| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LTC2632 Digital to analog convertors spi driver |
| * |
| * Copyright 2017 Maxime Roussin-BĂ©langer |
| * expanded by Silvan Murer <silvan.murer@gmail.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/spi/spi.h> |
| #include <linux/module.h> |
| #include <linux/iio/iio.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define LTC2632_DAC_CHANNELS 2 |
| |
| #define LTC2632_ADDR_DAC0 0x0 |
| #define LTC2632_ADDR_DAC1 0x1 |
| |
| #define LTC2632_CMD_WRITE_INPUT_N 0x0 |
| #define LTC2632_CMD_UPDATE_DAC_N 0x1 |
| #define LTC2632_CMD_WRITE_INPUT_N_UPDATE_ALL 0x2 |
| #define LTC2632_CMD_WRITE_INPUT_N_UPDATE_N 0x3 |
| #define LTC2632_CMD_POWERDOWN_DAC_N 0x4 |
| #define LTC2632_CMD_POWERDOWN_CHIP 0x5 |
| #define LTC2632_CMD_INTERNAL_REFER 0x6 |
| #define LTC2632_CMD_EXTERNAL_REFER 0x7 |
| |
| /** |
| * struct ltc2632_chip_info - chip specific information |
| * @channels: channel spec for the DAC |
| * @vref_mv: internal reference voltage |
| */ |
| struct ltc2632_chip_info { |
| const struct iio_chan_spec *channels; |
| const int vref_mv; |
| }; |
| |
| /** |
| * struct ltc2632_state - driver instance specific data |
| * @spi_dev: pointer to the spi_device struct |
| * @powerdown_cache_mask used to show current channel powerdown state |
| * @vref_mv used reference voltage (internal or external) |
| * @vref_reg regulator for the reference voltage |
| */ |
| struct ltc2632_state { |
| struct spi_device *spi_dev; |
| unsigned int powerdown_cache_mask; |
| int vref_mv; |
| struct regulator *vref_reg; |
| }; |
| |
| enum ltc2632_supported_device_ids { |
| ID_LTC2632L12, |
| ID_LTC2632L10, |
| ID_LTC2632L8, |
| ID_LTC2632H12, |
| ID_LTC2632H10, |
| ID_LTC2632H8, |
| }; |
| |
| static int ltc2632_spi_write(struct spi_device *spi, |
| u8 cmd, u8 addr, u16 val, u8 shift) |
| { |
| u32 data; |
| u8 msg[3]; |
| |
| /* |
| * The input shift register is 24 bits wide. |
| * The next four are the command bits, C3 to C0, |
| * followed by the 4-bit DAC address, A3 to A0, and then the |
| * 12-, 10-, 8-bit data-word. The data-word comprises the 12-, |
| * 10-, 8-bit input code followed by 4, 6, or 8 don't care bits. |
| */ |
| data = (cmd << 20) | (addr << 16) | (val << shift); |
| msg[0] = data >> 16; |
| msg[1] = data >> 8; |
| msg[2] = data; |
| |
| return spi_write(spi, msg, sizeof(msg)); |
| } |
| |
| static int ltc2632_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| const struct ltc2632_state *st = iio_priv(indio_dev); |
| |
| switch (m) { |
| case IIO_CHAN_INFO_SCALE: |
| *val = st->vref_mv; |
| *val2 = chan->scan_type.realbits; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| } |
| return -EINVAL; |
| } |
| |
| static int ltc2632_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| struct ltc2632_state *st = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| if (val >= (1 << chan->scan_type.realbits) || val < 0) |
| return -EINVAL; |
| |
| return ltc2632_spi_write(st->spi_dev, |
| LTC2632_CMD_WRITE_INPUT_N_UPDATE_N, |
| chan->address, val, |
| chan->scan_type.shift); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t ltc2632_read_dac_powerdown(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| char *buf) |
| { |
| struct ltc2632_state *st = iio_priv(indio_dev); |
| |
| return sprintf(buf, "%d\n", |
| !!(st->powerdown_cache_mask & (1 << chan->channel))); |
| } |
| |
| static ssize_t ltc2632_write_dac_powerdown(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| const char *buf, |
| size_t len) |
| { |
| bool pwr_down; |
| int ret; |
| struct ltc2632_state *st = iio_priv(indio_dev); |
| |
| ret = strtobool(buf, &pwr_down); |
| if (ret) |
| return ret; |
| |
| if (pwr_down) |
| st->powerdown_cache_mask |= (1 << chan->channel); |
| else |
| st->powerdown_cache_mask &= ~(1 << chan->channel); |
| |
| ret = ltc2632_spi_write(st->spi_dev, |
| LTC2632_CMD_POWERDOWN_DAC_N, |
| chan->channel, 0, 0); |
| |
| return ret ? ret : len; |
| } |
| |
| static const struct iio_info ltc2632_info = { |
| .write_raw = ltc2632_write_raw, |
| .read_raw = ltc2632_read_raw, |
| }; |
| |
| static const struct iio_chan_spec_ext_info ltc2632_ext_info[] = { |
| { |
| .name = "powerdown", |
| .read = ltc2632_read_dac_powerdown, |
| .write = ltc2632_write_dac_powerdown, |
| .shared = IIO_SEPARATE, |
| }, |
| { }, |
| }; |
| |
| #define LTC2632_CHANNEL(_chan, _bits) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .output = 1, \ |
| .channel = (_chan), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .address = (_chan), \ |
| .scan_type = { \ |
| .realbits = (_bits), \ |
| .shift = 16 - (_bits), \ |
| }, \ |
| .ext_info = ltc2632_ext_info, \ |
| } |
| |
| #define DECLARE_LTC2632_CHANNELS(_name, _bits) \ |
| const struct iio_chan_spec _name ## _channels[] = { \ |
| LTC2632_CHANNEL(0, _bits), \ |
| LTC2632_CHANNEL(1, _bits), \ |
| } |
| |
| static DECLARE_LTC2632_CHANNELS(ltc2632l12, 12); |
| static DECLARE_LTC2632_CHANNELS(ltc2632l10, 10); |
| static DECLARE_LTC2632_CHANNELS(ltc2632l8, 8); |
| |
| static DECLARE_LTC2632_CHANNELS(ltc2632h12, 12); |
| static DECLARE_LTC2632_CHANNELS(ltc2632h10, 10); |
| static DECLARE_LTC2632_CHANNELS(ltc2632h8, 8); |
| |
| static const struct ltc2632_chip_info ltc2632_chip_info_tbl[] = { |
| [ID_LTC2632L12] = { |
| .channels = ltc2632l12_channels, |
| .vref_mv = 2500, |
| }, |
| [ID_LTC2632L10] = { |
| .channels = ltc2632l10_channels, |
| .vref_mv = 2500, |
| }, |
| [ID_LTC2632L8] = { |
| .channels = ltc2632l8_channels, |
| .vref_mv = 2500, |
| }, |
| [ID_LTC2632H12] = { |
| .channels = ltc2632h12_channels, |
| .vref_mv = 4096, |
| }, |
| [ID_LTC2632H10] = { |
| .channels = ltc2632h10_channels, |
| .vref_mv = 4096, |
| }, |
| [ID_LTC2632H8] = { |
| .channels = ltc2632h8_channels, |
| .vref_mv = 4096, |
| }, |
| }; |
| |
| static int ltc2632_probe(struct spi_device *spi) |
| { |
| struct ltc2632_state *st; |
| struct iio_dev *indio_dev; |
| struct ltc2632_chip_info *chip_info; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| spi_set_drvdata(spi, indio_dev); |
| st->spi_dev = spi; |
| |
| chip_info = (struct ltc2632_chip_info *) |
| spi_get_device_id(spi)->driver_data; |
| |
| st->vref_reg = devm_regulator_get_optional(&spi->dev, "vref"); |
| if (PTR_ERR(st->vref_reg) == -ENODEV) { |
| /* use internal reference voltage */ |
| st->vref_reg = NULL; |
| st->vref_mv = chip_info->vref_mv; |
| |
| ret = ltc2632_spi_write(spi, LTC2632_CMD_INTERNAL_REFER, |
| 0, 0, 0); |
| if (ret) { |
| dev_err(&spi->dev, |
| "Set internal reference command failed, %d\n", |
| ret); |
| return ret; |
| } |
| } else if (IS_ERR(st->vref_reg)) { |
| dev_err(&spi->dev, |
| "Error getting voltage reference regulator\n"); |
| return PTR_ERR(st->vref_reg); |
| } else { |
| /* use external reference voltage */ |
| ret = regulator_enable(st->vref_reg); |
| if (ret) { |
| dev_err(&spi->dev, |
| "enable reference regulator failed, %d\n", |
| ret); |
| return ret; |
| } |
| st->vref_mv = regulator_get_voltage(st->vref_reg) / 1000; |
| |
| ret = ltc2632_spi_write(spi, LTC2632_CMD_EXTERNAL_REFER, |
| 0, 0, 0); |
| if (ret) { |
| dev_err(&spi->dev, |
| "Set external reference command failed, %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| indio_dev->dev.parent = &spi->dev; |
| indio_dev->name = dev_of_node(&spi->dev) ? dev_of_node(&spi->dev)->name |
| : spi_get_device_id(spi)->name; |
| indio_dev->info = <c2632_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = chip_info->channels; |
| indio_dev->num_channels = LTC2632_DAC_CHANNELS; |
| |
| return iio_device_register(indio_dev); |
| } |
| |
| static int ltc2632_remove(struct spi_device *spi) |
| { |
| struct iio_dev *indio_dev = spi_get_drvdata(spi); |
| struct ltc2632_state *st = iio_priv(indio_dev); |
| |
| iio_device_unregister(indio_dev); |
| |
| if (st->vref_reg) |
| regulator_disable(st->vref_reg); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id ltc2632_id[] = { |
| { "ltc2632-l12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L12] }, |
| { "ltc2632-l10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L10] }, |
| { "ltc2632-l8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632L8] }, |
| { "ltc2632-h12", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H12] }, |
| { "ltc2632-h10", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H10] }, |
| { "ltc2632-h8", (kernel_ulong_t)<c2632_chip_info_tbl[ID_LTC2632H8] }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, ltc2632_id); |
| |
| static const struct of_device_id ltc2632_of_match[] = { |
| { |
| .compatible = "lltc,ltc2632-l12", |
| .data = <c2632_chip_info_tbl[ID_LTC2632L12] |
| }, { |
| .compatible = "lltc,ltc2632-l10", |
| .data = <c2632_chip_info_tbl[ID_LTC2632L10] |
| }, { |
| .compatible = "lltc,ltc2632-l8", |
| .data = <c2632_chip_info_tbl[ID_LTC2632L8] |
| }, { |
| .compatible = "lltc,ltc2632-h12", |
| .data = <c2632_chip_info_tbl[ID_LTC2632H12] |
| }, { |
| .compatible = "lltc,ltc2632-h10", |
| .data = <c2632_chip_info_tbl[ID_LTC2632H10] |
| }, { |
| .compatible = "lltc,ltc2632-h8", |
| .data = <c2632_chip_info_tbl[ID_LTC2632H8] |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, ltc2632_of_match); |
| |
| static struct spi_driver ltc2632_driver = { |
| .driver = { |
| .name = "ltc2632", |
| .of_match_table = of_match_ptr(ltc2632_of_match), |
| }, |
| .probe = ltc2632_probe, |
| .remove = ltc2632_remove, |
| .id_table = ltc2632_id, |
| }; |
| module_spi_driver(ltc2632_driver); |
| |
| MODULE_AUTHOR("Maxime Roussin-Belanger <maxime.roussinbelanger@gmail.com>"); |
| MODULE_DESCRIPTION("LTC2632 DAC SPI driver"); |
| MODULE_LICENSE("GPL v2"); |