net-wireless/hostapd/hostapd-2.11_pre-r212.ebuild - third_party/overlays/chromiumos-overlay - Git at Google

 # Copyright 1999-2019 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2

 EAPI="6"
 CROS_WORKON_COMMIT="e6953d6246e548337deff22c45deb3e6c8da9b02"
 CROS_WORKON_TREE="68c842f961ee688abbcee91486aed6dc30e59819"
 CROS_WORKON_PROJECT="chromiumos/third_party/hostap"
 CROS_WORKON_EGIT_BRANCH="wpa_supplicant-2.10.0"
 CROS_WORKON_LOCALNAME="../third_party/wpa_supplicant-cros/current"

 inherit cros-workon toolchain-funcs savedconfig

 DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
 HOMEPAGE="http://w1.fi"
 SRC_URI=""

 LICENSE="BSD"
 SLOT="0"
 KEYWORDS="*"
 IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +suiteb +wps +crda"

 DEPEND="
 	libressl? ( dev-libs/libressl:0= )
 	!libressl? (
 		internal-tls? ( dev-libs/libtommath )
 		!internal-tls? ( dev-libs/openssl:0=[-bindist] )
 	)
 	kernel_linux? (
 		dev-libs/libnl:3
 		crda? ( net-wireless/crda )
 	)
 	netlink? ( net-libs/libnfnetlink )
 	sqlite? ( >=dev-db/sqlite-3 )"

 RDEPEND="${DEPEND}"

 src_unpack() {
 	cros-workon_src_unpack
 	S+="/hostapd"
 }

 src_configure() {
 	append-lfs-flags
 	# hostapd is using only CFLAGS so append CPPFLAGS (configured by lfs) to it
 	append-cflags "${CPPFLAGS}"

 	if use internal-tls; then
 		if use libressl; then
 			elog "libressl flag takes precedence over internal-tls"
 		else
 			ewarn "internal-tls implementation is experimental and provides fewer features"
 		fi
 	fi

 	local CONFIG="${S}/.config"

 	restore_config "${CONFIG}"
 	if [[ -f "${CONFIG}" ]]; then
 		default_src_configure
 		return 0
 	fi

 	# toolchain setup
 	echo "CC = $(tc-getCC)" > ${CONFIG}

 	# EAP authentication methods
 	{
 		echo "CONFIG_EAP=y"
 		echo "CONFIG_ERP=y"
 		echo "CONFIG_EAP_MD5=y"
 		echo "CONFIG_SAE=y"
 		echo "CONFIG_OWE=y"
 		echo "CONFIG_DPP=y"
 	} >> ${CONFIG}

 	if use suiteb; then
 		echo "CONFIG_SUITEB=y" >> ${CONFIG}
 		echo "CONFIG_SUITEB192=y" >> ${CONFIG}
 	fi

 	if use internal-tls && ! use libressl; then
 		echo "CONFIG_TLS=internal" >> ${CONFIG}
 	else
 		# SSL authentication methods
 		{
 			echo "CONFIG_EAP_FAST=y"
 			echo "CONFIG_EAP_TLS=y"
 			echo "CONFIG_EAP_TTLS=y"
 			echo "CONFIG_EAP_MSCHAPV2=y"
 			echo "CONFIG_EAP_PEAP=y"
 			echo "CONFIG_TLSV11=y"
 			echo "CONFIG_TLSV12=y"
 			echo "CONFIG_EAP_PWD=y"
 		} >> ${CONFIG}
 	fi

 	if use wps; then
 		# Enable Wi-Fi Protected Setup
 		{
 			echo "CONFIG_WPS=y"
 			echo "CONFIG_WPS2=y"
 			echo "CONFIG_WPS_UPNP=y"
 			echo "CONFIG_WPS_NFC=y"
 		} >> ${CONFIG}
 		einfo "Enabling Wi-Fi Protected Setup support"
 	fi

 	{
 		echo "CONFIG_EAP_IKEV2=y"
 		echo "CONFIG_EAP_TNC=y"
 		echo "CONFIG_EAP_GTC=y"
 		echo "CONFIG_EAP_SIM=y"
 		echo "CONFIG_EAP_AKA=y"
 		echo "CONFIG_EAP_AKA_PRIME=y"
 		echo "CONFIG_EAP_EKE=y"
 		echo "CONFIG_EAP_FAST=y"
 		echo "CONFIG_EAP_PAX=y"
 		echo "CONFIG_EAP_PSK=y"
 		echo "CONFIG_EAP_SAKE=y"
 		echo "CONFIG_EAP_GPSK=y"
 		echo "CONFIG_EAP_GPSK_SHA256=y"
 		echo "CONFIG_EAP_UNAUTH_TLS=y"
 		echo "CONFIG_EAP_VENDOR_TEST=y"
 	} >> ${CONFIG}

 	einfo "Enabling drivers: "

 	# drivers
 	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
 	einfo "  HostAP driver enabled"
 	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
 	einfo "  Wired driver enabled"
 	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
 	einfo "  None driver enabled"

 	einfo "  nl80211 driver enabled"
 	{
 		echo "CONFIG_DRIVER_NL80211=y"

 		# epoll
 		echo "CONFIG_ELOOP_EPOLL=y"

 		# misc
 		echo "CONFIG_DEBUG_FILE=y"
 		echo "CONFIG_PKCS12=y"
 		echo "CONFIG_RADIUS_SERVER=y"
 		echo "CONFIG_IAPP=y"
 		echo "CONFIG_IEEE80211R=y"
 		echo "CONFIG_IEEE80211W=y"
 		echo "CONFIG_IEEE80211N=y"
 		echo "CONFIG_IEEE80211AC=y"
 		echo "CONFIG_PEERKEY=y"
 		echo "CONFIG_RSN_PREAUTH=y"
 		echo "CONFIG_INTERWORKING=y"
 		echo "CONFIG_FULL_DYNAMIC_VLAN=y"
 		echo "CONFIG_HS20=y"
 		echo "CONFIG_WNM=y"
 		echo "CONFIG_FST=y"
 		echo "CONFIG_FST_TEST=y"
 		echo "CONFIG_ACS=y"
 		echo "CONFIG_MBO=y"
 	} >> ${CONFIG}

 	# Disable random pool to work-around the slow random entropy
 	# generation on whirlwind. (See: crbug.com/1114912#c9)
 	# This is safe now because:
 	# 1. We now only use hostapd for tests. (on test APs or in
 	#    network.Ethernet8021X.* tests.)
 	# 2. The random pool (and entropy estimations) seem to mostly be
 	#    designed to guard against lack of initial entropy on a fresh
 	#    boot, but they run at every startup. In the presence of many
 	#    hostapd restarts, when "available entropy" gets drained by
 	#    hostapd, /dev/urandom should still be seeded with enough entropy.
 	# However, if we want to launch AP support in CrOS, it would be better
 	# to re-evaluate this with security experts.
 	echo "CONFIG_NO_RANDOM_POOL=y" >> ${CONFIG}

 	if use netlink; then
 		# Netlink support
 		echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
 	fi

 	if use ipv6; then
 		# IPv6 support
 		echo "CONFIG_IPV6=y" >> ${CONFIG}
 	fi

 	if use sqlite; then
 		# Sqlite support
 		echo "CONFIG_SQLITE=y" >> ${CONFIG}
 	fi

 	# If we are using libnl 2.0 and above, enable support for it
 	# Removed for now, since the 3.2 version is broken, and we don't
 	# support it.
 	if has_version ">=dev-libs/libnl-3.2"; then
 		echo "CONFIG_LIBNL32=y" >> .config
 	fi

 	# TODO: Add support for BSD drivers

 	default
 }

 src_compile() {
 	emake V=1

 	if use libressl || ! use internal-tls; then
 		emake V=1 nt_password_hash
 		emake V=1 hlr_auc_gw
 	fi
 }

 src_install() {
 	dosbin ${PN}
 	dobin ${PN}_cli

 	if use libressl || ! use internal-tls; then
 		dobin nt_password_hash hlr_auc_gw
 	fi

 	doman ${PN}{.8,_cli.1}

 	dodoc ChangeLog README
 	use wps && dodoc README-WPS

 	docinto examples
 	dodoc wired.conf

 	if use logwatch; then
 		insinto /etc/log.d/conf/services/
 		doins logwatch/${PN}.conf

 		exeinto /etc/log.d/scripts/services/
 		doexe logwatch/${PN}
 	fi

 	save_config .config
 }

 pkg_postinst() {
 	einfo
 	einfo "If you are running openRC you need to follow this instructions:"
 	einfo "In order to use ${PN} you need to set up your wireless card"
 	einfo "for master mode in /etc/conf.d/net and then start"
 	einfo "/etc/init.d/${PN}."
 	einfo
 	einfo "Example configuration:"
 	einfo
 	einfo "config_wlan0=( \"192.168.1.1/24\" )"
 	einfo "channel_wlan0=\"6\""
 	einfo "essid_wlan0=\"test\""
 	einfo "mode_wlan0=\"master\""
 	einfo
 	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
 	#	einfo "This package now compiles against the headers installed by"
 	#	einfo "the kernel source for the mac80211 driver. You should "
 	#	einfo "re-emerge ${PN} after upgrading your kernel source."
 	#fi

 	if use wps; then
 		einfo "You have enabled Wi-Fi Protected Setup support, please"
 		einfo "read the README-WPS file in /usr/share/doc/${P}"
 		einfo "for info on how to use WPS"
 	fi
 }
	# Copyright 1999-2019 Gentoo Authors
	# Distributed under the terms of the GNU General Public License v2

	EAPI="6"
	CROS_WORKON_COMMIT="e6953d6246e548337deff22c45deb3e6c8da9b02"
	CROS_WORKON_TREE="68c842f961ee688abbcee91486aed6dc30e59819"
	CROS_WORKON_PROJECT="chromiumos/third_party/hostap"
	CROS_WORKON_EGIT_BRANCH="wpa_supplicant-2.10.0"
	CROS_WORKON_LOCALNAME="../third_party/wpa_supplicant-cros/current"

	inherit cros-workon toolchain-funcs savedconfig

	DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
	HOMEPAGE="http://w1.fi"
	SRC_URI=""

	LICENSE="BSD"
	SLOT="0"
	KEYWORDS="*"
	IUSE="internal-tls ipv6 libressl logwatch netlink sqlite +suiteb +wps +crda"

	DEPEND="
	libressl? ( dev-libs/libressl:0= )
	!libressl? (
	internal-tls? ( dev-libs/libtommath )
	!internal-tls? ( dev-libs/openssl:0=[-bindist] )
	)
	kernel_linux? (
	dev-libs/libnl:3
	crda? ( net-wireless/crda )
	)
	netlink? ( net-libs/libnfnetlink )
	sqlite? ( >=dev-db/sqlite-3 )"

	RDEPEND="${DEPEND}"

	src_unpack() {
	cros-workon_src_unpack
	S+="/hostapd"
	}

	src_configure() {
	append-lfs-flags
	# hostapd is using only CFLAGS so append CPPFLAGS (configured by lfs) to it
	append-cflags "${CPPFLAGS}"

	if use internal-tls; then
	if use libressl; then
	elog "libressl flag takes precedence over internal-tls"
	else
	ewarn "internal-tls implementation is experimental and provides fewer features"
	fi
	fi

	local CONFIG="${S}/.config"

	restore_config "${CONFIG}"
	if [[ -f "${CONFIG}" ]]; then
	default_src_configure
	return 0
	fi

	# toolchain setup
	echo "CC = $(tc-getCC)" > ${CONFIG}

	# EAP authentication methods
	{
	echo "CONFIG_EAP=y"
	echo "CONFIG_ERP=y"
	echo "CONFIG_EAP_MD5=y"
	echo "CONFIG_SAE=y"
	echo "CONFIG_OWE=y"
	echo "CONFIG_DPP=y"
	} >> ${CONFIG}

	if use suiteb; then
	echo "CONFIG_SUITEB=y" >> ${CONFIG}
	echo "CONFIG_SUITEB192=y" >> ${CONFIG}
	fi

	if use internal-tls && ! use libressl; then
	echo "CONFIG_TLS=internal" >> ${CONFIG}
	else
	# SSL authentication methods
	{
	echo "CONFIG_EAP_FAST=y"
	echo "CONFIG_EAP_TLS=y"
	echo "CONFIG_EAP_TTLS=y"
	echo "CONFIG_EAP_MSCHAPV2=y"
	echo "CONFIG_EAP_PEAP=y"
	echo "CONFIG_TLSV11=y"
	echo "CONFIG_TLSV12=y"
	echo "CONFIG_EAP_PWD=y"
	} >> ${CONFIG}
	fi

	if use wps; then
	# Enable Wi-Fi Protected Setup
	{
	echo "CONFIG_WPS=y"
	echo "CONFIG_WPS2=y"
	echo "CONFIG_WPS_UPNP=y"
	echo "CONFIG_WPS_NFC=y"
	} >> ${CONFIG}
	einfo "Enabling Wi-Fi Protected Setup support"
	fi

	{
	echo "CONFIG_EAP_IKEV2=y"
	echo "CONFIG_EAP_TNC=y"
	echo "CONFIG_EAP_GTC=y"
	echo "CONFIG_EAP_SIM=y"
	echo "CONFIG_EAP_AKA=y"
	echo "CONFIG_EAP_AKA_PRIME=y"
	echo "CONFIG_EAP_EKE=y"
	echo "CONFIG_EAP_FAST=y"
	echo "CONFIG_EAP_PAX=y"
	echo "CONFIG_EAP_PSK=y"
	echo "CONFIG_EAP_SAKE=y"
	echo "CONFIG_EAP_GPSK=y"
	echo "CONFIG_EAP_GPSK_SHA256=y"
	echo "CONFIG_EAP_UNAUTH_TLS=y"
	echo "CONFIG_EAP_VENDOR_TEST=y"
	} >> ${CONFIG}

	einfo "Enabling drivers: "

	# drivers
	echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
	einfo " HostAP driver enabled"
	echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
	einfo " Wired driver enabled"
	echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
	einfo " None driver enabled"

	einfo " nl80211 driver enabled"
	{
	echo "CONFIG_DRIVER_NL80211=y"

	# epoll
	echo "CONFIG_ELOOP_EPOLL=y"

	# misc
	echo "CONFIG_DEBUG_FILE=y"
	echo "CONFIG_PKCS12=y"
	echo "CONFIG_RADIUS_SERVER=y"
	echo "CONFIG_IAPP=y"
	echo "CONFIG_IEEE80211R=y"
	echo "CONFIG_IEEE80211W=y"
	echo "CONFIG_IEEE80211N=y"
	echo "CONFIG_IEEE80211AC=y"
	echo "CONFIG_PEERKEY=y"
	echo "CONFIG_RSN_PREAUTH=y"
	echo "CONFIG_INTERWORKING=y"
	echo "CONFIG_FULL_DYNAMIC_VLAN=y"
	echo "CONFIG_HS20=y"
	echo "CONFIG_WNM=y"
	echo "CONFIG_FST=y"
	echo "CONFIG_FST_TEST=y"
	echo "CONFIG_ACS=y"
	echo "CONFIG_MBO=y"
	} >> ${CONFIG}

	# Disable random pool to work-around the slow random entropy
	# generation on whirlwind. (See: crbug.com/1114912#c9)
	# This is safe now because:
	# 1. We now only use hostapd for tests. (on test APs or in
	# network.Ethernet8021X.* tests.)
	# 2. The random pool (and entropy estimations) seem to mostly be
	# designed to guard against lack of initial entropy on a fresh
	# boot, but they run at every startup. In the presence of many
	# hostapd restarts, when "available entropy" gets drained by
	# hostapd, /dev/urandom should still be seeded with enough entropy.
	# However, if we want to launch AP support in CrOS, it would be better
	# to re-evaluate this with security experts.
	echo "CONFIG_NO_RANDOM_POOL=y" >> ${CONFIG}

	if use netlink; then
	# Netlink support
	echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
	fi

	if use ipv6; then
	# IPv6 support
	echo "CONFIG_IPV6=y" >> ${CONFIG}
	fi

	if use sqlite; then
	# Sqlite support
	echo "CONFIG_SQLITE=y" >> ${CONFIG}
	fi

	# If we are using libnl 2.0 and above, enable support for it
	# Removed for now, since the 3.2 version is broken, and we don't
	# support it.
	if has_version ">=dev-libs/libnl-3.2"; then
	echo "CONFIG_LIBNL32=y" >> .config
	fi

	# TODO: Add support for BSD drivers

	default
	}

	src_compile() {
	emake V=1

	if use libressl \|\| ! use internal-tls; then
	emake V=1 nt_password_hash
	emake V=1 hlr_auc_gw
	fi
	}

	src_install() {
	dosbin ${PN}
	dobin ${PN}_cli

	if use libressl \|\| ! use internal-tls; then
	dobin nt_password_hash hlr_auc_gw
	fi

	doman ${PN}{.8,_cli.1}

	dodoc ChangeLog README
	use wps && dodoc README-WPS

	docinto examples
	dodoc wired.conf

	if use logwatch; then
	insinto /etc/log.d/conf/services/
	doins logwatch/${PN}.conf

	exeinto /etc/log.d/scripts/services/
	doexe logwatch/${PN}
	fi

	save_config .config
	}

	pkg_postinst() {
	einfo
	einfo "If you are running openRC you need to follow this instructions:"
	einfo "In order to use ${PN} you need to set up your wireless card"
	einfo "for master mode in /etc/conf.d/net and then start"
	einfo "/etc/init.d/${PN}."
	einfo
	einfo "Example configuration:"
	einfo
	einfo "config_wlan0=( \"192.168.1.1/24\" )"
	einfo "channel_wlan0=\"6\""
	einfo "essid_wlan0=\"test\""
	einfo "mode_wlan0=\"master\""
	einfo
	#if [ -e "${KV_DIR}"/net/mac80211 ]; then
	# einfo "This package now compiles against the headers installed by"
	# einfo "the kernel source for the mac80211 driver. You should "
	# einfo "re-emerge ${PN} after upgrading your kernel source."
	#fi

	if use wps; then
	einfo "You have enabled Wi-Fi Protected Setup support, please"
	einfo "read the README-WPS file in /usr/share/doc/${P}"
	einfo "for info on how to use WPS"
	fi
	}