sys-boot/coreboot/files/3rdparty/fsp/KabylakeFspBinPkg/Include/FsptUpd.h

/** @file

  @copyright
  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this
  list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
  list of conditions and the following disclaimer in the documentation and/or
  other materials provided with the distribution.
* Neither the name of Intel Corporation nor the names of its contributors may
  be used to endorse or promote products derived from this software without
  specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  THE POSSIBILITY OF SUCH DAMAGE.

  This file is automatically generated. Please do NOT modify !!!

**/

#ifndef __FSPTUPD_H__
#define __FSPTUPD_H__

#include <FspUpd.h>

#pragma pack(1)


/** Fsp T Core UPD
**/
typedef struct {

/** Offset 0x0020
**/
  UINT32                      MicrocodeRegionBase;

/** Offset 0x0024
**/
  UINT32                      MicrocodeRegionSize;

/** Offset 0x0028
**/
  UINT32                      CodeRegionBase;

/** Offset 0x002C
**/
  UINT32                      CodeRegionSize;

/** Offset 0x0030
**/
  UINT8                       Reserved[16];
} FSPT_CORE_UPD;

/** Fsp T Configuration
**/
typedef struct {

/** Offset 0x0040 - PcdSerialIoUartDebugEnable
  Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. 
  0:Disable, 1:Enable and Initialize, 2:Enable without Initializing
**/
  UINT8                       PcdSerialIoUartDebugEnable;

/** Offset 0x0041 - PcdSerialIoUartNumber
  Select SerialIo Uart Controller for debug.
  0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
**/
  UINT8                       PcdSerialIoUartNumber;

/** Offset 0x0042
**/
  UINT8                       UnusedUpdSpace0[2];

/** Offset 0x0044
**/
  UINT32                      PcdSerialIoUartInputClock;

/** Offset 0x0048 - Pci Express Base Address
  Base address to be programmed for Pci Express 
**/
  UINT64                      PcdPciExpressBaseAddress;

/** Offset 0x0050 - Pci Express Region Length
  Region Length to be programmed for Pci Express 
**/
  UINT32                      PcdPciExpressRegionLength;

/** Offset 0x0054
**/
  UINT8                       ReservedFsptUpd1[12];
} FSP_T_CONFIG;

/** Fsp T UPD Configuration
**/
typedef struct {

/** Offset 0x0000
**/
  FSP_UPD_HEADER              FspUpdHeader;

/** Offset 0x0020
**/
  FSPT_CORE_UPD               FsptCoreUpd;

/** Offset 0x0040
**/
  FSP_T_CONFIG                FsptConfig;

/** Offset 0x0060
**/
  UINT8                       UnusedUpdSpace1[6];

/** Offset 0x0066
**/
  UINT16                      UpdTerminator;
} FSPT_UPD;

#pragma pack()

#endif