| From d31df03f34433ae313f782436656561bfc14400b Mon Sep 17 00:00:00 2001 |
| From: David Ruth <druth@google.com> |
| Date: Wed, 16 Mar 2022 23:47:27 +0000 |
| Subject: [PATCH] BACKPORT: sync nl80211.h to v5.8 |
| |
| Sync the entire nl80211.h file with kernel version 5.8. This allows |
| using the new command NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, and |
| brings the entire file up to date. |
| --- |
| include/uapi/linux/nl80211.h | 1615 ++++++++++++++++++++++++++++++++-- |
| 1 file changed, 1560 insertions(+), 55 deletions(-) |
| |
| diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h |
| index 51626b4..4e6339a 100644 |
| --- a/include/uapi/linux/nl80211.h |
| +++ b/include/uapi/linux/nl80211.h |
| @@ -11,6 +11,7 @@ |
| * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> |
| * Copyright 2008 Colin McCabe <colin@cozybit.com> |
| * Copyright 2015-2017 Intel Deutschland GmbH |
| + * Copyright (C) 2018-2020 Intel Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| @@ -51,6 +52,11 @@ |
| #define NL80211_MULTICAST_GROUP_NAN "nan" |
| #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" |
| |
| +#define NL80211_EDMG_BW_CONFIG_MIN 4 |
| +#define NL80211_EDMG_BW_CONFIG_MAX 15 |
| +#define NL80211_EDMG_CHANNELS_MIN 1 |
| +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ |
| + |
| /** |
| * DOC: Station handling |
| * |
| @@ -203,7 +209,8 @@ |
| * FILS shared key authentication offload should be able to construct the |
| * authentication and association frames for FILS shared key authentication and |
| * eventually do a key derivation as per IEEE 802.11ai. The below additional |
| - * parameters should be given to driver in %NL80211_CMD_CONNECT. |
| + * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in |
| + * %NL80211_CMD_UPDATE_CONNECT_PARAMS. |
| * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai |
| * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai |
| * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message |
| @@ -214,7 +221,8 @@ |
| * as specified in IETF RFC 6696. |
| * |
| * When FILS shared key authentication is completed, driver needs to provide the |
| - * below additional parameters to userspace. |
| + * below additional parameters to userspace, which can be either after setting |
| + * up a connection or after roaming. |
| * %NL80211_ATTR_FILS_KEK - used for key renewal |
| * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges |
| * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated |
| @@ -231,6 +239,54 @@ |
| * use in a FILS shared key connection with PMKSA caching. |
| */ |
| |
| +/** |
| + * DOC: SAE authentication offload |
| + * |
| + * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they |
| + * support offloading SAE authentication for WPA3-Personal networks. In |
| + * %NL80211_CMD_CONNECT the password for SAE should be specified using |
| + * %NL80211_ATTR_SAE_PASSWORD. |
| + */ |
| + |
| +/** |
| + * DOC: VLAN offload support for setting group keys and binding STAs to VLANs |
| + * |
| + * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they |
| + * support offloading VLAN functionality in a manner where the driver exposes a |
| + * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs |
| + * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet |
| + * case. Frames received from stations that are not assigned to any VLAN are |
| + * delivered on the main netdev and frames to such stations can be sent through |
| + * that main netdev. |
| + * |
| + * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and |
| + * %NL80211_CMD_SET_STATION will optionally specify vlan_id using |
| + * %NL80211_ATTR_VLAN_ID. |
| + */ |
| + |
| +/** |
| + * DOC: TID configuration |
| + * |
| + * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG |
| + * attribute given in wiphy capabilities. |
| + * |
| + * The necessary configuration parameters are mentioned in |
| + * &enum nl80211_tid_config_attr and it will be passed to the |
| + * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. |
| + * |
| + * If the configuration needs to be applied for specific peer then the MAC |
| + * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the |
| + * configuration will be applied for all the connected peers in the vif except |
| + * any peers that have peer specific configuration for the TID by default; if |
| + * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values |
| + * will be overwritten. |
| + * |
| + * All this configuration is valid only for STA's current connection |
| + * i.e. the configuration will be reset to default when the STA connects back |
| + * after disconnection/roaming, and this configuration will be cleared when |
| + * the interface goes down. |
| + */ |
| + |
| /** |
| * enum nl80211_commands - supported nl80211 commands |
| * |
| @@ -240,13 +296,14 @@ |
| * to get a list of all present wiphys. |
| * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
| * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
| - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the |
| - * attributes determining the channel width; this is used for setting |
| - * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, |
| - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, |
| - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. |
| - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL |
| - * instead, the support here is for backward compatibility only. |
| + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, |
| + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the |
| + * channel width; this is used for setting monitor mode channel), |
| + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, |
| + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or |
| + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, |
| + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward |
| + * compatibility only. |
| * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
| * or rename notification. Has attributes %NL80211_ATTR_WIPHY and |
| * %NL80211_ATTR_WIPHY_NAME. |
| @@ -295,7 +352,8 @@ |
| * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, |
| * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. |
| * The channel to use can be set on the interface or be given using the |
| - * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. |
| + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the |
| + * attributes determining channel width. |
| * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP |
| * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface |
| * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP |
| @@ -480,11 +538,12 @@ |
| * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and |
| * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify |
| * the SSID (mainly for association, but is included in authentication |
| - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used |
| - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE |
| - * is used to specify the authentication type. %NL80211_ATTR_IE is used to |
| - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) |
| - * to be added to the frame. |
| + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + |
| + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the |
| + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the |
| + * authentication type. %NL80211_ATTR_IE is used to define IEs |
| + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added |
| + * to the frame. |
| * When used as an event, this reports reception of an Authentication |
| * frame in station and IBSS modes when the local MLME processed the |
| * frame, i.e., it was for the local STA and was received in correct |
| @@ -539,10 +598,12 @@ |
| * requests to connect to a specified network but without separating |
| * auth and assoc steps. For this, you need to specify the SSID in a |
| * %NL80211_ATTR_SSID attribute, and can optionally specify the association |
| - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, |
| - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, |
| + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, |
| + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, |
| + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, |
| * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and |
| + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, |
| + * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and |
| * %NL80211_ATTR_WIPHY_FREQ_HINT. |
| * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are |
| * restrictions on BSS selection, i.e., they effectively prevent roaming |
| @@ -553,6 +614,14 @@ |
| * set of BSSID,frequency parameters is used (i.e., either the enforcing |
| * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict |
| * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). |
| + * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if |
| + * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is |
| + * included, these IEs through %NL80211_ATTR_IE are specified by the user |
| + * space based on the best possible BSS selected. Thus, if the driver ends |
| + * up selecting a different BSS, it can modify these IEs accordingly (e.g. |
| + * userspace asks the driver to perform PMKSA caching with BSS1 and the |
| + * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE |
| + * has to get updated with the apt PMKID). |
| * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within |
| * the ESS in case the device is already associated and an association with |
| * a different BSS is desired. |
| @@ -569,13 +638,14 @@ |
| * authentication/association or not receiving a response from the AP. |
| * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as |
| * well to remain backwards compatible. |
| - * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself. |
| - * When the driver roamed in a network that requires 802.1X authentication, |
| - * %NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication |
| - * was done by the driver or if roaming was done using Fast Transition |
| - * protocol (in which case 802.1X authentication is not needed). If |
| - * %NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for |
| - * the 802.1X authentication. |
| + * When establishing a security association, drivers that support 4 way |
| + * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when |
| + * the 4 way handshake is completed successfully. |
| + * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. |
| + * When a security association was established with the new AP (e.g. if |
| + * the FT protocol was used for roaming or the driver completed the 4 way |
| + * handshake), this event should be followed by an |
| + * %NL80211_CMD_PORT_AUTHORIZED event. |
| * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify |
| * userspace that a connection was dropped by the AP or due to other |
| * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and |
| @@ -621,6 +691,10 @@ |
| * four bytes for vendor frames including the OUI. The registration |
| * cannot be dropped, but is removed automatically when the netlink |
| * socket is closed. Multiple registrations can be made. |
| + * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if |
| + * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which |
| + * case the registration can also be modified to include/exclude the |
| + * flag, rather than requiring unregistration to change it. |
| * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for |
| * backward compatibility |
| * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This |
| @@ -643,7 +717,9 @@ |
| * is used during CSA period. |
| * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this |
| * command may be used with the corresponding cookie to cancel the wait |
| - * time if it is known that it is no longer necessary. |
| + * time if it is known that it is no longer necessary. This command is |
| + * also sent as an event whenever the driver has completed the off-channel |
| + * wait time. |
| * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. |
| * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame |
| * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies |
| @@ -718,7 +794,7 @@ |
| * various triggers. These triggers can be configured through this |
| * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For |
| * more background information, see |
| - * http://wireless.kernel.org/en/users/Documentation/WoWLAN. |
| + * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. |
| * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification |
| * from the driver reporting the wakeup reason. In this case, the |
| * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason |
| @@ -976,12 +1052,123 @@ |
| * only the %NL80211_ATTR_IE data is used and updated with this command. |
| * |
| * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 |
| - * for the given authenticator address (specified with &NL80211_ATTR_MAC). |
| - * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the |
| + * for the given authenticator address (specified with %NL80211_ATTR_MAC). |
| + * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the |
| * PMK-R0, otherwise it specifies the PMK. |
| * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously |
| * configured PMK for the authenticator address identified by |
| - * &NL80211_ATTR_MAC. |
| + * %NL80211_ATTR_MAC. |
| + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way |
| + * handshake was completed successfully by the driver. The BSSID is |
| + * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake |
| + * offload should send this event after indicating 802.11 association with |
| + * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed |
| + * %NL80211_CMD_DISCONNECT should be indicated instead. |
| + * |
| + * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request |
| + * and RX notification. This command is used both as a request to transmit |
| + * a control port frame and as a notification that a control port frame |
| + * has been received. %NL80211_ATTR_FRAME is used to specify the |
| + * frame contents. The frame is the raw EAPoL data, without ethernet or |
| + * 802.11 headers. |
| + * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
| + * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added |
| + * indicating the protocol type of the received frame; whether the frame |
| + * was received unencrypted and the MAC address of the peer respectively. |
| + * |
| + * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. |
| + * |
| + * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host |
| + * drivers that do not define separate commands for authentication and |
| + * association, but rely on user space for the authentication to happen. |
| + * This interface acts both as the event request (driver to user space) |
| + * to trigger the authentication and command response (userspace to |
| + * driver) to indicate the authentication status. |
| + * |
| + * User space uses the %NL80211_CMD_CONNECT command to the host driver to |
| + * trigger a connection. The host driver selects a BSS and further uses |
| + * this interface to offload only the authentication part to the user |
| + * space. Authentication frames are passed between the driver and user |
| + * space through the %NL80211_CMD_FRAME interface. Host driver proceeds |
| + * further with the association after getting successful authentication |
| + * status. User space indicates the authentication status through |
| + * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH |
| + * command interface. |
| + * |
| + * Host driver reports this status on an authentication failure to the |
| + * user space through the connect result as the user space would have |
| + * initiated the connection through the connect request. |
| + * |
| + * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's |
| + * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, |
| + * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its |
| + * address(specified in %NL80211_ATTR_MAC). |
| + * |
| + * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in |
| + * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. |
| + * |
| + * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) |
| + * with the given parameters, which are encapsulated in the nested |
| + * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address |
| + * randomization may be enabled and configured by specifying the |
| + * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. |
| + * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. |
| + * A u64 cookie for further %NL80211_ATTR_COOKIE use is is returned in |
| + * the netlink extended ack message. |
| + * |
| + * To cancel a measurement, close the socket that requested it. |
| + * |
| + * Measurement results are reported to the socket that requested the |
| + * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they |
| + * become available, so applications must ensure a large enough socket |
| + * buffer size. |
| + * |
| + * Depending on driver support it may or may not be possible to start |
| + * multiple concurrent measurements. |
| + * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the |
| + * result notification from the driver to the requesting socket. |
| + * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that |
| + * the measurement completed, using the measurement cookie |
| + * (%NL80211_ATTR_COOKIE). |
| + * |
| + * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was |
| + * detected and reported by a neighboring device on the channel |
| + * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes |
| + * determining the width and type. |
| + * |
| + * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to |
| + * offload OWE processing to user space. This intends to support |
| + * OWE AKM by the host drivers that implement SME but rely |
| + * on the user space for the cryptographic/DH IE processing in AP mode. |
| + * |
| + * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric |
| + * refreshing, is that from one mesh point we be able to send some data |
| + * frames to other mesh points which are not currently selected as a |
| + * primary traffic path, but which are only 1 hop away. The absence of |
| + * the primary path to the chosen node makes it necessary to apply some |
| + * form of marking on a chosen packet stream so that the packets can be |
| + * properly steered to the selected node for testing, and not by the |
| + * regular mesh path lookup. Further, the packets must be of type data |
| + * so that the rate control (often embedded in firmware) is used for |
| + * rate selection. |
| + * |
| + * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh |
| + * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame |
| + * content. The frame is ethernet data. |
| + * |
| + * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration |
| + * is passed using %NL80211_ATTR_TID_CONFIG attribute. |
| + * |
| + * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon |
| + * frame. This event is used to indicate that a received Beacon frame was |
| + * dropped because it did not include a valid MME MIC while beacon |
| + * protection was enabled (BIGTK configured in station mode). |
| + * |
| + * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control |
| + * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. |
| + * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME |
| + * includes the contents of the frame. %NL80211_ATTR_ACK flag is included |
| + * if the recipient acknowledged the frame. |
| * |
| * @NL80211_CMD_MAX: highest used command number |
| * @__NL80211_CMD_AFTER_LAST: internal use |
| @@ -1185,6 +1372,34 @@ enum nl80211_commands { |
| NL80211_CMD_SET_PMK, |
| NL80211_CMD_DEL_PMK, |
| |
| + NL80211_CMD_PORT_AUTHORIZED, |
| + |
| + NL80211_CMD_RELOAD_REGDB, |
| + |
| + NL80211_CMD_EXTERNAL_AUTH, |
| + |
| + NL80211_CMD_STA_OPMODE_CHANGED, |
| + |
| + NL80211_CMD_CONTROL_PORT_FRAME, |
| + |
| + NL80211_CMD_GET_FTM_RESPONDER_STATS, |
| + |
| + NL80211_CMD_PEER_MEASUREMENT_START, |
| + NL80211_CMD_PEER_MEASUREMENT_RESULT, |
| + NL80211_CMD_PEER_MEASUREMENT_COMPLETE, |
| + |
| + NL80211_CMD_NOTIFY_RADAR, |
| + |
| + NL80211_CMD_UPDATE_OWE_INFO, |
| + |
| + NL80211_CMD_PROBE_MESH_LINK, |
| + |
| + NL80211_CMD_SET_TID_CONFIG, |
| + |
| + NL80211_CMD_UNPROT_BEACON, |
| + |
| + NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, |
| + |
| /* add new commands above here */ |
| |
| /* used to define NL80211_CMD_MAX below */ |
| @@ -1230,7 +1445,8 @@ enum nl80211_commands { |
| * of &enum nl80211_chan_width, describing the channel width. See the |
| * documentation of the enum for more information. |
| * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the |
| - * channel, used for anything but 20 MHz bandwidth |
| + * channel, used for anything but 20 MHz bandwidth. In S1G this is the |
| + * operating channel center frequency. |
| * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the |
| * channel, used only for 80+80 MHz bandwidth |
| * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
| @@ -1407,8 +1623,12 @@ enum nl80211_commands { |
| * |
| * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is |
| * used for the association (&enum nl80211_mfp, represented as a u32); |
| - * this attribute can be used |
| - * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests |
| + * this attribute can be used with %NL80211_CMD_ASSOCIATE and |
| + * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for |
| + * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it |
| + * must have decided whether to use management frame protection or not. |
| + * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will |
| + * let the driver (or the firmware) decide whether to use MFP or not. |
| * |
| * @NL80211_ATTR_STA_FLAGS2: Attribute containing a |
| * &struct nl80211_sta_flag_update. |
| @@ -1428,6 +1648,16 @@ enum nl80211_commands { |
| * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with |
| * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom |
| * ethertype frames used for key negotiation must not be encrypted. |
| + * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control |
| + * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) |
| + * will be sent directly to the network interface or sent via the NL80211 |
| + * socket. If this attribute is missing, then legacy behavior of sending |
| + * control port frames directly to the network interface is used. If the |
| + * flag is included, then control port frames are sent over NL80211 instead |
| + * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is |
| + * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER |
| + * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth |
| + * frames are not forwared over the control port. |
| * |
| * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. |
| * We recommend using nested, driver-specific attributes within this. |
| @@ -1452,6 +1682,12 @@ enum nl80211_commands { |
| * (a u32 with flags from &enum nl80211_wpa_versions). |
| * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
| * indicate which key management algorithm(s) to use (an array of u32). |
| + * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, |
| + * indicating the supported AKM suites, intended for specific drivers which |
| + * implement SME and have constraints on which AKMs are supported and also |
| + * the cases where an AKM support is offloaded to the driver/firmware. |
| + * If there is no such notification from the driver, user space should |
| + * assume the driver supports all the AKM suites. |
| * |
| * @NL80211_ATTR_REQ_IE: (Re)association request information elements as |
| * sent out by the card, for ROAM and successful CONNECT events. |
| @@ -1628,7 +1864,7 @@ enum nl80211_commands { |
| * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID |
| * is included in the probe request, but the match attributes |
| * will never let it go through), -EINVAL may be returned. |
| - * If ommited, no filtering is done. |
| + * If omitted, no filtering is done. |
| * |
| * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported |
| * interface combinations. In each nested item, it contains attributes |
| @@ -1733,7 +1969,7 @@ enum nl80211_commands { |
| * |
| * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be |
| * used by the drivers which has MLME in firmware and does not have support |
| - * to report per station tx/rx activity to free up the staion entry from |
| + * to report per station tx/rx activity to free up the station entry from |
| * the list. This needs to be used when the driver advertises the |
| * capability to timeout the stations. |
| * |
| @@ -1915,6 +2151,12 @@ enum nl80211_commands { |
| * multicast group. |
| * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the |
| * station will deauthenticate when the socket is closed. |
| + * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically |
| + * torn down when the socket is closed. |
| + * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be |
| + * automatically torn down when the socket is closed. |
| + * If set during %NL80211_CMD_START_AP the AP will be automatically |
| + * disabled when the socket is closed. |
| * |
| * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is |
| * the TDLS link initiator. |
| @@ -2088,7 +2330,7 @@ enum nl80211_commands { |
| * |
| * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in |
| * the specified band is to be adjusted before doing |
| - * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out |
| + * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out |
| * better BSSs. The attribute value is a packed structure |
| * value as specified by &struct nl80211_bss_select_rssi_adjust. |
| * |
| @@ -2134,10 +2376,134 @@ enum nl80211_commands { |
| * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it |
| * wants to use the supported offload of the 4-way handshake. |
| * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. |
| - * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED |
| - * notification indicating that that 802.1X authentication was done by |
| - * the driver or is not needed (because roaming used the Fast Transition |
| - * protocol). |
| + * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) |
| + * |
| + * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external |
| + * authentication operation (u32 attribute with an |
| + * &enum nl80211_external_auth_action value). This is used with the |
| + * %NL80211_CMD_EXTERNAL_AUTH request event. |
| + * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user |
| + * space supports external authentication. This attribute shall be used |
| + * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver |
| + * may offload authentication processing to user space if this capability |
| + * is indicated in the respective requests from the user space. |
| + * |
| + * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this |
| + * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. |
| + * |
| + * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum |
| + * nl80211_txq_stats) |
| + * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. |
| + * The smaller of this and the memory limit is enforced. |
| + * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the |
| + * TXQ queues for this phy. The smaller of this and the packet limit is |
| + * enforced. |
| + * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes |
| + * a flow is assigned on each round of the DRR scheduler. |
| + * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from |
| + * association request when used with NL80211_CMD_NEW_STATION). Can be set |
| + * only if %NL80211_STA_FLAG_WME is set. |
| + * |
| + * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include |
| + * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing |
| + * measurement (FTM) responder functionality and containing parameters as |
| + * possible, see &enum nl80211_ftm_responder_attr |
| + * |
| + * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder |
| + * statistics, see &enum nl80211_ftm_responder_stats. |
| + * |
| + * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), |
| + * if the attribute is not given no timeout is requested. Note that 0 is an |
| + * invalid value. |
| + * |
| + * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) |
| + * data, uses nested attributes specified in |
| + * &enum nl80211_peer_measurement_attrs. |
| + * This is also used for capability advertisement in the wiphy information, |
| + * with the appropriate sub-attributes. |
| + * |
| + * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime |
| + * scheduler. |
| + * |
| + * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for |
| + * station associated with the AP. See &enum nl80211_tx_power_setting for |
| + * possible values. |
| + * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This |
| + * allows to set Tx power for a station. If this attribute is not included, |
| + * the default per-interface tx power setting will be overriding. Driver |
| + * should be picking up the lowest tx power, either tx power per-interface |
| + * or per-station. |
| + * |
| + * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It |
| + * is used with %NL80211_CMD_CONNECT to provide password for offloading |
| + * SAE authentication for WPA3-Personal networks. |
| + * |
| + * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. |
| + * |
| + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection |
| + * functionality. |
| + * |
| + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz |
| + * channel(s) that are allowed to be used for EDMG transmissions. |
| + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) |
| + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes |
| + * the allowed channel bandwidth configurations. (u8 attribute) |
| + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. |
| + * |
| + * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key |
| + * (u16). |
| + * |
| + * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. |
| + * |
| + * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry |
| + * using attributes from &enum nl80211_iftype_akm_attributes. This |
| + * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating |
| + * supported AKM suites capability per interface. AKMs advertised in |
| + * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not |
| + * advertised for a specific interface type. |
| + * |
| + * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a |
| + * nested attribute with &enum nl80211_tid_config_attr sub-attributes; |
| + * on output (in wiphy attributes) it contains only the feature sub- |
| + * attributes. |
| + * |
| + * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control |
| + * port in order to forward/receive them as ordinary data frames. |
| + * |
| + * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, |
| + * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). |
| + * An optional parameter configured through %NL80211_CMD_SET_PMKSA. |
| + * Drivers that trigger roaming need to know the lifetime of the |
| + * configured PMKSA for triggering the full vs. PMKSA caching based |
| + * authentication. This timeout helps authentication methods like SAE, |
| + * where PMK gets updated only by going through a full (new SAE) |
| + * authentication instead of getting updated during an association for EAP |
| + * authentication. No new full authentication within the PMK expiry shall |
| + * result in a disassociation at the end of the lifetime. |
| + * |
| + * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in |
| + * terms of percentage of %NL80211_ATTR_PMK_LIFETIME |
| + * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional |
| + * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the |
| + * driver to trigger a full authentication roam (without PMKSA caching) |
| + * after the reauthentication threshold time, but before the PMK lifetime |
| + * has expired. |
| + * |
| + * Authentication methods like SAE need to be able to generate a new PMKSA |
| + * entry without having to force a disconnection after the PMK timeout. If |
| + * no roaming occurs between the reauth threshold and PMK expiration, |
| + * disassociation is still forced. |
| + * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the |
| + * %NL80211_CMD_REGISTER_FRAME command, see the description there. |
| + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated |
| + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with |
| + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. |
| + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the |
| + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. |
| + * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies |
| + * |
| + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from |
| + * association request when used with NL80211_CMD_NEW_STATION). |
| * |
| * @NUM_NL80211_ATTR: total number of nl80211_attrs available |
| * @NL80211_ATTR_MAX: highest attribute number currently defined |
| @@ -2565,6 +2931,62 @@ enum nl80211_attrs { |
| NL80211_ATTR_PMKR0_NAME, |
| NL80211_ATTR_PORT_AUTHORIZED, |
| |
| + NL80211_ATTR_EXTERNAL_AUTH_ACTION, |
| + NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, |
| + |
| + NL80211_ATTR_NSS, |
| + NL80211_ATTR_ACK_SIGNAL, |
| + |
| + NL80211_ATTR_CONTROL_PORT_OVER_NL80211, |
| + |
| + NL80211_ATTR_TXQ_STATS, |
| + NL80211_ATTR_TXQ_LIMIT, |
| + NL80211_ATTR_TXQ_MEMORY_LIMIT, |
| + NL80211_ATTR_TXQ_QUANTUM, |
| + |
| + NL80211_ATTR_HE_CAPABILITY, |
| + |
| + NL80211_ATTR_FTM_RESPONDER, |
| + |
| + NL80211_ATTR_FTM_RESPONDER_STATS, |
| + |
| + NL80211_ATTR_TIMEOUT, |
| + |
| + NL80211_ATTR_PEER_MEASUREMENTS, |
| + |
| + NL80211_ATTR_AIRTIME_WEIGHT, |
| + NL80211_ATTR_STA_TX_POWER_SETTING, |
| + NL80211_ATTR_STA_TX_POWER, |
| + |
| + NL80211_ATTR_SAE_PASSWORD, |
| + |
| + NL80211_ATTR_TWT_RESPONDER, |
| + |
| + NL80211_ATTR_HE_OBSS_PD, |
| + |
| + NL80211_ATTR_WIPHY_EDMG_CHANNELS, |
| + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, |
| + |
| + NL80211_ATTR_VLAN_ID, |
| + |
| + NL80211_ATTR_HE_BSS_COLOR, |
| + |
| + NL80211_ATTR_IFTYPE_AKM_SUITES, |
| + |
| + NL80211_ATTR_TID_CONFIG, |
| + |
| + NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, |
| + |
| + NL80211_ATTR_PMK_LIFETIME, |
| + NL80211_ATTR_PMK_REAUTH_THRESHOLD, |
| + |
| + NL80211_ATTR_RECEIVE_MULTICAST, |
| + NL80211_ATTR_WIPHY_FREQ_OFFSET, |
| + NL80211_ATTR_CENTER_FREQ1_OFFSET, |
| + NL80211_ATTR_SCAN_FREQ_KHZ, |
| + |
| + NL80211_ATTR_HE_6GHZ_CAPABILITY, |
| + |
| /* add attributes here, update the policy in nl80211.c */ |
| |
| __NL80211_ATTR_AFTER_LAST, |
| @@ -2604,15 +3026,18 @@ enum nl80211_attrs { |
| #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS |
| #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS |
| |
| +#define NL80211_WIPHY_NAME_MAXLEN 64 |
| + |
| #define NL80211_MAX_SUPP_RATES 32 |
| #define NL80211_MAX_SUPP_HT_RATES 77 |
| -#define NL80211_MAX_SUPP_REG_RULES 64 |
| +#define NL80211_MAX_SUPP_REG_RULES 128 |
| #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
| #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 |
| #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 |
| #define NL80211_HT_CAPABILITY_LEN 26 |
| #define NL80211_VHT_CAPABILITY_LEN 12 |
| - |
| +#define NL80211_HE_MIN_CAPABILITY_LEN 16 |
| +#define NL80211_HE_MAX_CAPABILITY_LEN 54 |
| #define NL80211_MAX_NR_CIPHER_SUITES 5 |
| #define NL80211_MAX_NR_AKM_SUITES 2 |
| |
| @@ -2739,6 +3164,38 @@ struct nl80211_sta_flag_update { |
| __u32 set; |
| } __attribute__((packed)); |
| |
| +/** |
| + * enum nl80211_he_gi - HE guard interval |
| + * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec |
| + * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec |
| + * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec |
| + */ |
| +enum nl80211_he_gi { |
| + NL80211_RATE_INFO_HE_GI_0_8, |
| + NL80211_RATE_INFO_HE_GI_1_6, |
| + NL80211_RATE_INFO_HE_GI_3_2, |
| +}; |
| + |
| +/** |
| + * enum nl80211_he_ru_alloc - HE RU allocation values |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation |
| + * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation |
| + */ |
| +enum nl80211_he_ru_alloc { |
| + NL80211_RATE_INFO_HE_RU_ALLOC_26, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_52, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_106, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_242, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_484, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_996, |
| + NL80211_RATE_INFO_HE_RU_ALLOC_2x996, |
| +}; |
| + |
| /** |
| * enum nl80211_rate_info - bitrate information |
| * |
| @@ -2771,6 +3228,13 @@ struct nl80211_sta_flag_update { |
| * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is |
| * a legacy rate and will be reported as the actual bitrate, i.e. |
| * a quarter of the base (20 MHz) rate |
| + * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) |
| + * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) |
| + * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier |
| + * (u8, see &enum nl80211_he_gi) |
| + * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) |
| + * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then |
| + * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) |
| * @__NL80211_RATE_INFO_AFTER_LAST: internal use |
| */ |
| enum nl80211_rate_info { |
| @@ -2787,6 +3251,11 @@ enum nl80211_rate_info { |
| NL80211_RATE_INFO_160_MHZ_WIDTH, |
| NL80211_RATE_INFO_10_MHZ_WIDTH, |
| NL80211_RATE_INFO_5_MHZ_WIDTH, |
| + NL80211_RATE_INFO_HE_MCS, |
| + NL80211_RATE_INFO_HE_NSS, |
| + NL80211_RATE_INFO_HE_GI, |
| + NL80211_RATE_INFO_HE_DCM, |
| + NL80211_RATE_INFO_HE_RU_ALLOC, |
| |
| /* keep last */ |
| __NL80211_RATE_INFO_AFTER_LAST, |
| @@ -2885,6 +3354,22 @@ enum nl80211_sta_bss_param { |
| * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames |
| * received from the station (u64, usec) |
| * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment |
| + * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) |
| + * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) |
| + * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) |
| + * (u32, from this station) |
| + * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received |
| + * with an FCS error (u32, from this station). This count may not include |
| + * some packets with an FCS error due to TA corruption. Hence this counter |
| + * might not be fully accurate. |
| + * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a |
| + * mesh gate (u8, 0 or 1) |
| + * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames |
| + * sent to the station (u64, usec) |
| + * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) |
| + * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station |
| + * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) |
| + * of STA's association |
| * @__NL80211_STA_INFO_AFTER_LAST: internal |
| * @NL80211_STA_INFO_MAX: highest possible station info attribute |
| */ |
| @@ -2923,12 +3408,25 @@ enum nl80211_sta_info { |
| NL80211_STA_INFO_TID_STATS, |
| NL80211_STA_INFO_RX_DURATION, |
| NL80211_STA_INFO_PAD, |
| + NL80211_STA_INFO_ACK_SIGNAL, |
| + NL80211_STA_INFO_ACK_SIGNAL_AVG, |
| + NL80211_STA_INFO_RX_MPDUS, |
| + NL80211_STA_INFO_FCS_ERROR_COUNT, |
| + NL80211_STA_INFO_CONNECTED_TO_GATE, |
| + NL80211_STA_INFO_TX_DURATION, |
| + NL80211_STA_INFO_AIRTIME_WEIGHT, |
| + NL80211_STA_INFO_AIRTIME_LINK_METRIC, |
| + NL80211_STA_INFO_ASSOC_AT_BOOTTIME, |
| |
| /* keep last */ |
| __NL80211_STA_INFO_AFTER_LAST, |
| NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 |
| }; |
| |
| +/* we renamed this - stay compatible */ |
| +#define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG |
| + |
| + |
| /** |
| * enum nl80211_tid_stats - per TID statistics attributes |
| * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved |
| @@ -2940,6 +3438,7 @@ enum nl80211_sta_info { |
| * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted |
| * MSDUs (u64) |
| * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment |
| + * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) |
| * @NUM_NL80211_TID_STATS: number of attributes here |
| * @NL80211_TID_STATS_MAX: highest numbered attribute here |
| */ |
| @@ -2950,12 +3449,51 @@ enum nl80211_tid_stats { |
| NL80211_TID_STATS_TX_MSDU_RETRIES, |
| NL80211_TID_STATS_TX_MSDU_FAILED, |
| NL80211_TID_STATS_PAD, |
| + NL80211_TID_STATS_TXQ_STATS, |
| |
| /* keep last */ |
| NUM_NL80211_TID_STATS, |
| NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 |
| }; |
| |
| +/** |
| + * enum nl80211_txq_stats - per TXQ statistics attributes |
| + * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved |
| + * @NUM_NL80211_TXQ_STATS: number of attributes here |
| + * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged |
| + * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently |
| + * backlogged |
| + * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen |
| + * @NL80211_TXQ_STATS_DROPS: total number of packet drops |
| + * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks |
| + * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow |
| + * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow |
| + * (only for per-phy stats) |
| + * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions |
| + * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ |
| + * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ |
| + * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY |
| + * @NL80211_TXQ_STATS_MAX: highest numbered attribute here |
| + */ |
| +enum nl80211_txq_stats { |
| + __NL80211_TXQ_STATS_INVALID, |
| + NL80211_TXQ_STATS_BACKLOG_BYTES, |
| + NL80211_TXQ_STATS_BACKLOG_PACKETS, |
| + NL80211_TXQ_STATS_FLOWS, |
| + NL80211_TXQ_STATS_DROPS, |
| + NL80211_TXQ_STATS_ECN_MARKS, |
| + NL80211_TXQ_STATS_OVERLIMIT, |
| + NL80211_TXQ_STATS_OVERMEMORY, |
| + NL80211_TXQ_STATS_COLLISIONS, |
| + NL80211_TXQ_STATS_TX_BYTES, |
| + NL80211_TXQ_STATS_TX_PACKETS, |
| + NL80211_TXQ_STATS_MAX_FLOWS, |
| + |
| + /* keep last */ |
| + NUM_NL80211_TXQ_STATS, |
| + NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 |
| +}; |
| + |
| /** |
| * enum nl80211_mpath_flags - nl80211 mesh path flags |
| * |
| @@ -2988,8 +3526,10 @@ enum nl80211_mpath_flags { |
| * &enum nl80211_mpath_flags; |
| * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec |
| * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries |
| + * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination |
| + * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination |
| * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number |
| - * currently defind |
| + * currently defined |
| * @__NL80211_MPATH_INFO_AFTER_LAST: internal use |
| */ |
| enum nl80211_mpath_info { |
| @@ -3001,12 +3541,49 @@ enum nl80211_mpath_info { |
| NL80211_MPATH_INFO_FLAGS, |
| NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, |
| NL80211_MPATH_INFO_DISCOVERY_RETRIES, |
| + NL80211_MPATH_INFO_HOP_COUNT, |
| + NL80211_MPATH_INFO_PATH_CHANGE, |
| |
| /* keep last */ |
| __NL80211_MPATH_INFO_AFTER_LAST, |
| NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 |
| }; |
| |
| +/** |
| + * enum nl80211_band_iftype_attr - Interface type data attributes |
| + * |
| + * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved |
| + * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute |
| + * for each interface type that supports the band data |
| + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE |
| + * capabilities IE |
| + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE |
| + * capabilities IE |
| + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE |
| + * capabilities IE |
| + * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as |
| + * defined in HE capabilities IE |
| + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently |
| + * defined |
| + * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), |
| + * given for all 6 GHz band channels |
| + * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use |
| + */ |
| +enum nl80211_band_iftype_attr { |
| + __NL80211_BAND_IFTYPE_ATTR_INVALID, |
| + |
| + NL80211_BAND_IFTYPE_ATTR_IFTYPES, |
| + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, |
| + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, |
| + NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, |
| + NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, |
| + NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, |
| + |
| + /* keep last */ |
| + __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, |
| + NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 |
| +}; |
| + |
| /** |
| * enum nl80211_band_attr - band attributes |
| * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved |
| @@ -3022,6 +3599,14 @@ enum nl80211_mpath_info { |
| * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as |
| * defined in 802.11ac |
| * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE |
| + * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using |
| + * attributes from &enum nl80211_band_iftype_attr |
| + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz |
| + * channel(s) that are allowed to be used for EDMG transmissions. |
| + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. |
| + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes |
| + * the allowed channel bandwidth configurations. |
| + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. |
| * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined |
| * @__NL80211_BAND_ATTR_AFTER_LAST: internal use |
| */ |
| @@ -3037,6 +3622,10 @@ enum nl80211_band_attr { |
| |
| NL80211_BAND_ATTR_VHT_MCS_SET, |
| NL80211_BAND_ATTR_VHT_CAPA, |
| + NL80211_BAND_ATTR_IFTYPE_DATA, |
| + |
| + NL80211_BAND_ATTR_EDMG_CHANNELS, |
| + NL80211_BAND_ATTR_EDMG_BW_CONFIG, |
| |
| /* keep last */ |
| __NL80211_BAND_ATTR_AFTER_LAST, |
| @@ -3045,6 +3634,29 @@ enum nl80211_band_attr { |
| |
| #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
| |
| +/** |
| + * enum nl80211_wmm_rule - regulatory wmm rule |
| + * |
| + * @__NL80211_WMMR_INVALID: attribute number 0 is reserved |
| + * @NL80211_WMMR_CW_MIN: Minimum contention window slot. |
| + * @NL80211_WMMR_CW_MAX: Maximum contention window slot. |
| + * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. |
| + * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. |
| + * @nl80211_WMMR_MAX: highest possible wmm rule. |
| + * @__NL80211_WMMR_LAST: Internal use. |
| + */ |
| +enum nl80211_wmm_rule { |
| + __NL80211_WMMR_INVALID, |
| + NL80211_WMMR_CW_MIN, |
| + NL80211_WMMR_CW_MAX, |
| + NL80211_WMMR_AIFSN, |
| + NL80211_WMMR_TXOP, |
| + |
| + /* keep last */ |
| + __NL80211_WMMR_LAST, |
| + NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 |
| +}; |
| + |
| /** |
| * enum nl80211_frequency_attr - frequency attributes |
| * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved |
| @@ -3094,6 +3706,12 @@ enum nl80211_band_attr { |
| * on this channel in current regulatory domain. |
| * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed |
| * on this channel in current regulatory domain. |
| + * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. |
| + * This is a nested attribute that contains the wmm limitation per AC. |
| + * (see &enum nl80211_wmm_rule) |
| + * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel |
| + * in current regulatory domain. |
| + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz |
| * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number |
| * currently defined |
| * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use |
| @@ -3122,6 +3740,9 @@ enum nl80211_frequency_attr { |
| NL80211_FREQUENCY_ATTR_IR_CONCURRENT, |
| NL80211_FREQUENCY_ATTR_NO_20MHZ, |
| NL80211_FREQUENCY_ATTR_NO_10MHZ, |
| + NL80211_FREQUENCY_ATTR_WMM, |
| + NL80211_FREQUENCY_ATTR_NO_HE, |
| + NL80211_FREQUENCY_ATTR_OFFSET, |
| |
| /* keep last */ |
| __NL80211_FREQUENCY_ATTR_AFTER_LAST, |
| @@ -3267,6 +3888,14 @@ enum nl80211_reg_rule_attr { |
| * value as specified by &struct nl80211_bss_select_rssi_adjust. |
| * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching |
| * (this cannot be used together with SSID). |
| + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the |
| + * band specific minimum rssi thresholds for the bands defined in |
| + * enum nl80211_band. The minimum rssi threshold value(s32) specific to a |
| + * band shall be encapsulated in attribute with type value equals to one |
| + * of the NL80211_BAND_* defined in enum nl80211_band. For example, the |
| + * minimum rssi threshold value for 2.4GHZ band shall be encapsulated |
| + * within an attribute of type NL80211_BAND_2GHZ. And one or more of such |
| + * attributes will be nested within this attribute. |
| * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter |
| * attribute number currently defined |
| * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use |
| @@ -3279,6 +3908,7 @@ enum nl80211_sched_scan_match_attr { |
| NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, |
| NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, |
| NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, |
| + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, |
| |
| /* keep last */ |
| __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, |
| @@ -3305,11 +3935,12 @@ enum nl80211_sched_scan_match_attr { |
| * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated |
| * base on contiguous rules and wider channels will be allowed to cross |
| * multiple contiguous/overlapping frequency ranges. |
| - * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT |
| + * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT |
| * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation |
| * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation |
| * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed |
| * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed |
| + * @NL80211_RRF_NO_HE: HE operation not allowed |
| */ |
| enum nl80211_reg_rule_flags { |
| NL80211_RRF_NO_OFDM = 1<<0, |
| @@ -3327,6 +3958,7 @@ enum nl80211_reg_rule_flags { |
| NL80211_RRF_NO_HT40PLUS = 1<<14, |
| NL80211_RRF_NO_80MHZ = 1<<15, |
| NL80211_RRF_NO_160MHZ = 1<<16, |
| + NL80211_RRF_NO_HE = 1<<17, |
| }; |
| |
| #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR |
| @@ -3400,6 +4032,8 @@ enum nl80211_user_reg_hint_type { |
| * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan |
| * (on this channel or globally) |
| * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment |
| + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent |
| + * receiving frames destined to the local BSS |
| * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number |
| * currently defined |
| * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use |
| @@ -3416,6 +4050,7 @@ enum nl80211_survey_info { |
| NL80211_SURVEY_INFO_TIME_TX, |
| NL80211_SURVEY_INFO_TIME_SCAN, |
| NL80211_SURVEY_INFO_PAD, |
| + NL80211_SURVEY_INFO_TIME_BSS_RX, |
| |
| /* keep last */ |
| __NL80211_SURVEY_INFO_AFTER_LAST, |
| @@ -3596,6 +4231,11 @@ enum nl80211_mesh_power_mode { |
| * remove it from the STA's list of peers. You may set this to 0 to disable |
| * the removal of the STA. Default is 30 minutes. |
| * |
| + * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA |
| + * will advertise that it is connected to a gate in the mesh formation |
| + * field. If left unset then the mesh formation field will only |
| + * advertise such if there is an active root mesh path. |
| + * |
| * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use |
| */ |
| enum nl80211_meshconf_params { |
| @@ -3628,6 +4268,7 @@ enum nl80211_meshconf_params { |
| NL80211_MESHCONF_POWER_MODE, |
| NL80211_MESHCONF_AWAKE_WINDOW, |
| NL80211_MESHCONF_PLINK_TIMEOUT, |
| + NL80211_MESHCONF_CONNECTED_TO_GATE, |
| |
| /* keep last */ |
| __NL80211_MESHCONF_ATTR_AFTER_LAST, |
| @@ -3757,6 +4398,27 @@ enum nl80211_channel_type { |
| NL80211_CHAN_HT40PLUS |
| }; |
| |
| +/** |
| + * enum nl80211_key_mode - Key mode |
| + * |
| + * @NL80211_KEY_RX_TX: (Default) |
| + * Key can be used for Rx and Tx immediately |
| + * |
| + * The following modes can only be selected for unicast keys and when the |
| + * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: |
| + * |
| + * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: |
| + * Unicast key can only be used for Rx, Tx not allowed, yet |
| + * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: |
| + * The unicast key identified by idx and mac is cleared for Tx and becomes |
| + * the preferred Tx key for the station. |
| + */ |
| +enum nl80211_key_mode { |
| + NL80211_KEY_RX_TX, |
| + NL80211_KEY_NO_TX, |
| + NL80211_KEY_SET_TX |
| +}; |
| + |
| /** |
| * enum nl80211_chan_width - channel width definitions |
| * |
| @@ -3848,6 +4510,10 @@ enum nl80211_bss_scan_width { |
| * @NL80211_BSS_PARENT_BSSID. (u64). |
| * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF |
| * is set. |
| + * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. |
| + * Contains a nested array of signal strength attributes (u8, dBm), |
| + * using the nesting index as the antenna number. |
| + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz |
| * @__NL80211_BSS_AFTER_LAST: internal |
| * @NL80211_BSS_MAX: highest BSS attribute |
| */ |
| @@ -3871,6 +4537,8 @@ enum nl80211_bss { |
| NL80211_BSS_PAD, |
| NL80211_BSS_PARENT_TSF, |
| NL80211_BSS_PARENT_BSSID, |
| + NL80211_BSS_CHAIN_SIGNAL, |
| + NL80211_BSS_FREQUENCY_OFFSET, |
| |
| /* keep last */ |
| __NL80211_BSS_AFTER_LAST, |
| @@ -3947,15 +4615,18 @@ enum nl80211_key_type { |
| * enum nl80211_mfp - Management frame protection state |
| * @NL80211_MFP_NO: Management frame protection not used |
| * @NL80211_MFP_REQUIRED: Management frame protection required |
| + * @NL80211_MFP_OPTIONAL: Management frame protection is optional |
| */ |
| enum nl80211_mfp { |
| NL80211_MFP_NO, |
| NL80211_MFP_REQUIRED, |
| + NL80211_MFP_OPTIONAL, |
| }; |
| |
| enum nl80211_wpa_versions { |
| NL80211_WPA_VERSION_1 = 1 << 0, |
| NL80211_WPA_VERSION_2 = 1 << 1, |
| + NL80211_WPA_VERSION_3 = 1 << 2, |
| }; |
| |
| /** |
| @@ -3994,6 +4665,10 @@ enum nl80211_key_default_types { |
| * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags |
| * attributes, specifying what a key should be set as default as. |
| * See &enum nl80211_key_default_types. |
| + * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. |
| + * Defaults to @NL80211_KEY_RX_TX. |
| + * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key |
| + * |
| * @__NL80211_KEY_AFTER_LAST: internal |
| * @NL80211_KEY_MAX: highest key attribute |
| */ |
| @@ -4007,6 +4682,8 @@ enum nl80211_key_attributes { |
| NL80211_KEY_DEFAULT_MGMT, |
| NL80211_KEY_TYPE, |
| NL80211_KEY_DEFAULT_TYPES, |
| + NL80211_KEY_MODE, |
| + NL80211_KEY_DEFAULT_BEACON, |
| |
| /* keep last */ |
| __NL80211_KEY_AFTER_LAST, |
| @@ -4061,7 +4738,8 @@ enum nl80211_txrate_gi { |
| * enum nl80211_band - Frequency band |
| * @NL80211_BAND_2GHZ: 2.4 GHz ISM band |
| * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) |
| - * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) |
| + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) |
| + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) |
| * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace |
| * since newer kernel versions may support more bands |
| */ |
| @@ -4069,6 +4747,7 @@ enum nl80211_band { |
| NL80211_BAND_2GHZ, |
| NL80211_BAND_5GHZ, |
| NL80211_BAND_60GHZ, |
| + NL80211_BAND_6GHZ, |
| |
| NUM_NL80211_BANDS, |
| }; |
| @@ -4160,6 +4839,92 @@ enum nl80211_tx_power_setting { |
| NL80211_TX_POWER_FIXED, |
| }; |
| |
| +/** |
| + * enum nl80211_tid_config - TID config state |
| + * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID |
| + * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID |
| + */ |
| +enum nl80211_tid_config { |
| + NL80211_TID_CONFIG_ENABLE, |
| + NL80211_TID_CONFIG_DISABLE, |
| +}; |
| + |
| +/* enum nl80211_tx_rate_setting - TX rate configuration type |
| + * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate |
| + * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter |
| + * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter |
| + */ |
| +enum nl80211_tx_rate_setting { |
| + NL80211_TX_RATE_AUTOMATIC, |
| + NL80211_TX_RATE_LIMITED, |
| + NL80211_TX_RATE_FIXED, |
| +}; |
| + |
| +/* enum nl80211_tid_config_attr - TID specific configuration. |
| + * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values |
| + * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported |
| + * for per-vif configuration; doesn't list the ones that are generic |
| + * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). |
| + * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but |
| + * per peer instead. |
| + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates |
| + * that the new configuration overrides all previous peer |
| + * configurations, otherwise previous peer specific configurations |
| + * should be left untouched. |
| + * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) |
| + * Its type is u16. |
| + * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. |
| + * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. |
| + * Its type is u8. |
| + * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame |
| + * transmission, user-space sets this configuration in |
| + * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and |
| + * the max value is advertised by the driver in this attribute on |
| + * output in wiphy capabilities. |
| + * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame |
| + * transmission, user-space sets this configuration in |
| + * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and |
| + * the max value is advertised by the driver in this attribute on |
| + * output in wiphy capabilities. |
| + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation |
| + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. |
| + * Its type is u8, using the values from &nl80211_tid_config. |
| + * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs |
| + * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using |
| + * the values from &nl80211_tid_config. |
| + * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation |
| + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. |
| + * Its type is u8, using the values from &nl80211_tid_config. |
| + * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful |
| + * to notfiy the driver that what type of txrate should be used |
| + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using |
| + * the values form &nl80211_tx_rate_setting. |
| + * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied |
| + * with the parameters passed through %NL80211_ATTR_TX_RATES. |
| + * configuration is applied to the data frame for the tid to that connected |
| + * station. |
| + */ |
| +enum nl80211_tid_config_attr { |
| + __NL80211_TID_CONFIG_ATTR_INVALID, |
| + NL80211_TID_CONFIG_ATTR_PAD, |
| + NL80211_TID_CONFIG_ATTR_VIF_SUPP, |
| + NL80211_TID_CONFIG_ATTR_PEER_SUPP, |
| + NL80211_TID_CONFIG_ATTR_OVERRIDE, |
| + NL80211_TID_CONFIG_ATTR_TIDS, |
| + NL80211_TID_CONFIG_ATTR_NOACK, |
| + NL80211_TID_CONFIG_ATTR_RETRY_SHORT, |
| + NL80211_TID_CONFIG_ATTR_RETRY_LONG, |
| + NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, |
| + NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, |
| + NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, |
| + NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, |
| + NL80211_TID_CONFIG_ATTR_TX_RATE, |
| + |
| + /* keep last */ |
| + __NL80211_TID_CONFIG_ATTR_AFTER_LAST, |
| + NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 |
| +}; |
| + |
| /** |
| * enum nl80211_packet_pattern_attr - packet pattern attribute |
| * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute |
| @@ -4554,7 +5319,7 @@ enum nl80211_iface_limit_attrs { |
| * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 |
| * => allows a STA plus three P2P interfaces |
| * |
| - * The list of these four possiblities could completely be contained |
| + * The list of these four possibilities could completely be contained |
| * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate |
| * that any of these groups must match. |
| * |
| @@ -4584,7 +5349,7 @@ enum nl80211_if_combination_attrs { |
| * enum nl80211_plink_state - state of a mesh peer link finite state machine |
| * |
| * @NL80211_PLINK_LISTEN: initial state, considered the implicit |
| - * state of non existant mesh peer links |
| + * state of non existent mesh peer links |
| * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to |
| * this mesh peer |
| * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received |
| @@ -4631,6 +5396,8 @@ enum plink_actions { |
| |
| #define NL80211_KCK_LEN 16 |
| #define NL80211_KEK_LEN 16 |
| +#define NL80211_KCK_EXT_LEN 24 |
| +#define NL80211_KEK_EXT_LEN 32 |
| #define NL80211_REPLAY_CTR_LEN 8 |
| |
| /** |
| @@ -4639,6 +5406,7 @@ enum plink_actions { |
| * @NL80211_REKEY_DATA_KEK: key encryption key (binary) |
| * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) |
| * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) |
| + * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) |
| * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) |
| * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) |
| */ |
| @@ -4647,6 +5415,7 @@ enum nl80211_rekey_data { |
| NL80211_REKEY_DATA_KEK, |
| NL80211_REKEY_DATA_KCK, |
| NL80211_REKEY_DATA_REPLAY_CTR, |
| + NL80211_REKEY_DATA_AKM, |
| |
| /* keep last */ |
| NUM_NL80211_REKEY_DATA, |
| @@ -4860,7 +5629,7 @@ enum nl80211_feature_flags { |
| NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, |
| NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, |
| NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, |
| - NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, |
| + NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, |
| }; |
| |
| /** |
| @@ -4914,6 +5683,95 @@ enum nl80211_feature_flags { |
| * handshake with 802.1X in station mode (will pass EAP frames to the host |
| * and accept the set_pmk/del_pmk commands), doing it in the host might not |
| * be supported. |
| + * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding |
| + * the max channel attribute in the FILS request params IE with the |
| + * actual dwell time. |
| + * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe |
| + * response |
| + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending |
| + * the first probe request in each channel at rate of at least 5.5Mbps. |
| + * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports |
| + * probe request tx deferral and suppression |
| + * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL |
| + * value in %NL80211_ATTR_USE_MFP. |
| + * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. |
| + * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. |
| + * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. |
| + * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. |
| + * Device or driver will do all DFS-related actions by itself, |
| + * informing user-space about CAC progress, radar detection event, |
| + * channel change triggered by radar detection event. |
| + * No need to start CAC from user-space, no need to react to |
| + * "radar detected" event. |
| + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and |
| + * receiving control port frames over nl80211 instead of the netdevice. |
| + * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports |
| + * (average) ACK signal strength reporting. |
| + * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate |
| + * TXQs. |
| + * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the |
| + * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. |
| + * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data |
| + * except for supported rates from the probe request content if requested |
| + * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. |
| + * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine |
| + * timing measurement responder role. |
| + * |
| + * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are |
| + * able to rekey an in-use key correctly. Userspace must not rekey PTK keys |
| + * if this flag is not set. Ignoring this can leak clear text packets and/or |
| + * freeze the connection. |
| + * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for |
| + * Individually Addressed Frames" from IEEE802.11-2016. |
| + * |
| + * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime |
| + * fairness for transmitted packets and has enabled airtime fairness |
| + * scheduling. |
| + * |
| + * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching |
| + * (set/del PMKSA operations) in AP mode. |
| + * |
| + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports |
| + * filtering of sched scan results using band specific RSSI thresholds. |
| + * |
| + * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power |
| + * to a station. |
| + * |
| + * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in |
| + * station mode (SAE password is passed as part of the connect command). |
| + * |
| + * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev |
| + * with VLAN tagged frames and separate VLAN-specific netdevs added using |
| + * vconfig similarly to the Ethernet case. |
| + * |
| + * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) |
| + * feature, which prevents bufferbloat by using the expected transmission |
| + * time to limit the amount of data buffered in the hardware. |
| + * |
| + * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection |
| + * and can receive key configuration for BIGTK using key indexes 6 and 7. |
| + * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon |
| + * protection as a client only and cannot transmit protected beacons. |
| + * |
| + * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the |
| + * forwarding of preauth frames over the control port. They are then |
| + * handled as ordinary data frames. |
| + * |
| + * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames |
| + * |
| + * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations |
| + * in IBSS mode, essentially by dropping their state. |
| + * |
| + * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations |
| + * are possible for multicast frames and those will be reported properly. |
| + * |
| + * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and |
| + * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to |
| + * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be |
| + * included in the scan request. |
| + * |
| + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver |
| + * can report tx status for control port over nl80211 tx operations. |
| * |
| * @NUM_NL80211_EXT_FEATURES: number of extended features. |
| * @MAX_NL80211_EXT_FEATURES: highest extended feature index. |
| @@ -4936,6 +5794,40 @@ enum nl80211_ext_feature_index { |
| NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, |
| NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, |
| NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, |
| + NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, |
| + NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, |
| + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, |
| + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, |
| + NL80211_EXT_FEATURE_MFP_OPTIONAL, |
| + NL80211_EXT_FEATURE_LOW_SPAN_SCAN, |
| + NL80211_EXT_FEATURE_LOW_POWER_SCAN, |
| + NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, |
| + NL80211_EXT_FEATURE_DFS_OFFLOAD, |
| + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, |
| + NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, |
| + /* we renamed this - stay compatible */ |
| + NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, |
| + NL80211_EXT_FEATURE_TXQS, |
| + NL80211_EXT_FEATURE_SCAN_RANDOM_SN, |
| + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, |
| + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, |
| + NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, |
| + NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, |
| + NL80211_EXT_FEATURE_AP_PMKSA_CACHING, |
| + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, |
| + NL80211_EXT_FEATURE_EXT_KEY_ID, |
| + NL80211_EXT_FEATURE_STA_TX_PWR, |
| + NL80211_EXT_FEATURE_SAE_OFFLOAD, |
| + NL80211_EXT_FEATURE_VLAN_OFFLOAD, |
| + NL80211_EXT_FEATURE_AQL, |
| + NL80211_EXT_FEATURE_BEACON_PROTECTION, |
| + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, |
| + NL80211_EXT_FEATURE_PROTECTED_TWT, |
| + NL80211_EXT_FEATURE_DEL_IBSS_STA, |
| + NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, |
| + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, |
| + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, |
| + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, |
| |
| /* add new features before the definition below */ |
| NUM_NL80211_EXT_FEATURES, |
| @@ -4996,6 +5888,10 @@ enum nl80211_timeout_reason { |
| * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN |
| * requests. |
| * |
| + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and |
| + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only |
| + * one of them can be used in the request. |
| + * |
| * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority |
| * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning |
| * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured |
| @@ -5012,12 +5908,56 @@ enum nl80211_timeout_reason { |
| * locally administered 1, multicast 0) is assumed. |
| * This flag must not be requested when the feature isn't supported, check |
| * the nl80211 feature flags for the device. |
| + * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS |
| + * request parameters IE in the probe request |
| + * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses |
| + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at |
| + * rate of at least 5.5M. In case non OCE AP is discovered in the channel, |
| + * only the first probe req in the channel will be sent in high rate. |
| + * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request |
| + * tx deferral (dot11FILSProbeDelay shall be set to 15ms) |
| + * and suppression (if it has received a broadcast Probe Response frame, |
| + * Beacon frame or FILS Discovery frame from an AP that the STA considers |
| + * a suitable candidate for (re-)association - suitable in terms of |
| + * SSID and/or RSSI. |
| + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to |
| + * accomplish the scan. Thus, this flag intends the driver to perform the |
| + * scan request with lesser span/duration. It is specific to the driver |
| + * implementations on how this is accomplished. Scan accuracy may get |
| + * impacted with this flag. |
| + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume |
| + * optimal possible power. Drivers can resort to their specific means to |
| + * optimize the power. Scan accuracy may get impacted with this flag. |
| + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan |
| + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum |
| + * possible scan results. This flag hints the driver to use the best |
| + * possible scan configuration to improve the accuracy in scanning. |
| + * Latency and power use may get impacted with this flag. |
| + * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe |
| + * request frames from this scan to avoid correlation/tracking being |
| + * possible. |
| + * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to |
| + * only have supported rates and no additional capabilities (unless |
| + * added by userspace explicitly.) |
| + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with |
| + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means |
| + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. |
| */ |
| enum nl80211_scan_flags { |
| - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, |
| - NL80211_SCAN_FLAG_FLUSH = 1<<1, |
| - NL80211_SCAN_FLAG_AP = 1<<2, |
| - NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, |
| + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, |
| + NL80211_SCAN_FLAG_FLUSH = 1<<1, |
| + NL80211_SCAN_FLAG_AP = 1<<2, |
| + NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, |
| + NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, |
| + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, |
| + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, |
| + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, |
| + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, |
| + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, |
| + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, |
| + NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, |
| + NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, |
| + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, |
| }; |
| |
| /** |
| @@ -5075,6 +6015,8 @@ enum nl80211_smps_mode { |
| * non-operating channel is expired and no longer valid. New CAC must |
| * be done on this channel before starting the operation. This is not |
| * applicable for ETSI dfs domain where pre-CAC is valid for ever. |
| + * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, |
| + * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. |
| */ |
| enum nl80211_radar_event { |
| NL80211_RADAR_DETECTED, |
| @@ -5082,6 +6024,7 @@ enum nl80211_radar_event { |
| NL80211_RADAR_CAC_ABORTED, |
| NL80211_RADAR_NOP_FINISHED, |
| NL80211_RADAR_PRE_CAC_EXPIRED, |
| + NL80211_RADAR_CAC_STARTED, |
| }; |
| |
| /** |
| @@ -5140,9 +6083,14 @@ enum nl80211_crit_proto_id { |
| * Used by cfg80211_rx_mgmt() |
| * |
| * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. |
| + * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload |
| + * the authentication. Exclusively defined for host drivers that |
| + * advertises the SME functionality but would like the userspace |
| + * to handle certain authentication algorithms (e.g. SAE). |
| */ |
| enum nl80211_rxmgmt_flags { |
| NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, |
| + NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, |
| }; |
| |
| /* |
| @@ -5373,11 +6321,11 @@ enum nl80211_nan_func_attributes { |
| * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. |
| * This is a flag. |
| * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if |
| - * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. |
| + * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. |
| * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if |
| - * &NL80211_NAN_SRF_BF is present. This is a u8. |
| + * %NL80211_NAN_SRF_BF is present. This is a u8. |
| * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if |
| - * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested |
| + * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested |
| * attribute. Each nested attribute is a MAC address. |
| * @NUM_NL80211_NAN_SRF_ATTR: internal |
| * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute |
| @@ -5417,4 +6365,561 @@ enum nl80211_nan_match_attributes { |
| NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 |
| }; |
| |
| +/** |
| + * nl80211_external_auth_action - Action to perform with external |
| + * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. |
| + * @NL80211_EXTERNAL_AUTH_START: Start the authentication. |
| + * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. |
| + */ |
| +enum nl80211_external_auth_action { |
| + NL80211_EXTERNAL_AUTH_START, |
| + NL80211_EXTERNAL_AUTH_ABORT, |
| +}; |
| + |
| +/** |
| + * enum nl80211_ftm_responder_attributes - fine timing measurement |
| + * responder attributes |
| + * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid |
| + * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled |
| + * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element |
| + * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), |
| + * i.e. starting with the measurement token |
| + * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element |
| + * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), |
| + * i.e. starting with the measurement token |
| + * @__NL80211_FTM_RESP_ATTR_LAST: Internal |
| + * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. |
| + */ |
| +enum nl80211_ftm_responder_attributes { |
| + __NL80211_FTM_RESP_ATTR_INVALID, |
| + |
| + NL80211_FTM_RESP_ATTR_ENABLED, |
| + NL80211_FTM_RESP_ATTR_LCI, |
| + NL80211_FTM_RESP_ATTR_CIVICLOC, |
| + |
| + /* keep last */ |
| + __NL80211_FTM_RESP_ATTR_LAST, |
| + NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, |
| +}; |
| + |
| +/* |
| + * enum nl80211_ftm_responder_stats - FTM responder statistics |
| + * |
| + * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS |
| + * when getting FTM responder statistics. |
| + * |
| + * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved |
| + * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames |
| + * were ssfully answered (u32) |
| + * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the |
| + * frames were successfully answered (u32) |
| + * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) |
| + * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) |
| + * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) |
| + * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an |
| + * indication of how much time the responder was busy (u64, msec) |
| + * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - |
| + * triggers from initiators that didn't finish successfully the negotiation |
| + * phase with the responder (u32) |
| + * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests |
| + * - initiator asks for a new scheduling although it already has scheduled |
| + * FTM slot (u32) |
| + * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of |
| + * scheduled window (u32) |
| + * @NL80211_FTM_STATS_PAD: used for padding, ignore |
| + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal |
| + * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute |
| + */ |
| +enum nl80211_ftm_responder_stats { |
| + __NL80211_FTM_STATS_INVALID, |
| + NL80211_FTM_STATS_SUCCESS_NUM, |
| + NL80211_FTM_STATS_PARTIAL_NUM, |
| + NL80211_FTM_STATS_FAILED_NUM, |
| + NL80211_FTM_STATS_ASAP_NUM, |
| + NL80211_FTM_STATS_NON_ASAP_NUM, |
| + NL80211_FTM_STATS_TOTAL_DURATION_MSEC, |
| + NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, |
| + NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, |
| + NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, |
| + NL80211_FTM_STATS_PAD, |
| + |
| + /* keep last */ |
| + __NL80211_FTM_STATS_AFTER_LAST, |
| + NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_preamble - frame preamble types |
| + * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble |
| + * @NL80211_PREAMBLE_HT: HT preamble |
| + * @NL80211_PREAMBLE_VHT: VHT preamble |
| + * @NL80211_PREAMBLE_DMG: DMG preamble |
| + * @NL80211_PREAMBLE_HE: HE preamble |
| + */ |
| +enum nl80211_preamble { |
| + NL80211_PREAMBLE_LEGACY, |
| + NL80211_PREAMBLE_HT, |
| + NL80211_PREAMBLE_VHT, |
| + NL80211_PREAMBLE_DMG, |
| + NL80211_PREAMBLE_HE, |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_type - peer measurement types |
| + * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use |
| + * these numbers also for attributes |
| + * |
| + * @NL80211_PMSR_TYPE_FTM: flight time measurement |
| + * |
| + * @NUM_NL80211_PMSR_TYPES: internal |
| + * @NL80211_PMSR_TYPE_MAX: highest type number |
| + */ |
| +enum nl80211_peer_measurement_type { |
| + NL80211_PMSR_TYPE_INVALID, |
| + |
| + NL80211_PMSR_TYPE_FTM, |
| + |
| + NUM_NL80211_PMSR_TYPES, |
| + NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_status - peer measurement status |
| + * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully |
| + * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused |
| + * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out |
| + * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent |
| + * reason may be available in the response data |
| + */ |
| +enum nl80211_peer_measurement_status { |
| + NL80211_PMSR_STATUS_SUCCESS, |
| + NL80211_PMSR_STATUS_REFUSED, |
| + NL80211_PMSR_STATUS_TIMEOUT, |
| + NL80211_PMSR_STATUS_FAILURE, |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_req - peer measurement request attributes |
| + * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement |
| + * type-specific request data inside. The attributes used are from the |
| + * enums named nl80211_peer_measurement_<type>_req. |
| + * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported |
| + * (flag attribute) |
| + * |
| + * @NUM_NL80211_PMSR_REQ_ATTRS: internal |
| + * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_req { |
| + __NL80211_PMSR_REQ_ATTR_INVALID, |
| + |
| + NL80211_PMSR_REQ_ATTR_DATA, |
| + NL80211_PMSR_REQ_ATTR_GET_AP_TSF, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_REQ_ATTRS, |
| + NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_resp - peer measurement response attributes |
| + * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement |
| + * type-specific results inside. The attributes used are from the enums |
| + * named nl80211_peer_measurement_<type>_resp. |
| + * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status |
| + * (using values from &enum nl80211_peer_measurement_status.) |
| + * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the |
| + * result was measured; this value is not expected to be accurate to |
| + * more than 20ms. (u64, nanoseconds) |
| + * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface |
| + * doing the measurement is connected to when the result was measured. |
| + * This shall be accurately reported if supported and requested |
| + * (u64, usec) |
| + * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially |
| + * (*e.g. with FTM per-burst data) this flag will be cleared on all but |
| + * the last result; if all results are combined it's set on the single |
| + * result. |
| + * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore |
| + * |
| + * @NUM_NL80211_PMSR_RESP_ATTRS: internal |
| + * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_resp { |
| + __NL80211_PMSR_RESP_ATTR_INVALID, |
| + |
| + NL80211_PMSR_RESP_ATTR_DATA, |
| + NL80211_PMSR_RESP_ATTR_STATUS, |
| + NL80211_PMSR_RESP_ATTR_HOST_TIME, |
| + NL80211_PMSR_RESP_ATTR_AP_TSF, |
| + NL80211_PMSR_RESP_ATTR_FINAL, |
| + NL80211_PMSR_RESP_ATTR_PAD, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_RESP_ATTRS, |
| + NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement |
| + * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address |
| + * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level |
| + * attributes like %NL80211_ATTR_WIPHY_FREQ etc. |
| + * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by |
| + * measurement type, with attributes from the |
| + * &enum nl80211_peer_measurement_req inside. |
| + * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by |
| + * measurement type, with attributes from the |
| + * &enum nl80211_peer_measurement_resp inside. |
| + * |
| + * @NUM_NL80211_PMSR_PEER_ATTRS: internal |
| + * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_peer_attrs { |
| + __NL80211_PMSR_PEER_ATTR_INVALID, |
| + |
| + NL80211_PMSR_PEER_ATTR_ADDR, |
| + NL80211_PMSR_PEER_ATTR_CHAN, |
| + NL80211_PMSR_PEER_ATTR_REQ, |
| + NL80211_PMSR_PEER_ATTR_RESP, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_PEER_ATTRS, |
| + NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_attrs - peer measurement attributes |
| + * @__NL80211_PMSR_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability |
| + * advertisement only, indicates the maximum number of peers |
| + * measurements can be done with in a single request |
| + * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability |
| + * indicating that the connected AP's TSF can be reported in |
| + * measurement results |
| + * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability |
| + * indicating that MAC address randomization is supported. |
| + * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, |
| + * this contains a nesting indexed by measurement type, and |
| + * type-specific capabilities inside, which are from the enums |
| + * named nl80211_peer_measurement_<type>_capa. |
| + * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is |
| + * meaningless, just a list of peers to measure with, with the |
| + * sub-attributes taken from |
| + * &enum nl80211_peer_measurement_peer_attrs. |
| + * |
| + * @NUM_NL80211_PMSR_ATTR: internal |
| + * @NL80211_PMSR_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_attrs { |
| + __NL80211_PMSR_ATTR_INVALID, |
| + |
| + NL80211_PMSR_ATTR_MAX_PEERS, |
| + NL80211_PMSR_ATTR_REPORT_AP_TSF, |
| + NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, |
| + NL80211_PMSR_ATTR_TYPE_CAPA, |
| + NL80211_PMSR_ATTR_PEERS, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_ATTR, |
| + NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_ftm_capa - FTM capabilities |
| + * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode |
| + * is supported |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP |
| + * mode is supported |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI |
| + * data can be requested during the measurement |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic |
| + * location data can be requested during the measurement |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits |
| + * from &enum nl80211_preamble. |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from |
| + * &enum nl80211_chan_width indicating the supported channel |
| + * bandwidths for FTM. Note that a higher channel bandwidth may be |
| + * configured to allow for other measurements types with different |
| + * bandwidth requirement in the same measurement. |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating |
| + * the maximum bursts exponent that can be used (if not present anything |
| + * is valid) |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating |
| + * the maximum FTMs per burst (if not present anything is valid) |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if |
| + * trigger based ranging measurement is supported |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating |
| + * if non trigger based ranging measurement is supported |
| + * |
| + * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal |
| + * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_ftm_capa { |
| + __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, |
| + |
| + NL80211_PMSR_FTM_CAPA_ATTR_ASAP, |
| + NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, |
| + NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, |
| + NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, |
| + NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, |
| + NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, |
| + NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, |
| + NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, |
| + NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, |
| + NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_FTM_CAPA_ATTR, |
| + NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_ftm_req - FTM request attributes |
| + * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see |
| + * &enum nl80211_preamble), optional for DMG (u32) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in |
| + * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" |
| + * (u8, 0-15, optional with default 15 i.e. "no preference") |
| + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units |
| + * of 100ms (u16, optional with default 0) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 |
| + * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with |
| + * default 15 i.e. "no preference") |
| + * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames |
| + * requested per burst |
| + * (u8, 0-31, optional with default 0 i.e. "no preference") |
| + * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries |
| + * (u8, default 3) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data |
| + * (flag) |
| + * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging |
| + * measurement (flag). |
| + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are |
| + * mutually exclusive. |
| + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor |
| + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based |
| + * ranging will be used. |
| + * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based |
| + * ranging measurement (flag) |
| + * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are |
| + * mutually exclusive. |
| + * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor |
| + * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based |
| + * ranging will be used. |
| + * |
| + * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal |
| + * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_ftm_req { |
| + __NL80211_PMSR_FTM_REQ_ATTR_INVALID, |
| + |
| + NL80211_PMSR_FTM_REQ_ATTR_ASAP, |
| + NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, |
| + NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, |
| + NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, |
| + NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, |
| + NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, |
| + NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, |
| + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, |
| + NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, |
| + NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, |
| + NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_FTM_REQ_ATTR, |
| + NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons |
| + * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used |
| + * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder |
| + * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement |
| + * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is |
| + * on a different channel, so can't measure (if we didn't know, we'd |
| + * try and get no response) |
| + * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM |
| + * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps |
| + * received |
| + * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry |
| + * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) |
| + * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed |
| + * by the peer and are no longer supported |
| + */ |
| +enum nl80211_peer_measurement_ftm_failure_reasons { |
| + NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, |
| + NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, |
| + NL80211_PMSR_FTM_FAILURE_REJECTED, |
| + NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, |
| + NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, |
| + NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, |
| + NL80211_PMSR_FTM_FAILURE_PEER_BUSY, |
| + NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, |
| +}; |
| + |
| +/** |
| + * enum nl80211_peer_measurement_ftm_resp - FTM response attributes |
| + * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid |
| + * |
| + * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason |
| + * (u32, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported |
| + * as separate results then it will be the burst index 0...(N-1) and |
| + * the top level will indicate partial results (u32) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames |
| + * transmitted (u32, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames |
| + * that were acknowleged (u32, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the |
| + * busy peer (u32, seconds) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent |
| + * used by the responder (similar to request, u8) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by |
| + * the responder (similar to request, u8) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used |
| + * by the responder (similar to request, u8) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action |
| + * frames (optional, s32, 1/2 dBm) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action |
| + * frames (optional, s32, 1/2 dBm) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the |
| + * FTM action frame (optional, nested, using &enum nl80211_rate_info |
| + * attributes) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM |
| + * action frame (optional, nested, using &enum nl80211_rate_info attrs) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional |
| + * but one of RTT/DIST must be present) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that |
| + * standard deviation is the square root of variance, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, |
| + * optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional |
| + * but one of RTT/DIST must be present) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note |
| + * that standard deviation is the square root of variance, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) |
| + * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); |
| + * this is the contents of the Measurement Report Element (802.11-2016 |
| + * 9.4.2.22.1) starting with the Measurement Token, with Measurement |
| + * Type 8. |
| + * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer |
| + * (binary, optional); |
| + * this is the contents of the Measurement Report Element (802.11-2016 |
| + * 9.4.2.22.1) starting with the Measurement Token, with Measurement |
| + * Type 11. |
| + * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only |
| + * |
| + * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal |
| + * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number |
| + */ |
| +enum nl80211_peer_measurement_ftm_resp { |
| + __NL80211_PMSR_FTM_RESP_ATTR_INVALID, |
| + |
| + NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, |
| + NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, |
| + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, |
| + NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, |
| + NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, |
| + NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, |
| + NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, |
| + NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, |
| + NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, |
| + NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, |
| + NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, |
| + NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, |
| + NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, |
| + NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, |
| + NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, |
| + NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, |
| + NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, |
| + NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, |
| + NL80211_PMSR_FTM_RESP_ATTR_LCI, |
| + NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, |
| + NL80211_PMSR_FTM_RESP_ATTR_PAD, |
| + |
| + /* keep last */ |
| + NUM_NL80211_PMSR_FTM_RESP_ATTR, |
| + NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 |
| +}; |
| + |
| +/** |
| + * enum nl80211_obss_pd_attributes - OBSS packet detection attributes |
| + * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid |
| + * |
| + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. |
| + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. |
| + * |
| + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal |
| + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. |
| + */ |
| +enum nl80211_obss_pd_attributes { |
| + __NL80211_HE_OBSS_PD_ATTR_INVALID, |
| + |
| + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, |
| + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, |
| + |
| + /* keep last */ |
| + __NL80211_HE_OBSS_PD_ATTR_LAST, |
| + NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, |
| +}; |
| + |
| +/** |
| + * enum nl80211_bss_color_attributes - BSS Color attributes |
| + * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid |
| + * |
| + * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. |
| + * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. |
| + * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. |
| + * |
| + * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal |
| + * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. |
| + */ |
| +enum nl80211_bss_color_attributes { |
| + __NL80211_HE_BSS_COLOR_ATTR_INVALID, |
| + |
| + NL80211_HE_BSS_COLOR_ATTR_COLOR, |
| + NL80211_HE_BSS_COLOR_ATTR_DISABLED, |
| + NL80211_HE_BSS_COLOR_ATTR_PARTIAL, |
| + |
| + /* keep last */ |
| + __NL80211_HE_BSS_COLOR_ATTR_LAST, |
| + NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, |
| +}; |
| + |
| +/** |
| + * enum nl80211_iftype_akm_attributes - interface type AKM attributes |
| + * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid |
| + * |
| + * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag |
| + * attribute for each interface type that supports AKM suites specified in |
| + * %NL80211_IFTYPE_AKM_ATTR_SUITES |
| + * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported |
| + * AKM suites for the specified interface types. |
| + * |
| + * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal |
| + * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. |
| + */ |
| +enum nl80211_iftype_akm_attributes { |
| + __NL80211_IFTYPE_AKM_ATTR_INVALID, |
| + |
| + NL80211_IFTYPE_AKM_ATTR_IFTYPES, |
| + NL80211_IFTYPE_AKM_ATTR_SUITES, |
| + |
| + /* keep last */ |
| + __NL80211_IFTYPE_AKM_ATTR_LAST, |
| + NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, |
| +}; |
| + |
| #endif /* __LINUX_NL80211_H */ |
| -- |
| 2.35.1.723.g4982287a31-goog |
| |
