| # Copyright 1999-2019 Gentoo Authors |
| # Distributed under the terms of the GNU General Public License v2 |
| |
| EAPI="6" |
| CROS_WORKON_PROJECT="chromiumos/third_party/hostap" |
| CROS_WORKON_EGIT_BRANCH="wpa_supplicant-2.10.0" |
| CROS_WORKON_LOCALNAME="../third_party/wpa_supplicant-cros/current" |
| |
| inherit cros-workon toolchain-funcs savedconfig |
| |
| DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon" |
| HOMEPAGE="http://w1.fi" |
| SRC_URI="" |
| |
| LICENSE="BSD" |
| SLOT="0" |
| KEYWORDS="~*" |
| IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +suiteb +wps +crda" |
| |
| DEPEND=" |
| libressl? ( dev-libs/libressl:0= ) |
| !libressl? ( |
| internal-tls? ( dev-libs/libtommath ) |
| !internal-tls? ( dev-libs/openssl:0=[-bindist] ) |
| ) |
| kernel_linux? ( |
| dev-libs/libnl:3 |
| crda? ( net-wireless/crda ) |
| ) |
| netlink? ( net-libs/libnfnetlink ) |
| sqlite? ( >=dev-db/sqlite-3 )" |
| |
| RDEPEND="${DEPEND}" |
| |
| src_unpack() { |
| cros-workon_src_unpack |
| S+="/hostapd" |
| } |
| |
| src_configure() { |
| append-lfs-flags |
| # hostapd is using only CFLAGS so append CPPFLAGS (configured by lfs) to it |
| append-cflags "${CPPFLAGS}" |
| |
| if use internal-tls; then |
| if use libressl; then |
| elog "libressl flag takes precedence over internal-tls" |
| else |
| ewarn "internal-tls implementation is experimental and provides fewer features" |
| fi |
| fi |
| |
| local CONFIG="${S}/.config" |
| |
| restore_config "${CONFIG}" |
| if [[ -f "${CONFIG}" ]]; then |
| default_src_configure |
| return 0 |
| fi |
| |
| # toolchain setup |
| echo "CC = $(tc-getCC)" > ${CONFIG} |
| |
| # EAP authentication methods |
| { |
| echo "CONFIG_EAP=y" |
| echo "CONFIG_ERP=y" |
| echo "CONFIG_EAP_MD5=y" |
| echo "CONFIG_SAE=y" |
| echo "CONFIG_OWE=y" |
| echo "CONFIG_DPP=y" |
| } >> ${CONFIG} |
| |
| if use suiteb; then |
| echo "CONFIG_SUITEB=y" >> ${CONFIG} |
| echo "CONFIG_SUITEB192=y" >> ${CONFIG} |
| fi |
| |
| if use internal-tls && ! use libressl; then |
| echo "CONFIG_TLS=internal" >> ${CONFIG} |
| else |
| # SSL authentication methods |
| { |
| echo "CONFIG_EAP_FAST=y" |
| echo "CONFIG_EAP_TLS=y" |
| echo "CONFIG_EAP_TTLS=y" |
| echo "CONFIG_EAP_MSCHAPV2=y" |
| echo "CONFIG_EAP_PEAP=y" |
| echo "CONFIG_TLSV11=y" |
| echo "CONFIG_TLSV12=y" |
| echo "CONFIG_EAP_PWD=y" |
| } >> ${CONFIG} |
| fi |
| |
| if use wps; then |
| # Enable Wi-Fi Protected Setup |
| { |
| echo "CONFIG_WPS=y" |
| echo "CONFIG_WPS2=y" |
| echo "CONFIG_WPS_UPNP=y" |
| echo "CONFIG_WPS_NFC=y" |
| } >> ${CONFIG} |
| einfo "Enabling Wi-Fi Protected Setup support" |
| fi |
| |
| { |
| echo "CONFIG_EAP_IKEV2=y" |
| echo "CONFIG_EAP_TNC=y" |
| echo "CONFIG_EAP_GTC=y" |
| echo "CONFIG_EAP_SIM=y" |
| echo "CONFIG_EAP_AKA=y" |
| echo "CONFIG_EAP_AKA_PRIME=y" |
| echo "CONFIG_EAP_EKE=y" |
| echo "CONFIG_EAP_FAST=y" |
| echo "CONFIG_EAP_PAX=y" |
| echo "CONFIG_EAP_PSK=y" |
| echo "CONFIG_EAP_SAKE=y" |
| echo "CONFIG_EAP_GPSK=y" |
| echo "CONFIG_EAP_GPSK_SHA256=y" |
| echo "CONFIG_EAP_UNAUTH_TLS=y" |
| echo "CONFIG_EAP_VENDOR_TEST=y" |
| } >> ${CONFIG} |
| |
| einfo "Enabling drivers: " |
| |
| # drivers |
| echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} |
| einfo " HostAP driver enabled" |
| echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} |
| einfo " Wired driver enabled" |
| echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} |
| einfo " None driver enabled" |
| |
| einfo " nl80211 driver enabled" |
| { |
| echo "CONFIG_DRIVER_NL80211=y" |
| |
| # epoll |
| echo "CONFIG_ELOOP_EPOLL=y" |
| |
| # misc |
| echo "CONFIG_DEBUG_FILE=y" |
| echo "CONFIG_PKCS12=y" |
| echo "CONFIG_RADIUS_SERVER=y" |
| echo "CONFIG_IAPP=y" |
| echo "CONFIG_IEEE80211R=y" |
| echo "CONFIG_IEEE80211W=y" |
| echo "CONFIG_IEEE80211N=y" |
| echo "CONFIG_IEEE80211AC=y" |
| echo "CONFIG_PEERKEY=y" |
| echo "CONFIG_RSN_PREAUTH=y" |
| echo "CONFIG_INTERWORKING=y" |
| echo "CONFIG_FULL_DYNAMIC_VLAN=y" |
| echo "CONFIG_HS20=y" |
| echo "CONFIG_WNM=y" |
| echo "CONFIG_FST=y" |
| echo "CONFIG_FST_TEST=y" |
| echo "CONFIG_ACS=y" |
| echo "CONFIG_MBO=y" |
| } >> ${CONFIG} |
| |
| # Disable random pool to work-around the slow random entropy |
| # generation on whirlwind. (See: crbug.com/1114912#c9) |
| # This is safe now because: |
| # 1. We now only use hostapd for tests. (on test APs or in |
| # network.Ethernet8021X.* tests.) |
| # 2. The random pool (and entropy estimations) seem to mostly be |
| # designed to guard against lack of initial entropy on a fresh |
| # boot, but they run at every startup. In the presence of many |
| # hostapd restarts, when "available entropy" gets drained by |
| # hostapd, /dev/urandom should still be seeded with enough entropy. |
| # However, if we want to launch AP support in CrOS, it would be better |
| # to re-evaluate this with security experts. |
| echo "CONFIG_NO_RANDOM_POOL=y" >> ${CONFIG} |
| |
| if use netlink; then |
| # Netlink support |
| echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} |
| fi |
| |
| if use ipv6; then |
| # IPv6 support |
| echo "CONFIG_IPV6=y" >> ${CONFIG} |
| fi |
| |
| if use sqlite; then |
| # Sqlite support |
| echo "CONFIG_SQLITE=y" >> ${CONFIG} |
| fi |
| |
| # If we are using libnl 2.0 and above, enable support for it |
| # Removed for now, since the 3.2 version is broken, and we don't |
| # support it. |
| if has_version ">=dev-libs/libnl-3.2"; then |
| echo "CONFIG_LIBNL32=y" >> .config |
| fi |
| |
| # TODO: Add support for BSD drivers |
| |
| default |
| } |
| |
| src_compile() { |
| emake V=1 |
| |
| if use libressl || ! use internal-tls; then |
| emake V=1 nt_password_hash |
| emake V=1 hlr_auc_gw |
| fi |
| } |
| |
| src_install() { |
| dosbin ${PN} |
| dobin ${PN}_cli |
| |
| if use libressl || ! use internal-tls; then |
| dobin nt_password_hash hlr_auc_gw |
| fi |
| |
| doman ${PN}{.8,_cli.1} |
| |
| dodoc ChangeLog README |
| use wps && dodoc README-WPS |
| |
| docinto examples |
| dodoc wired.conf |
| |
| if use logwatch; then |
| insinto /etc/log.d/conf/services/ |
| doins logwatch/${PN}.conf |
| |
| exeinto /etc/log.d/scripts/services/ |
| doexe logwatch/${PN} |
| fi |
| |
| save_config .config |
| } |
| |
| pkg_postinst() { |
| einfo |
| einfo "If you are running openRC you need to follow this instructions:" |
| einfo "In order to use ${PN} you need to set up your wireless card" |
| einfo "for master mode in /etc/conf.d/net and then start" |
| einfo "/etc/init.d/${PN}." |
| einfo |
| einfo "Example configuration:" |
| einfo |
| einfo "config_wlan0=( \"192.168.1.1/24\" )" |
| einfo "channel_wlan0=\"6\"" |
| einfo "essid_wlan0=\"test\"" |
| einfo "mode_wlan0=\"master\"" |
| einfo |
| #if [ -e "${KV_DIR}"/net/mac80211 ]; then |
| # einfo "This package now compiles against the headers installed by" |
| # einfo "the kernel source for the mac80211 driver. You should " |
| # einfo "re-emerge ${PN} after upgrading your kernel source." |
| #fi |
| |
| if use wps; then |
| einfo "You have enabled Wi-Fi Protected Setup support, please" |
| einfo "read the README-WPS file in /usr/share/doc/${P}" |
| einfo "for info on how to use WPS" |
| fi |
| } |