blob: 44bee462ff5791ab2408da2b8b5a6d3b4065b6ea [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/suspend.h>
#include <linux/suspend_ioctls.h>
#include <linux/utsname.h>
#include <linux/freezer.h>
#include <linux/compiler.h>
struct swsusp_info {
struct new_utsname uts;
u32 version_code;
unsigned long num_physpages;
int cpus;
unsigned long image_pages;
unsigned long pages;
unsigned long size;
} __aligned(PAGE_SIZE);
#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
extern void __init hibernate_reserved_size_init(void);
extern void __init hibernate_image_size_init(void);
#ifdef CONFIG_ARCH_HIBERNATION_HEADER
/* Maximum size of architecture specific data in a hibernation header */
#define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4)
extern int arch_hibernation_header_save(void *addr, unsigned int max_size);
extern int arch_hibernation_header_restore(void *addr);
static inline int init_header_complete(struct swsusp_info *info)
{
return arch_hibernation_header_save(info, MAX_ARCH_HEADER_SIZE);
}
static inline char *check_image_kernel(struct swsusp_info *info)
{
return arch_hibernation_header_restore(info) ?
"architecture specific data" : NULL;
}
#endif /* CONFIG_ARCH_HIBERNATION_HEADER */
extern int hibernate_resume_nonboot_cpu_disable(void);
/*
* Keep some memory free so that I/O operations can succeed without paging
* [Might this be more than 4 MB?]
*/
#define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
/*
* Keep 1 MB of memory free so that device drivers can allocate some pages in
* their .suspend() routines without breaking the suspend to disk.
*/
#define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
asmlinkage int swsusp_save(void);
/* kernel/power/hibernate.c */
extern bool freezer_test_done;
extern int hibernation_snapshot(int platform_mode);
extern int hibernation_restore(int platform_mode);
extern int hibernation_platform_enter(void);
#ifdef CONFIG_STRICT_KERNEL_RWX
/* kernel/power/snapshot.c */
extern void enable_restore_image_protection(void);
#else
static inline void enable_restore_image_protection(void) {}
#endif /* CONFIG_STRICT_KERNEL_RWX */
#else /* !CONFIG_HIBERNATION */
static inline void hibernate_reserved_size_init(void) {}
static inline void hibernate_image_size_init(void) {}
#endif /* !CONFIG_HIBERNATION */
#define power_attr(_name) \
static struct kobj_attribute _name##_attr = { \
.attr = { \
.name = __stringify(_name), \
.mode = 0644, \
}, \
.show = _name##_show, \
.store = _name##_store, \
}
#define power_attr_ro(_name) \
static struct kobj_attribute _name##_attr = { \
.attr = { \
.name = __stringify(_name), \
.mode = S_IRUGO, \
}, \
.show = _name##_show, \
}
/* Preferred image size in bytes (default 500 MB) */
extern unsigned long image_size;
/* Size of memory reserved for drivers (default SPARE_PAGES x PAGE_SIZE) */
extern unsigned long reserved_size;
extern int in_suspend;
extern dev_t swsusp_resume_device;
extern sector_t swsusp_resume_block;
extern int create_basic_memory_bitmaps(void);
extern void free_basic_memory_bitmaps(void);
extern int hibernate_preallocate_memory(void);
extern void clear_free_pages(void);
/**
* Auxiliary structure used for reading the snapshot image data and
* metadata from and writing them to the list of page backup entries
* (PBEs) which is the main data structure of swsusp.
*
* Using struct snapshot_handle we can transfer the image, including its
* metadata, as a continuous sequence of bytes with the help of
* snapshot_read_next() and snapshot_write_next().
*
* The code that writes the image to a storage or transfers it to
* the user land is required to use snapshot_read_next() for this
* purpose and it should not make any assumptions regarding the internal
* structure of the image. Similarly, the code that reads the image from
* a storage or transfers it from the user land is required to use
* snapshot_write_next().
*
* This may allow us to change the internal structure of the image
* in the future with considerably less effort.
*/
struct snapshot_handle {
unsigned int cur; /* number of the block of PAGE_SIZE bytes the
* next operation will refer to (ie. current)
*/
void *buffer; /* address of the block to read from
* or write to
*/
int sync_read; /* Set to one to notify the caller of
* snapshot_write_next() that it may
* need to call wait_on_bio_chain()
*/
};
/* This macro returns the address from/to which the caller of
* snapshot_read_next()/snapshot_write_next() is allowed to
* read/write data after the function returns
*/
#define data_of(handle) ((handle).buffer)
extern unsigned int snapshot_additional_pages(struct zone *zone);
extern unsigned long snapshot_get_image_size(void);
extern int snapshot_read_next(struct snapshot_handle *handle);
extern int snapshot_write_next(struct snapshot_handle *handle);
extern void snapshot_write_finalize(struct snapshot_handle *handle);
extern int snapshot_image_loaded(struct snapshot_handle *handle);
/* If unset, the snapshot device cannot be open. */
extern atomic_t snapshot_device_available;
extern sector_t alloc_swapdev_block(int swap);
extern void free_all_swap_pages(int swap);
extern int swsusp_swap_in_use(void);
/*
* Flags that can be passed from the hibernatig hernel to the "boot" kernel in
* the image header.
*/
#define SF_PLATFORM_MODE 1
#define SF_NOCOMPRESS_MODE 2
#define SF_CRC32_MODE 4
/* kernel/power/hibernate.c */
extern int swsusp_check(void);
extern void swsusp_free(void);
extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags);
extern void swsusp_close(fmode_t);
#ifdef CONFIG_SUSPEND
extern int swsusp_unmark(void);
#endif
struct timeval;
/* kernel/power/swsusp.c */
extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *);
#ifdef CONFIG_SUSPEND
/* kernel/power/suspend.c */
extern const char * const pm_labels[];
extern const char *pm_states[];
extern const char *mem_sleep_states[];
extern int suspend_devices_and_enter(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
#define mem_sleep_current PM_SUSPEND_ON
static inline int suspend_devices_and_enter(suspend_state_t state)
{
return -ENOSYS;
}
#endif /* !CONFIG_SUSPEND */
#ifdef CONFIG_PM_TEST_SUSPEND
/* kernel/power/suspend_test.c */
extern void suspend_test_start(void);
extern void suspend_test_finish(const char *label);
#else /* !CONFIG_PM_TEST_SUSPEND */
static inline void suspend_test_start(void) {}
static inline void suspend_test_finish(const char *label) {}
#endif /* !CONFIG_PM_TEST_SUSPEND */
#ifdef CONFIG_PM_SLEEP
/* kernel/power/main.c */
extern int __pm_notifier_call_chain(unsigned long val, int nr_to_call,
int *nr_calls);
extern int pm_notifier_call_chain(unsigned long val);
#endif
#ifdef CONFIG_HIGHMEM
int restore_highmem(void);
#else
static inline unsigned int count_highmem_pages(void) { return 0; }
static inline int restore_highmem(void) { return 0; }
#endif
/*
* Suspend test levels
*/
enum {
/* keep first */
TEST_NONE,
TEST_CORE,
TEST_CPUS,
TEST_PLATFORM,
TEST_DEVICES,
TEST_FREEZER,
/* keep last */
__TEST_AFTER_LAST
};
#define TEST_FIRST TEST_NONE
#define TEST_MAX (__TEST_AFTER_LAST - 1)
#ifdef CONFIG_PM_SLEEP_DEBUG
extern int pm_test_level;
#else
#define pm_test_level (TEST_NONE)
#endif
#ifdef CONFIG_SUSPEND_FREEZER
static inline int suspend_freeze_processes(void)
{
int error;
error = freeze_processes();
/*
* freeze_processes() automatically thaws every task if freezing
* fails. So we need not do anything extra upon error.
*/
if (error)
return error;
error = freeze_kernel_threads();
/*
* freeze_kernel_threads() thaws only kernel threads upon freezing
* failure. So we have to thaw the userspace tasks ourselves.
*/
if (error)
thaw_processes();
return error;
}
static inline void suspend_thaw_processes(void)
{
thaw_processes();
}
#else
static inline int suspend_freeze_processes(void)
{
return 0;
}
static inline void suspend_thaw_processes(void)
{
}
#endif
#ifdef CONFIG_PM_AUTOSLEEP
/* kernel/power/autosleep.c */
extern int pm_autosleep_init(void);
extern int pm_autosleep_lock(void);
extern void pm_autosleep_unlock(void);
extern suspend_state_t pm_autosleep_state(void);
extern int pm_autosleep_set_state(suspend_state_t state);
#else /* !CONFIG_PM_AUTOSLEEP */
static inline int pm_autosleep_init(void) { return 0; }
static inline int pm_autosleep_lock(void) { return 0; }
static inline void pm_autosleep_unlock(void) {}
static inline suspend_state_t pm_autosleep_state(void) { return PM_SUSPEND_ON; }
#endif /* !CONFIG_PM_AUTOSLEEP */
#ifdef CONFIG_PM_WAKELOCKS
/* kernel/power/wakelock.c */
extern ssize_t pm_show_wakelocks(char *buf, bool show_active);
extern int pm_wake_lock(const char *buf);
extern int pm_wake_unlock(const char *buf);
#endif /* !CONFIG_PM_WAKELOCKS */