/*
 * Universal Flash Storage Host controller driver
 *
 * This code is based on drivers/scsi/ufs/ufshci.h
 * Copyright (C) 2011-2013 Samsung India Software Operations
 *
 * Authors:
 *	Santosh Yaraganavi <santosh.sy@samsung.com>
 *	Vinayak Holikatti <h.vinayak@samsung.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * See the COPYING file in the top-level directory or visit
 * <http://www.gnu.org/licenses/gpl-2.0.html>
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * This program is provided "AS IS" and "WITH ALL FAULTS" and
 * without warranty of any kind. You are solely responsible for
 * determining the appropriateness of using and distributing
 * the program and assume all risks associated with your exercise
 * of rights with respect to the program, including but not limited
 * to infringement of third party rights, the risks and costs of
 * program errors, damage to or loss of data, programs or equipment,
 * and unavailability or interruption of operations. Under no
 * circumstances will the contributor of this Program be liable for
 * any damages of any kind arising from your use or distribution of
 * this program.
 */

#ifndef _UFSHCI_H
#define _UFSHCI_H

enum {
	TASK_REQ_UPIU_SIZE_DWORDS	= 8,
	TASK_RSP_UPIU_SIZE_DWORDS	= 8,
	ALIGNED_UPIU_SIZE		= 512,
};

/* UFSHCI Registers */
enum {
	REG_CONTROLLER_CAPABILITIES		= 0x00,
	REG_UFS_VERSION				= 0x08,
	REG_CONTROLLER_DEV_ID			= 0x10,
	REG_CONTROLLER_PROD_ID			= 0x14,
	REG_AUTO_HIBERNATE_IDLE_TIMER		= 0x18,
	REG_INTERRUPT_STATUS			= 0x20,
	REG_INTERRUPT_ENABLE			= 0x24,
	REG_CONTROLLER_STATUS			= 0x30,
	REG_CONTROLLER_ENABLE			= 0x34,
	REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER	= 0x38,
	REG_UIC_ERROR_CODE_DATA_LINK_LAYER	= 0x3C,
	REG_UIC_ERROR_CODE_NETWORK_LAYER	= 0x40,
	REG_UIC_ERROR_CODE_TRANSPORT_LAYER	= 0x44,
	REG_UIC_ERROR_CODE_DME			= 0x48,
	REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL	= 0x4C,
	REG_UTP_TRANSFER_REQ_LIST_BASE_L	= 0x50,
	REG_UTP_TRANSFER_REQ_LIST_BASE_H	= 0x54,
	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
	REG_UTP_TASK_REQ_LIST_CLEAR		= 0x7C,
	REG_UTP_TASK_REQ_LIST_RUN_STOP		= 0x80,
	REG_UIC_COMMAND				= 0x90,
	REG_UIC_COMMAND_ARG_1			= 0x94,
	REG_UIC_COMMAND_ARG_2			= 0x98,
	REG_UIC_COMMAND_ARG_3			= 0x9C,

	UFSHCI_REG_SPACE_SIZE			= 0xA0,

	REG_UFS_CCAP				= 0x100,
	REG_UFS_CRYPTOCAP			= 0x104,

	UFSHCI_CRYPTO_REG_SPACE_SIZE		= 0x400,
};

/* Controller capability masks */
enum {
	MASK_TRANSFER_REQUESTS_SLOTS		= 0x0000001F,
	MASK_TASK_MANAGEMENT_REQUEST_SLOTS	= 0x00070000,
	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
};

#define UFS_MASK(mask, offset)		((mask) << (offset))

/* UFS Version 08h */
#define MINOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 0)
#define MAJOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 16)

/* Controller UFSHCI version */
enum {
	UFSHCI_VERSION_10 = 0x00010000, /* 1.0 */
	UFSHCI_VERSION_11 = 0x00010100, /* 1.1 */
	UFSHCI_VERSION_20 = 0x00000200, /* 2.0 */
	UFSHCI_VERSION_21 = 0x00000210, /* 2.1 */
};

/*
 * HCDDID - Host Controller Identification Descriptor
 *	  - Device ID and Device Class 10h
 */
#define DEVICE_CLASS	UFS_MASK(0xFFFF, 0)
#define DEVICE_ID	UFS_MASK(0xFF, 24)

/*
 * HCPMID - Host Controller Identification Descriptor
 *	  - Product/Manufacturer ID  14h
 */
#define MANUFACTURE_ID_MASK	UFS_MASK(0xFFFF, 0)
#define PRODUCT_ID_MASK		UFS_MASK(0xFFFF, 16)

/*
 * IS - Interrupt Status - 20h
 */
#define UTP_TRANSFER_REQ_COMPL			0x1
#define UIC_DME_END_PT_RESET			0x2
#define UIC_ERROR				0x4
#define UIC_TEST_MODE				0x8
#define UIC_POWER_MODE				0x10
#define UIC_HIBERNATE_EXIT			0x20
#define UIC_HIBERNATE_ENTER			0x40
#define UIC_LINK_LOST				0x80
#define UIC_LINK_STARTUP			0x100
#define UTP_TASK_REQ_COMPL			0x200
#define UIC_COMMAND_COMPL			0x400
#define DEVICE_FATAL_ERROR			0x800
#define CONTROLLER_FATAL_ERROR			0x10000
#define SYSTEM_BUS_FATAL_ERROR			0x20000

#define UFSHCD_UIC_PWR_MASK	(UIC_HIBERNATE_ENTER |\
				UIC_HIBERNATE_EXIT |\
				UIC_POWER_MODE)

#define UFSHCD_UIC_MASK		(UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)

#define UFSHCD_ERROR_MASK	(UIC_ERROR |\
				DEVICE_FATAL_ERROR |\
				CONTROLLER_FATAL_ERROR |\
				SYSTEM_BUS_FATAL_ERROR)

#define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
				CONTROLLER_FATAL_ERROR |\
				SYSTEM_BUS_FATAL_ERROR)

/* HCS - Host Controller Status 30h */
#define DEVICE_PRESENT				0x1
#define UTP_TRANSFER_REQ_LIST_READY		0x2
#define UTP_TASK_REQ_LIST_READY			0x4
#define UIC_COMMAND_READY			0x8
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)

#define UFSHCD_STATUS_READY	(UTP_TRANSFER_REQ_LIST_READY |\
				UTP_TASK_REQ_LIST_READY |\
				UIC_COMMAND_READY)

enum {
	PWR_OK		= 0x0,
	PWR_LOCAL	= 0x01,
	PWR_REMOTE	= 0x02,
	PWR_BUSY	= 0x03,
	PWR_ERROR_CAP	= 0x04,
	PWR_FATAL_ERROR	= 0x05,
};

/* HCE - Host Controller Enable 34h */
#define CONTROLLER_ENABLE	0x1
#define CONTROLLER_DISABLE	0x0
#define CRYPTO_GENERAL_ENABLE	0x2

/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
#define UIC_PHY_ADAPTER_LAYER_ERROR			0x80000000
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK		0x1F
#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK		0xF

/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
#define UIC_DATA_LINK_LAYER_ERROR		0x80000000
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK	0x7FFF
#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT	0x2000
#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED	0x0001
#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002

/* UECN - Host UIC Error Code Network Layer 40h */
#define UIC_NETWORK_LAYER_ERROR			0x80000000
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK	0x7

/* UECT - Host UIC Error Code Transport Layer 44h */
#define UIC_TRANSPORT_LAYER_ERROR		0x80000000
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK	0x7F

/* UECDME - Host UIC Error Code DME 48h */
#define UIC_DME_ERROR			0x80000000
#define UIC_DME_ERROR_CODE_MASK		0x1

/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
#define INT_AGGR_TIMEOUT_VAL_MASK		0xFF
#define INT_AGGR_COUNTER_THRESHOLD_MASK		UFS_MASK(0x1F, 8)
#define INT_AGGR_COUNTER_AND_TIMER_RESET	0x10000
#define INT_AGGR_STATUS_BIT			0x100000
#define INT_AGGR_PARAM_WRITE			0x1000000
#define INT_AGGR_ENABLE				0x80000000

/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	0x1

/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1

/* UICCMD - UIC Command */
#define COMMAND_OPCODE_MASK		0xFF
#define GEN_SELECTOR_INDEX_MASK		0xFFFF

#define MIB_ATTRIBUTE_MASK		UFS_MASK(0xFFFF, 16)
#define RESET_LEVEL			0xFF

#define ATTR_SET_TYPE_MASK		UFS_MASK(0xFF, 16)
#define CONFIG_RESULT_CODE_MASK		0xFF
#define GENERIC_ERROR_CODE_MASK		0xFF

/* GenSelectorIndex calculation macros for M-PHY attributes */
#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))

#define UIC_ARG_MIB_SEL(attr, sel)	((((attr) & 0xFFFF) << 16) |\
					 ((sel) & 0xFFFF))
#define UIC_ARG_MIB(attr)		UIC_ARG_MIB_SEL(attr, 0)
#define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
#define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)

/* Link Status*/
enum link_status {
	UFSHCD_LINK_IS_DOWN	= 1,
	UFSHCD_LINK_IS_UP	= 2,
};

/* UIC Commands */
enum uic_cmd_dme {
	UIC_CMD_DME_GET			= 0x01,
	UIC_CMD_DME_SET			= 0x02,
	UIC_CMD_DME_PEER_GET		= 0x03,
	UIC_CMD_DME_PEER_SET		= 0x04,
	UIC_CMD_DME_POWERON		= 0x10,
	UIC_CMD_DME_POWEROFF		= 0x11,
	UIC_CMD_DME_ENABLE		= 0x12,
	UIC_CMD_DME_RESET		= 0x14,
	UIC_CMD_DME_END_PT_RST		= 0x15,
	UIC_CMD_DME_LINK_STARTUP	= 0x16,
	UIC_CMD_DME_HIBER_ENTER		= 0x17,
	UIC_CMD_DME_HIBER_EXIT		= 0x18,
	UIC_CMD_DME_TEST_MODE		= 0x1A,
};

/* UIC Config result code / Generic error code */
enum {
	UIC_CMD_RESULT_SUCCESS			= 0x00,
	UIC_CMD_RESULT_INVALID_ATTR		= 0x01,
	UIC_CMD_RESULT_FAILURE			= 0x01,
	UIC_CMD_RESULT_INVALID_ATTR_VALUE	= 0x02,
	UIC_CMD_RESULT_READ_ONLY_ATTR		= 0x03,
	UIC_CMD_RESULT_WRITE_ONLY_ATTR		= 0x04,
	UIC_CMD_RESULT_BAD_INDEX		= 0x05,
	UIC_CMD_RESULT_LOCKED_ATTR		= 0x06,
	UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX	= 0x07,
	UIC_CMD_RESULT_PEER_COMM_FAILURE	= 0x08,
	UIC_CMD_RESULT_BUSY			= 0x09,
	UIC_CMD_RESULT_DME_FAILURE		= 0x0A,
};

#define MASK_UIC_COMMAND_RESULT			0xFF

#define INT_AGGR_COUNTER_THLD_VAL(c)	(((c) & 0x1F) << 8)
#define INT_AGGR_TIMEOUT_VAL(t)		(((t) & 0xFF) << 0)

/* Interrupt disable masks */
enum {
	/* Interrupt disable mask for UFSHCI v1.0 */
	INTERRUPT_MASK_ALL_VER_10	= 0x30FFF,
	INTERRUPT_MASK_RW_VER_10	= 0x30000,

	/* Interrupt disable mask for UFSHCI v1.1 */
	INTERRUPT_MASK_ALL_VER_11	= 0x31FFF,

	/* Interrupt disable mask for UFSHCI v2.1 */
	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
};

/*
 * Request Descriptor Definitions
 */

/* Transfer request command type */
enum {
	UTP_CMD_TYPE_SCSI		= 0x0,
	UTP_CMD_TYPE_UFS		= 0x1,
	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
};

/* To accommodate UFS2.0 required Command type */
enum {
	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,
};

enum {
	UTP_SCSI_COMMAND		= 0x00000000,
	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
	UTP_REQ_DESC_INT_CMD		= 0x01000000,
};

/* UTP Transfer Request Data Direction (DD) */
enum {
	UTP_NO_DATA_TRANSFER	= 0x00000000,
	UTP_HOST_TO_DEVICE	= 0x02000000,
	UTP_DEVICE_TO_HOST	= 0x04000000,
};

/* Overall command status values */
enum {
	OCS_SUCCESS			= 0x0,
	OCS_INVALID_CMD_TABLE_ATTR	= 0x1,
	OCS_INVALID_PRDT_ATTR		= 0x2,
	OCS_MISMATCH_DATA_BUF_SIZE	= 0x3,
	OCS_MISMATCH_RESP_UPIU_SIZE	= 0x4,
	OCS_PEER_COMM_FAILURE		= 0x5,
	OCS_ABORTED			= 0x6,
	OCS_FATAL_ERROR			= 0x7,
	OCS_INVALID_COMMAND_STATUS	= 0x0F,
	MASK_OCS			= 0x0F,
};

/* The maximum length of the data byte count field in the PRDT is 256KB */
#define PRDT_DATA_BYTE_COUNT_MAX	(256 * 1024)
/* The granularity of the data byte count field in the PRDT is 32-bit */
#define PRDT_DATA_BYTE_COUNT_PAD	4

/**
 * struct ufshcd_sg_entry - UFSHCI PRD Entry
 * @base_addr: Lower 32bit physical address DW-0
 * @upper_addr: Upper 32bit physical address DW-1
 * @reserved: Reserved for future use DW-2
 * @size: size of physical segment DW-3
 */
struct ufshcd_sg_entry {
	__le32    base_addr;
	__le32    upper_addr;
	__le32    reserved;
	__le32    size;
};

/**
 * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
 * @command_upiu: Command UPIU Frame address
 * @response_upiu: Response UPIU Frame address
 * @prd_table: Physical Region Descriptor
 */
struct utp_transfer_cmd_desc {
	u8 command_upiu[ALIGNED_UPIU_SIZE];
	u8 response_upiu[ALIGNED_UPIU_SIZE];
	struct ufshcd_sg_entry    prd_table[SG_ALL];
};

/**
 * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
 * @dword0: Descriptor Header DW0
 * @dword1: Descriptor Header DW1
 * @dword2: Descriptor Header DW2
 * @dword3: Descriptor Header DW3
 */
struct request_desc_header {
	__le32 dword_0;
	__le32 dword_1;
	__le32 dword_2;
	__le32 dword_3;
};

/**
 * struct utp_transfer_req_desc - UTRD structure
 * @header: UTRD header DW-0 to DW-3
 * @command_desc_base_addr_lo: UCD base address low DW-4
 * @command_desc_base_addr_hi: UCD base address high DW-5
 * @response_upiu_length: response UPIU length DW-6
 * @response_upiu_offset: response UPIU offset DW-6
 * @prd_table_length: Physical region descriptor length DW-7
 * @prd_table_offset: Physical region descriptor offset DW-7
 */
struct utp_transfer_req_desc {

	/* DW 0-3 */
	struct request_desc_header header;

	/* DW 4-5*/
	__le32  command_desc_base_addr_lo;
	__le32  command_desc_base_addr_hi;

	/* DW 6 */
	__le16  response_upiu_length;
	__le16  response_upiu_offset;

	/* DW 7 */
	__le16  prd_table_length;
	__le16  prd_table_offset;
};

/**
 * struct utp_task_req_desc - UTMRD structure
 * @header: UTMRD header DW-0 to DW-3
 * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
 * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
 */
struct utp_task_req_desc {

	/* DW 0-3 */
	struct request_desc_header header;

	/* DW 4-11 */
	__le32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];

	/* DW 12-19 */
	__le32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
};

#endif /* End of Header */