| // SPDX-License-Identifier: GPL-2.0 |
| /* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch |
| * |
| * This is a sparsely documented chip, the only viable documentation seems |
| * to be a patched up code drop from the vendor that appear in various |
| * GPL source trees. |
| * |
| * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> |
| * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> |
| * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> |
| * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> |
| * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/etherdevice.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqdomain.h> |
| #include <linux/irqchip/chained_irq.h> |
| #include <linux/of_irq.h> |
| #include <linux/regmap.h> |
| |
| #include "realtek-smi-core.h" |
| |
| #define RTL8366RB_PORT_NUM_CPU 5 |
| #define RTL8366RB_NUM_PORTS 6 |
| #define RTL8366RB_PHY_NO_MAX 4 |
| #define RTL8366RB_PHY_ADDR_MAX 31 |
| |
| /* Switch Global Configuration register */ |
| #define RTL8366RB_SGCR 0x0000 |
| #define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0) |
| #define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4) |
| #define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3) |
| #define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0) |
| #define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1) |
| #define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2) |
| #define RTL8366RB_SGCR_MAX_LENGTH_9216 RTL8366RB_SGCR_MAX_LENGTH(0x3) |
| #define RTL8366RB_SGCR_EN_VLAN BIT(13) |
| #define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14) |
| |
| /* Port Enable Control register */ |
| #define RTL8366RB_PECR 0x0001 |
| |
| /* Switch Security Control registers */ |
| #define RTL8366RB_SSCR0 0x0002 |
| #define RTL8366RB_SSCR1 0x0003 |
| #define RTL8366RB_SSCR2 0x0004 |
| #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) |
| |
| /* Port Mode Control registers */ |
| #define RTL8366RB_PMC0 0x0005 |
| #define RTL8366RB_PMC0_SPI BIT(0) |
| #define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1) |
| #define RTL8366RB_PMC0_PROBE BIT(2) |
| #define RTL8366RB_PMC0_DIS_BISR BIT(3) |
| #define RTL8366RB_PMC0_ADCTEST BIT(4) |
| #define RTL8366RB_PMC0_SRAM_DIAG BIT(5) |
| #define RTL8366RB_PMC0_EN_SCAN BIT(6) |
| #define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7 |
| #define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7) |
| #define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10 |
| #define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10) |
| #define RTL8366RB_PMC0_SDSMODE_SHIFT 13 |
| #define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13) |
| #define RTL8366RB_PMC1 0x0006 |
| |
| /* Port Mirror Control Register */ |
| #define RTL8366RB_PMCR 0x0007 |
| #define RTL8366RB_PMCR_SOURCE_PORT(a) (a) |
| #define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f |
| #define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4) |
| #define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0 |
| #define RTL8366RB_PMCR_MIRROR_RX BIT(8) |
| #define RTL8366RB_PMCR_MIRROR_TX BIT(9) |
| #define RTL8366RB_PMCR_MIRROR_SPC BIT(10) |
| #define RTL8366RB_PMCR_MIRROR_ISO BIT(11) |
| |
| /* bits 0..7 = port 0, bits 8..15 = port 1 */ |
| #define RTL8366RB_PAACR0 0x0010 |
| /* bits 0..7 = port 2, bits 8..15 = port 3 */ |
| #define RTL8366RB_PAACR1 0x0011 |
| /* bits 0..7 = port 4, bits 8..15 = port 5 */ |
| #define RTL8366RB_PAACR2 0x0012 |
| #define RTL8366RB_PAACR_SPEED_10M 0 |
| #define RTL8366RB_PAACR_SPEED_100M 1 |
| #define RTL8366RB_PAACR_SPEED_1000M 2 |
| #define RTL8366RB_PAACR_FULL_DUPLEX BIT(2) |
| #define RTL8366RB_PAACR_LINK_UP BIT(4) |
| #define RTL8366RB_PAACR_TX_PAUSE BIT(5) |
| #define RTL8366RB_PAACR_RX_PAUSE BIT(6) |
| #define RTL8366RB_PAACR_AN BIT(7) |
| |
| #define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ |
| RTL8366RB_PAACR_FULL_DUPLEX | \ |
| RTL8366RB_PAACR_LINK_UP | \ |
| RTL8366RB_PAACR_TX_PAUSE | \ |
| RTL8366RB_PAACR_RX_PAUSE) |
| |
| /* bits 0..7 = port 0, bits 8..15 = port 1 */ |
| #define RTL8366RB_PSTAT0 0x0014 |
| /* bits 0..7 = port 2, bits 8..15 = port 3 */ |
| #define RTL8366RB_PSTAT1 0x0015 |
| /* bits 0..7 = port 4, bits 8..15 = port 5 */ |
| #define RTL8366RB_PSTAT2 0x0016 |
| |
| #define RTL8366RB_POWER_SAVING_REG 0x0021 |
| |
| /* CPU port control reg */ |
| #define RTL8368RB_CPU_CTRL_REG 0x0061 |
| #define RTL8368RB_CPU_PORTS_MSK 0x00FF |
| /* Enables inserting custom tag length/type 0x8899 */ |
| #define RTL8368RB_CPU_INSTAG BIT(15) |
| |
| #define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ |
| #define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ |
| #define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */ |
| |
| #define RTL8366RB_RESET_CTRL_REG 0x0100 |
| #define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0) |
| #define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1) |
| |
| #define RTL8366RB_CHIP_ID_REG 0x0509 |
| #define RTL8366RB_CHIP_ID_8366 0x5937 |
| #define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A |
| #define RTL8366RB_CHIP_VERSION_MASK 0xf |
| |
| /* PHY registers control */ |
| #define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000 |
| #define RTL8366RB_PHY_CTRL_READ BIT(0) |
| #define RTL8366RB_PHY_CTRL_WRITE 0 |
| #define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001 |
| #define RTL8366RB_PHY_INT_BUSY BIT(0) |
| #define RTL8366RB_PHY_EXT_BUSY BIT(4) |
| #define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002 |
| #define RTL8366RB_PHY_EXT_CTRL_REG 0x8010 |
| #define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011 |
| #define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012 |
| |
| #define RTL8366RB_PHY_REG_MASK 0x1f |
| #define RTL8366RB_PHY_PAGE_OFFSET 5 |
| #define RTL8366RB_PHY_PAGE_MASK (0xf << 5) |
| #define RTL8366RB_PHY_NO_OFFSET 9 |
| #define RTL8366RB_PHY_NO_MASK (0x1f << 9) |
| |
| #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f |
| |
| /* LED control registers */ |
| #define RTL8366RB_LED_BLINKRATE_REG 0x0430 |
| #define RTL8366RB_LED_BLINKRATE_MASK 0x0007 |
| #define RTL8366RB_LED_BLINKRATE_28MS 0x0000 |
| #define RTL8366RB_LED_BLINKRATE_56MS 0x0001 |
| #define RTL8366RB_LED_BLINKRATE_84MS 0x0002 |
| #define RTL8366RB_LED_BLINKRATE_111MS 0x0003 |
| #define RTL8366RB_LED_BLINKRATE_222MS 0x0004 |
| #define RTL8366RB_LED_BLINKRATE_446MS 0x0005 |
| |
| #define RTL8366RB_LED_CTRL_REG 0x0431 |
| #define RTL8366RB_LED_OFF 0x0 |
| #define RTL8366RB_LED_DUP_COL 0x1 |
| #define RTL8366RB_LED_LINK_ACT 0x2 |
| #define RTL8366RB_LED_SPD1000 0x3 |
| #define RTL8366RB_LED_SPD100 0x4 |
| #define RTL8366RB_LED_SPD10 0x5 |
| #define RTL8366RB_LED_SPD1000_ACT 0x6 |
| #define RTL8366RB_LED_SPD100_ACT 0x7 |
| #define RTL8366RB_LED_SPD10_ACT 0x8 |
| #define RTL8366RB_LED_SPD100_10_ACT 0x9 |
| #define RTL8366RB_LED_FIBER 0xa |
| #define RTL8366RB_LED_AN_FAULT 0xb |
| #define RTL8366RB_LED_LINK_RX 0xc |
| #define RTL8366RB_LED_LINK_TX 0xd |
| #define RTL8366RB_LED_MASTER 0xe |
| #define RTL8366RB_LED_FORCE 0xf |
| #define RTL8366RB_LED_0_1_CTRL_REG 0x0432 |
| #define RTL8366RB_LED_1_OFFSET 6 |
| #define RTL8366RB_LED_2_3_CTRL_REG 0x0433 |
| #define RTL8366RB_LED_3_OFFSET 6 |
| |
| #define RTL8366RB_MIB_COUNT 33 |
| #define RTL8366RB_GLOBAL_MIB_COUNT 1 |
| #define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 |
| #define RTL8366RB_MIB_COUNTER_BASE 0x1000 |
| #define RTL8366RB_MIB_CTRL_REG 0x13F0 |
| #define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC |
| #define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0) |
| #define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1) |
| #define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p)) |
| #define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11) |
| |
| #define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063 |
| #define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \ |
| (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4) |
| #define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf |
| #define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4)) |
| |
| #define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C |
| #define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185 |
| |
| #define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180 |
| #define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01 |
| #define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01 |
| |
| #define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3) |
| |
| #define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014 |
| #define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003 |
| #define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004 |
| #define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010 |
| #define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020 |
| #define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040 |
| #define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 |
| |
| #define RTL8366RB_NUM_VLANS 16 |
| #define RTL8366RB_NUM_LEDGROUPS 4 |
| #define RTL8366RB_NUM_VIDS 4096 |
| #define RTL8366RB_PRIORITYMAX 7 |
| #define RTL8366RB_FIDMAX 7 |
| |
| #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */ |
| #define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */ |
| #define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */ |
| #define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */ |
| #define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */ |
| |
| #define RTL8366RB_PORT_CPU BIT(5) /* CPU port */ |
| |
| #define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \ |
| RTL8366RB_PORT_2 | \ |
| RTL8366RB_PORT_3 | \ |
| RTL8366RB_PORT_4 | \ |
| RTL8366RB_PORT_5 | \ |
| RTL8366RB_PORT_CPU) |
| |
| #define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \ |
| RTL8366RB_PORT_2 | \ |
| RTL8366RB_PORT_3 | \ |
| RTL8366RB_PORT_4 | \ |
| RTL8366RB_PORT_5) |
| |
| #define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \ |
| RTL8366RB_PORT_2 | \ |
| RTL8366RB_PORT_3 | \ |
| RTL8366RB_PORT_4) |
| |
| #define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU |
| |
| /* First configuration word per member config, VID and prio */ |
| #define RTL8366RB_VLAN_VID_MASK 0xfff |
| #define RTL8366RB_VLAN_PRIORITY_SHIFT 12 |
| #define RTL8366RB_VLAN_PRIORITY_MASK 0x7 |
| /* Second configuration word per member config, member and untagged */ |
| #define RTL8366RB_VLAN_UNTAG_SHIFT 8 |
| #define RTL8366RB_VLAN_UNTAG_MASK 0xff |
| #define RTL8366RB_VLAN_MEMBER_MASK 0xff |
| /* Third config word per member config, STAG currently unused */ |
| #define RTL8366RB_VLAN_STAG_MBR_MASK 0xff |
| #define RTL8366RB_VLAN_STAG_MBR_SHIFT 8 |
| #define RTL8366RB_VLAN_STAG_IDX_MASK 0x7 |
| #define RTL8366RB_VLAN_STAG_IDX_SHIFT 5 |
| #define RTL8366RB_VLAN_FID_MASK 0x7 |
| |
| /* Port ingress bandwidth control */ |
| #define RTL8366RB_IB_BASE 0x0200 |
| #define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum)) |
| #define RTL8366RB_IB_BDTH_MASK 0x3fff |
| #define RTL8366RB_IB_PREIFG BIT(14) |
| |
| /* Port egress bandwidth control */ |
| #define RTL8366RB_EB_BASE 0x02d1 |
| #define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum)) |
| #define RTL8366RB_EB_BDTH_MASK 0x3fff |
| #define RTL8366RB_EB_PREIFG_REG 0x02f8 |
| #define RTL8366RB_EB_PREIFG BIT(9) |
| |
| #define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */ |
| #define RTL8366RB_BDTH_UNIT 64 |
| #define RTL8366RB_BDTH_REG_DEFAULT 16383 |
| |
| /* QOS */ |
| #define RTL8366RB_QOS BIT(15) |
| /* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */ |
| #define RTL8366RB_QOS_DEFAULT_PREIFG 1 |
| |
| /* Interrupt handling */ |
| #define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440 |
| #define RTL8366RB_INTERRUPT_POLARITY BIT(0) |
| #define RTL8366RB_P4_RGMII_LED BIT(2) |
| #define RTL8366RB_INTERRUPT_MASK_REG 0x0441 |
| #define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0) |
| #define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8) |
| #define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9) |
| #define RTL8366RB_INTERRUPT_P4_FIBER BIT(12) |
| #define RTL8366RB_INTERRUPT_P4_UTP BIT(13) |
| #define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \ |
| RTL8366RB_INTERRUPT_ACLEXCEED | \ |
| RTL8366RB_INTERRUPT_STORMEXCEED | \ |
| RTL8366RB_INTERRUPT_P4_FIBER | \ |
| RTL8366RB_INTERRUPT_P4_UTP) |
| #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 |
| #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */ |
| |
| /* bits 0..5 enable force when cleared */ |
| #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 |
| |
| #define RTL8366RB_OAM_PARSER_REG 0x0F14 |
| #define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15 |
| |
| #define RTL8366RB_GREEN_FEATURE_REG 0x0F51 |
| #define RTL8366RB_GREEN_FEATURE_MSK 0x0007 |
| #define RTL8366RB_GREEN_FEATURE_TX BIT(0) |
| #define RTL8366RB_GREEN_FEATURE_RX BIT(2) |
| |
| static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { |
| { 0, 0, 4, "IfInOctets" }, |
| { 0, 4, 4, "EtherStatsOctets" }, |
| { 0, 8, 2, "EtherStatsUnderSizePkts" }, |
| { 0, 10, 2, "EtherFragments" }, |
| { 0, 12, 2, "EtherStatsPkts64Octets" }, |
| { 0, 14, 2, "EtherStatsPkts65to127Octets" }, |
| { 0, 16, 2, "EtherStatsPkts128to255Octets" }, |
| { 0, 18, 2, "EtherStatsPkts256to511Octets" }, |
| { 0, 20, 2, "EtherStatsPkts512to1023Octets" }, |
| { 0, 22, 2, "EtherStatsPkts1024to1518Octets" }, |
| { 0, 24, 2, "EtherOversizeStats" }, |
| { 0, 26, 2, "EtherStatsJabbers" }, |
| { 0, 28, 2, "IfInUcastPkts" }, |
| { 0, 30, 2, "EtherStatsMulticastPkts" }, |
| { 0, 32, 2, "EtherStatsBroadcastPkts" }, |
| { 0, 34, 2, "EtherStatsDropEvents" }, |
| { 0, 36, 2, "Dot3StatsFCSErrors" }, |
| { 0, 38, 2, "Dot3StatsSymbolErrors" }, |
| { 0, 40, 2, "Dot3InPauseFrames" }, |
| { 0, 42, 2, "Dot3ControlInUnknownOpcodes" }, |
| { 0, 44, 4, "IfOutOctets" }, |
| { 0, 48, 2, "Dot3StatsSingleCollisionFrames" }, |
| { 0, 50, 2, "Dot3StatMultipleCollisionFrames" }, |
| { 0, 52, 2, "Dot3sDeferredTransmissions" }, |
| { 0, 54, 2, "Dot3StatsLateCollisions" }, |
| { 0, 56, 2, "EtherStatsCollisions" }, |
| { 0, 58, 2, "Dot3StatsExcessiveCollisions" }, |
| { 0, 60, 2, "Dot3OutPauseFrames" }, |
| { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" }, |
| { 0, 64, 2, "Dot1dTpPortInDiscards" }, |
| { 0, 66, 2, "IfOutUcastPkts" }, |
| { 0, 68, 2, "IfOutMulticastPkts" }, |
| { 0, 70, 2, "IfOutBroadcastPkts" }, |
| }; |
| |
| static int rtl8366rb_get_mib_counter(struct realtek_smi *smi, |
| int port, |
| struct rtl8366_mib_counter *mib, |
| u64 *mibvalue) |
| { |
| u32 addr, val; |
| int ret; |
| int i; |
| |
| addr = RTL8366RB_MIB_COUNTER_BASE + |
| RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) + |
| mib->offset; |
| |
| /* Writing access counter address first |
| * then ASIC will prepare 64bits counter wait for being retrived |
| */ |
| ret = regmap_write(smi->map, addr, 0); /* Write whatever */ |
| if (ret) |
| return ret; |
| |
| /* Read MIB control register */ |
| ret = regmap_read(smi->map, RTL8366RB_MIB_CTRL_REG, &val); |
| if (ret) |
| return -EIO; |
| |
| if (val & RTL8366RB_MIB_CTRL_BUSY_MASK) |
| return -EBUSY; |
| |
| if (val & RTL8366RB_MIB_CTRL_RESET_MASK) |
| return -EIO; |
| |
| /* Read each individual MIB 16 bits at the time */ |
| *mibvalue = 0; |
| for (i = mib->length; i > 0; i--) { |
| ret = regmap_read(smi->map, addr + (i - 1), &val); |
| if (ret) |
| return ret; |
| *mibvalue = (*mibvalue << 16) | (val & 0xFFFF); |
| } |
| return 0; |
| } |
| |
| static u32 rtl8366rb_get_irqmask(struct irq_data *d) |
| { |
| int line = irqd_to_hwirq(d); |
| u32 val; |
| |
| /* For line interrupts we combine link down in bits |
| * 6..11 with link up in bits 0..5 into one interrupt. |
| */ |
| if (line < 12) |
| val = BIT(line) | BIT(line + 6); |
| else |
| val = BIT(line); |
| return val; |
| } |
| |
| static void rtl8366rb_mask_irq(struct irq_data *d) |
| { |
| struct realtek_smi *smi = irq_data_get_irq_chip_data(d); |
| int ret; |
| |
| ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, |
| rtl8366rb_get_irqmask(d), 0); |
| if (ret) |
| dev_err(smi->dev, "could not mask IRQ\n"); |
| } |
| |
| static void rtl8366rb_unmask_irq(struct irq_data *d) |
| { |
| struct realtek_smi *smi = irq_data_get_irq_chip_data(d); |
| int ret; |
| |
| ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, |
| rtl8366rb_get_irqmask(d), |
| rtl8366rb_get_irqmask(d)); |
| if (ret) |
| dev_err(smi->dev, "could not unmask IRQ\n"); |
| } |
| |
| static irqreturn_t rtl8366rb_irq(int irq, void *data) |
| { |
| struct realtek_smi *smi = data; |
| u32 stat; |
| int ret; |
| |
| /* This clears the IRQ status register */ |
| ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, |
| &stat); |
| if (ret) { |
| dev_err(smi->dev, "can't read interrupt status\n"); |
| return IRQ_NONE; |
| } |
| stat &= RTL8366RB_INTERRUPT_VALID; |
| if (!stat) |
| return IRQ_NONE; |
| while (stat) { |
| int line = __ffs(stat); |
| int child_irq; |
| |
| stat &= ~BIT(line); |
| /* For line interrupts we combine link down in bits |
| * 6..11 with link up in bits 0..5 into one interrupt. |
| */ |
| if (line < 12 && line > 5) |
| line -= 5; |
| child_irq = irq_find_mapping(smi->irqdomain, line); |
| handle_nested_irq(child_irq); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| static struct irq_chip rtl8366rb_irq_chip = { |
| .name = "RTL8366RB", |
| .irq_mask = rtl8366rb_mask_irq, |
| .irq_unmask = rtl8366rb_unmask_irq, |
| }; |
| |
| static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_data(irq, domain->host_data); |
| irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq); |
| irq_set_nested_thread(irq, 1); |
| irq_set_noprobe(irq); |
| |
| return 0; |
| } |
| |
| static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq) |
| { |
| irq_set_nested_thread(irq, 0); |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| } |
| |
| static const struct irq_domain_ops rtl8366rb_irqdomain_ops = { |
| .map = rtl8366rb_irq_map, |
| .unmap = rtl8366rb_irq_unmap, |
| .xlate = irq_domain_xlate_onecell, |
| }; |
| |
| static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) |
| { |
| struct device_node *intc; |
| unsigned long irq_trig; |
| int irq; |
| int ret; |
| u32 val; |
| int i; |
| |
| intc = of_get_child_by_name(smi->dev->of_node, "interrupt-controller"); |
| if (!intc) { |
| dev_err(smi->dev, "missing child interrupt-controller node\n"); |
| return -EINVAL; |
| } |
| /* RB8366RB IRQs cascade off this one */ |
| irq = of_irq_get(intc, 0); |
| if (irq <= 0) { |
| dev_err(smi->dev, "failed to get parent IRQ\n"); |
| ret = irq ? irq : -EINVAL; |
| goto out_put_node; |
| } |
| |
| /* This clears the IRQ status register */ |
| ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, |
| &val); |
| if (ret) { |
| dev_err(smi->dev, "can't read interrupt status\n"); |
| goto out_put_node; |
| } |
| |
| /* Fetch IRQ edge information from the descriptor */ |
| irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); |
| switch (irq_trig) { |
| case IRQF_TRIGGER_RISING: |
| case IRQF_TRIGGER_HIGH: |
| dev_info(smi->dev, "active high/rising IRQ\n"); |
| val = 0; |
| break; |
| case IRQF_TRIGGER_FALLING: |
| case IRQF_TRIGGER_LOW: |
| dev_info(smi->dev, "active low/falling IRQ\n"); |
| val = RTL8366RB_INTERRUPT_POLARITY; |
| break; |
| } |
| ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_CONTROL_REG, |
| RTL8366RB_INTERRUPT_POLARITY, |
| val); |
| if (ret) { |
| dev_err(smi->dev, "could not configure IRQ polarity\n"); |
| goto out_put_node; |
| } |
| |
| ret = devm_request_threaded_irq(smi->dev, irq, NULL, |
| rtl8366rb_irq, IRQF_ONESHOT, |
| "RTL8366RB", smi); |
| if (ret) { |
| dev_err(smi->dev, "unable to request irq: %d\n", ret); |
| goto out_put_node; |
| } |
| smi->irqdomain = irq_domain_add_linear(intc, |
| RTL8366RB_NUM_INTERRUPT, |
| &rtl8366rb_irqdomain_ops, |
| smi); |
| if (!smi->irqdomain) { |
| dev_err(smi->dev, "failed to create IRQ domain\n"); |
| ret = -EINVAL; |
| goto out_put_node; |
| } |
| for (i = 0; i < smi->num_ports; i++) |
| irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq); |
| |
| out_put_node: |
| of_node_put(intc); |
| return ret; |
| } |
| |
| static int rtl8366rb_set_addr(struct realtek_smi *smi) |
| { |
| u8 addr[ETH_ALEN]; |
| u16 val; |
| int ret; |
| |
| eth_random_addr(addr); |
| |
| dev_info(smi->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", |
| addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); |
| val = addr[0] << 8 | addr[1]; |
| ret = regmap_write(smi->map, RTL8366RB_SMAR0, val); |
| if (ret) |
| return ret; |
| val = addr[2] << 8 | addr[3]; |
| ret = regmap_write(smi->map, RTL8366RB_SMAR1, val); |
| if (ret) |
| return ret; |
| val = addr[4] << 8 | addr[5]; |
| ret = regmap_write(smi->map, RTL8366RB_SMAR2, val); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* Found in a vendor driver */ |
| |
| /* For the "version 0" early silicon, appear in most source releases */ |
| static const u16 rtl8366rb_init_jam_ver_0[] = { |
| 0x000B, 0x0001, 0x03A6, 0x0100, 0x03A7, 0x0001, 0x02D1, 0x3FFF, |
| 0x02D2, 0x3FFF, 0x02D3, 0x3FFF, 0x02D4, 0x3FFF, 0x02D5, 0x3FFF, |
| 0x02D6, 0x3FFF, 0x02D7, 0x3FFF, 0x02D8, 0x3FFF, 0x022B, 0x0688, |
| 0x022C, 0x0FAC, 0x03D0, 0x4688, 0x03D1, 0x01F5, 0x0000, 0x0830, |
| 0x02F9, 0x0200, 0x02F7, 0x7FFF, 0x02F8, 0x03FF, 0x0080, 0x03E8, |
| 0x0081, 0x00CE, 0x0082, 0x00DA, 0x0083, 0x0230, 0xBE0F, 0x2000, |
| 0x0231, 0x422A, 0x0232, 0x422A, 0x0233, 0x422A, 0x0234, 0x422A, |
| 0x0235, 0x422A, 0x0236, 0x422A, 0x0237, 0x422A, 0x0238, 0x422A, |
| 0x0239, 0x422A, 0x023A, 0x422A, 0x023B, 0x422A, 0x023C, 0x422A, |
| 0x023D, 0x422A, 0x023E, 0x422A, 0x023F, 0x422A, 0x0240, 0x422A, |
| 0x0241, 0x422A, 0x0242, 0x422A, 0x0243, 0x422A, 0x0244, 0x422A, |
| 0x0245, 0x422A, 0x0246, 0x422A, 0x0247, 0x422A, 0x0248, 0x422A, |
| 0x0249, 0x0146, 0x024A, 0x0146, 0x024B, 0x0146, 0xBE03, 0xC961, |
| 0x024D, 0x0146, 0x024E, 0x0146, 0x024F, 0x0146, 0x0250, 0x0146, |
| 0xBE64, 0x0226, 0x0252, 0x0146, 0x0253, 0x0146, 0x024C, 0x0146, |
| 0x0251, 0x0146, 0x0254, 0x0146, 0xBE62, 0x3FD0, 0x0084, 0x0320, |
| 0x0255, 0x0146, 0x0256, 0x0146, 0x0257, 0x0146, 0x0258, 0x0146, |
| 0x0259, 0x0146, 0x025A, 0x0146, 0x025B, 0x0146, 0x025C, 0x0146, |
| 0x025D, 0x0146, 0x025E, 0x0146, 0x025F, 0x0146, 0x0260, 0x0146, |
| 0x0261, 0xA23F, 0x0262, 0x0294, 0x0263, 0xA23F, 0x0264, 0x0294, |
| 0x0265, 0xA23F, 0x0266, 0x0294, 0x0267, 0xA23F, 0x0268, 0x0294, |
| 0x0269, 0xA23F, 0x026A, 0x0294, 0x026B, 0xA23F, 0x026C, 0x0294, |
| 0x026D, 0xA23F, 0x026E, 0x0294, 0x026F, 0xA23F, 0x0270, 0x0294, |
| 0x02F5, 0x0048, 0xBE09, 0x0E00, 0xBE1E, 0x0FA0, 0xBE14, 0x8448, |
| 0xBE15, 0x1007, 0xBE4A, 0xA284, 0xC454, 0x3F0B, 0xC474, 0x3F0B, |
| 0xBE48, 0x3672, 0xBE4B, 0x17A7, 0xBE4C, 0x0B15, 0xBE52, 0x0EDD, |
| 0xBE49, 0x8C00, 0xBE5B, 0x785C, 0xBE5C, 0x785C, 0xBE5D, 0x785C, |
| 0xBE61, 0x368A, 0xBE63, 0x9B84, 0xC456, 0xCC13, 0xC476, 0xCC13, |
| 0xBE65, 0x307D, 0xBE6D, 0x0005, 0xBE6E, 0xE120, 0xBE2E, 0x7BAF, |
| }; |
| |
| /* This v1 init sequence is from Belkin F5D8235 U-Boot release */ |
| static const u16 rtl8366rb_init_jam_ver_1[] = { |
| 0x0000, 0x0830, 0x0001, 0x8000, 0x0400, 0x8130, 0xBE78, 0x3C3C, |
| 0x0431, 0x5432, 0xBE37, 0x0CE4, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, |
| 0xC44C, 0x1585, 0xC44C, 0x1185, 0xC44C, 0x1585, 0xC46C, 0x1585, |
| 0xC46C, 0x1185, 0xC46C, 0x1585, 0xC451, 0x2135, 0xC471, 0x2135, |
| 0xBE10, 0x8140, 0xBE15, 0x0007, 0xBE6E, 0xE120, 0xBE69, 0xD20F, |
| 0xBE6B, 0x0320, 0xBE24, 0xB000, 0xBE23, 0xFF51, 0xBE22, 0xDF20, |
| 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, 0xBE24, 0x0000, |
| 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, 0xBE21, 0x0140, |
| 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, 0xBE2E, 0x7B7A, |
| 0xBE36, 0x0CE4, 0x02F5, 0x0048, 0xBE77, 0x2940, 0x000A, 0x83E0, |
| 0xBE79, 0x3C3C, 0xBE00, 0x1340, |
| }; |
| |
| /* This v2 init sequence is from Belkin F5D8235 U-Boot release */ |
| static const u16 rtl8366rb_init_jam_ver_2[] = { |
| 0x0450, 0x0000, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432, |
| 0xC44F, 0x6250, 0xC46F, 0x6250, 0xC456, 0x0C14, 0xC476, 0x0C14, |
| 0xC44C, 0x1C85, 0xC44C, 0x1885, 0xC44C, 0x1C85, 0xC46C, 0x1C85, |
| 0xC46C, 0x1885, 0xC46C, 0x1C85, 0xC44C, 0x0885, 0xC44C, 0x0881, |
| 0xC44C, 0x0885, 0xC46C, 0x0885, 0xC46C, 0x0881, 0xC46C, 0x0885, |
| 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001, |
| 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6E, 0x0320, |
| 0xBE77, 0x2940, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120, |
| 0x8000, 0x0001, 0xBE15, 0x1007, 0x8000, 0x0000, 0xBE15, 0x1007, |
| 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, 0xBE10, 0x8140, |
| 0xBE00, 0x1340, 0x0F51, 0x0010, |
| }; |
| |
| /* Appears in a DDWRT code dump */ |
| static const u16 rtl8366rb_init_jam_ver_3[] = { |
| 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0431, 0x5432, |
| 0x0F51, 0x0017, 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, |
| 0xC456, 0x0C14, 0xC476, 0x0C14, 0xC454, 0x3F8B, 0xC474, 0x3F8B, |
| 0xC450, 0x2071, 0xC470, 0x2071, 0xC451, 0x226B, 0xC471, 0x226B, |
| 0xC452, 0xA293, 0xC472, 0xA293, 0xC44C, 0x1585, 0xC44C, 0x1185, |
| 0xC44C, 0x1585, 0xC46C, 0x1585, 0xC46C, 0x1185, 0xC46C, 0x1585, |
| 0xC44C, 0x0185, 0xC44C, 0x0181, 0xC44C, 0x0185, 0xC46C, 0x0185, |
| 0xC46C, 0x0181, 0xC46C, 0x0185, 0xBE24, 0xB000, 0xBE23, 0xFF51, |
| 0xBE22, 0xDF20, 0xBE21, 0x0140, 0xBE20, 0x00BB, 0xBE24, 0xB800, |
| 0xBE24, 0x0000, 0xBE24, 0x7000, 0xBE23, 0xFF51, 0xBE22, 0xDF60, |
| 0xBE21, 0x0140, 0xBE20, 0x0077, 0xBE24, 0x7800, 0xBE24, 0x0000, |
| 0xBE2E, 0x7BA7, 0xBE36, 0x1000, 0xBE37, 0x1000, 0x8000, 0x0001, |
| 0xBE69, 0xD50F, 0x8000, 0x0000, 0xBE69, 0xD50F, 0xBE6B, 0x0320, |
| 0xBE77, 0x2800, 0xBE78, 0x3C3C, 0xBE79, 0x3C3C, 0xBE6E, 0xE120, |
| 0x8000, 0x0001, 0xBE10, 0x8140, 0x8000, 0x0000, 0xBE10, 0x8140, |
| 0xBE15, 0x1007, 0xBE14, 0x0448, 0xBE1E, 0x00A0, 0xBE10, 0x8160, |
| 0xBE10, 0x8140, 0xBE00, 0x1340, 0x0450, 0x0000, 0x0401, 0x0000, |
| }; |
| |
| /* Belkin F5D8235 v1, "belkin,f5d8235-v1" */ |
| static const u16 rtl8366rb_init_jam_f5d8235[] = { |
| 0x0242, 0x02BF, 0x0245, 0x02BF, 0x0248, 0x02BF, 0x024B, 0x02BF, |
| 0x024E, 0x02BF, 0x0251, 0x02BF, 0x0254, 0x0A3F, 0x0256, 0x0A3F, |
| 0x0258, 0x0A3F, 0x025A, 0x0A3F, 0x025C, 0x0A3F, 0x025E, 0x0A3F, |
| 0x0263, 0x007C, 0x0100, 0x0004, 0xBE5B, 0x3500, 0x800E, 0x200F, |
| 0xBE1D, 0x0F00, 0x8001, 0x5011, 0x800A, 0xA2F4, 0x800B, 0x17A3, |
| 0xBE4B, 0x17A3, 0xBE41, 0x5011, 0xBE17, 0x2100, 0x8000, 0x8304, |
| 0xBE40, 0x8304, 0xBE4A, 0xA2F4, 0x800C, 0xA8D5, 0x8014, 0x5500, |
| 0x8015, 0x0004, 0xBE4C, 0xA8D5, 0xBE59, 0x0008, 0xBE09, 0x0E00, |
| 0xBE36, 0x1036, 0xBE37, 0x1036, 0x800D, 0x00FF, 0xBE4D, 0x00FF, |
| }; |
| |
| /* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */ |
| static const u16 rtl8366rb_init_jam_dgn3500[] = { |
| 0x0000, 0x0830, 0x0400, 0x8130, 0x000A, 0x83ED, 0x0F51, 0x0017, |
| 0x02F5, 0x0048, 0x02FA, 0xFFDF, 0x02FB, 0xFFE0, 0x0450, 0x0000, |
| 0x0401, 0x0000, 0x0431, 0x0960, |
| }; |
| |
| /* This jam table activates "green ethernet", which means low power mode |
| * and is claimed to detect the cable length and not use more power than |
| * necessary, and the ports should enter power saving mode 10 seconds after |
| * a cable is disconnected. Seems to always be the same. |
| */ |
| static const u16 rtl8366rb_green_jam[][2] = { |
| {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7}, |
| {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C}, |
| {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C}, |
| }; |
| |
| static int rtl8366rb_setup(struct dsa_switch *ds) |
| { |
| struct realtek_smi *smi = ds->priv; |
| const u16 *jam_table; |
| u32 chip_ver = 0; |
| u32 chip_id = 0; |
| int jam_size; |
| u32 val; |
| int ret; |
| int i; |
| |
| ret = regmap_read(smi->map, RTL8366RB_CHIP_ID_REG, &chip_id); |
| if (ret) { |
| dev_err(smi->dev, "unable to read chip id\n"); |
| return ret; |
| } |
| |
| switch (chip_id) { |
| case RTL8366RB_CHIP_ID_8366: |
| break; |
| default: |
| dev_err(smi->dev, "unknown chip id (%04x)\n", chip_id); |
| return -ENODEV; |
| } |
| |
| ret = regmap_read(smi->map, RTL8366RB_CHIP_VERSION_CTRL_REG, |
| &chip_ver); |
| if (ret) { |
| dev_err(smi->dev, "unable to read chip version\n"); |
| return ret; |
| } |
| |
| dev_info(smi->dev, "RTL%04x ver %u chip found\n", |
| chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK); |
| |
| /* Do the init dance using the right jam table */ |
| switch (chip_ver) { |
| case 0: |
| jam_table = rtl8366rb_init_jam_ver_0; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0); |
| break; |
| case 1: |
| jam_table = rtl8366rb_init_jam_ver_1; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1); |
| break; |
| case 2: |
| jam_table = rtl8366rb_init_jam_ver_2; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2); |
| break; |
| default: |
| jam_table = rtl8366rb_init_jam_ver_3; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3); |
| break; |
| } |
| |
| /* Special jam tables for special routers |
| * TODO: are these necessary? Maintainers, please test |
| * without them, using just the off-the-shelf tables. |
| */ |
| if (of_machine_is_compatible("belkin,f5d8235-v1")) { |
| jam_table = rtl8366rb_init_jam_f5d8235; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235); |
| } |
| if (of_machine_is_compatible("netgear,dgn3500") || |
| of_machine_is_compatible("netgear,dgn3500b")) { |
| jam_table = rtl8366rb_init_jam_dgn3500; |
| jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500); |
| } |
| |
| i = 0; |
| while (i < jam_size) { |
| if ((jam_table[i] & 0xBE00) == 0xBE00) { |
| ret = regmap_read(smi->map, |
| RTL8366RB_PHY_ACCESS_BUSY_REG, |
| &val); |
| if (ret) |
| return ret; |
| if (!(val & RTL8366RB_PHY_INT_BUSY)) { |
| ret = regmap_write(smi->map, |
| RTL8366RB_PHY_ACCESS_CTRL_REG, |
| RTL8366RB_PHY_CTRL_WRITE); |
| if (ret) |
| return ret; |
| } |
| } |
| dev_dbg(smi->dev, "jam %04x into register %04x\n", |
| jam_table[i + 1], |
| jam_table[i]); |
| ret = regmap_write(smi->map, |
| jam_table[i], |
| jam_table[i + 1]); |
| if (ret) |
| return ret; |
| i += 2; |
| } |
| |
| /* Set up the "green ethernet" feature */ |
| i = 0; |
| while (i < ARRAY_SIZE(rtl8366rb_green_jam)) { |
| ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_BUSY_REG, |
| &val); |
| if (ret) |
| return ret; |
| if (!(val & RTL8366RB_PHY_INT_BUSY)) { |
| ret = regmap_write(smi->map, |
| RTL8366RB_PHY_ACCESS_CTRL_REG, |
| RTL8366RB_PHY_CTRL_WRITE); |
| if (ret) |
| return ret; |
| ret = regmap_write(smi->map, |
| rtl8366rb_green_jam[i][0], |
| rtl8366rb_green_jam[i][1]); |
| if (ret) |
| return ret; |
| i++; |
| } |
| } |
| ret = regmap_write(smi->map, |
| RTL8366RB_GREEN_FEATURE_REG, |
| (chip_ver == 1) ? 0x0007 : 0x0003); |
| if (ret) |
| return ret; |
| |
| /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */ |
| ret = regmap_write(smi->map, 0x0c, 0x240); |
| if (ret) |
| return ret; |
| ret = regmap_write(smi->map, 0x0d, 0x240); |
| if (ret) |
| return ret; |
| |
| /* Set some random MAC address */ |
| ret = rtl8366rb_set_addr(smi); |
| if (ret) |
| return ret; |
| |
| /* Enable CPU port and enable inserting CPU tag |
| * |
| * Disabling RTL8368RB_CPU_INSTAG here will change the behaviour |
| * of the switch totally and it will start talking Realtek RRCP |
| * internally. It is probably possible to experiment with this, |
| * but then the kernel needs to understand and handle RRCP first. |
| */ |
| ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG, |
| 0xFFFF, |
| RTL8368RB_CPU_INSTAG | BIT(smi->cpu_port)); |
| if (ret) |
| return ret; |
| |
| /* Make sure we default-enable the fixed CPU port */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_PECR, |
| BIT(smi->cpu_port), |
| 0); |
| if (ret) |
| return ret; |
| |
| /* Set maximum packet length to 1536 bytes */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_SGCR, |
| RTL8366RB_SGCR_MAX_LENGTH_MASK, |
| RTL8366RB_SGCR_MAX_LENGTH_1536); |
| if (ret) |
| return ret; |
| |
| /* Enable learning for all ports */ |
| ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0); |
| if (ret) |
| return ret; |
| |
| /* Enable auto ageing for all ports */ |
| ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0); |
| if (ret) |
| return ret; |
| |
| /* Port 4 setup: this enables Port 4, usually the WAN port, |
| * common PHY IO mode is apparently mode 0, and this is not what |
| * the port is initialized to. There is no explanation of the |
| * IO modes in the Realtek source code, if your WAN port is |
| * connected to something exotic such as fiber, then this might |
| * be worth experimenting with. |
| */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_PMC0, |
| RTL8366RB_PMC0_P4_IOMODE_MASK, |
| 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT); |
| if (ret) |
| return ret; |
| |
| /* Discard VLAN tagged packets if the port is not a member of |
| * the VLAN with which the packets is associated. |
| */ |
| ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, |
| RTL8366RB_PORT_ALL); |
| if (ret) |
| return ret; |
| |
| /* Don't drop packets whose DA has not been learned */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_SSCR2, |
| RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0); |
| if (ret) |
| return ret; |
| |
| /* Set blinking, TODO: make this configurable */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_LED_BLINKRATE_REG, |
| RTL8366RB_LED_BLINKRATE_MASK, |
| RTL8366RB_LED_BLINKRATE_56MS); |
| if (ret) |
| return ret; |
| |
| /* Set up LED activity: |
| * Each port has 4 LEDs, we configure all ports to the same |
| * behaviour (no individual config) but we can set up each |
| * LED separately. |
| */ |
| if (smi->leds_disabled) { |
| /* Turn everything off */ |
| regmap_update_bits(smi->map, |
| RTL8366RB_LED_0_1_CTRL_REG, |
| 0x0FFF, 0); |
| regmap_update_bits(smi->map, |
| RTL8366RB_LED_2_3_CTRL_REG, |
| 0x0FFF, 0); |
| regmap_update_bits(smi->map, |
| RTL8366RB_INTERRUPT_CONTROL_REG, |
| RTL8366RB_P4_RGMII_LED, |
| 0); |
| val = RTL8366RB_LED_OFF; |
| } else { |
| /* TODO: make this configurable per LED */ |
| val = RTL8366RB_LED_FORCE; |
| } |
| for (i = 0; i < 4; i++) { |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_LED_CTRL_REG, |
| 0xf << (i * 4), |
| val << (i * 4)); |
| if (ret) |
| return ret; |
| } |
| |
| ret = rtl8366_init_vlan(smi); |
| if (ret) |
| return ret; |
| |
| ret = rtl8366rb_setup_cascaded_irq(smi); |
| if (ret) |
| dev_info(smi->dev, "no interrupt support\n"); |
| |
| ret = realtek_smi_setup_mdio(smi); |
| if (ret) { |
| dev_info(smi->dev, "could not set up MDIO bus\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, |
| int port) |
| { |
| /* For now, the RTL switches are handled without any custom tags. |
| * |
| * It is possible to turn on "custom tags" by removing the |
| * RTL8368RB_CPU_INSTAG flag when enabling the port but what it |
| * does is unfamiliar to DSA: ethernet frames of type 8899, the Realtek |
| * Remote Control Protocol (RRCP) start to appear on the CPU port of |
| * the device. So this is not the ordinary few extra bytes in the |
| * frame. Instead it appears that the switch starts to talk Realtek |
| * RRCP internally which means a pretty complex RRCP implementation |
| * decoding and responding the RRCP protocol is needed to exploit this. |
| * |
| * The OpenRRCP project (dormant since 2009) have reverse-egineered |
| * parts of the protocol. |
| */ |
| return DSA_TAG_PROTO_NONE; |
| } |
| |
| static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port, |
| struct phy_device *phydev) |
| { |
| struct realtek_smi *smi = ds->priv; |
| int ret; |
| |
| if (port != smi->cpu_port) |
| return; |
| |
| dev_info(smi->dev, "adjust link on CPU port (%d)\n", port); |
| |
| /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG, |
| BIT(port), BIT(port)); |
| if (ret) |
| return; |
| |
| ret = regmap_update_bits(smi->map, RTL8366RB_PAACR2, |
| 0xFF00U, |
| RTL8366RB_PAACR_CPU_PORT << 8); |
| if (ret) |
| return; |
| |
| /* Enable the CPU port */ |
| ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), |
| 0); |
| if (ret) |
| return; |
| } |
| |
| static void rb8366rb_set_port_led(struct realtek_smi *smi, |
| int port, bool enable) |
| { |
| u16 val = enable ? 0x3f : 0; |
| int ret; |
| |
| if (smi->leds_disabled) |
| return; |
| |
| switch (port) { |
| case 0: |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_LED_0_1_CTRL_REG, |
| 0x3F, val); |
| break; |
| case 1: |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_LED_0_1_CTRL_REG, |
| 0x3F << RTL8366RB_LED_1_OFFSET, |
| val << RTL8366RB_LED_1_OFFSET); |
| break; |
| case 2: |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_LED_2_3_CTRL_REG, |
| 0x3F, val); |
| break; |
| case 3: |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_LED_2_3_CTRL_REG, |
| 0x3F << RTL8366RB_LED_3_OFFSET, |
| val << RTL8366RB_LED_3_OFFSET); |
| break; |
| case 4: |
| ret = regmap_update_bits(smi->map, |
| RTL8366RB_INTERRUPT_CONTROL_REG, |
| RTL8366RB_P4_RGMII_LED, |
| enable ? RTL8366RB_P4_RGMII_LED : 0); |
| break; |
| default: |
| dev_err(smi->dev, "no LED for port %d\n", port); |
| return; |
| } |
| if (ret) |
| dev_err(smi->dev, "error updating LED on port %d\n", port); |
| } |
| |
| static int |
| rtl8366rb_port_enable(struct dsa_switch *ds, int port, |
| struct phy_device *phy) |
| { |
| struct realtek_smi *smi = ds->priv; |
| int ret; |
| |
| dev_dbg(smi->dev, "enable port %d\n", port); |
| ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), |
| 0); |
| if (ret) |
| return ret; |
| |
| rb8366rb_set_port_led(smi, port, true); |
| return 0; |
| } |
| |
| static void |
| rtl8366rb_port_disable(struct dsa_switch *ds, int port) |
| { |
| struct realtek_smi *smi = ds->priv; |
| int ret; |
| |
| dev_dbg(smi->dev, "disable port %d\n", port); |
| ret = regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), |
| BIT(port)); |
| if (ret) |
| return; |
| |
| rb8366rb_set_port_led(smi, port, false); |
| } |
| |
| static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid, |
| struct rtl8366_vlan_4k *vlan4k) |
| { |
| u32 data[3]; |
| int ret; |
| int i; |
| |
| memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k)); |
| |
| if (vid >= RTL8366RB_NUM_VIDS) |
| return -EINVAL; |
| |
| /* write VID */ |
| ret = regmap_write(smi->map, RTL8366RB_VLAN_TABLE_WRITE_BASE, |
| vid & RTL8366RB_VLAN_VID_MASK); |
| if (ret) |
| return ret; |
| |
| /* write table access control word */ |
| ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, |
| RTL8366RB_TABLE_VLAN_READ_CTRL); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < 3; i++) { |
| ret = regmap_read(smi->map, |
| RTL8366RB_VLAN_TABLE_READ_BASE + i, |
| &data[i]); |
| if (ret) |
| return ret; |
| } |
| |
| vlan4k->vid = vid; |
| vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & |
| RTL8366RB_VLAN_UNTAG_MASK; |
| vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; |
| vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK; |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_set_vlan_4k(struct realtek_smi *smi, |
| const struct rtl8366_vlan_4k *vlan4k) |
| { |
| u32 data[3]; |
| int ret; |
| int i; |
| |
| if (vlan4k->vid >= RTL8366RB_NUM_VIDS || |
| vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK || |
| vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK || |
| vlan4k->fid > RTL8366RB_FIDMAX) |
| return -EINVAL; |
| |
| data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK; |
| data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) | |
| ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) << |
| RTL8366RB_VLAN_UNTAG_SHIFT); |
| data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK; |
| |
| for (i = 0; i < 3; i++) { |
| ret = regmap_write(smi->map, |
| RTL8366RB_VLAN_TABLE_WRITE_BASE + i, |
| data[i]); |
| if (ret) |
| return ret; |
| } |
| |
| /* write table access control word */ |
| ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, |
| RTL8366RB_TABLE_VLAN_WRITE_CTRL); |
| |
| return ret; |
| } |
| |
| static int rtl8366rb_get_vlan_mc(struct realtek_smi *smi, u32 index, |
| struct rtl8366_vlan_mc *vlanmc) |
| { |
| u32 data[3]; |
| int ret; |
| int i; |
| |
| memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc)); |
| |
| if (index >= RTL8366RB_NUM_VLANS) |
| return -EINVAL; |
| |
| for (i = 0; i < 3; i++) { |
| ret = regmap_read(smi->map, |
| RTL8366RB_VLAN_MC_BASE(index) + i, |
| &data[i]); |
| if (ret) |
| return ret; |
| } |
| |
| vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK; |
| vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) & |
| RTL8366RB_VLAN_PRIORITY_MASK; |
| vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & |
| RTL8366RB_VLAN_UNTAG_MASK; |
| vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; |
| vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK; |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_set_vlan_mc(struct realtek_smi *smi, u32 index, |
| const struct rtl8366_vlan_mc *vlanmc) |
| { |
| u32 data[3]; |
| int ret; |
| int i; |
| |
| if (index >= RTL8366RB_NUM_VLANS || |
| vlanmc->vid >= RTL8366RB_NUM_VIDS || |
| vlanmc->priority > RTL8366RB_PRIORITYMAX || |
| vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK || |
| vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK || |
| vlanmc->fid > RTL8366RB_FIDMAX) |
| return -EINVAL; |
| |
| data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) | |
| ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) << |
| RTL8366RB_VLAN_PRIORITY_SHIFT); |
| data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) | |
| ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) << |
| RTL8366RB_VLAN_UNTAG_SHIFT); |
| data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK; |
| |
| for (i = 0; i < 3; i++) { |
| ret = regmap_write(smi->map, |
| RTL8366RB_VLAN_MC_BASE(index) + i, |
| data[i]); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val) |
| { |
| u32 data; |
| int ret; |
| |
| if (port >= smi->num_ports) |
| return -EINVAL; |
| |
| ret = regmap_read(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), |
| &data); |
| if (ret) |
| return ret; |
| |
| *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) & |
| RTL8366RB_PORT_VLAN_CTRL_MASK; |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index) |
| { |
| if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS) |
| return -EINVAL; |
| |
| return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), |
| RTL8366RB_PORT_VLAN_CTRL_MASK << |
| RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), |
| (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << |
| RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); |
| } |
| |
| static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan) |
| { |
| unsigned int max = RTL8366RB_NUM_VLANS; |
| |
| if (smi->vlan4k_enabled) |
| max = RTL8366RB_NUM_VIDS - 1; |
| |
| if (vlan == 0 || vlan > max) |
| return false; |
| |
| return true; |
| } |
| |
| static int rtl8366rb_enable_vlan(struct realtek_smi *smi, bool enable) |
| { |
| dev_dbg(smi->dev, "%s VLAN\n", enable ? "enable" : "disable"); |
| return regmap_update_bits(smi->map, |
| RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, |
| enable ? RTL8366RB_SGCR_EN_VLAN : 0); |
| } |
| |
| static int rtl8366rb_enable_vlan4k(struct realtek_smi *smi, bool enable) |
| { |
| dev_dbg(smi->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); |
| return regmap_update_bits(smi->map, RTL8366RB_SGCR, |
| RTL8366RB_SGCR_EN_VLAN_4KTB, |
| enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); |
| } |
| |
| static int rtl8366rb_phy_read(struct realtek_smi *smi, int phy, int regnum) |
| { |
| u32 val; |
| u32 reg; |
| int ret; |
| |
| if (phy > RTL8366RB_PHY_NO_MAX) |
| return -EINVAL; |
| |
| ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, |
| RTL8366RB_PHY_CTRL_READ); |
| if (ret) |
| return ret; |
| |
| reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; |
| |
| ret = regmap_write(smi->map, reg, 0); |
| if (ret) { |
| dev_err(smi->dev, |
| "failed to write PHY%d reg %04x @ %04x, ret %d\n", |
| phy, regnum, reg, ret); |
| return ret; |
| } |
| |
| ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_DATA_REG, &val); |
| if (ret) |
| return ret; |
| |
| dev_dbg(smi->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n", |
| phy, regnum, reg, val); |
| |
| return val; |
| } |
| |
| static int rtl8366rb_phy_write(struct realtek_smi *smi, int phy, int regnum, |
| u16 val) |
| { |
| u32 reg; |
| int ret; |
| |
| if (phy > RTL8366RB_PHY_NO_MAX) |
| return -EINVAL; |
| |
| ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, |
| RTL8366RB_PHY_CTRL_WRITE); |
| if (ret) |
| return ret; |
| |
| reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; |
| |
| dev_dbg(smi->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n", |
| phy, regnum, reg, val); |
| |
| ret = regmap_write(smi->map, reg, val); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_reset_chip(struct realtek_smi *smi) |
| { |
| int timeout = 10; |
| u32 val; |
| int ret; |
| |
| realtek_smi_write_reg_noack(smi, RTL8366RB_RESET_CTRL_REG, |
| RTL8366RB_CHIP_CTRL_RESET_HW); |
| do { |
| usleep_range(20000, 25000); |
| ret = regmap_read(smi->map, RTL8366RB_RESET_CTRL_REG, &val); |
| if (ret) |
| return ret; |
| |
| if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW)) |
| break; |
| } while (--timeout); |
| |
| if (!timeout) { |
| dev_err(smi->dev, "timeout waiting for the switch to reset\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int rtl8366rb_detect(struct realtek_smi *smi) |
| { |
| struct device *dev = smi->dev; |
| int ret; |
| u32 val; |
| |
| /* Detect device */ |
| ret = regmap_read(smi->map, 0x5c, &val); |
| if (ret) { |
| dev_err(dev, "can't get chip ID (%d)\n", ret); |
| return ret; |
| } |
| |
| switch (val) { |
| case 0x6027: |
| dev_info(dev, "found an RTL8366S switch\n"); |
| dev_err(dev, "this switch is not yet supported, submit patches!\n"); |
| return -ENODEV; |
| case 0x5937: |
| dev_info(dev, "found an RTL8366RB switch\n"); |
| smi->cpu_port = RTL8366RB_PORT_NUM_CPU; |
| smi->num_ports = RTL8366RB_NUM_PORTS; |
| smi->num_vlan_mc = RTL8366RB_NUM_VLANS; |
| smi->mib_counters = rtl8366rb_mib_counters; |
| smi->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters); |
| break; |
| default: |
| dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n", |
| val); |
| break; |
| } |
| |
| ret = rtl8366rb_reset_chip(smi); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct dsa_switch_ops rtl8366rb_switch_ops = { |
| .get_tag_protocol = rtl8366_get_tag_protocol, |
| .setup = rtl8366rb_setup, |
| .adjust_link = rtl8366rb_adjust_link, |
| .get_strings = rtl8366_get_strings, |
| .get_ethtool_stats = rtl8366_get_ethtool_stats, |
| .get_sset_count = rtl8366_get_sset_count, |
| .port_vlan_filtering = rtl8366_vlan_filtering, |
| .port_vlan_prepare = rtl8366_vlan_prepare, |
| .port_vlan_add = rtl8366_vlan_add, |
| .port_vlan_del = rtl8366_vlan_del, |
| .port_enable = rtl8366rb_port_enable, |
| .port_disable = rtl8366rb_port_disable, |
| }; |
| |
| static const struct realtek_smi_ops rtl8366rb_smi_ops = { |
| .detect = rtl8366rb_detect, |
| .get_vlan_mc = rtl8366rb_get_vlan_mc, |
| .set_vlan_mc = rtl8366rb_set_vlan_mc, |
| .get_vlan_4k = rtl8366rb_get_vlan_4k, |
| .set_vlan_4k = rtl8366rb_set_vlan_4k, |
| .get_mc_index = rtl8366rb_get_mc_index, |
| .set_mc_index = rtl8366rb_set_mc_index, |
| .get_mib_counter = rtl8366rb_get_mib_counter, |
| .is_vlan_valid = rtl8366rb_is_vlan_valid, |
| .enable_vlan = rtl8366rb_enable_vlan, |
| .enable_vlan4k = rtl8366rb_enable_vlan4k, |
| .phy_read = rtl8366rb_phy_read, |
| .phy_write = rtl8366rb_phy_write, |
| }; |
| |
| const struct realtek_smi_variant rtl8366rb_variant = { |
| .ds_ops = &rtl8366rb_switch_ops, |
| .ops = &rtl8366rb_smi_ops, |
| .clk_delay = 10, |
| .cmd_read = 0xa9, |
| .cmd_write = 0xa8, |
| }; |
| EXPORT_SYMBOL_GPL(rtl8366rb_variant); |