#!/bin/sh
# Copyright (c) 2010 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

. /usr/share/misc/shflags

DEFAULT_IF=eth0
DEFAULT_IF_IP=169.254.18.10
DEFAULT_DEV=/dev/ttyUSB0

DEFINE_boolean 'configure_interface' true\
  'Configure an interface to export data over'
DEFINE_string 'export_interface' $DEFAULT_IF 'Interface to configure'
DEFINE_string 'export_interface_ip' $DEFAULT_IF_IP \
  'IP address to configure export_interface to'
DEFINE_string 'export_device' $DEFAULT_DEV 'Device to export'

FLAGS "$@" || exit $?
eval set -- "${FLAGS_ARGV}"

set -e
if [ -z "$1" -o "$1" = "--help" -o "$1" = "help" ] ; then
  cat 2>&1 <<EOF
$0: Connect a modem to a debug server running on a remote machine.

As a convenience, configures the ethernet interface to an
AUTOIP address so that the interface can connect with a device hooked
directly to it over an ethernet cable.

  Examples:
  $0 169.254.54.76
      Configures ${DEFAULT_IF}'s IP address to $DEFAULT_IF_IP and connects to
      169.254.54.76
  $0 169.254.54.76 --noconfigure_interface
      Just connects; does not configure the interface.  Use this if
      you are not using a direct ethernet connection

If the connection is working, you will see hex dump data flying by.

EOF
  flags_help
  exit 1
fi

if [ $FLAGS_configure_interface = $FLAGS_TRUE ] ; then
  echo 2>&1 Configuring $FLAGS_export_interface to $FLAGS_export_interface_ip
  sudo /sbin/ifconfig $FLAGS_export_interface $FLAGS_export_interface_ip
fi

REMOTE_IP="$1"

echo 2>&1 Connecting $FLAGS_export_device to $REMOTE_IP
sudo stty -F $FLAGS_export_device raw
sudo socat -xdd TCP:$REMOTE_IP:2500 GOPEN:$FLAGS_export_device