| // SPDX-License-Identifier: GPL-2.0 |
| /****************************************************************************** |
| |
| Copyright(c) 2004 Intel Corporation. All rights reserved. |
| |
| Portions of this file are based on the WEP enablement code provided by the |
| Host AP project hostap-drivers v0.1.3 |
| Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen |
| <jkmaline@cc.hut.fi> |
| Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> |
| |
| Contact Information: |
| James P. Ketrenos <ipw2100-admin@linux.intel.com> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| ******************************************************************************/ |
| #include <linux/wireless.h> |
| #include <linux/kmod.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| #include "ieee80211.h" |
| struct modes_unit { |
| char *mode_string; |
| int mode_size; |
| }; |
| static struct modes_unit ieee80211_modes[] = { |
| {"a", 1}, |
| {"b", 1}, |
| {"g", 1}, |
| {"?", 1}, |
| {"N-24G", 5}, |
| {"N-5G", 4}, |
| }; |
| |
| #define iwe_stream_add_event_rsl iwe_stream_add_event |
| |
| #define MAX_CUSTOM_LEN 64 |
| static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee, |
| char *start, char *stop, |
| struct ieee80211_network *network, |
| struct iw_request_info *info) |
| { |
| char custom[MAX_CUSTOM_LEN]; |
| char proto_name[IFNAMSIZ]; |
| char *pname = proto_name; |
| char *p; |
| struct iw_event iwe; |
| int i, j; |
| u16 max_rate, rate; |
| static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; |
| |
| /* First entry *MUST* be the AP MAC address */ |
| iwe.cmd = SIOCGIWAP; |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; |
| memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN); |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_ADDR_LEN); |
| /* Remaining entries will be displayed in the order we provide them */ |
| |
| /* Add the ESSID */ |
| iwe.cmd = SIOCGIWESSID; |
| iwe.u.data.flags = 1; |
| // if (network->flags & NETWORK_EMPTY_ESSID) { |
| if (network->ssid_len == 0) { |
| iwe.u.data.length = sizeof("<hidden>"); |
| start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>"); |
| } else { |
| iwe.u.data.length = min(network->ssid_len, (u8)32); |
| start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid); |
| } |
| /* Add the protocol name */ |
| iwe.cmd = SIOCGIWNAME; |
| for (i = 0; i < ARRAY_SIZE(ieee80211_modes); i++) { |
| if (network->mode & BIT(i)) { |
| sprintf(pname, ieee80211_modes[i].mode_string, ieee80211_modes[i].mode_size); |
| pname += ieee80211_modes[i].mode_size; |
| } |
| } |
| *pname = '\0'; |
| snprintf(iwe.u.name, IFNAMSIZ, "IEEE802.11%s", proto_name); |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_CHAR_LEN); |
| /* Add mode */ |
| iwe.cmd = SIOCGIWMODE; |
| if (network->capability & |
| (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) { |
| if (network->capability & WLAN_CAPABILITY_BSS) |
| iwe.u.mode = IW_MODE_MASTER; |
| else |
| iwe.u.mode = IW_MODE_ADHOC; |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_UINT_LEN); |
| } |
| |
| /* Add frequency/channel */ |
| iwe.cmd = SIOCGIWFREQ; |
| /* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode); |
| iwe.u.freq.e = 3; */ |
| iwe.u.freq.m = network->channel; |
| iwe.u.freq.e = 0; |
| iwe.u.freq.i = 0; |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_FREQ_LEN); |
| /* Add encryption capability */ |
| iwe.cmd = SIOCGIWENCODE; |
| if (network->capability & WLAN_CAPABILITY_PRIVACY) |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; |
| else |
| iwe.u.data.flags = IW_ENCODE_DISABLED; |
| iwe.u.data.length = 0; |
| start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid); |
| /* Add basic and extended rates */ |
| max_rate = 0; |
| p = custom; |
| p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): "); |
| for (i = 0, j = 0; i < network->rates_len; ) { |
| if (j < network->rates_ex_len && |
| ((network->rates_ex[j] & 0x7F) < |
| (network->rates[i] & 0x7F))) |
| rate = network->rates_ex[j++] & 0x7F; |
| else |
| rate = network->rates[i++] & 0x7F; |
| if (rate > max_rate) |
| max_rate = rate; |
| p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), |
| "%d%s ", rate >> 1, (rate & 1) ? ".5" : ""); |
| } |
| for (; j < network->rates_ex_len; j++) { |
| rate = network->rates_ex[j] & 0x7F; |
| p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), |
| "%d%s ", rate >> 1, (rate & 1) ? ".5" : ""); |
| if (rate > max_rate) |
| max_rate = rate; |
| } |
| |
| if (network->mode >= IEEE_N_24G) /* add N rate here */ { |
| struct ht_capability_ele *ht_cap = NULL; |
| bool is40M = false, isShortGI = false; |
| u8 max_mcs = 0; |
| if (!memcmp(network->bssht.bdHTCapBuf, EWC11NHTCap, 4)) |
| ht_cap = (struct ht_capability_ele *)&network->bssht.bdHTCapBuf[4]; |
| else |
| ht_cap = (struct ht_capability_ele *)&network->bssht.bdHTCapBuf[0]; |
| is40M = (ht_cap->ChlWidth) ? 1 : 0; |
| isShortGI = (ht_cap->ChlWidth) ? |
| ((ht_cap->ShortGI40Mhz) ? 1 : 0) : |
| ((ht_cap->ShortGI20Mhz) ? 1 : 0); |
| |
| max_mcs = HTGetHighestMCSRate(ieee, ht_cap->MCS, MCS_FILTER_ALL); |
| rate = MCS_DATA_RATE[is40M][isShortGI][max_mcs & 0x7f]; |
| if (rate > max_rate) |
| max_rate = rate; |
| } |
| iwe.cmd = SIOCGIWRATE; |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; |
| iwe.u.bitrate.value = max_rate * 500000; |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, |
| IW_EV_PARAM_LEN); |
| iwe.cmd = IWEVCUSTOM; |
| iwe.u.data.length = p - custom; |
| if (iwe.u.data.length) |
| start = iwe_stream_add_point(info, start, stop, &iwe, custom); |
| /* Add quality statistics */ |
| /* TODO: Fix these values... */ |
| iwe.cmd = IWEVQUAL; |
| iwe.u.qual.qual = network->stats.signal; |
| iwe.u.qual.level = network->stats.rssi; |
| iwe.u.qual.noise = network->stats.noise; |
| iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK; |
| if (!(network->stats.mask & IEEE80211_STATMASK_RSSI)) |
| iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID; |
| if (!(network->stats.mask & IEEE80211_STATMASK_NOISE)) |
| iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID; |
| if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL)) |
| iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID; |
| iwe.u.qual.updated = 7; |
| start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_QUAL_LEN); |
| iwe.cmd = IWEVCUSTOM; |
| p = custom; |
| |
| iwe.u.data.length = p - custom; |
| if (iwe.u.data.length) |
| start = iwe_stream_add_point(info, start, stop, &iwe, custom); |
| |
| if (ieee->wpa_enabled && network->wpa_ie_len) { |
| char buf[MAX_WPA_IE_LEN * 2 + 30]; |
| // printk("WPA IE\n"); |
| u8 *p = buf; |
| p += sprintf(p, "wpa_ie="); |
| for (i = 0; i < network->wpa_ie_len; i++) { |
| p += sprintf(p, "%02x", network->wpa_ie[i]); |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| iwe.u.data.length = strlen(buf); |
| start = iwe_stream_add_point(info, start, stop, &iwe, buf); |
| } |
| |
| if (ieee->wpa_enabled && network->rsn_ie_len) { |
| char buf[MAX_WPA_IE_LEN * 2 + 30]; |
| |
| u8 *p = buf; |
| p += sprintf(p, "rsn_ie="); |
| for (i = 0; i < network->rsn_ie_len; i++) { |
| p += sprintf(p, "%02x", network->rsn_ie[i]); |
| } |
| |
| memset(&iwe, 0, sizeof(iwe)); |
| iwe.cmd = IWEVCUSTOM; |
| iwe.u.data.length = strlen(buf); |
| start = iwe_stream_add_point(info, start, stop, &iwe, buf); |
| } |
| |
| |
| /* Add EXTRA: Age to display seconds since last beacon/probe response |
| * for given network. */ |
| iwe.cmd = IWEVCUSTOM; |
| p = custom; |
| p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), |
| " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100)); |
| iwe.u.data.length = p - custom; |
| if (iwe.u.data.length) |
| start = iwe_stream_add_point(info, start, stop, &iwe, custom); |
| |
| return start; |
| } |
| |
| int ieee80211_wx_get_scan(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct ieee80211_network *network; |
| unsigned long flags; |
| |
| char *ev = extra; |
| // char *stop = ev + IW_SCAN_MAX_DATA; |
| char *stop = ev + wrqu->data.length;//IW_SCAN_MAX_DATA; |
| //char *stop = ev + IW_SCAN_MAX_DATA; |
| int i = 0; |
| int err = 0; |
| IEEE80211_DEBUG_WX("Getting scan\n"); |
| mutex_lock(&ieee->wx_mutex); |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| list_for_each_entry(network, &ieee->network_list, list) { |
| i++; |
| if ((stop - ev) < 200) { |
| err = -E2BIG; |
| break; |
| } |
| if (ieee->scan_age == 0 || |
| time_after(network->last_scanned + ieee->scan_age, jiffies)) |
| ev = rtl819x_translate_scan(ieee, ev, stop, network, info); |
| else |
| IEEE80211_DEBUG_SCAN( |
| "Not showing network '%s (" |
| "%pM)' due to age (%lums).\n", |
| escape_essid(network->ssid, |
| network->ssid_len), |
| network->bssid, |
| (jiffies - network->last_scanned) / (HZ / 100)); |
| } |
| |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| mutex_unlock(&ieee->wx_mutex); |
| wrqu->data.length = ev - extra; |
| wrqu->data.flags = 0; |
| |
| IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i); |
| |
| return err; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_get_scan); |
| |
| int ieee80211_wx_set_encode(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *keybuf) |
| { |
| struct iw_point *erq = &(wrqu->encoding); |
| struct net_device *dev = ieee->dev; |
| struct ieee80211_security sec = { |
| .flags = 0 |
| }; |
| int i, key, key_provided, len; |
| struct ieee80211_crypt_data **crypt; |
| |
| IEEE80211_DEBUG_WX("SET_ENCODE\n"); |
| |
| key = erq->flags & IW_ENCODE_INDEX; |
| if (key) { |
| if (key > WEP_KEYS) |
| return -EINVAL; |
| key--; |
| key_provided = 1; |
| } else { |
| key_provided = 0; |
| key = ieee->tx_keyidx; |
| } |
| |
| IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ? |
| "provided" : "default"); |
| crypt = &ieee->crypt[key]; |
| |
| if (erq->flags & IW_ENCODE_DISABLED) { |
| if (key_provided && *crypt) { |
| IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n", |
| key); |
| ieee80211_crypt_delayed_deinit(ieee, crypt); |
| } else |
| IEEE80211_DEBUG_WX("Disabling encryption.\n"); |
| |
| /* Check all the keys to see if any are still configured, |
| * and if no key index was provided, de-init them all */ |
| for (i = 0; i < WEP_KEYS; i++) { |
| if (ieee->crypt[i]) { |
| if (key_provided) |
| break; |
| ieee80211_crypt_delayed_deinit( |
| ieee, &ieee->crypt[i]); |
| } |
| } |
| |
| if (i == WEP_KEYS) { |
| sec.enabled = 0; |
| sec.level = SEC_LEVEL_0; |
| sec.flags |= SEC_ENABLED | SEC_LEVEL; |
| } |
| |
| goto done; |
| } |
| |
| |
| |
| sec.enabled = 1; |
| sec.flags |= SEC_ENABLED; |
| |
| if (*crypt && (*crypt)->ops && |
| strcmp((*crypt)->ops->name, "WEP") != 0) { |
| /* changing to use WEP; deinit previously used algorithm |
| * on this key */ |
| ieee80211_crypt_delayed_deinit(ieee, crypt); |
| } |
| |
| if (!*crypt) { |
| struct ieee80211_crypt_data *new_crypt; |
| |
| /* take WEP into use */ |
| new_crypt = kzalloc(sizeof(struct ieee80211_crypt_data), |
| GFP_KERNEL); |
| if (!new_crypt) |
| return -ENOMEM; |
| new_crypt->ops = try_then_request_module(ieee80211_get_crypto_ops("WEP"), |
| "ieee80211_crypt_wep"); |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) |
| new_crypt->priv = new_crypt->ops->init(key); |
| |
| if (!new_crypt->ops || !new_crypt->priv) { |
| kfree(new_crypt); |
| new_crypt = NULL; |
| |
| printk(KERN_WARNING "%s: could not initialize WEP: " |
| "load module ieee80211_crypt_wep\n", |
| dev->name); |
| return -EOPNOTSUPP; |
| } |
| *crypt = new_crypt; |
| } |
| |
| /* If a new key was provided, set it up */ |
| if (erq->length > 0) { |
| len = erq->length <= 5 ? 5 : 13; |
| memcpy(sec.keys[key], keybuf, erq->length); |
| if (len > erq->length) |
| memset(sec.keys[key] + erq->length, 0, |
| len - erq->length); |
| IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n", |
| key, escape_essid(sec.keys[key], len), |
| erq->length, len); |
| sec.key_sizes[key] = len; |
| (*crypt)->ops->set_key(sec.keys[key], len, NULL, |
| (*crypt)->priv); |
| sec.flags |= BIT(key); |
| /* This ensures a key will be activated if no key is |
| * explicitly set |
| */ |
| if (key == sec.active_key) |
| sec.flags |= SEC_ACTIVE_KEY; |
| ieee->tx_keyidx = key; |
| |
| } else { |
| len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN, |
| NULL, (*crypt)->priv); |
| if (len == 0) { |
| /* Set a default key of all 0 */ |
| printk("Setting key %d to all zero.\n", |
| key); |
| |
| IEEE80211_DEBUG_WX("Setting key %d to all zero.\n", |
| key); |
| memset(sec.keys[key], 0, 13); |
| (*crypt)->ops->set_key(sec.keys[key], 13, NULL, |
| (*crypt)->priv); |
| sec.key_sizes[key] = 13; |
| sec.flags |= BIT(key); |
| } |
| |
| /* No key data - just set the default TX key index */ |
| if (key_provided) { |
| IEEE80211_DEBUG_WX( |
| "Setting key %d to default Tx key.\n", key); |
| ieee->tx_keyidx = key; |
| sec.active_key = key; |
| sec.flags |= SEC_ACTIVE_KEY; |
| } |
| } |
| |
| done: |
| ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED); |
| ieee->auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY; |
| sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY; |
| sec.flags |= SEC_AUTH_MODE; |
| IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ? |
| "OPEN" : "SHARED KEY"); |
| |
| /* For now we just support WEP, so only set that security level... |
| * TODO: When WPA is added this is one place that needs to change */ |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */ |
| |
| if (ieee->set_security) |
| ieee->set_security(dev, &sec); |
| |
| /* Do not reset port if card is in Managed mode since resetting will |
| * generate new IEEE 802.11 authentication which may end up in looping |
| * with IEEE 802.1X. If your hardware requires a reset after WEP |
| * configuration (for example... Prism2), implement the reset_port in |
| * the callbacks structures used to initialize the 802.11 stack. */ |
| if (ieee->reset_on_keychange && |
| ieee->iw_mode != IW_MODE_INFRA && |
| ieee->reset_port && ieee->reset_port(dev)) { |
| printk(KERN_DEBUG "%s: reset_port failed\n", dev->name); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_set_encode); |
| |
| int ieee80211_wx_get_encode(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *keybuf) |
| { |
| struct iw_point *erq = &(wrqu->encoding); |
| int len, key; |
| struct ieee80211_crypt_data *crypt; |
| |
| IEEE80211_DEBUG_WX("GET_ENCODE\n"); |
| |
| if (ieee->iw_mode == IW_MODE_MONITOR) |
| return -1; |
| |
| key = erq->flags & IW_ENCODE_INDEX; |
| if (key) { |
| if (key > WEP_KEYS) |
| return -EINVAL; |
| key--; |
| } else |
| key = ieee->tx_keyidx; |
| |
| crypt = ieee->crypt[key]; |
| erq->flags = key + 1; |
| |
| if (!crypt || !crypt->ops) { |
| erq->length = 0; |
| erq->flags |= IW_ENCODE_DISABLED; |
| return 0; |
| } |
| len = crypt->ops->get_key(keybuf, SCM_KEY_LEN, NULL, crypt->priv); |
| erq->length = (len >= 0 ? len : 0); |
| |
| erq->flags |= IW_ENCODE_ENABLED; |
| |
| if (ieee->open_wep) |
| erq->flags |= IW_ENCODE_OPEN; |
| else |
| erq->flags |= IW_ENCODE_RESTRICTED; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_get_encode); |
| |
| int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| int ret = 0; |
| struct net_device *dev = ieee->dev; |
| struct iw_point *encoding = &wrqu->encoding; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; |
| int i, idx; |
| int group_key = 0; |
| const char *alg, *module; |
| struct ieee80211_crypto_ops *ops; |
| struct ieee80211_crypt_data **crypt; |
| |
| struct ieee80211_security sec = { |
| .flags = 0, |
| }; |
| idx = encoding->flags & IW_ENCODE_INDEX; |
| if (idx) { |
| if (idx < 1 || idx > WEP_KEYS) |
| return -EINVAL; |
| idx--; |
| } else |
| idx = ieee->tx_keyidx; |
| |
| if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { |
| |
| crypt = &ieee->crypt[idx]; |
| |
| group_key = 1; |
| } else { |
| /* some Cisco APs use idx>0 for unicast in dynamic WEP */ |
| if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP) |
| return -EINVAL; |
| if (ieee->iw_mode == IW_MODE_INFRA) |
| |
| crypt = &ieee->crypt[idx]; |
| |
| else |
| return -EINVAL; |
| } |
| |
| sec.flags |= SEC_ENABLED;// | SEC_ENCRYPT; |
| if ((encoding->flags & IW_ENCODE_DISABLED) || |
| ext->alg == IW_ENCODE_ALG_NONE) { |
| if (*crypt) |
| ieee80211_crypt_delayed_deinit(ieee, crypt); |
| |
| for (i = 0; i < WEP_KEYS; i++) |
| |
| if (ieee->crypt[i]) |
| |
| break; |
| |
| if (i == WEP_KEYS) { |
| sec.enabled = 0; |
| // sec.encrypt = 0; |
| sec.level = SEC_LEVEL_0; |
| sec.flags |= SEC_LEVEL; |
| } |
| goto done; |
| } |
| |
| sec.enabled = 1; |
| // sec.encrypt = 1; |
| switch (ext->alg) { |
| case IW_ENCODE_ALG_WEP: |
| alg = "WEP"; |
| module = "ieee80211_crypt_wep"; |
| break; |
| case IW_ENCODE_ALG_TKIP: |
| alg = "TKIP"; |
| module = "ieee80211_crypt_tkip"; |
| break; |
| case IW_ENCODE_ALG_CCMP: |
| alg = "CCMP"; |
| module = "ieee80211_crypt_ccmp"; |
| break; |
| default: |
| IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", |
| dev->name, ext->alg); |
| ret = -EINVAL; |
| goto done; |
| } |
| printk("alg name:%s\n", alg); |
| |
| ops = try_then_request_module(ieee80211_get_crypto_ops(alg), module); |
| if (!ops) { |
| IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", |
| dev->name, ext->alg); |
| printk("========>unknown crypto alg %d\n", ext->alg); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (!*crypt || (*crypt)->ops != ops) { |
| struct ieee80211_crypt_data *new_crypt; |
| |
| ieee80211_crypt_delayed_deinit(ieee, crypt); |
| |
| new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL); |
| if (!new_crypt) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| new_crypt->ops = ops; |
| if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) |
| new_crypt->priv = new_crypt->ops->init(idx); |
| if (!new_crypt->priv) { |
| kfree(new_crypt); |
| ret = -EINVAL; |
| goto done; |
| } |
| *crypt = new_crypt; |
| } |
| |
| if (ext->key_len > 0 && (*crypt)->ops->set_key && |
| (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq, |
| (*crypt)->priv) < 0) { |
| IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name); |
| printk("key setting failed\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| //skip_host_crypt: |
| if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { |
| ieee->tx_keyidx = idx; |
| sec.active_key = idx; |
| sec.flags |= SEC_ACTIVE_KEY; |
| } |
| |
| if (ext->alg != IW_ENCODE_ALG_NONE) { |
| //memcpy(sec.keys[idx], ext->key, ext->key_len); |
| sec.key_sizes[idx] = ext->key_len; |
| sec.flags |= BIT(idx); |
| if (ext->alg == IW_ENCODE_ALG_WEP) { |
| // sec.encode_alg[idx] = SEC_ALG_WEP; |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_1; |
| } else if (ext->alg == IW_ENCODE_ALG_TKIP) { |
| // sec.encode_alg[idx] = SEC_ALG_TKIP; |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_2; |
| } else if (ext->alg == IW_ENCODE_ALG_CCMP) { |
| // sec.encode_alg[idx] = SEC_ALG_CCMP; |
| sec.flags |= SEC_LEVEL; |
| sec.level = SEC_LEVEL_3; |
| } |
| /* Don't set sec level for group keys. */ |
| if (group_key) |
| sec.flags &= ~SEC_LEVEL; |
| } |
| done: |
| if (ieee->set_security) |
| ieee->set_security(ieee->dev, &sec); |
| |
| if (ieee->reset_on_keychange && |
| ieee->iw_mode != IW_MODE_INFRA && |
| ieee->reset_port && ieee->reset_port(dev)) { |
| IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name); |
| return -EINVAL; |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_set_encode_ext); |
| |
| int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct iw_point *encoding = &wrqu->encoding; |
| struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; |
| struct ieee80211_crypt_data *crypt; |
| int idx, max_key_len; |
| |
| max_key_len = encoding->length - sizeof(*ext); |
| if (max_key_len < 0) |
| return -EINVAL; |
| |
| idx = encoding->flags & IW_ENCODE_INDEX; |
| if (idx) { |
| if (idx < 1 || idx > WEP_KEYS) |
| return -EINVAL; |
| idx--; |
| } else |
| idx = ieee->tx_keyidx; |
| |
| if (!(ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) && |
| ext->alg != IW_ENCODE_ALG_WEP) |
| if (idx != 0 || ieee->iw_mode != IW_MODE_INFRA) |
| return -EINVAL; |
| |
| crypt = ieee->crypt[idx]; |
| encoding->flags = idx + 1; |
| memset(ext, 0, sizeof(*ext)); |
| |
| if (!crypt || !crypt->ops) { |
| ext->alg = IW_ENCODE_ALG_NONE; |
| ext->key_len = 0; |
| encoding->flags |= IW_ENCODE_DISABLED; |
| } else { |
| if (strcmp(crypt->ops->name, "WEP") == 0) |
| ext->alg = IW_ENCODE_ALG_WEP; |
| else if (strcmp(crypt->ops->name, "TKIP")) |
| ext->alg = IW_ENCODE_ALG_TKIP; |
| else if (strcmp(crypt->ops->name, "CCMP")) |
| ext->alg = IW_ENCODE_ALG_CCMP; |
| else |
| return -EINVAL; |
| ext->key_len = crypt->ops->get_key(ext->key, SCM_KEY_LEN, NULL, crypt->priv); |
| encoding->flags |= IW_ENCODE_ENABLED; |
| if (ext->key_len && |
| (ext->alg == IW_ENCODE_ALG_TKIP || |
| ext->alg == IW_ENCODE_ALG_CCMP)) |
| ext->ext_flags |= IW_ENCODE_EXT_TX_SEQ_VALID; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_get_encode_ext); |
| |
| int ieee80211_wx_set_mlme(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| struct iw_mlme *mlme = (struct iw_mlme *)extra; |
| switch (mlme->cmd) { |
| case IW_MLME_DEAUTH: |
| case IW_MLME_DISASSOC: |
| ieee80211_disassociate(ieee); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_set_mlme); |
| |
| int ieee80211_wx_set_auth(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| struct iw_param *data, char *extra) |
| { |
| switch (data->flags & IW_AUTH_INDEX) { |
| case IW_AUTH_WPA_VERSION: |
| /*need to support wpa2 here*/ |
| break; |
| case IW_AUTH_CIPHER_PAIRWISE: |
| case IW_AUTH_CIPHER_GROUP: |
| case IW_AUTH_KEY_MGMT: |
| /* |
| * * Host AP driver does not use these parameters and allows |
| * * wpa_supplicant to control them internally. |
| * */ |
| break; |
| case IW_AUTH_TKIP_COUNTERMEASURES: |
| ieee->tkip_countermeasures = data->value; |
| break; |
| case IW_AUTH_DROP_UNENCRYPTED: |
| ieee->drop_unencrypted = data->value; |
| break; |
| |
| case IW_AUTH_80211_AUTH_ALG: |
| //printk("======>%s():data->value is %d\n",__func__,data->value); |
| // ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM)?1:0; |
| if (data->value & IW_AUTH_ALG_SHARED_KEY) { |
| ieee->open_wep = 0; |
| ieee->auth_mode = 1; |
| } else if (data->value & IW_AUTH_ALG_OPEN_SYSTEM) { |
| ieee->open_wep = 1; |
| ieee->auth_mode = 0; |
| } else if (data->value & IW_AUTH_ALG_LEAP) { |
| ieee->open_wep = 1; |
| ieee->auth_mode = 2; |
| } else |
| return -EINVAL; |
| break; |
| |
| case IW_AUTH_WPA_ENABLED: |
| ieee->wpa_enabled = (data->value) ? 1 : 0; |
| break; |
| |
| case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
| ieee->ieee802_1x = data->value; |
| break; |
| case IW_AUTH_PRIVACY_INVOKED: |
| ieee->privacy_invoked = data->value; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_set_auth); |
| |
| int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len) |
| { |
| u8 *buf; |
| |
| if (len > MAX_WPA_IE_LEN || (len && !ie)) { |
| //printk("return error out, len:%d\n", len); |
| return -EINVAL; |
| } |
| |
| |
| if (len) { |
| if (len != ie[1] + 2) { |
| printk("len:%zu, ie:%d\n", len, ie[1]); |
| return -EINVAL; |
| } |
| buf = kmemdup(ie, len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| kfree(ieee->wpa_ie); |
| ieee->wpa_ie = buf; |
| ieee->wpa_ie_len = len; |
| } else { |
| kfree(ieee->wpa_ie); |
| ieee->wpa_ie = NULL; |
| ieee->wpa_ie_len = 0; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ieee80211_wx_set_gen_ie); |