# Copyright 1999-2021 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

EAPI="7"

PYTHON_COMPAT=( python3_{6,7,8} )
PYTHON_REQ_USE="ncurses,readline"

FIRMWARE_ABI_VERSION="5.2.0-r50"

inherit eutils linux-info toolchain-funcs multilib python-r1
inherit udev fcaps readme.gentoo-r1 pax-utils l10n xdg-utils
inherit flag-o-matic

if [[ ${PV} = *9999* ]]; then
	EGIT_REPO_URI="https://git.qemu.org/git/qemu.git"
	EGIT_SUBMODULES=(
		meson
		tests/fp/berkeley-softfloat-3
		tests/fp/berkeley-testfloat-3
		ui/keycodemapdb
	)
	inherit git-r3
	SRC_URI=""
else
	SRC_URI="https://download.qemu.org/${P}.tar.xz"
	KEYWORDS="*"
fi

DESCRIPTION="QEMU + Kernel-based Virtual Machine userland tools"
HOMEPAGE="http://www.qemu.org http://www.linux-kvm.org"

LICENSE="GPL-2 LGPL-2 BSD-2"
SLOT="0"

IUSE="accessibility +aio alsa bzip2 capstone +caps +curl debug +doc
	+fdt glusterfs gnutls gtk infiniband iscsi io-uring
	jack jemalloc +jpeg kernel_linux
	kernel_FreeBSD lzo multipath
	ncurses nfs nls numa opengl +oss +pin-upstream-blobs
	plugins +png pulseaudio python rbd sasl +seccomp sdl sdl-image selinux
	+slirp
	smartcard snappy spice ssh static static-user systemtap test udev usb
	usbredir vde +vhost-net vhost-user-fs virgl virtfs +vnc vte xattr xen
	xfs zstd"

COMMON_TARGETS="aarch64 alpha arm cris hppa i386 m68k microblaze microblazeel
	mips mips64 mips64el mipsel nios2 or1k ppc ppc64 riscv32 riscv64 s390x
	sh4 sh4eb sparc sparc64 x86_64 xtensa xtensaeb"
IUSE_SOFTMMU_TARGETS="${COMMON_TARGETS}
	avr lm32 moxie rx tricore unicore32"
IUSE_USER_TARGETS="${COMMON_TARGETS}
	aarch64_be armeb mipsn32 mipsn32el ppc64abi32 ppc64le sparc32plus
	tilegx"

use_softmmu_targets=$(printf ' qemu_softmmu_targets_%s' ${IUSE_SOFTMMU_TARGETS})
use_user_targets=$(printf ' qemu_user_targets_%s' ${IUSE_USER_TARGETS})
IUSE+=" ${use_softmmu_targets} ${use_user_targets}"

RESTRICT="!test? ( test )"
# Allow no targets to be built so that people can get a tools-only build.
# Block USE flag configurations known to not work.
REQUIRED_USE="${PYTHON_REQUIRED_USE}
	qemu_softmmu_targets_arm? ( fdt )
	qemu_softmmu_targets_microblaze? ( fdt )
	qemu_softmmu_targets_mips64el? ( fdt )
	qemu_softmmu_targets_ppc64? ( fdt )
	qemu_softmmu_targets_ppc? ( fdt )
	qemu_softmmu_targets_riscv32? ( fdt )
	qemu_softmmu_targets_riscv64? ( fdt )
	static? ( static-user !alsa !gtk !jack !opengl !pulseaudio !plugins !rbd !snappy )
	static-user? ( !plugins )
	vhost-user-fs? ( caps seccomp )
	virtfs? ( caps xattr )
	vte? ( gtk )
	multipath? ( udev )
	plugins? ( !static !static-user )
"

# Dependencies required for qemu tools (qemu-nbd, qemu-img, qemu-io, ...)
# and user/softmmu targets (qemu-*, qemu-system-*).
#
# Yep, you need both libcap and libcap-ng since virtfs only uses libcap.
#
# The attr lib isn't always linked in (although the USE flag is always
# respected).  This is because qemu supports using the C library's API
# when available rather than always using the external library.
ALL_DEPEND="
	>=dev-libs/glib-2.0[static-libs(+)]
	sys-libs/zlib[static-libs(+)]
	python? ( ${PYTHON_DEPS} )
	systemtap? ( dev-util/systemtap )
	xattr? ( sys-apps/attr[static-libs(+)] )"

# Dependencies required for qemu tools (qemu-nbd, qemu-img, qemu-io, ...)
# softmmu targets (qemu-system-*).
SOFTMMU_TOOLS_DEPEND="
	dev-libs/libxml2[static-libs(+)]
	>=x11-libs/pixman-0.28.0[static-libs(+)]
	accessibility? (
		app-accessibility/brltty[api]
		app-accessibility/brltty[static-libs(+)]
	)
	aio? ( dev-libs/libaio[static-libs(+)] )
	alsa? ( >=media-libs/alsa-lib-1.0.13 )
	bzip2? ( app-arch/bzip2[static-libs(+)] )
	capstone? ( dev-libs/capstone:= )
	caps? ( sys-libs/libcap-ng[static-libs(+)] )
	curl? ( >=net-misc/curl-7.15.4[static-libs(+)] )
	fdt? ( >=sys-apps/dtc-1.5.0[static-libs(+)] )
	glusterfs? ( >=sys-cluster/glusterfs-3.4.0[static-libs(+)] )
	gnutls? (
		dev-libs/nettle:=[static-libs(+)]
		>=net-libs/gnutls-3.0:=[static-libs(+)]
	)
	gtk? (
		x11-libs/gtk+:3
		vte? ( x11-libs/vte:2.91 )
	)
	infiniband? (
		sys-fabric/libibumad:=[static-libs(+)]
		sys-fabric/libibverbs:=[static-libs(+)]
		sys-fabric/librdmacm:=[static-libs(+)]
	)
	iscsi? ( net-libs/libiscsi )
	io-uring? ( sys-libs/liburing:=[static-libs(+)] )
	jack? ( virtual/jack )
	jemalloc? ( dev-libs/jemalloc )
	jpeg? ( virtual/jpeg:0=[static-libs(+)] )
	lzo? ( dev-libs/lzo:2[static-libs(+)] )
	multipath? ( sys-fs/multipath-tools )
	ncurses? (
		sys-libs/ncurses:0=[unicode]
		sys-libs/ncurses:0=[static-libs(+)]
	)
	nfs? ( >=net-fs/libnfs-1.9.3:=[static-libs(+)] )
	numa? ( sys-process/numactl[static-libs(+)] )
	opengl? (
		virtual/opengl
		media-libs/libepoxy[static-libs(+)]
		media-libs/mesa[static-libs(+)]
		media-libs/mesa[egl,gbm]
	)
	png? ( media-libs/libpng:0=[static-libs(+)] )
	pulseaudio? ( media-sound/pulseaudio )
	rbd? ( sys-cluster/ceph )
	sasl? ( dev-libs/cyrus-sasl[static-libs(+)] )
	sdl? (
		media-libs/libsdl2[video]
		media-libs/libsdl2[static-libs(+)]
	)
	sdl-image? ( media-libs/sdl2-image[static-libs(+)] )
	seccomp? ( >=sys-libs/libseccomp-2.1.0[static-libs(+)] )
	slirp? ( net-libs/libslirp[static-libs(+)] )
	smartcard? ( >=app-emulation/libcacard-2.5.0[static-libs(+)] )
	snappy? ( app-arch/snappy:= )
	spice? (
		>=app-emulation/spice-protocol-0.12.3
		>=app-emulation/spice-0.12.0[static-libs(+)]
	)
	ssh? ( >=net-libs/libssh-0.8.6[static-libs(+)] )
	udev? ( virtual/libudev[static-libs(+)] )
	usb? ( >=virtual/libusb-1-r2[static-libs(+)] )
	usbredir? ( >=sys-apps/usbredir-0.6[static-libs(+)] )
	vde? ( net-misc/vde[static-libs(+)] )
	virgl? ( media-libs/virglrenderer[static-libs(+)] )
	virtfs? ( sys-libs/libcap )
	xen? ( app-emulation/xen-tools:= )
	xfs? ( sys-fs/xfsprogs[static-libs(+)] )
	zstd? ( >=app-arch/zstd-1.4.0[static-libs(+)] )
"

SEABIOS_VERSION="1.14.0"

X86_FIRMWARE_DEPEND="
	pin-upstream-blobs? (
		~sys-firmware/edk2-ovmf-202008[binary]
		~sys-firmware/ipxe-1.21.1[binary,qemu]
		~sys-firmware/seabios-${SEABIOS_VERSION}[binary,seavgabios]
		~sys-firmware/sgabios-0.1_pre10[binary]
	)
	!pin-upstream-blobs? (
		sys-firmware/edk2-ovmf
		sys-firmware/ipxe[qemu]
		>=sys-firmware/seabios-${SEABIOS_VERSION}[seavgabios]
		sys-firmware/sgabios
	)"
PPC_FIRMWARE_DEPEND="
	pin-upstream-blobs? (
		~sys-firmware/seabios-${SEABIOS_VERSION}[binary,seavgabios]
	)
	!pin-upstream-blobs? (
		>=sys-firmware/seabios-${SEABIOS_VERSION}[seavgabios]
	)
"

BDEPEND="
	$(python_gen_impl_dep)
	dev-lang/perl
	sys-apps/texinfo
	virtual/pkgconfig
	doc? ( dev-python/sphinx )
	gtk? ( nls? ( sys-devel/gettext ) )
	test? (
		dev-libs/glib[utils]
		sys-devel/bc
	)
"
CDEPEND="
	!static? (
		${ALL_DEPEND//\[static-libs(+)]}
		${SOFTMMU_TOOLS_DEPEND//\[static-libs(+)]}
	)
	qemu_softmmu_targets_i386? ( ${X86_FIRMWARE_DEPEND} )
	qemu_softmmu_targets_x86_64? ( ${X86_FIRMWARE_DEPEND} )
	qemu_softmmu_targets_ppc? ( ${PPC_FIRMWARE_DEPEND} )
	qemu_softmmu_targets_ppc64? ( ${PPC_FIRMWARE_DEPEND} )
"
DEPEND="${CDEPEND}
	kernel_linux? ( >=sys-kernel/linux-headers-2.6.35 )
	static? (
		${ALL_DEPEND}
		${SOFTMMU_TOOLS_DEPEND}
	)
	static-user? ( ${ALL_DEPEND} )"
RDEPEND="${CDEPEND}
	acct-group/kvm
	selinux? ( sec-policy/selinux-qemu )"

PATCHES=(
	"${FILESDIR}"/${PN}-2.11.1-capstone_include_path.patch
	"${FILESDIR}"/${PN}-5.2.0-cleaner-werror.patch
	"${FILESDIR}"/${PN}-5.2.0-disable-keymap.patch
	"${FILESDIR}"/${PN}-5.2.0-strings.patch
	"${FILESDIR}"/${PN}-5.2.0-fix-firmware-path.patch
	"${FILESDIR}"/${PN}-5.2.0-no-pie-ld.patch
	"${FILESDIR}"/${PN}-5.2.0-dce-locks.patch
)

QA_PREBUILT="
	usr/share/qemu/hppa-firmware.img
	usr/share/qemu/openbios-ppc
	usr/share/qemu/openbios-sparc64
	usr/share/qemu/openbios-sparc32
	usr/share/qemu/opensbi-riscv64-generic-fw_dynamic.elf
	usr/share/qemu/opensbi-riscv32-generic-fw_dynamic.elf
	usr/share/qemu/palcode-clipper
	usr/share/qemu/s390-ccw.img
	usr/share/qemu/s390-netboot.img
	usr/share/qemu/u-boot.e500
"

QA_WX_LOAD="usr/bin/qemu-i386
	usr/bin/qemu-x86_64
	usr/bin/qemu-alpha
	usr/bin/qemu-arm
	usr/bin/qemu-cris
	usr/bin/qemu-m68k
	usr/bin/qemu-microblaze
	usr/bin/qemu-microblazeel
	usr/bin/qemu-mips
	usr/bin/qemu-mipsel
	usr/bin/qemu-or1k
	usr/bin/qemu-ppc
	usr/bin/qemu-ppc64
	usr/bin/qemu-ppc64abi32
	usr/bin/qemu-sh4
	usr/bin/qemu-sh4eb
	usr/bin/qemu-sparc
	usr/bin/qemu-sparc64
	usr/bin/qemu-armeb
	usr/bin/qemu-sparc32plus
	usr/bin/qemu-s390x
	usr/bin/qemu-unicore32
"

DOC_CONTENTS="If you don't have kvm compiled into the kernel, make sure you have the
kernel module loaded before running kvm. The easiest way to ensure that the
kernel module is loaded is to load it on boot.
	For AMD CPUs the module is called 'kvm-amd'.
	For Intel CPUs the module is called 'kvm-intel'.
Please review /etc/conf.d/modules for how to load these.

Make sure your user is in the 'kvm' group. Just run
	$ gpasswd -a <USER> kvm
then have <USER> re-login.

For brand new installs, the default permissions on /dev/kvm might not let
you access it.  You can tell udev to reset ownership/perms:
	$ udevadm trigger -c add /dev/kvm

If you want to register binfmt handlers for qemu user targets:
For openrc:
	# rc-update add qemu-binfmt
For systemd:
	# ln -s /usr/share/qemu/binfmt.d/qemu.conf /etc/binfmt.d/qemu.conf"

pkg_pretend() {
	if use kernel_linux && kernel_is lt 2 6 25; then
		eerror "This version of KVM requires a host kernel of 2.6.25 or higher."
	elif use kernel_linux; then
		if ! linux_config_exists; then
			eerror "Unable to check your kernel for KVM support"
		else
			CONFIG_CHECK="~KVM ~TUN ~BRIDGE"
			ERROR_KVM="You must enable KVM in your kernel to continue"
			ERROR_KVM_AMD="If you have an AMD CPU, you must enable KVM_AMD in"
			ERROR_KVM_AMD+=" your kernel configuration."
			ERROR_KVM_INTEL="If you have an Intel CPU, you must enable"
			ERROR_KVM_INTEL+=" KVM_INTEL in your kernel configuration."
			ERROR_TUN="You will need the Universal TUN/TAP driver compiled"
			ERROR_TUN+=" into your kernel or loaded as a module to use the"
			ERROR_TUN+=" virtual network device if using -net tap."
			ERROR_BRIDGE="You will also need support for 802.1d"
			ERROR_BRIDGE+=" Ethernet Bridging for some network configurations."
			use vhost-net && CONFIG_CHECK+=" ~VHOST_NET"
			ERROR_VHOST_NET="You must enable VHOST_NET to have vhost-net"
			ERROR_VHOST_NET+=" support"

			if use amd64 || use x86 || use amd64-linux || use x86-linux; then
				if grep -q AuthenticAMD /proc/cpuinfo; then
					CONFIG_CHECK+=" ~KVM_AMD"
				elif grep -q GenuineIntel /proc/cpuinfo; then
					CONFIG_CHECK+=" ~KVM_INTEL"
				fi
			fi

			use python && CONFIG_CHECK+=" ~DEBUG_FS"
			ERROR_DEBUG_FS="debugFS support required for kvm_stat"

			# Now do the actual checks setup above
			check_extra_config
		fi
	fi

	if grep -qs '/usr/bin/qemu-kvm' "${EROOT}"/etc/libvirt/qemu/*.xml; then
		eerror "The kvm/qemu-kvm wrappers no longer exist, but your libvirt"
		eerror "instances are still pointing to it.  Please update your"
		eerror "configs in /etc/libvirt/qemu/ to use the -enable-kvm flag"
		eerror "and the right system binary (e.g. qemu-system-x86_64)."
		die "update your virt configs to not use qemu-kvm"
	fi
}

# Sanity check to make sure target lists are kept up-to-date.
check_targets() {
	local var=$1 mak=$2
	local detected sorted

	pushd "${S}"/default-configs/targets/ >/dev/null || die

	# Force C locale until glibc is updated. #564936
	detected=$(echo $(printf '%s\n' *-${mak}.mak | sed "s:-${mak}.mak::" | LC_COLLATE=C sort -u))
	sorted=$(echo $(printf '%s\n' ${!var} | LC_COLLATE=C sort -u))
	if [[ ${sorted} != "${detected}" ]] ; then
		eerror "The ebuild needs to be kept in sync."
		eerror "${var}: ${sorted}"
		eerror "$(printf '%-*s' ${#var} configure): ${detected}"
		die "sync ${var} to the list of targets"
	fi

	popd >/dev/null
}

src_prepare() {
	# workaround -fcommon breakage: bug #726560
	[[ ${PV} == 5.2.0 ]] || die "Check if -fcommon hack is needed"
	filter-flags -fcommon

	check_targets IUSE_SOFTMMU_TARGETS softmmu
	check_targets IUSE_USER_TARGETS linux-user

	default

	# Use correct toolchain to fix cross-compiling
	tc-export AR AS LD NM OBJCOPY PKG_CONFIG RANLIB STRINGS
	export WINDRES=${CHOST}-windres

	# Verbose builds
	MAKEOPTS+=" V=1"

	# Remove bundled copy of libfdt
	rm -r dtc || die
}

##
# configures qemu based on the build directory and the build type
# we are using.
#
qemu_src_configure() {
	debug-print-function ${FUNCNAME} "$@"

	local buildtype=$1
	local builddir="${S}/${buildtype}-build"

	mkdir "${builddir}"

	local conf_opts=(
		--prefix=/usr
		--sysconfdir=/etc
		--bindir=/usr/bin
		--libdir=/usr/$(get_libdir)
		--datadir=/usr/share
		--docdir=/usr/share/doc/${PF}/html
		--mandir=/usr/share/man
		--localstatedir=/var
		--disable-bsd-user
		--disable-containers # bug #732972
		--disable-guest-agent
		--disable-strip

		# bug #746752: TCG interpreter has a few limitations:
		# - it does not support FPU
		# - it's generally slower on non-self-modifying code
		# It's advantage is support for host architectures
		# where native codegeneration is not implemented.
		# Gentoo has qemu keyworded only on targets with
		# native code generation available. Avoid the interpreter.
		--disable-tcg-interpreter

		--disable-werror
		# We support gnutls/nettle for crypto operations.  It is possible
		# to use gcrypt when gnutls/nettle are disabled (but not when they
		# are enabled), but it's not really worth the hassle.  Disable it
		# all the time to avoid automatically detecting it. #568856
		--disable-gcrypt
		--python="${PYTHON}"
		--cc="$(tc-getCC)"
		--cxx="$(tc-getCXX)"
		--host-cc="$(tc-getBUILD_CC)"
		$(use_enable debug debug-info)
		$(use_enable debug debug-tcg)
		$(use_enable doc docs)
		$(use_enable nls gettext)
		$(use_enable plugins)
		$(use_enable xattr attr)
	)

	# Disable options not used by user targets. This simplifies building
	# static user targets (USE=static-user) considerably.
	conf_notuser() {
		if [[ ${buildtype} == "user" ]] ; then
			echo "--disable-${2:-$1}"
		else
			use_enable "$@"
		fi
	}
	# Enable option only for softmmu build, but not 'user' or 'tools'
	conf_softmmu() {
		if [[ ${buildtype} == "softmmu" ]] ; then
			use_enable "$@"
		else
			echo "--disable-${2:-$1}"
		fi
	}
	# Enable option only for tools build, but not 'user' or 'softmmu'
	conf_tools() {
		if [[ ${buildtype} == "tools" ]] ; then
			use_enable "$@"
		else
			echo "--disable-${2:-$1}"
		fi
	}
	conf_opts+=(
		$(conf_notuser accessibility brlapi)
		$(conf_notuser aio linux-aio)
		$(conf_notuser bzip2)
		$(conf_notuser capstone)
		$(conf_notuser caps cap-ng)
		$(conf_notuser curl)
		$(conf_notuser fdt)
		$(conf_notuser glusterfs)
		$(conf_notuser gnutls)
		$(conf_notuser gnutls nettle)
		$(conf_notuser gtk)
		$(conf_notuser infiniband rdma)
		$(conf_notuser iscsi libiscsi)
		$(conf_notuser io-uring linux-io-uring)
		$(conf_notuser jemalloc jemalloc)
		$(conf_notuser jpeg vnc-jpeg)
		$(conf_notuser kernel_linux kvm)
		$(conf_notuser lzo)
		$(conf_notuser multipath mpath)
		$(conf_notuser ncurses curses)
		$(conf_notuser nfs libnfs)
		$(conf_notuser numa)
		$(conf_notuser opengl)
		$(conf_notuser png vnc-png)
		$(conf_notuser rbd)
		$(conf_notuser sasl vnc-sasl)
		$(conf_notuser sdl)
		$(conf_softmmu sdl-image)
		$(conf_notuser seccomp)
		$(conf_notuser slirp slirp system)
		$(conf_notuser smartcard)
		$(conf_notuser snappy)
		$(conf_notuser spice)
		$(conf_notuser ssh libssh)
		$(conf_notuser udev libudev)
		$(conf_notuser usb libusb)
		$(conf_notuser usbredir usb-redir)
		$(conf_notuser vde)
		$(conf_notuser vhost-net)
		$(conf_notuser vhost-user-fs)
		$(conf_tools vhost-user-fs virtiofsd)
		$(conf_notuser virgl virglrenderer)
		$(conf_notuser virtfs)
		$(conf_notuser vnc)
		$(conf_notuser vte)
		$(conf_notuser xen)
		$(conf_notuser xen xen-pci-passthrough)
		$(conf_notuser xfs xfsctl)
		# use prebuilt keymaps, bug #759604
		--disable-xkbcommon
		$(conf_notuser zstd)
	)

	if [[ ${buildtype} == "user" ]] ; then
		conf_opts+=( --disable-libxml2 )
	else
		conf_opts+=( --enable-libxml2 )
	fi

	if [[ ! ${buildtype} == "user" ]] ; then
		# audio options
		local audio_opts=(
			# Note: backend order matters here: #716202
			# We iterate from higher-level to lower level.
			$(usex pulseaudio pa "")
			$(usev jack)
			$(usev sdl)
			$(usev alsa)
			$(usev oss)
		)
		conf_opts+=(
			--audio-drv-list=$(printf "%s," "${audio_opts[@]}")
		)
	fi

	case ${buildtype} in
	user)
		conf_opts+=(
			--enable-linux-user
			--disable-system
			--disable-blobs
			--disable-tools
		)
		local static_flag="static-user"
		;;
	softmmu)
		conf_opts+=(
			--disable-linux-user
			--enable-system
			--disable-tools
		)
		local static_flag="static"
		;;
	tools)
		conf_opts+=(
			--disable-linux-user
			--disable-system
			--disable-blobs
			--enable-tools
		)
		local static_flag="static"
		;;
	esac

	local targets="${buildtype}_targets"
	[[ -n ${targets} ]] && conf_opts+=( --target-list="${!targets}" )

	# Add support for SystemTAP
	use systemtap && conf_opts+=( --enable-trace-backend=dtrace )

	# We always want to attempt to build with PIE support as it results
	# in a more secure binary. But it doesn't work with static or if
	# the current GCC doesn't have PIE support.
	if use ${static_flag}; then
		conf_opts+=( --static --disable-pie )
	else
		tc-enables-pie && conf_opts+=( --enable-pie )
	fi

	# Meson will not use a cross-file unless cross_prefix is set.
	tc-is-cross-compiler && conf_opts+=( --cross-prefix="${CHOST}-" )

	# Plumb through equivalent of EXTRA_ECONF to allow experiments
	# like bug #747928.
	conf_opts+=( ${EXTRA_CONF_QEMU} )

	echo "../configure ${conf_opts[*]}"
	cd "${builddir}"
	../configure "${conf_opts[@]}" || die "configure failed"

	# FreeBSD's kernel does not support QEMU assigning/grabbing
	# host USB devices yet
	use kernel_FreeBSD && \
		sed -i -E -e "s|^(HOST_USB=)bsd|\1stub|" "${S}"/config-host.mak
}

src_configure() {
	local target

	python_setup

	softmmu_targets= softmmu_bins=()
	user_targets= user_bins=()

	for target in ${IUSE_SOFTMMU_TARGETS} ; do
		if use "qemu_softmmu_targets_${target}"; then
			softmmu_targets+=",${target}-softmmu"
			softmmu_bins+=( "qemu-system-${target}" )
		fi
	done

	for target in ${IUSE_USER_TARGETS} ; do
		if use "qemu_user_targets_${target}"; then
			user_targets+=",${target}-linux-user"
			user_bins+=( "qemu-${target}" )
		fi
	done

	softmmu_targets=${softmmu_targets#,}
	user_targets=${user_targets#,}

	[[ -n ${softmmu_targets} ]] && qemu_src_configure "softmmu"
	[[ -n ${user_targets}    ]] && qemu_src_configure "user"
	qemu_src_configure "tools"
}

src_compile() {
	if [[ -n ${user_targets} ]]; then
		cd "${S}/user-build"
		default
	fi

	if [[ -n ${softmmu_targets} ]]; then
		cd "${S}/softmmu-build"
		default
	fi

	cd "${S}/tools-build"
	default
}

src_test() {
	if [[ -n ${softmmu_targets} ]]; then
		cd "${S}/softmmu-build"
		pax-mark m */qemu-system-* #515550
		emake check
	fi
}

qemu_python_install() {
	python_domodule "${S}/python/qemu"

	python_doscript "${S}/scripts/kvm/vmxcap"
	python_doscript "${S}/scripts/qmp/qmp-shell"
	python_doscript "${S}/scripts/qmp/qemu-ga-client"
}

# Generate binfmt support files.
#   - /etc/init.d/qemu-binfmt script which registers the user handlers (openrc)
#   - /usr/share/qemu/binfmt.d/qemu.conf (for use with systemd-binfmt)
generate_initd() {
	local out="${T}/qemu-binfmt"
	local out_systemd="${T}/qemu.conf"
	local d="${T}/binfmt.d"

	einfo "Generating qemu binfmt scripts and configuration files"

	# Generate the debian fragments first.
	mkdir -p "${d}"
	"${S}"/scripts/qemu-binfmt-conf.sh \
		--debian \
		--exportdir "${d}" \
		--qemu-path "${EPREFIX}/usr/bin" \
		|| die
	# Then turn the fragments into a shell script we can source.
	sed -E -i \
		-e 's:^([^ ]+) (.*)$:\1="\2":' \
		"${d}"/* || die

	# Generate the init.d script by assembling the fragments from above.
	local f qcpu package interpreter magic mask
	cat "${FILESDIR}"/qemu-binfmt.initd.head >"${out}" || die
	for f in "${d}"/qemu-* ; do
		source "${f}"

		# Normalize the cpu logic like we do in the init.d for the native cpu.
		qcpu=${package#qemu-}
		case ${qcpu} in
		arm*)   qcpu="arm";;
		mips*)  qcpu="mips";;
		ppc*)   qcpu="ppc";;
		s390*)  qcpu="s390";;
		sh*)    qcpu="sh";;
		sparc*) qcpu="sparc";;
		esac

		# we use 'printf' here to be portable across 'sh'
		# implementations: #679168
		cat <<EOF >>"${out}"
	if [ "\${cpu}" != "${qcpu}" -a -x "${interpreter}" ] ; then
		printf '%s\n' ':${package}:M::${magic}:${mask}:${interpreter}:'"\${QEMU_BINFMT_FLAGS}" >/proc/sys/fs/binfmt_misc/register
	fi
EOF

		echo ":${package}:M::${magic}:${mask}:${interpreter}:OC" >>"${out_systemd}"

	done
	cat "${FILESDIR}"/qemu-binfmt.initd.tail >>"${out}" || die
}

src_install() {
	if [[ -n ${user_targets} ]]; then
		cd "${S}/user-build"
		emake DESTDIR="${ED}" install

		# Install binfmt handler init script for user targets.
		generate_initd
		doinitd "${T}/qemu-binfmt"

		# Install binfmt/qemu.conf.
		insinto "/usr/share/qemu/binfmt.d"
		doins "${T}/qemu.conf"
	fi

	if [[ -n ${softmmu_targets} ]]; then
		cd "${S}/softmmu-build"
		emake DESTDIR="${ED}" install

		# This might not exist if the test failed. #512010
		[[ -e check-report.html ]] && dodoc check-report.html

		if use kernel_linux; then
			udev_newrules "${FILESDIR}"/65-kvm.rules-r2 65-kvm.rules
		fi

		if use python; then
			python_foreach_impl qemu_python_install
		fi
	fi

	cd "${S}/tools-build"
	emake DESTDIR="${ED}" install

	# Disable mprotect on the qemu binaries as they use JITs to be fast #459348
	pushd "${ED}"/usr/bin >/dev/null
	pax-mark mr "${softmmu_bins[@]}" "${user_bins[@]}" # bug 575594
	popd >/dev/null

	# Install config file example for qemu-bridge-helper
	insinto "/etc/qemu"
	doins "${FILESDIR}/bridge.conf"

	cd "${S}"
	dodoc MAINTAINERS docs/specs/pci-ids.txt
	newdoc pc-bios/README README.pc-bios

	# Disallow stripping of prebuilt firmware files.
	dostrip -x ${QA_PREBUILT}

	if [[ -n ${softmmu_targets} ]]; then
		# Remove SeaBIOS since we're using the SeaBIOS packaged one
		rm "${ED}/usr/share/qemu/bios.bin"
		rm "${ED}/usr/share/qemu/bios-256k.bin"
		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
			dosym ../seabios/bios.bin /usr/share/qemu/bios.bin
			dosym ../seabios/bios-256k.bin /usr/share/qemu/bios-256k.bin
		fi

		# Remove vgabios since we're using the seavgabios packaged one
		rm "${ED}/usr/share/qemu/vgabios.bin"
		rm "${ED}/usr/share/qemu/vgabios-cirrus.bin"
		rm "${ED}/usr/share/qemu/vgabios-qxl.bin"
		rm "${ED}/usr/share/qemu/vgabios-stdvga.bin"
		rm "${ED}/usr/share/qemu/vgabios-virtio.bin"
		rm "${ED}/usr/share/qemu/vgabios-vmware.bin"
		# PPC/PPC64 loads vgabios-stdvga
		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386 || use qemu_softmmu_targets_ppc || use qemu_softmmu_targets_ppc64; then
			dosym ../seavgabios/vgabios-isavga.bin /usr/share/qemu/vgabios.bin
			dosym ../seavgabios/vgabios-cirrus.bin /usr/share/qemu/vgabios-cirrus.bin
			dosym ../seavgabios/vgabios-qxl.bin /usr/share/qemu/vgabios-qxl.bin
			dosym ../seavgabios/vgabios-stdvga.bin /usr/share/qemu/vgabios-stdvga.bin
			dosym ../seavgabios/vgabios-virtio.bin /usr/share/qemu/vgabios-virtio.bin
			dosym ../seavgabios/vgabios-vmware.bin /usr/share/qemu/vgabios-vmware.bin
		fi

		# Remove sgabios since we're using the sgabios packaged one
		rm "${ED}/usr/share/qemu/sgabios.bin"
		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
			dosym ../sgabios/sgabios.bin /usr/share/qemu/sgabios.bin
		fi

		# Remove iPXE since we're using the iPXE packaged one
		rm "${ED}"/usr/share/qemu/pxe-*.rom
		if use qemu_softmmu_targets_x86_64 || use qemu_softmmu_targets_i386; then
			dosym ../ipxe/8086100e.rom /usr/share/qemu/pxe-e1000.rom
			dosym ../ipxe/80861209.rom /usr/share/qemu/pxe-eepro100.rom
			dosym ../ipxe/10500940.rom /usr/share/qemu/pxe-ne2k_pci.rom
			dosym ../ipxe/10222000.rom /usr/share/qemu/pxe-pcnet.rom
			dosym ../ipxe/10ec8139.rom /usr/share/qemu/pxe-rtl8139.rom
			dosym ../ipxe/1af41000.rom /usr/share/qemu/pxe-virtio.rom
		fi
	fi

	DISABLE_AUTOFORMATTING=true
	readme.gentoo_create_doc
}

firmware_abi_change() {
	local pv
	for pv in ${REPLACING_VERSIONS}; do
		if ver_test $pv -lt ${FIRMWARE_ABI_VERSION}; then
			return 0
		fi
	done
	return 1
}

pkg_postinst() {
	if [[ -n ${softmmu_targets} ]] && use kernel_linux; then
		udev_reload
	fi

	xdg_icon_cache_update

	[[ -z ${EPREFIX} ]] && [[ -f ${EROOT}/usr/libexec/qemu-bridge-helper ]] && \
		fcaps cap_net_admin ${EROOT}/usr/libexec/qemu-bridge-helper

	DISABLE_AUTOFORMATTING=true
	readme.gentoo_print_elog

	if use pin-upstream-blobs && firmware_abi_change; then
		ewarn "This version of qemu pins new versions of firmware blobs:"
		ewarn "	$(best_version sys-firmware/edk2-ovmf)"
		ewarn "	$(best_version sys-firmware/ipxe)"
		ewarn "	$(best_version sys-firmware/seabios)"
		ewarn "	$(best_version sys-firmware/sgabios)"
		ewarn "This might break resume of hibernated guests (started with a different"
		ewarn "firmware version) and live migration to/from qemu versions with different"
		ewarn "firmware. Please (cold) restart all running guests. For functional"
		ewarn "guest migration ensure that all"
		ewarn "hosts run at least"
		ewarn "	app-emulation/qemu-${FIRMWARE_ABI_VERSION}."
	fi
}

pkg_info() {
	echo "Using:"
	echo "  $(best_version app-emulation/spice-protocol)"
	echo "  $(best_version sys-firmware/edk2-ovmf)"
	if has_version 'sys-firmware/edk2-ovmf[binary]'; then
		echo "    USE=binary"
	else
		echo "    USE=''"
	fi
	echo "  $(best_version sys-firmware/ipxe)"
	echo "  $(best_version sys-firmware/seabios)"
	if has_version 'sys-firmware/seabios[binary]'; then
		echo "    USE=binary"
	else
		echo "    USE=''"
	fi
	echo "  $(best_version sys-firmware/sgabios)"
}

pkg_postrm() {
	xdg_icon_cache_update
}