; then
if [[ -n ${PATCH_VER} ]] ; then
guess_patch_type_in_dir "${WORKDIR}"/patch
EPATCH_MULTI_MSG="Applying Gentoo patches ..." \
epatch "${WORKDIR}"/patch
BRANDING_GCC_PKGVERSION="${BRANDING_GCC_PKGVERSION} p${PATCH_VER}"
fi
if [[ -n ${UCLIBC_VER} ]] ; then
guess_patch_type_in_dir "${WORKDIR}"/uclibc
EPATCH_MULTI_MSG="Applying uClibc patches ..." \
epatch "${WORKDIR}"/uclibc
fi
fi
do_gcc_HTB_patches
do_gcc_SSP_patches
do_gcc_PIE_patches
epatch_user
${ETYPE}_src_unpack || die "failed to ${ETYPE}_src_unpack"
# protoize don't build on FreeBSD, skip it
## removed in 4.5, bug #270558 --de.
if [[ ${GCCMAJOR}.${GCCMINOR} < 4.5 ]]; then
if ! is_crosscompile && ! use elibc_FreeBSD ; then
# enable protoize / unprotoize
sed -i -e '/^LANGUAGES =/s:$: proto:' "${S}"/gcc/Makefile.in
fi
fi
fix_files=""
for x in contrib/test_summary libstdc++-v3/scripts/check_survey.in ; do
[[ -e ${x} ]] && fix_files="${fix_files} ${x}"
done
ht_fix_file ${fix_files} */configure *.sh */Makefile.in
if ! is_crosscompile && is_multilib && \
[[ ( $(tc-arch) == "amd64" || $(tc-arch) == "ppc64" ) && -z ${SKIP_MULTILIB_HACK} ]] ; then
disgusting_gcc_multilib_HACK || die "multilib hack failed"
fi
gcc_version_patch
if [[ ${GCCMAJOR}.${GCCMINOR} > 4.0 ]] ; then
if [[ -n ${SNAPSHOT} || -n ${PRERELEASE} ]] ; then
echo ${PV/_/-} > "${S}"/gcc/BASE-VER
fi
fi
# >= gcc-4.3 doesn't bundle ecj.jar, so copy it
if [[ ${GCCMAJOR}.${GCCMINOR} > 4.2 ]] &&
use gcj ; then
cp -pPR "${DISTDIR}/ecj-4.3.jar" "${S}/ecj.jar" || die
fi
# disable --as-needed from being compiled into gcc specs
# natively when using a gcc version < 3.4.4
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=14992
if ! tc_version_is_at_least 3.4.4 ; then
sed -i -e s/HAVE_LD_AS_NEEDED/USE_LD_AS_NEEDED/g "${S}"/gcc/config.in
fi
# In gcc 3.3.x and 3.4.x, rename the java bins to gcc-specific names
# in line with gcc-4.
if [[ ${GCCMAJOR} == 3 ]] &&
[[ ${GCCMINOR} -ge 3 ]]
then
do_gcc_rename_java_bins
fi
# Fixup libtool to correctly generate .la files with portage
cd "${S}"
elibtoolize --portage --shallow --no-uclibc
gnuconfig_update
# update configure files
local f
einfo "Fixing misc issues in configure files"
tc_version_is_at_least 4.1 && epatch "${GCC_FILESDIR}"/gcc-configure-texinfo.patch
for f in $(grep -l 'autoconf version 2.13' $(find "${S}" -name configure)) ; do
ebegin " Updating ${f/${S}\/} [LANG]"
patch "${f}" "${GCC_FILESDIR}"/gcc-configure-LANG.patch >& "${T}"/configure-patch.log \
|| eerror "Please file a bug about this"
eend $?
done
sed -i 's|A-Za-z0-9|[:alnum:]|g' "${S}"/gcc/*.awk #215828
if [[ -x contrib/gcc_update ]] ; then
einfo "Touching generated files"
./contrib/gcc_update --touch | \
while read f ; do
einfo " ${f%%...}"
done
fi
disable_multilib_libjava || die "failed to disable multilib java"
}
gcc-library-configure() {
# multilib support
[[ ${GCC_TARGET_NO_MULTILIB} == "true" ]] \
&& confgcc="${confgcc} --disable-multilib" \
|| confgcc="${confgcc} --enable-multilib"
}
gcc-compiler-configure() {
# multilib support
if is_multilib ; then
confgcc="${confgcc} --enable-multilib"
elif [[ ${CTARGET} == *-linux* ]] ; then
confgcc="${confgcc} --disable-multilib"
fi
if tc_version_is_at_least "4.0" ; then
if has mudflap ${IUSE} ; then
confgcc="${confgcc} $(use_enable mudflap libmudflap)"
else
confgcc="${confgcc} --disable-libmudflap"
fi
if want_libssp ; then
confgcc="${confgcc} --enable-libssp"
else
export gcc_cv_libc_provides_ssp=yes
confgcc="${confgcc} --disable-libssp"
fi
# If we want hardened support with the newer pie-patchset for >=gcc 4.4.3
if tc_version_is_at_least 4.4.3 && want_minispecs && ! use vanilla ; then
if hardened_gcc_works ; then
confgcc="${confgcc} --enable-esp=all"
elif ! hardened_gcc_works pie && hardened_gcc_works ssp ; then
confgcc="${confgcc} --enable-esp=nopie"
elif ! hardened_gcc_works ssp && hardened_gcc_works pie ; then
confgcc="${confgcc} --enable-esp=nossp"
else
confgcc="${confgcc} --disable-esp"
fi
fi
if tc_version_is_at_least "4.2" ; then
confgcc="${confgcc} $(use_enable openmp libgomp)"
fi
# enable the cld workaround until we move things to stable.
# by that point, the rest of the software out there should
# have caught up.
if tc_version_is_at_least "4.3" ; then
if ! has ${ARCH} ${KEYWORDS} ; then
confgcc="${confgcc} --enable-cld"
fi
fi
# Stick the python scripts in their own slotted directory
# bug #279252
if tc_version_is_at_least "4.4" ; then
confgcc="${confgcc} --with-python-dir=${DATAPATH/$PREFIX/}/python"
fi
fi
# GTK+ is preferred over xlib in 3.4.x (xlib is unmaintained
# right now). Much thanks to <csm@gnu.org> for the heads up.
# Travis Tilley <lv@gentoo.org> (11 Jul 2004)
if ! is_gcj ; then
confgcc="${confgcc} --disable-libgcj"
elif use gtk ; then
confgcc="${confgcc} --enable-java-awt=gtk"
fi
case $(tc-arch) in
arm) #264534
local arm_arch="${CTARGET%%-*}"
# Only do this if arm_arch is armv*
if [[ ${arm_arch} == armv* ]] ; then
# Convert armv7{a,r,m} to armv7-{a,r,m}
[[ ${arm_arch} == armv7? ]] && arm_arch=${arm_arch/7/7-}
# Remove endian ('l' / 'eb')
[[ ${arm_arch} == *l ]] && arm_arch=${arm_arch%l}
[[ ${arm_arch} == *eb ]] && arm_arch=${arm_arch%eb}
confgcc="${confgcc} --with-arch=${arm_arch}"
fi
# Enable hardvfp
if [[ ${CTARGET##*-} == *eabi ]] && [[ $(tc-is-hardfloat) == yes ]] && \
tc_version_is_at_least "4.5" ; then
confgcc="${confgcc} --with-float=hard"
fi
;;
# Add --with-abi flags to set default MIPS ABI
mips)
local mips_abi=""
use n64 && mips_abi="--with-abi=64"
use n32 && mips_abi="--with-abi=n32"
[[ -n ${mips_abi} ]] && confgcc="${confgcc} ${mips_abi}"
;;
# Default arch for x86 is normally i386, lets give it a bump
# since glibc will do so based on CTARGET anyways
x86)
confgcc="${confgcc} --with-arch=${CTARGET%%-*}"
;;
# Enable sjlj exceptions for backward compatibility on hppa
hppa)
[[ ${GCCMAJOR} == "3" ]] && confgcc="${confgcc} --enable-sjlj-exceptions"
;;
esac
GCC_LANG="c"
is_cxx && GCC_LANG="${GCC_LANG},c++"
is_d && GCC_LANG="${GCC_LANG},d"
is_gcj && GCC_LANG="${GCC_LANG},java"
if is_objc || is_objcxx ; then
GCC_LANG="${GCC_LANG},objc"
if tc_version_is_at_least "4.0" ; then
use objc-gc && confgcc="${confgcc} --enable-objc-gc"
fi
is_objcxx && GCC_LANG="${GCC_LANG},obj-c++"
fi
is_treelang && GCC_LANG="${GCC_LANG},treelang"
# fortran support just got sillier! the lang value can be f77 for
# fortran77, f95 for fortran95, or just plain old fortran for the
# currently supported standard depending on gcc version.
is_fortran && GCC_LANG="${GCC_LANG},fortran"
is_f77 && GCC_LANG="${GCC_LANG},f77"
is_f95 && GCC_LANG="${GCC_LANG},f95"
# We do NOT want 'ADA support' in here!
# is_ada && GCC_LANG="${GCC_LANG},ada"
einfo "configuring for GCC_LANG: ${GCC_LANG}"
}
# Other than the variables described for gcc_setup_variables, the following
# will alter tha behavior of gcc_do_configure:
#
# CTARGET
# CBUILD
# Enable building for a target that differs from CHOST
#
# GCC_TARGET_NO_MULTILIB
# Disable multilib. Useful when building single library targets.
#
# GCC_LANG
# Enable support for ${GCC_LANG} languages. defaults to just "c"
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_configure() {
local confgcc
# Set configuration based on path variables
confgcc="${confgcc} \
--prefix=${PREFIX} \
--bindir=${BINPATH} \
--includedir=${INCLUDEPATH} \
--datadir=${DATAPATH} \
--mandir=${DATAPATH}/man \
--infodir=${DATAPATH}/info \
--with-gxx-include-dir=${STDCXX_INCDIR}"
# On Darwin we need libdir to be set in order to get correct install names
# for things like libobjc-gnu, libgcj and libfortran. If we enable it on
# non-Darwin we screw up the behaviour this eclass relies on. We in
# particular need this over --libdir for bug #255315.
[[ ${CHOST} == *-darwin* ]] && \
confgcc="${confgcc} --enable-version-specific-runtime-libs"
# All our cross-compile logic goes here ! woo !
confgcc="${confgcc} --host=${CHOST}"
if is_crosscompile || tc-is-cross-compiler ; then
# Straight from the GCC install doc:
# "GCC has code to correctly determine the correct value for target
# for nearly all native systems. Therefore, we highly recommend you
# not provide a configure target when configuring a native compiler."
confgcc="${confgcc} --target=${CTARGET}"
fi
[[ -n ${CBUILD} ]] && confgcc="${confgcc} --build=${CBUILD}"
# ppc altivec support
confgcc="${confgcc} $(use_enable altivec)"
# gcc has fixed-point arithmetic support in 4.3 for mips targets that can
# significantly increase compile time by several hours. This will allow
# users to control this feature in the event they need the support.
tc_version_is_at_least "4.3" && confgcc="${confgcc} $(use_enable fixed-point)"
# graphite support was added in 4.4, which depends upon external libraries
# for optimizations. This option allows users to determine if they want
# these optimizations and libraries pulled in
tc_version_is_at_least "4.4" && \
confgcc="${confgcc} $(use_with graphite ppl) $(use_with graphite cloog)"
# lto support was added in 4.5, which depends upon elfutils. This allows
# users to enable that option, and pull in the additional library
tc_version_is_at_least "4.5" && \
confgcc="${confgcc} $(use_enable lto)"
[[ $(tc-is-softfloat) == "yes" ]] && confgcc="${confgcc} --with-float=soft"
[[ $(tc-is-hardfloat) == "yes" ]] && confgcc="${confgcc} --with-float=hard"
# Native Language Support
if use nls ; then
confgcc="${confgcc} --enable-nls --without-included-gettext"
else
confgcc="${confgcc} --disable-nls"
fi
# reasonably sane globals (hopefully)
confgcc="${confgcc} \
--with-system-zlib \
--disable-checking \
--disable-werror \
--enable-secureplt"
# etype specific configuration
einfo "running ${ETYPE}-configure"
${ETYPE}-configure || die
# if not specified, assume we are building for a target that only
# requires C support
GCC_LANG=${GCC_LANG:-c}
confgcc="${confgcc} --enable-languages=${GCC_LANG}"
if is_crosscompile ; then
# When building a stage1 cross-compiler (just C compiler), we have to
# disable a bunch of features or gcc goes boom
local needed_libc=""
case ${CTARGET} in
*-linux) needed_libc=no-fucking-clue;;
*-dietlibc) needed_libc=dietlibc;;
*-elf) needed_libc=newlib;;
*-freebsd*) needed_libc=freebsd-lib;;
*-gnu*) needed_libc=glibc;;
*-klibc) needed_libc=klibc;;
*-uclibc*) needed_libc=uclibc;;
*-cygwin) needed_libc=cygwin;;
mingw*|*-mingw*) needed_libc=mingw-runtime;;
avr) confgcc="${confgcc} --enable-shared --disable-threads";;
esac
if [[ -n ${needed_libc} ]] ; then
if ! has_version ${CATEGORY}/${needed_libc} ; then
confgcc="${confgcc} --disable-shared --disable-threads --without-headers"
elif built_with_use --hidden --missing false ${CATEGORY}/${needed_libc} crosscompile_opts_headers-only ; then
confgcc="${confgcc} --disable-shared --with-sysroot=${PREFIX}/${CTARGET}"
else
confgcc="${confgcc} --with-sysroot=${PREFIX}/${CTARGET}"
fi
fi
if [[ ${GCCMAJOR}.${GCCMINOR} > 4.1 ]] ; then
confgcc="${confgcc} --disable-bootstrap --disable-libgomp"
fi
elif [[ ${CHOST} == mingw* ]] || [[ ${CHOST} == *-mingw* ]] || [[ ${CHOST} == *-cygwin ]] ; then
confgcc="${confgcc} --enable-shared --enable-threads=win32"
else
confgcc="${confgcc} --enable-shared --enable-threads=posix"
fi
[[ ${CTARGET} == *-elf ]] && confgcc="${confgcc} --with-newlib"
# __cxa_atexit is "essential for fully standards-compliant handling of
# destructors", but apparently requires glibc.
if [[ ${CTARGET} == *-uclibc* ]] ; then
confgcc="${confgcc} --disable-__cxa_atexit --enable-target-optspace $(use_enable nptl tls)"
[[ ${GCCMAJOR}.${GCCMINOR} == 3.3 ]] && confgcc="${confgcc} --enable-sjlj-exceptions"
if tc_version_is_at_least 3.4 && [[ ${GCCMAJOR}.${GCCMINOR} < 4.3 ]] ; then
confgcc="${confgcc} --enable-clocale=uclibc"
fi
elif [[ ${CTARGET} == *-gnu* ]] ; then
confgcc="${confgcc} --enable-__cxa_atexit"
confgcc="${confgcc} --enable-clocale=gnu"
elif [[ ${CTARGET} == *-freebsd* ]]; then
confgcc="${confgcc} --enable-__cxa_atexit"
elif [[ ${CTARGET} == *-solaris* ]]; then
confgcc="${confgcc} --enable-__cxa_atexit"
fi
[[ ${GCCMAJOR}.${GCCMINOR} < 3.4 ]] && confgcc="${confgcc} --disable-libunwind-exceptions"
# create a sparc*linux*-{gcc,g++} that can handle -m32 and -m64 (biarch)
if [[ ${CTARGET} == sparc*linux* ]] \
&& is_multilib \
&& ! is_crosscompile \
&& [[ ${GCCMAJOR}.${GCCMINOR} > 4.2 ]]
then
confgcc="${confgcc} --enable-targets=all"
fi
tc_version_is_at_least 4.3 && set -- "$@" \
--with-bugurl=http://bugs.gentoo.org/ \
--with-pkgversion="${BRANDING_GCC_PKGVERSION}"
set -- ${confgcc} "$@" ${EXTRA_ECONF}
# Nothing wrong with a good dose of verbosity
echo
einfo "PREFIX: ${PREFIX}"
einfo "BINPATH: ${BINPATH}"
einfo "LIBPATH: ${LIBPATH}"
einfo "DATAPATH: ${DATAPATH}"
einfo "STDCXX_INCDIR: ${STDCXX_INCDIR}"
echo
einfo "Configuring GCC with: ${@//--/\n\t--}"
echo
# Build in a separate build tree
mkdir -p "${WORKDIR}"/build
pushd "${WORKDIR}"/build > /dev/null
# and now to do the actual configuration
addwrite /dev/zero
echo "${S}"/configure "$@"
"${S}"/configure "$@" || die "failed to run configure"
# return to whatever directory we were in before
popd > /dev/null
}
# This function accepts one optional argument, the make target to be used.
# If ommitted, gcc_do_make will try to guess whether it should use all,
# profiledbootstrap, or bootstrap-lean depending on CTARGET and arch. An
# example of how to use this function:
#
# gcc_do_make all-target-libstdc++-v3
#
# In addition to the target to be used, the following variables alter the
# behavior of this function:
#
# LDFLAGS
# Flags to pass to ld
#
# STAGE1_CFLAGS
# CFLAGS to use during stage1 of a gcc bootstrap
#
# BOOT_CFLAGS
# CFLAGS to use during stages 2+3 of a gcc bootstrap.
#
# Travis Tilley <lv@gentoo.org> (04 Sep 2004)
#
gcc_do_make() {
# Fix for libtool-portage.patch
local OLDS=${S}
S=${WORKDIR}/build
# Set make target to $1 if passed
[[ -n $1 ]] && GCC_MAKE_TARGET=$1
# default target
if is_crosscompile || tc-is-cross-compiler ; then
# 3 stage bootstrapping doesnt quite work when you cant run the
# resulting binaries natively ^^;
GCC_MAKE_TARGET=${GCC_MAKE_TARGET-all}
else
GCC_MAKE_TARGET=${GCC_MAKE_TARGET-bootstrap-lean}
fi
# the gcc docs state that parallel make isnt supported for the
# profiledbootstrap target, as collisions in profile collecting may occur.
[[ ${GCC_MAKE_TARGET} == "profiledbootstrap" ]] && export MAKEOPTS="${MAKEOPTS} -j1"
# boundschecking seems to introduce parallel build issues
want_boundschecking && export MAKEOPTS="${MAKEOPTS} -j1"
if [[ ${GCC_MAKE_TARGET} == "all" ]] ; then
STAGE1_CFLAGS=${STAGE1_CFLAGS-"${CFLAGS}"}
elif [[ $(gcc-version) == "3.4" && ${GCC_BRANCH_VER} == "3.4" ]] && gcc-specs-ssp ; then
# See bug #79852
STAGE1_CFLAGS=${STAGE1_CFLAGS-"-O2"}
else
STAGE1_CFLAGS=${STAGE1_CFLAGS-"-O"}
fi
if is_crosscompile; then
# In 3.4, BOOT_CFLAGS is never used on a crosscompile...
# but I'll leave this in anyways as someone might have had
# some reason for putting it in here... --eradicator
BOOT_CFLAGS=${BOOT_CFLAGS-"-O2"}
else
# we only want to use the system's CFLAGS if not building a
# cross-compiler.
BOOT_CFLAGS=${BOOT_CFLAGS-"$(get_abi_CFLAGS) ${CFLAGS}"}
fi
pushd "${WORKDIR}"/build
emake \
LDFLAGS="${LDFLAGS}" \
STAGE1_CFLAGS="${STAGE1_CFLAGS}" \
LIBPATH="${LIBPATH}" \
BOOT_CFLAGS="${BOOT_CFLAGS}" \
${GCC_MAKE_TARGET} \
|| die "emake failed with ${GCC_MAKE_TARGET}"
if ! is_crosscompile && ! use nocxx && use doc ; then
if type -p doxygen > /dev/null ; then
if tc_version_is_at_least 4.3 ; then
cd "${CTARGET}"/libstdc++-v3/doc
emake doc-man-doxygen || ewarn "failed to make docs"
elif tc_version_is_at_least 3.0 ; then
cd "${CTARGET}"/libstdc++-v3
emake doxygen-man || ewarn "failed to make docs"
fi
else
ewarn "Skipping libstdc++ manpage generation since you don't have doxygen installed"
fi
fi
popd
}
# This function will add ${GCC_CONFIG_VER} to the names of all shared libraries in the
# directory specified to avoid filename collisions between multiple slotted
# non-versioned gcc targets. If no directory is specified, it is assumed that
# you want -all- shared objects to have ${GCC_CONFIG_VER} added. Example
#
# add_version_to_shared ${D}/usr/$(get_libdir)
#
# Travis Tilley <lv@gentoo.org> (05 Sep 2004)
#
add_version_to_shared() {
local sharedlib sharedlibdir
[[ -z $1 ]] \
&& sharedlibdir=${D} \
|| sharedlibdir=$1
for sharedlib in $(find ${sharedlibdir} -name *.so.*) ; do
if [[ ! -L ${sharedlib} ]] ; then
einfo "Renaming `basename "${sharedlib}"` to `basename "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}"`"
mv "${sharedlib}" "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}" \
|| die
pushd `dirname "${sharedlib}"` > /dev/null || die
ln -sf "`basename "${sharedlib/.so*/}-${GCC_CONFIG_VER}.so.${sharedlib/*.so./}"`" \
"`basename "${sharedlib}"`" || die
popd > /dev/null || die
fi
done
}
# This is mostly a stub function to be overwritten in an ebuild
gcc_do_filter_flags() {
strip-flags
# In general gcc does not like optimization, and add -O2 where
# it is safe. This is especially true for gcc 3.3 + 3.4
replace-flags -O? -O2
# ... sure, why not?
strip-unsupported-flags
# dont want to funk ourselves
filter-flags '-mabi*' -m31 -m32 -m64
case ${GCC_BRANCH_VER} in
3.2|3.3)
replace-cpu-flags k8 athlon64 opteron i686 x86-64
replace-cpu-flags pentium-m pentium3m pentium3
case $(tc-arch) in
amd64|x86) filter-flags '-mtune=*' ;;
# in gcc 3.3 there is a bug on ppc64 where if -mcpu is used,
# the compiler wrongly assumes a 32bit target
ppc64) filter-flags "-mcpu=*";;
esac
case $(tc-arch) in
amd64) replace-cpu-flags core2 nocona;;
x86) replace-cpu-flags core2 prescott;;
esac
replace-cpu-flags G3 750
replace-cpu-flags G4 7400
replace-cpu-flags G5 7400
# XXX: should add a sed or something to query all supported flags
# from the gcc source and trim everything else ...
filter-flags -f{no-,}unit-at-a-time -f{no-,}web -mno-tls-direct-seg-refs
filter-flags -f{no-,}stack-protector{,-all}
filter-flags -fvisibility-inlines-hidden -fvisibility=hidden
;;
3.4|4.*)
case $(tc-arch) in
x86|amd64) filter-flags '-mcpu=*';;
*-macos)
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=25127
[[ ${GCC_BRANCH_VER} == 4.0 || ${GCC_BRANCH_VER} == 4.1 ]] && \
filter-flags '-mcpu=*' '-march=*' '-mtune=*'
;;
esac
;;
esac
# Compile problems with these (bug #6641 among others)...
#filter-flags "-fno-exceptions -fomit-frame-pointer -fforce-addr"
# CFLAGS logic (verified with 3.4.3):
# CFLAGS:
# This conflicts when creating a crosscompiler, so set to a sane
# default in this case:
# used in ./configure and elsewhere for the native compiler
# used by gcc when creating libiberty.a
# used by xgcc when creating libstdc++ (and probably others)!
# this behavior should be removed...
#
# CXXFLAGS:
# used by xgcc when creating libstdc++
#
# STAGE1_CFLAGS (not used in creating a crosscompile gcc):
# used by ${CHOST}-gcc for building stage1 compiler
#
# BOOT_CFLAGS (not used in creating a crosscompile gcc):
# used by xgcc for building stage2/3 compiler
if is_crosscompile ; then
# Set this to something sane for both native and target
CFLAGS="-O2 -pipe"
local VAR="CFLAGS_"${CTARGET//-/_}
CXXFLAGS=${!VAR}
fi
export GCJFLAGS=${GCJFLAGS:-${CFLAGS}}
}
gcc_src_compile() {
gcc_do_filter_flags
einfo "CFLAGS=\"${CFLAGS}\""
einfo "CXXFLAGS=\"${CXXFLAGS}\""
# For hardened gcc 4 for build the hardened specs file to use when building gcc
setup_minispecs_gcc_build_specs
# Build in a separate build tree
mkdir -p "${WORKDIR}"/build
pushd "${WORKDIR}"/build > /dev/null
# Install our pre generated manpages if we do not have perl ...
[[ ! -x /usr/bin/perl ]] && [[ -n ${MAN_VER} ]] && \
unpack gcc-${MAN_VER}-manpages.tar.bz2
einfo "Configuring ${PN} ..."
gcc_do_configure
touch "${S}"/gcc/c-gperf.h
# Do not make manpages if we do not have perl ...
[[ ! -x /usr/bin/perl ]] \
&& find "${WORKDIR}"/build -name '*.[17]' | xargs touch
einfo "Compiling ${PN} ..."
gcc_do_make ${GCC_MAKE_TARGET}
# Do not create multiple specs files for PIE+SSP if boundschecking is in
# USE, as we disable PIE+SSP when it is.
if [[ ${ETYPE} == "gcc-compiler" ]] && want_split_specs && ! want_minispecs; then
split_out_specs_files || die "failed to split out specs"
fi
popd > /dev/null
}
gcc_src_test() {
cd "${WORKDIR}"/build
emake -j1 -k check || ewarn "check failed and that sucks :("
}
gcc-library_src_install() {
# Do the 'make install' from the build directory
cd "${WORKDIR}"/build
S=${WORKDIR}/build \
emake -j1 \
DESTDIR="${D}" \
prefix=${PREFIX} \
bindir=${BINPATH} \
includedir=${LIBPATH}/include \
datadir=${DATAPATH} \
mandir=${DATAPATH}/man \
infodir=${DATAPATH}/info \
LIBPATH="${LIBPATH}" \
${GCC_INSTALL_TARGET} || die
if [[ ${GCC_LIB_COMPAT_ONLY} == "true" ]] ; then
rm -rf "${D}"${INCLUDEPATH}
rm -rf "${D}"${DATAPATH}
pushd "${D}"${LIBPATH}/
rm *.a *.la *.so
popd
fi
if [[ -n ${GCC_LIB_USE_SUBDIR} ]] ; then
mkdir -p "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/
mv "${D}"${LIBPATH}/* "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/
mv "${WORKDIR}"/${GCC_LIB_USE_SUBDIR}/ "${D}"${LIBPATH}
dodir /etc/env.d
echo "LDPATH=\"${LIBPATH}/${GCC_LIB_USE_SUBDIR}/\"" >> "${D}"/etc/env.d/99${PN}
fi
if [[ ${GCC_VAR_TYPE} == "non-versioned" ]] ; then
# if we're not using versioned directories, we need to use versioned
# filenames.
add_version_to_shared
fi
}
gcc-compiler_src_install() {
local x=
cd "${WORKDIR}"/build
# Do allow symlinks in private gcc include dir as this can break the build
find gcc/include*/ -type l -print0 | xargs -0 rm -f
# Remove generated headers, as they can cause things to break
# (ncurses, openssl, etc).
for x in $(find gcc/include*/ -name '*.h') ; do
grep -q 'It has been auto-edited by fixincludes from' "${x}" \
&& rm -f "${x}"
done
# Do the 'make install' from the build directory
S=${WORKDIR}/build \
emake -j1 DESTDIR="${D}" install || die
# Punt some tools which are really only useful while building gcc
find "${D}" -name install-tools -prune -type d -exec rm -rf "{}" \;
# This one comes with binutils
find "${D}" -name libiberty.a -exec rm -f "{}" \;
# Move the libraries to the proper location
gcc_movelibs
# Basic sanity check
if ! is_crosscompile ; then
local EXEEXT
eval $(grep ^EXEEXT= "${WORKDIR}"/build/gcc/config.log)
[[ -r ${D}${BINPATH}/gcc${EXEEXT} ]] || die "gcc not found in ${D}"
fi
dodir /etc/env.d/gcc
create_gcc_env_entry
if want_split_specs ; then
if use hardened ; then
create_gcc_env_entry vanilla
fi
! use hardened && hardened_gcc_works && create_gcc_env_entry hardened
if hardened_gcc_works || hardened_gcc_works pie ; then
create_gcc_env_entry hardenednossp
fi
if hardened_gcc_works || hardened_gcc_works ssp ; then
create_gcc_env_entry hardenednopie
fi
create_gcc_env_entry hardenednopiessp
insinto ${LIBPATH}
doins "${WORKDIR}"/build/*.specs || die "failed to install specs"
fi
# Setup the gcc_env_entry for hardened gcc 4 with minispecs
if want_minispecs ; then
if hardened_gcc_works ; then
create_gcc_env_entry hardenednopiessp
fi
if hardened_gcc_works pie ; then
create_gcc_env_entry hardenednopie
fi
if hardened_gcc_works ssp ; then
create_gcc_env_entry hardenednossp
fi
create_gcc_env_entry vanilla
fi
# Make sure we dont have stuff lying around that
# can nuke multiple versions of gcc
gcc_slot_java
# Move <cxxabi.h> to compiler-specific directories
[[ -f ${D}${STDCXX_INCDIR}/cxxabi.h ]] && \
mv -f "${D}"${STDCXX_INCDIR}/cxxabi.h "${D}"${LIBPATH}/include/
# These should be symlinks
dodir /usr/bin
cd "${D}"${BINPATH}
for x in cpp gcc g++ c++ g77 gcj gcjh gfortran ; do
# For some reason, g77 gets made instead of ${CTARGET}-g77...
# this should take care of that
[[ -f ${x} ]] && mv ${x} ${CTARGET}-${x}
if [[ -f ${CTARGET}-${x} ]] && ! is_crosscompile ; then
ln -sf ${CTARGET}-${x} ${x}
# Create version-ed symlinks
dosym ${BINPATH}/${CTARGET}-${x} \
/usr/bin/${CTARGET}-${x}-${GCC_CONFIG_VER}
dosym ${BINPATH}/${CTARGET}-${x} \
/usr/bin/${x}-${GCC_CONFIG_VER}
fi
if [[ -f ${CTARGET}-${x}-${GCC_CONFIG_VER} ]] ; then
rm -f ${CTARGET}-${x}-${GCC_CONFIG_VER}
ln -sf ${CTARGET}-${x} ${CTARGET}-${x}-${GCC_CONFIG_VER}
fi
done
# I do not know if this will break gcj stuff, so I'll only do it for
# objc for now; basically "ffi.h" is the correct file to include,
# but it gets installed in .../GCCVER/include and yet it does
# "#include <ffitarget.h>" which (correctly, as it's an "extra" file)
# is installed in .../GCCVER/include/libffi; the following fixes
# ffi.'s include of ffitarget.h - Armando Di Cianno <fafhrd@gentoo.org>
if [[ -d ${D}${LIBPATH}/include/libffi ]] ; then
mv -i "${D}"${LIBPATH}/include/libffi/* "${D}"${LIBPATH}/include || die
rm -r "${D}"${LIBPATH}/include/libffi || die
fi
# Now do the fun stripping stuff
env RESTRICT="" CHOST=${CHOST} prepstrip "${D}${BINPATH}"
env RESTRICT="" CHOST=${CTARGET} prepstrip "${D}${LIBPATH}"
# gcc used to install helper binaries in lib/ but then moved to libexec/
[[ -d ${D}${PREFIX}/libexec/gcc ]] && \
env RESTRICT="" CHOST=${CHOST} prepstrip "${D}${PREFIX}/libexec/gcc/${CTARGET}/${GCC_CONFIG_VER}"
cd "${S}"
if is_crosscompile; then
rm -rf "${D}"/usr/share/{man,info}
rm -rf "${D}"${DATAPATH}/{man,info}
else
local cxx_mandir=${WORKDIR}/build/${CTARGET}/libstdc++-v3/docs/doxygen/man
if [[ -d ${cxx_mandir} ]] ; then
# clean bogus manpages #113902
find "${cxx_mandir}" -name '*_build_*' -exec rm {} \;
cp -r "${cxx_mandir}"/man? "${D}/${DATAPATH}"/man/
fi
has noinfo ${FEATURES} \
&& rm -r "${D}/${DATAPATH}"/info \
|| prepinfo "${DATAPATH}"
has noman ${FEATURES} \
&& rm -r "${D}/${DATAPATH}"/man \
|| prepman "${DATAPATH}"
fi
# prune empty dirs left behind
for x in 1 2 3 4 ; do
find "${D}" -type d -exec rmdir "{}" \; >& /dev/null
done
# install testsuite results
if use test; then
docinto testsuite
find "${WORKDIR}"/build -type f -name "*.sum" -print0 | xargs -0 dodoc
find "${WORKDIR}"/build -type f -path "*/testsuite/*.log" -print0 \
| xargs -0 dodoc
fi
# Rather install the script, else portage with changing $FILESDIR
# between binary and source package borks things ....
if ! is_crosscompile ; then
insinto "${DATAPATH}"
if tc_version_is_at_least 4.0 ; then
newins "${GCC_FILESDIR}"/awk/fixlafiles.awk-no_gcc_la fixlafiles.awk || die
find "${D}/${LIBPATH}" -name libstdc++.la -type f -exec rm "{}" \;
else
doins "${GCC_FILESDIR}"/awk/fixlafiles.awk || die
fi
exeinto "${DATAPATH}"
doexe "${GCC_FILESDIR}"/fix_libtool_files.sh || die
doexe "${GCC_FILESDIR}"/c{89,99} || die
fi
# use gid of 0 because some stupid ports don't have
# the group 'root' set to gid 0
chown -R root:0 "${D}"${LIBPATH}
# Create config files for eselect-compiler
create_eselect_conf
# Copy the needed minispec for hardened gcc 4
copy_minispecs_gcc_specs
# Move pretty-printers to gdb datadir to shut ldconfig up
gdbdir=/usr/share/gdb/auto-load
for module in $(find "${D}" -iname "*-gdb.py" -print); do
insinto ${gdbdir}/$(dirname "${module/${D}/}" | \
sed -e "s:/lib/:/$(get_libdir)/:g")
doins "${module}"
rm "${module}"
done
}
gcc_slot_java() {
local x
# Move Java headers to compiler-specific dir
for x in "${D}"${PREFIX}/include/gc*.h "${D}"${PREFIX}/include/j*.h ; do
[[ -f ${x} ]] && mv -f "${x}" "${D}"${LIBPATH}/include/
done
for x in gcj gnu java javax org ; do
if [[ -d ${D}${PREFIX}/include/${x} ]] ; then
dodir /${LIBPATH}/include/${x}
mv -f "${D}"${PREFIX}/include/${x}/* "${D}"${LIBPATH}/include/${x}/
rm -rf "${D}"${PREFIX}/include/${x}
fi
done
if [[ -d ${D}${PREFIX}/lib/security ]] || [[ -d ${D}${PREFIX}/$(get_libdir)/security ]] ; then
dodir /${LIBPATH}/security
mv -f "${D}"${PREFIX}/lib*/security/* "${D}"${LIBPATH}/security
rm -rf "${D}"${PREFIX}/lib*/security
fi
# Move libgcj.spec to compiler-specific directories
[[ -f ${D}${PREFIX}/lib/libgcj.spec ]] && \
mv -f "${D}"${PREFIX}/lib/libgcj.spec "${D}"${LIBPATH}/libgcj.spec
# SLOT up libgcj.pc (and let gcc-config worry about links)
local libgcj=$(find "${D}"${PREFIX}/lib/pkgconfig/ -name 'libgcj*.pc')
if [[ -n ${libgcj} ]] ; then
sed -i "/^libdir=/s:=.*:=${LIBPATH}:" "${libgcj}"
mv "${libgcj}" "${D}"/usr/lib/pkgconfig/libgcj-${GCC_PV}.pc || die
fi
# Rename jar because it could clash with Kaffe's jar if this gcc is
# primary compiler (aka don't have the -<version> extension)
cd "${D}"${BINPATH}
[[ -f jar ]] && mv -f jar gcj-jar
}
# Move around the libs to the right location. For some reason,
# when installing gcc, it dumps internal libraries into /usr/lib
# instead of the private gcc lib path
gcc_movelibs() {
# older versions of gcc did not support --print-multi-os-directory
tc_version_is_at_least 3.0 || return 0
local multiarg removedirs=""
for multiarg in $($(XGCC) -print-multi-lib) ; do
multiarg=${multiarg#*;}
multiarg=${multiarg//@/ -}
local OS_MULTIDIR=$($(XGCC) ${multiarg} --print-multi-os-directory)
local MULTIDIR=$($(XGCC) ${multiarg} --print-multi-directory)
local TODIR=${D}${LIBPATH}/${MULTIDIR}
local FROMDIR=
[[ -d ${TODIR} ]] || mkdir -p ${TODIR}
for FROMDIR in \
${LIBPATH}/${OS_MULTIDIR} \
${LIBPATH}/../${MULTIDIR} \
${PREFIX}/lib/${OS_MULTIDIR} \
${PREFIX}/${CTARGET}/lib/${OS_MULTIDIR} \
${PREFIX}/lib/${MULTIDIR}
do
removedirs="${removedirs} ${FROMDIR}"
FROMDIR=${D}${FROMDIR}
if [[ ${FROMDIR} != "${TODIR}" && -d ${FROMDIR} ]] ; then
local files=$(find "${FROMDIR}" -maxdepth 1 ! -type d 2>/dev/null)
if [[ -n ${files} ]] ; then
mv ${files} "${TODIR}"
fi
fi
done
fix_libtool_libdir_paths "${LIBPATH}/${MULTIDIR}"
done
# We remove directories separately to avoid this case:
# mv SRC/lib/../lib/*.o DEST
# rmdir SRC/lib/../lib/
# mv SRC/lib/../lib32/*.o DEST # Bork
for FROMDIR in ${removedirs} ; do
rmdir "${D}"${FROMDIR} >& /dev/null
done
find "${D}" -type d | xargs rmdir >& /dev/null
}
#----<< src_* >>----
#---->> unorganized crap in need of refactoring follows
# gcc_quick_unpack will unpack the gcc tarball and patches in a way that is
# consistant with the behavior of get_gcc_src_uri. The only patch it applies
# itself is the branch update if present.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
gcc_quick_unpack() {
pushd "${WORKDIR}" > /dev/null
export PATCH_GCC_VER=${PATCH_GCC_VER:-${GCC_RELEASE_VER}}
export UCLIBC_GCC_VER=${UCLIBC_GCC_VER:-${PATCH_GCC_VER}}
export PIE_GCC_VER=${PIE_GCC_VER:-${GCC_RELEASE_VER}}
export PP_GCC_VER=${PP_GCC_VER:-${GCC_RELEASE_VER}}
export HTB_GCC_VER=${HTB_GCC_VER:-${GCC_RELEASE_VER}}
export SPECS_GCC_VER=${SPECS_GCC_VER:-${GCC_RELEASE_VER}}
if [[ -n ${GCC_A_FAKEIT} ]] ; then
unpack ${GCC_A_FAKEIT}
elif [[ -n ${PRERELEASE} ]] ; then
unpack gcc-${PRERELEASE}.tar.bz2
elif [[ -n ${SNAPSHOT} ]] ; then
unpack gcc-${SNAPSHOT}.tar.bz2
else
unpack gcc-${GCC_RELEASE_VER}.tar.bz2
# We want branch updates to be against a release tarball
if [[ -n ${BRANCH_UPDATE} ]] ; then
pushd "${S}" > /dev/null
epatch "${DISTDIR}"/gcc-${GCC_RELEASE_VER}-branch-update-${BRANCH_UPDATE}.patch.bz2
popd > /dev/null
fi
fi
if [[ -n ${D_VER} ]] && use d ; then
pushd "${S}"/gcc > /dev/null
unpack gdc-${D_VER}-src.tar.bz2
cd ..
ebegin "Adding support for the D language"
./gcc/d/setup-gcc.sh >& "${T}"/dgcc.log
if ! eend $? ; then
eerror "The D gcc package failed to apply"
eerror "Please include this log file when posting a bug report:"
eerror " ${T}/dgcc.log"
die "failed to include the D language"
fi
popd > /dev/null
fi
[[ -n ${PATCH_VER} ]] && \
unpack gcc-${PATCH_GCC_VER}-patches-${PATCH_VER}.tar.bz2
[[ -n ${UCLIBC_VER} ]] && \
unpack gcc-${UCLIBC_GCC_VER}-uclibc-patches-${UCLIBC_VER}.tar.bz2
if want_ssp && [[ -z ${SPECS_VER} ]] ; then
if [[ -n ${PP_FVER} ]] ; then
# The gcc 3.4 propolice versions are meant to be unpacked to ${S}
pushd "${S}" > /dev/null
unpack protector-${PP_FVER}.tar.gz
popd > /dev/null
else
unpack gcc-${PP_GCC_VER}-ssp-${PP_VER}.tar.bz2
fi
fi
if want_pie ; then
if [[ -n ${PIE_CORE} ]] ; then
unpack ${PIE_CORE}
else
unpack gcc-${PIE_GCC_VER}-piepatches-v${PIE_VER}.tar.bz2
fi
[[ -n ${SPECS_VER} ]] && \
unpack gcc-${SPECS_GCC_VER}-specs-${SPECS_VER}.tar.bz2
fi
want_boundschecking && \
unpack "bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch.bz2"
popd > /dev/null
}
# Exclude any unwanted patches, as specified by the following variables:
#
# GENTOO_PATCH_EXCLUDE
# List of filenames, relative to ${WORKDIR}/patch/
#
# PIEPATCH_EXCLUDE
# List of filenames, relative to ${WORKDIR}/piepatch/
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
exclude_gcc_patches() {
local i
for i in ${GENTOO_PATCH_EXCLUDE} ; do
if [[ -f ${WORKDIR}/patch/${i} ]] ; then
einfo "Excluding patch ${i}"
rm -f "${WORKDIR}"/patch/${i} || die "failed to delete ${i}"
fi
done
for i in ${PIEPATCH_EXCLUDE} ; do
if [[ -f ${WORKDIR}/piepatch/${i} ]] ; then
einfo "Excluding piepatch ${i}"
rm -f "${WORKDIR}"/piepatch/${i} || die "failed to delete ${i}"
fi
done
}
# Try to apply some stub patches so that gcc won't error out when
# passed parameters like -fstack-protector but no ssp is found
do_gcc_stub() {
local v stub_patch=""
for v in ${GCC_RELEASE_VER} ${GCC_BRANCH_VER} ; do
stub_patch=${GCC_FILESDIR}/stubs/gcc-${v}-$1-stub.patch
if [[ -e ${stub_patch} ]] && ! use vanilla ; then
EPATCH_SINGLE_MSG="Applying stub patch for $1 ..." \
epatch "${stub_patch}"
return 0
fi
done
}
do_gcc_HTB_patches() {
if ! want_boundschecking || \
(want_ssp && [[ ${HTB_EXCLUSIVE} == "true" ]])
then
do_gcc_stub htb
return 0
fi
# modify the bounds checking patch with a regression patch
epatch "${WORKDIR}/bounds-checking-gcc-${HTB_GCC_VER}-${HTB_VER}.patch"
BRANDING_GCC_PKGVERSION="${BRANDING_GCC_PKGVERSION}, HTB-${HTB_GCC_VER}-${HTB_VER}"
}
# patch in ProPolice Stack Smashing protection
do_gcc_SSP_patches() {
# PARISC has no love ... it's our stack :(
if [[ $(tc-arch) == "hppa" ]] || \
! want_ssp || \
(want_boundschecking && [[ ${HTB_EXCLUSIVE} == "true" ]])
then
do_gcc_stub ssp
return 0
fi
[[ -z ${SPECS_VER} ]] || return 0
local ssppatch
local sspdocs
if [[ -n ${PP_FVER} ]] ; then
# Etoh keeps changing where files are and what the patch is named
if tc_version_is_at_least 3.4.1 ; then
# >3.4.1 uses version in patch name, and also includes docs
ssppatch="${S}/gcc_${PP_VER}.dif"
sspdocs="yes"
elif tc_version_is_at_least 3.4.0 ; then
# >3.4 put files where they belong and 3_4 uses old patch name
ssppatch="${S}/protector.dif"
sspdocs="no"
elif tc_version_is_at_least 3.2.3 ; then
# earlier versions have no directory structure or docs
mv "${S}"/protector.{c,h} "${S}"/gcc
ssppatch="${S}/protector.dif"
sspdocs="no"
fi
else
# Just start packaging the damn thing ourselves
mv "${WORKDIR}"/ssp/protector.{c,h} "${S}"/gcc/
ssppatch=${WORKDIR}/ssp/gcc-${PP_GCC_VER}-ssp.patch
# allow boundschecking and ssp to get along
(want_boundschecking && [[ -e ${WORKDIR}/ssp/htb-ssp.patch ]]) \
&& patch -s "${ssppatch}" "${WORKDIR}"/ssp/htb-ssp.patch
fi
[[ -z ${ssppatch} ]] && die "Sorry, SSP is not supported in this version"
epatch ${ssppatch}
if [[ ${PN} == "gcc" && ${sspdocs} == "no" ]] ; then
epatch "${GCC_FILESDIR}"/pro-police-docs.patch
fi
# Don't build crtbegin/end with ssp
sed -e 's|^CRTSTUFF_CFLAGS = |CRTSTUFF_CFLAGS = -fno-stack-protector |'\
-i gcc/Makefile.in || die "Failed to update crtstuff!"
# if gcc in a stage3 defaults to ssp, is version 3.4.0 and a stage1 is built
# the build fails building timevar.o w/:
# cc1: stack smashing attack in function ix86_split_to_parts()
if use build && tc_version_is_at_least 3.4.0 ; then
if gcc -dumpspecs | grep -q "fno-stack-protector:" ; then
epatch "${GCC_FILESDIR}"/3.4.0/gcc-3.4.0-cc1-no-stack-protector.patch
fi
fi
BRANDING_GCC_PKGVERSION="${BRANDING_GCC_PKGVERSION}, ssp-${PP_FVER:-${PP_GCC_VER}-${PP_VER}}"
if want_libssp ; then
update_gcc_for_libssp
else
update_gcc_for_libc_ssp
fi
# Don't build libgcc with ssp
sed -e 's|^\(LIBGCC2_CFLAGS.*\)$|\1 -fno-stack-protector|' \
-i gcc/Makefile.in || die "Failed to update gcc!"
}
# If glibc or uclibc has been patched to provide the necessary symbols itself,
# then lets use those for SSP instead of libgcc.
update_gcc_for_libc_ssp() {
if libc_has_ssp ; then
einfo "Updating gcc to use SSP from libc ..."
sed -e 's|^\(LIBGCC2_CFLAGS.*\)$|\1 -D_LIBC_PROVIDES_SSP_|' \
-i "${S}"/gcc/Makefile.in || die "Failed to update gcc!"
fi
}
# a split out non-libc non-libgcc ssp requires additional spec logic changes
update_gcc_for_libssp() {
einfo "Updating gcc to use SSP from libssp..."
sed -e 's|^\(INTERNAL_CFLAGS.*\)$|\1 -D_LIBSSP_PROVIDES_SSP_|' \
-i "${S}"/gcc/Makefile.in || die "Failed to update gcc!"
}
# do various updates to PIE logic
do_gcc_PIE_patches() {
if ! want_pie || \
(want_boundschecking && [[ ${HTB_EXCLUSIVE} == "true" ]])
then
return 0
fi
want_boundschecking \
&& rm -f "${WORKDIR}"/piepatch/*/*-boundschecking-no.patch* \
|| rm -f "${WORKDIR}"/piepatch/*/*-boundschecking-yes.patch*
use vanilla && return 0
if tc_version_is_at_least 4.3.2; then
guess_patch_type_in_dir "${WORKDIR}"/piepatch/
EPATCH_MULTI_MSG="Applying pie patches ..." \
epatch "${WORKDIR}"/piepatch/
else
guess_patch_type_in_dir "${WORKDIR}"/piepatch/upstream
# corrects startfile/endfile selection and shared/static/pie flag usage
EPATCH_MULTI_MSG="Applying upstream pie patches ..." \
epatch "${WORKDIR}"/piepatch/upstream
# adds non-default pie support (rs6000)
EPATCH_MULTI_MSG="Applying non-default pie patches ..." \
epatch "${WORKDIR}"/piepatch/nondef
# adds default pie support (rs6000 too) if DEFAULT_PIE[_SSP] is defined
EPATCH_MULTI_MSG="Applying default pie patches ..." \
epatch "${WORKDIR}"/piepatch/def
# we want to be able to control the pie patch logic via something other
# than ALL_CFLAGS...
sed -e '/^ALL_CFLAGS/iHARD_CFLAGS = ' \
-e 's|^ALL_CFLAGS = |ALL_CFLAGS = $(HARD_CFLAGS) |' \
-i "${S}"/gcc/Makefile.in
fi
BRANDING_GCC_PKGVERSION="${BRANDING_GCC_PKGVERSION}, pie-${PIE_VER}"
}
should_we_gcc_config() {
# we always want to run gcc-config if we're bootstrapping, otherwise
# we might get stuck with the c-only stage1 compiler
use bootstrap && return 0
use build && return 0
# if the current config is invalid, we definitely want a new one
# Note: due to bash quirkiness, the following must not be 1 line
local curr_config
curr_config=$(env -i ROOT="${ROOT}" gcc-config -c ${CTARGET} 2>&1) || return 0
# if the previously selected config has the same major.minor (branch) as
# the version we are installing, then it will probably be uninstalled
# for being in the same SLOT, make sure we run gcc-config.
local curr_config_ver=$(env -i ROOT="${ROOT}" gcc-config -S ${curr_config} | awk '{print $2}')
local curr_branch_ver=$(get_version_component_range 1-2 ${curr_config_ver})
# If we're using multislot, just run gcc-config if we're installing
# to the same profile as the current one.
use multislot && return $([[ ${curr_config_ver} == ${GCC_CONFIG_VER} ]])
if [[ ${curr_branch_ver} == ${GCC_BRANCH_VER} ]] ; then
return 0
else
# if we're installing a genuinely different compiler version,
# we should probably tell the user -how- to switch to the new
# gcc version, since we're not going to do it for him/her.
# We don't want to switch from say gcc-3.3 to gcc-3.4 right in
# the middle of an emerge operation (like an 'emerge -e world'
# which could install multiple gcc versions).
einfo "The current gcc config appears valid, so it will not be"
einfo "automatically switched for you. If you would like to"
einfo "switch to the newly installed gcc version, do the"
einfo "following:"
echo
einfo "gcc-config ${CTARGET}-${GCC_CONFIG_VER}"
einfo "source /etc/profile"
echo
ebeep
return 1
fi
}
do_gcc_config() {
if ! should_we_gcc_config ; then
env -i ROOT="${ROOT}" gcc-config --use-old --force
return 0
fi
local current_gcc_config="" current_specs="" use_specs=""
current_gcc_config=$(env -i ROOT="${ROOT}" gcc-config -c ${CTARGET} 2>/dev/null)
if [[ -n ${current_gcc_config} ]] ; then
# figure out which specs-specific config is active
current_specs=$(gcc-config -S ${current_gcc_config} | awk '{print $3}')
[[ -n ${current_specs} ]] && use_specs=-${current_specs}
fi
if [[ -n ${use_specs} ]] && \
[[ ! -e ${ROOT}/etc/env.d/gcc/${CTARGET}-${GCC_CONFIG_VER}${use_specs} ]]
then
ewarn "The currently selected specs-specific gcc config,"
ewarn "${current_specs}, doesn't exist anymore. This is usually"
ewarn "due to enabling/disabling hardened or switching to a version"
ewarn "of gcc that doesnt create multiple specs files. The default"
ewarn "config will be used, and the previous preference forgotten."
ebeep
epause
use_specs=""
fi
gcc-config ${CTARGET}-${GCC_CONFIG_VER}${use_specs}
}
should_we_eselect_compiler() {
# we always want to run gcc-config if we're bootstrapping, otherwise
# we might get stuck with the c-only stage1 compiler
use bootstrap && return 0
use build && return 0
# if the current config is invalid, we definitely want a new one
# Note: due to bash quirkiness, the following must not be 1 line
local curr_config
curr_config=$(env -i eselect compiler show ${CTARGET} 2>&1) || return 0
[[ -z ${curr_config} || ${curr_config} == "(none)" ]] && return 0
# if the previously selected config has the same major.minor (branch) as
# the version we are installing, then it will probably be uninstalled
# for being in the same SLOT, make sure we run gcc-config.
local curr_config_ver=$(echo ${curr_config} | cut -f1 -d/ | awk -F - '{ print $5 }')
local curr_branch_ver=$(get_version_component_range 1-2 ${curr_config_ver})
# If we're using multislot, just run gcc-config if we're installing
# to the same profile as the current one.
use multislot && return $([[ ${curr_config_ver} == ${GCC_CONFIG_VER} ]])
if [[ ${curr_branch_ver} == ${GCC_BRANCH_VER} ]] ; then
return 0
else
# if we're installing a genuinely different compiler version,
# we should probably tell the user -how- to switch to the new
# gcc version, since we're not going to do it for him/her.
# We don't want to switch from say gcc-3.3 to gcc-3.4 right in
# the middle of an emerge operation (like an 'emerge -e world'
# which could install multiple gcc versions).
einfo "The current gcc config appears valid, so it will not be"
einfo "automatically switched for you. If you would like to"
einfo "switch to the newly installed gcc version, do the"
einfo "following:"
echo
einfo "eselect compiler set <profile>"
echo
ebeep
return 1
fi
}
do_eselect_compiler() {
if ! should_we_eselect_compiler; then
eselect compiler update
return 0
fi
for abi in $(get_all_abis) ; do
local ctarget=$(get_abi_CHOST ${abi})
local current_specs=$(env -i eselect compiler show ${ctarget} | cut -f2 -d/)
if [[ -n ${current_specs} && ${current_specs} != "(none)" ]] && eselect compiler set ${CTARGET}-${GCC_CONFIG_VER}/${current_specs} &> /dev/null; then
einfo "The following compiler profile has been activated based on your previous profile:"
einfo "${CTARGET}-${GCC_CONFIG_VER}/${current_specs}"
else
# We couldn't choose based on the old specs, so fall back on vanilla/hardened based on USE
local spec
if use hardened ; then
spec="hardened"
else
spec="vanilla"
fi
local profile
local isset=0
for profile in "${current_specs%-*}-${spec}" "${abi}-${spec}" "${spec}" ; do
if eselect compiler set ${CTARGET}-${GCC_CONFIG_VER}/${profile} &> /dev/null ; then
ewarn "The newly installed version of gcc does not have a profile that matches the name of your"
ewarn "currently selected profile for ${ctarget}, so we have enabled the following instead:"
ewarn "${CTARGET}-${GCC_CONFIG_VER}/${profile}"
ewarn "If this is incorrect, please use 'eselect compiler set' to"
ewarn "select another profile."
isset=1
break
fi
done
if [[ ${isset} == 0 ]] ; then
eerror "We were not able to automatically set the current compiler for ${ctarget}"
eerror "to your newly emerged gcc. Please use 'eselect compiler set'"
eerror "to select your compiler."
fi
fi
done
}
# This function allows us to gentoo-ize gcc's version number and bugzilla
# URL without needing to use patches.
gcc_version_patch() {
# gcc-4.3+ has configure flags (whoo!)
tc_version_is_at_least 4.3 && return 0
local version_string=${GCC_CONFIG_VER}
[[ -n ${BRANCH_UPDATE} ]] && version_string="${version_string} ${BRANCH_UPDATE}"
einfo "patching gcc version: ${version_string} (${BRANDING_GCC_PKGVERSION})"
if grep -qs VERSUFFIX "${S}"/gcc/version.c ; then
sed -i -e "s~VERSUFFIX \"\"~VERSUFFIX \" (${BRANDING_GCC_PKGVERSION})\"~" \
"${S}"/gcc/version.c || die "failed to update VERSUFFIX with Gentoo branding"
else
version_string="${version_string} (${BRANDING_GCC_PKGVERSION})"
sed -i -e "s~\(const char version_string\[\] = \"\).*\(\".*\)~\1$version_string\2~" \
"${S}"/gcc/version.c || die "failed to update version.c with Gentoo branding."
fi
sed -i -e 's~gcc\.gnu\.org\/bugs\.html~bugs\.gentoo\.org\/~' \
"${S}"/gcc/version.c || die "Failed to change the bug URL"
}
# The purpose of this DISGUSTING gcc multilib hack is to allow 64bit libs
# to live in lib instead of lib64 where they belong, with 32bit libraries
# in lib32. This hack has been around since the beginning of the amd64 port,
# and we're only now starting to fix everything that's broken. Eventually
# this should go away.
#
# Travis Tilley <lv@gentoo.org> (03 Sep 2004)
#
disgusting_gcc_multilib_HACK() {
local config
local libdirs
if has_multilib_profile ; then
case $(tc-arch) in
amd64)
config="i386/t-linux64"
libdirs="../$(get_abi_LIBDIR amd64) ../$(get_abi_LIBDIR x86)" \
;;
ppc64)
config="rs6000/t-linux64"
libdirs="../$(get_abi_LIBDIR ppc64) ../$(get_abi_LIBDIR ppc)" \
;;
esac
else
die "Your profile is no longer supported by portage."
fi
einfo "updating multilib directories to be: ${libdirs}"
sed -i -e "s:^MULTILIB_OSDIRNAMES.*:MULTILIB_OSDIRNAMES = ${libdirs}:" "${S}"/gcc/config/${config}
}
disable_multilib_libjava() {
if is_gcj ; then
# We dont want a multilib libjava, so lets use this hack taken from fedora
pushd "${S}" > /dev/null
sed -i -e 's/^all: all-redirect/ifeq (\$(MULTISUBDIR),)\nall: all-redirect\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
sed -i -e 's/^install: install-redirect/ifeq (\$(MULTISUBDIR),)\ninstall: install-redirect\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
sed -i -e 's/^check: check-redirect/ifeq (\$(MULTISUBDIR),)\ncheck: check-redirect\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
sed -i -e 's/^all: all-recursive/ifeq (\$(MULTISUBDIR),)\nall: all-recursive\nelse\nall:\n\techo Multilib libjava build disabled\nendif/' libjava/Makefile.in
sed -i -e 's/^install: install-recursive/ifeq (\$(MULTISUBDIR),)\ninstall: install-recursive\nelse\ninstall:\n\techo Multilib libjava install disabled\nendif/' libjava/Makefile.in
sed -i -e 's/^check: check-recursive/ifeq (\$(MULTISUBDIR),)\ncheck: check-recursive\nelse\ncheck:\n\techo Multilib libjava check disabled\nendif/' libjava/Makefile.in
popd > /dev/null
fi
}
# make sure the libtool archives have libdir set to where they actually
# -are-, and not where they -used- to be. also, any dependencies we have
# on our own .la files need to be updated.
fix_libtool_libdir_paths() {
pushd "${D}" >/dev/null
pushd "./${1}" >/dev/null
local dir="${PWD#${D%/}}"
local allarchives=$(echo *.la)
allarchives="\(${allarchives// /\\|}\)"
popd >/dev/null
sed -i \
-e "/^libdir=/s:=.*:='${dir}':" \
./${dir}/*.la
sed -i \
-e "/^dependency_libs=/s:/[^ ]*/${allarchives}:${LIBPATH}/\1:g" \
$(find ./${PREFIX}/lib* -maxdepth 3 -name '*.la') \
./${dir}/*.la
popd >/dev/null
}
is_multilib() {
[[ ${GCCMAJOR} < 3 ]] && return 1
case ${CTARGET} in
mips64*|powerpc64*|s390x*|sparc*|x86_64*)
has_multilib_profile || use multilib ;;
*-*-solaris*) use multilib ;;
*-apple-darwin*) use multilib ;;
*) false ;;
esac
}
is_cxx() {
gcc-lang-supported 'c++' || return 1
! use nocxx
}
is_d() {
gcc-lang-supported d || return 1
use d
}
is_f77() {
gcc-lang-supported f77 || return 1
use fortran
}
is_f95() {
gcc-lang-supported f95 || return 1
use fortran
}
is_fortran() {
gcc-lang-supported fortran || return 1
use fortran
}
is_gcj() {
gcc-lang-supported java || return 1
use gcj
}
is_libffi() {
has libffi ${IUSE} || return 1
use libffi
}
is_objc() {
gcc-lang-supported objc || return 1
use objc
}
is_objcxx() {
gcc-lang-supported 'obj-c++' || return 1
use objc++
}
is_ada() {
gcc-lang-supported ada || return 1
use ada
}
is_treelang() {
has boundschecking ${IUSE} && use boundschecking && return 1 #260532
is_crosscompile && return 1 #199924
gcc-lang-supported treelang || return 1
#use treelang
return 0
}