| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * skl-topology.c - Implements Platform component ALSA controls/widget | |
| * handlers. | |
| * | |
| * Copyright (C) 2014-2015 Intel Corp | |
| * Author: Jeeja KP <jeeja.kp@intel.com> | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <linux/firmware.h> | |
| #include <linux/uuid.h> | |
| #include <sound/intel-nhlt.h> | |
| #include <sound/soc.h> | |
| #include <sound/soc-acpi.h> | |
| #include <sound/soc-topology.h> | |
| #include <uapi/sound/snd_sst_tokens.h> | |
| #include <uapi/sound/skl-tplg-interface.h> | |
| #include "skl-sst-dsp.h" | |
| #include "skl-sst-ipc.h" | |
| #include "skl-topology.h" | |
| #include "skl.h" | |
| #include "../common/sst-dsp.h" | |
| #include "../common/sst-dsp-priv.h" | |
| #define SKL_CH_FIXUP_MASK (1 << 0) | |
| #define SKL_RATE_FIXUP_MASK (1 << 1) | |
| #define SKL_FMT_FIXUP_MASK (1 << 2) | |
| #define SKL_IN_DIR_BIT_MASK BIT(0) | |
| #define SKL_PIN_COUNT_MASK GENMASK(7, 4) | |
| static const int mic_mono_list[] = { | |
| 0, 1, 2, 3, | |
| }; | |
| static const int mic_stereo_list[][SKL_CH_STEREO] = { | |
| {0, 1}, {0, 2}, {0, 3}, {1, 2}, {1, 3}, {2, 3}, | |
| }; | |
| static const int mic_trio_list[][SKL_CH_TRIO] = { | |
| {0, 1, 2}, {0, 1, 3}, {0, 2, 3}, {1, 2, 3}, | |
| }; | |
| static const int mic_quatro_list[][SKL_CH_QUATRO] = { | |
| {0, 1, 2, 3}, | |
| }; | |
| #define CHECK_HW_PARAMS(ch, freq, bps, prm_ch, prm_freq, prm_bps) \ | |
| ((ch == prm_ch) && (bps == prm_bps) && (freq == prm_freq)) | |
| void skl_tplg_d0i3_get(struct skl_dev *skl, enum d0i3_capability caps) | |
| { | |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; | |
| switch (caps) { | |
| case SKL_D0I3_NONE: | |
| d0i3->non_d0i3++; | |
| break; | |
| case SKL_D0I3_STREAMING: | |
| d0i3->streaming++; | |
| break; | |
| case SKL_D0I3_NON_STREAMING: | |
| d0i3->non_streaming++; | |
| break; | |
| } | |
| } | |
| void skl_tplg_d0i3_put(struct skl_dev *skl, enum d0i3_capability caps) | |
| { | |
| struct skl_d0i3_data *d0i3 = &skl->d0i3; | |
| switch (caps) { | |
| case SKL_D0I3_NONE: | |
| d0i3->non_d0i3--; | |
| break; | |
| case SKL_D0I3_STREAMING: | |
| d0i3->streaming--; | |
| break; | |
| case SKL_D0I3_NON_STREAMING: | |
| d0i3->non_streaming--; | |
| break; | |
| } | |
| } | |
| /* | |
| * SKL DSP driver modelling uses only few DAPM widgets so for rest we will | |
| * ignore. This helpers checks if the SKL driver handles this widget type | |
| */ | |
| static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w, | |
| struct device *dev) | |
| { | |
| if (w->dapm->dev != dev) | |
| return false; | |
| switch (w->id) { | |
| case snd_soc_dapm_dai_link: | |
| case snd_soc_dapm_dai_in: | |
| case snd_soc_dapm_aif_in: | |
| case snd_soc_dapm_aif_out: | |
| case snd_soc_dapm_dai_out: | |
| case snd_soc_dapm_switch: | |
| case snd_soc_dapm_output: | |
| case snd_soc_dapm_mux: | |
| return false; | |
| default: | |
| return true; | |
| } | |
| } | |
| static void skl_dump_mconfig(struct skl_dev *skl, struct skl_module_cfg *mcfg) | |
| { | |
| struct skl_module_iface *iface = &mcfg->module->formats[mcfg->fmt_idx]; | |
| dev_dbg(skl->dev, "Dumping config\n"); | |
| dev_dbg(skl->dev, "Input Format:\n"); | |
| dev_dbg(skl->dev, "channels = %d\n", iface->inputs[0].fmt.channels); | |
| dev_dbg(skl->dev, "s_freq = %d\n", iface->inputs[0].fmt.s_freq); | |
| dev_dbg(skl->dev, "ch_cfg = %d\n", iface->inputs[0].fmt.ch_cfg); | |
| dev_dbg(skl->dev, "valid bit depth = %d\n", | |
| iface->inputs[0].fmt.valid_bit_depth); | |
| dev_dbg(skl->dev, "Output Format:\n"); | |
| dev_dbg(skl->dev, "channels = %d\n", iface->outputs[0].fmt.channels); | |
| dev_dbg(skl->dev, "s_freq = %d\n", iface->outputs[0].fmt.s_freq); | |
| dev_dbg(skl->dev, "valid bit depth = %d\n", | |
| iface->outputs[0].fmt.valid_bit_depth); | |
| dev_dbg(skl->dev, "ch_cfg = %d\n", iface->outputs[0].fmt.ch_cfg); | |
| } | |
| static void skl_tplg_update_chmap(struct skl_module_fmt *fmt, int chs) | |
| { | |
| int slot_map = 0xFFFFFFFF; | |
| int start_slot = 0; | |
| int i; | |
| for (i = 0; i < chs; i++) { | |
| /* | |
| * For 2 channels with starting slot as 0, slot map will | |
| * look like 0xFFFFFF10. | |
| */ | |
| slot_map &= (~(0xF << (4 * i)) | (start_slot << (4 * i))); | |
| start_slot++; | |
| } | |
| fmt->ch_map = slot_map; | |
| } | |
| static void skl_tplg_update_params(struct skl_module_fmt *fmt, | |
| struct skl_pipe_params *params, int fixup) | |
| { | |
| if (fixup & SKL_RATE_FIXUP_MASK) | |
| fmt->s_freq = params->s_freq; | |
| if (fixup & SKL_CH_FIXUP_MASK) { | |
| fmt->channels = params->ch; | |
| skl_tplg_update_chmap(fmt, fmt->channels); | |
| } | |
| if (fixup & SKL_FMT_FIXUP_MASK) { | |
| fmt->valid_bit_depth = skl_get_bit_depth(params->s_fmt); | |
| /* | |
| * 16 bit is 16 bit container whereas 24 bit is in 32 bit | |
| * container so update bit depth accordingly | |
| */ | |
| switch (fmt->valid_bit_depth) { | |
| case SKL_DEPTH_16BIT: | |
| fmt->bit_depth = fmt->valid_bit_depth; | |
| break; | |
| default: | |
| fmt->bit_depth = SKL_DEPTH_32BIT; | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * A pipeline may have modules which impact the pcm parameters, like SRC, | |
| * channel converter, format converter. | |
| * We need to calculate the output params by applying the 'fixup' | |
| * Topology will tell driver which type of fixup is to be applied by | |
| * supplying the fixup mask, so based on that we calculate the output | |
| * | |
| * Now In FE the pcm hw_params is source/target format. Same is applicable | |
| * for BE with its hw_params invoked. | |
| * here based on FE, BE pipeline and direction we calculate the input and | |
| * outfix and then apply that for a module | |
| */ | |
| static void skl_tplg_update_params_fixup(struct skl_module_cfg *m_cfg, | |
| struct skl_pipe_params *params, bool is_fe) | |
| { | |
| int in_fixup, out_fixup; | |
| struct skl_module_fmt *in_fmt, *out_fmt; | |
| /* Fixups will be applied to pin 0 only */ | |
| in_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].inputs[0].fmt; | |
| out_fmt = &m_cfg->module->formats[m_cfg->fmt_idx].outputs[0].fmt; | |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
| if (is_fe) { | |
| in_fixup = m_cfg->params_fixup; | |
| out_fixup = (~m_cfg->converter) & | |
| m_cfg->params_fixup; | |
| } else { | |
| out_fixup = m_cfg->params_fixup; | |
| in_fixup = (~m_cfg->converter) & | |
| m_cfg->params_fixup; | |
| } | |
| } else { | |
| if (is_fe) { | |
| out_fixup = m_cfg->params_fixup; | |
| in_fixup = (~m_cfg->converter) & | |
| m_cfg->params_fixup; | |
| } else { | |
| in_fixup = m_cfg->params_fixup; | |
| out_fixup = (~m_cfg->converter) & | |
| m_cfg->params_fixup; | |
| } | |
| } | |
| skl_tplg_update_params(in_fmt, params, in_fixup); | |
| skl_tplg_update_params(out_fmt, params, out_fixup); | |
| } | |
| /* | |
| * A module needs input and output buffers, which are dependent upon pcm | |
| * params, so once we have calculate params, we need buffer calculation as | |
| * well. | |
| */ | |
| static void skl_tplg_update_buffer_size(struct skl_dev *skl, | |
| struct skl_module_cfg *mcfg) | |
| { | |
| int multiplier = 1; | |
| struct skl_module_fmt *in_fmt, *out_fmt; | |
| struct skl_module_res *res; | |
| /* Since fixups is applied to pin 0 only, ibs, obs needs | |
| * change for pin 0 only | |
| */ | |
| res = &mcfg->module->resources[mcfg->res_idx]; | |
| in_fmt = &mcfg->module->formats[mcfg->fmt_idx].inputs[0].fmt; | |
| out_fmt = &mcfg->module->formats[mcfg->fmt_idx].outputs[0].fmt; | |
| if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT) | |
| multiplier = 5; | |
| res->ibs = DIV_ROUND_UP(in_fmt->s_freq, 1000) * | |
| in_fmt->channels * (in_fmt->bit_depth >> 3) * | |
| multiplier; | |
| res->obs = DIV_ROUND_UP(out_fmt->s_freq, 1000) * | |
| out_fmt->channels * (out_fmt->bit_depth >> 3) * | |
| multiplier; | |
| } | |
| static u8 skl_tplg_be_dev_type(int dev_type) | |
| { | |
| int ret; | |
| switch (dev_type) { | |
| case SKL_DEVICE_BT: | |
| ret = NHLT_DEVICE_BT; | |
| break; | |
| case SKL_DEVICE_DMIC: | |
| ret = NHLT_DEVICE_DMIC; | |
| break; | |
| case SKL_DEVICE_I2S: | |
| ret = NHLT_DEVICE_I2S; | |
| break; | |
| default: | |
| ret = NHLT_DEVICE_INVALID; | |
| break; | |
| } | |
| return ret; | |
| } | |
| static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *m_cfg = w->priv; | |
| int link_type, dir; | |
| u32 ch, s_freq, s_fmt; | |
| struct nhlt_specific_cfg *cfg; | |
| u8 dev_type = skl_tplg_be_dev_type(m_cfg->dev_type); | |
| int fmt_idx = m_cfg->fmt_idx; | |
| struct skl_module_iface *m_iface = &m_cfg->module->formats[fmt_idx]; | |
| /* check if we already have blob */ | |
| if (m_cfg->formats_config[SKL_PARAM_INIT].caps_size > 0) | |
| return 0; | |
| dev_dbg(skl->dev, "Applying default cfg blob\n"); | |
| switch (m_cfg->dev_type) { | |
| case SKL_DEVICE_DMIC: | |
| link_type = NHLT_LINK_DMIC; | |
| dir = SNDRV_PCM_STREAM_CAPTURE; | |
| s_freq = m_iface->inputs[0].fmt.s_freq; | |
| s_fmt = m_iface->inputs[0].fmt.bit_depth; | |
| ch = m_iface->inputs[0].fmt.channels; | |
| break; | |
| case SKL_DEVICE_I2S: | |
| link_type = NHLT_LINK_SSP; | |
| if (m_cfg->hw_conn_type == SKL_CONN_SOURCE) { | |
| dir = SNDRV_PCM_STREAM_PLAYBACK; | |
| s_freq = m_iface->outputs[0].fmt.s_freq; | |
| s_fmt = m_iface->outputs[0].fmt.bit_depth; | |
| ch = m_iface->outputs[0].fmt.channels; | |
| } else { | |
| dir = SNDRV_PCM_STREAM_CAPTURE; | |
| s_freq = m_iface->inputs[0].fmt.s_freq; | |
| s_fmt = m_iface->inputs[0].fmt.bit_depth; | |
| ch = m_iface->inputs[0].fmt.channels; | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* update the blob based on virtual bus_id and default params */ | |
| cfg = skl_get_ep_blob(skl, m_cfg->vbus_id, link_type, | |
| s_fmt, ch, s_freq, dir, dev_type); | |
| if (cfg) { | |
| m_cfg->formats_config[SKL_PARAM_INIT].caps_size = cfg->size; | |
| m_cfg->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps; | |
| } else { | |
| dev_err(skl->dev, "Blob NULL for id %x type %d dirn %d\n", | |
| m_cfg->vbus_id, link_type, dir); | |
| dev_err(skl->dev, "PCM: ch %d, freq %d, fmt %d\n", | |
| ch, s_freq, s_fmt); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static void skl_tplg_update_module_params(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *m_cfg = w->priv; | |
| struct skl_pipe_params *params = m_cfg->pipe->p_params; | |
| int p_conn_type = m_cfg->pipe->conn_type; | |
| bool is_fe; | |
| if (!m_cfg->params_fixup) | |
| return; | |
| dev_dbg(skl->dev, "Mconfig for widget=%s BEFORE updation\n", | |
| w->name); | |
| skl_dump_mconfig(skl, m_cfg); | |
| if (p_conn_type == SKL_PIPE_CONN_TYPE_FE) | |
| is_fe = true; | |
| else | |
| is_fe = false; | |
| skl_tplg_update_params_fixup(m_cfg, params, is_fe); | |
| skl_tplg_update_buffer_size(skl, m_cfg); | |
| dev_dbg(skl->dev, "Mconfig for widget=%s AFTER updation\n", | |
| w->name); | |
| skl_dump_mconfig(skl, m_cfg); | |
| } | |
| /* | |
| * some modules can have multiple params set from user control and | |
| * need to be set after module is initialized. If set_param flag is | |
| * set module params will be done after module is initialised. | |
| */ | |
| static int skl_tplg_set_module_params(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| int i, ret; | |
| struct skl_module_cfg *mconfig = w->priv; | |
| const struct snd_kcontrol_new *k; | |
| struct soc_bytes_ext *sb; | |
| struct skl_algo_data *bc; | |
| struct skl_specific_cfg *sp_cfg; | |
| if (mconfig->formats_config[SKL_PARAM_SET].caps_size > 0 && | |
| mconfig->formats_config[SKL_PARAM_SET].set_params == SKL_PARAM_SET) { | |
| sp_cfg = &mconfig->formats_config[SKL_PARAM_SET]; | |
| ret = skl_set_module_params(skl, sp_cfg->caps, | |
| sp_cfg->caps_size, | |
| sp_cfg->param_id, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| for (i = 0; i < w->num_kcontrols; i++) { | |
| k = &w->kcontrol_news[i]; | |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { | |
| sb = (void *) k->private_value; | |
| bc = (struct skl_algo_data *)sb->dobj.private; | |
| if (bc->set_params == SKL_PARAM_SET) { | |
| ret = skl_set_module_params(skl, | |
| (u32 *)bc->params, bc->size, | |
| bc->param_id, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * some module param can set from user control and this is required as | |
| * when module is initailzed. if module param is required in init it is | |
| * identifed by set_param flag. if set_param flag is not set, then this | |
| * parameter needs to set as part of module init. | |
| */ | |
| static int skl_tplg_set_module_init_data(struct snd_soc_dapm_widget *w) | |
| { | |
| const struct snd_kcontrol_new *k; | |
| struct soc_bytes_ext *sb; | |
| struct skl_algo_data *bc; | |
| struct skl_module_cfg *mconfig = w->priv; | |
| int i; | |
| for (i = 0; i < w->num_kcontrols; i++) { | |
| k = &w->kcontrol_news[i]; | |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { | |
| sb = (struct soc_bytes_ext *)k->private_value; | |
| bc = (struct skl_algo_data *)sb->dobj.private; | |
| if (bc->set_params != SKL_PARAM_INIT) | |
| continue; | |
| mconfig->formats_config[SKL_PARAM_INIT].caps = | |
| (u32 *)bc->params; | |
| mconfig->formats_config[SKL_PARAM_INIT].caps_size = | |
| bc->size; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_module_prepare(struct skl_dev *skl, struct skl_pipe *pipe, | |
| struct snd_soc_dapm_widget *w, struct skl_module_cfg *mcfg) | |
| { | |
| switch (mcfg->dev_type) { | |
| case SKL_DEVICE_HDAHOST: | |
| return skl_pcm_host_dma_prepare(skl->dev, pipe->p_params); | |
| case SKL_DEVICE_HDALINK: | |
| return skl_pcm_link_dma_prepare(skl->dev, pipe->p_params); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Inside a pipe instance, we can have various modules. These modules need | |
| * to instantiated in DSP by invoking INIT_MODULE IPC, which is achieved by | |
| * skl_init_module() routine, so invoke that for all modules in a pipeline | |
| */ | |
| static int | |
| skl_tplg_init_pipe_modules(struct skl_dev *skl, struct skl_pipe *pipe) | |
| { | |
| struct skl_pipe_module *w_module; | |
| struct snd_soc_dapm_widget *w; | |
| struct skl_module_cfg *mconfig; | |
| u8 cfg_idx; | |
| int ret = 0; | |
| list_for_each_entry(w_module, &pipe->w_list, node) { | |
| guid_t *uuid_mod; | |
| w = w_module->w; | |
| mconfig = w->priv; | |
| /* check if module ids are populated */ | |
| if (mconfig->id.module_id < 0) { | |
| dev_err(skl->dev, | |
| "module %pUL id not populated\n", | |
| (guid_t *)mconfig->guid); | |
| return -EIO; | |
| } | |
| cfg_idx = mconfig->pipe->cur_config_idx; | |
| mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; | |
| mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; | |
| if (mconfig->module->loadable && skl->dsp->fw_ops.load_mod) { | |
| ret = skl->dsp->fw_ops.load_mod(skl->dsp, | |
| mconfig->id.module_id, mconfig->guid); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| /* prepare the DMA if the module is gateway cpr */ | |
| ret = skl_tplg_module_prepare(skl, pipe, w, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| /* update blob if blob is null for be with default value */ | |
| skl_tplg_update_be_blob(w, skl); | |
| /* | |
| * apply fix/conversion to module params based on | |
| * FE/BE params | |
| */ | |
| skl_tplg_update_module_params(w, skl); | |
| uuid_mod = (guid_t *)mconfig->guid; | |
| mconfig->id.pvt_id = skl_get_pvt_id(skl, uuid_mod, | |
| mconfig->id.instance_id); | |
| if (mconfig->id.pvt_id < 0) | |
| return ret; | |
| skl_tplg_set_module_init_data(w); | |
| ret = skl_dsp_get_core(skl->dsp, mconfig->core_id); | |
| if (ret < 0) { | |
| dev_err(skl->dev, "Failed to wake up core %d ret=%d\n", | |
| mconfig->core_id, ret); | |
| return ret; | |
| } | |
| ret = skl_init_module(skl, mconfig); | |
| if (ret < 0) { | |
| skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id); | |
| goto err; | |
| } | |
| ret = skl_tplg_set_module_params(w, skl); | |
| if (ret < 0) | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| skl_dsp_put_core(skl->dsp, mconfig->core_id); | |
| return ret; | |
| } | |
| static int skl_tplg_unload_pipe_modules(struct skl_dev *skl, | |
| struct skl_pipe *pipe) | |
| { | |
| int ret = 0; | |
| struct skl_pipe_module *w_module; | |
| struct skl_module_cfg *mconfig; | |
| list_for_each_entry(w_module, &pipe->w_list, node) { | |
| guid_t *uuid_mod; | |
| mconfig = w_module->w->priv; | |
| uuid_mod = (guid_t *)mconfig->guid; | |
| if (mconfig->module->loadable && skl->dsp->fw_ops.unload_mod) { | |
| ret = skl->dsp->fw_ops.unload_mod(skl->dsp, | |
| mconfig->id.module_id); | |
| if (ret < 0) | |
| return -EIO; | |
| } | |
| skl_put_pvt_id(skl, uuid_mod, &mconfig->id.pvt_id); | |
| ret = skl_dsp_put_core(skl->dsp, mconfig->core_id); | |
| if (ret < 0) { | |
| /* don't return; continue with other modules */ | |
| dev_err(skl->dev, "Failed to sleep core %d ret=%d\n", | |
| mconfig->core_id, ret); | |
| } | |
| } | |
| /* no modules to unload in this path, so return */ | |
| return ret; | |
| } | |
| static bool skl_tplg_is_multi_fmt(struct skl_dev *skl, struct skl_pipe *pipe) | |
| { | |
| struct skl_pipe_fmt *cur_fmt; | |
| struct skl_pipe_fmt *next_fmt; | |
| int i; | |
| if (pipe->nr_cfgs <= 1) | |
| return false; | |
| if (pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) | |
| return true; | |
| for (i = 0; i < pipe->nr_cfgs - 1; i++) { | |
| if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) { | |
| cur_fmt = &pipe->configs[i].out_fmt; | |
| next_fmt = &pipe->configs[i + 1].out_fmt; | |
| } else { | |
| cur_fmt = &pipe->configs[i].in_fmt; | |
| next_fmt = &pipe->configs[i + 1].in_fmt; | |
| } | |
| if (!CHECK_HW_PARAMS(cur_fmt->channels, cur_fmt->freq, | |
| cur_fmt->bps, | |
| next_fmt->channels, | |
| next_fmt->freq, | |
| next_fmt->bps)) | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Here, we select pipe format based on the pipe type and pipe | |
| * direction to determine the current config index for the pipeline. | |
| * The config index is then used to select proper module resources. | |
| * Intermediate pipes currently have a fixed format hence we select the | |
| * 0th configuratation by default for such pipes. | |
| */ | |
| static int | |
| skl_tplg_get_pipe_config(struct skl_dev *skl, struct skl_module_cfg *mconfig) | |
| { | |
| struct skl_pipe *pipe = mconfig->pipe; | |
| struct skl_pipe_params *params = pipe->p_params; | |
| struct skl_path_config *pconfig = &pipe->configs[0]; | |
| struct skl_pipe_fmt *fmt = NULL; | |
| bool in_fmt = false; | |
| int i; | |
| if (pipe->nr_cfgs == 0) { | |
| pipe->cur_config_idx = 0; | |
| return 0; | |
| } | |
| if (skl_tplg_is_multi_fmt(skl, pipe)) { | |
| pipe->cur_config_idx = pipe->pipe_config_idx; | |
| pipe->memory_pages = pconfig->mem_pages; | |
| dev_dbg(skl->dev, "found pipe config idx:%d\n", | |
| pipe->cur_config_idx); | |
| return 0; | |
| } | |
| if (pipe->conn_type == SKL_PIPE_CONN_TYPE_NONE || pipe->nr_cfgs == 1) { | |
| dev_dbg(skl->dev, "No conn_type or just 1 pathcfg, taking 0th for %d\n", | |
| pipe->ppl_id); | |
| pipe->cur_config_idx = 0; | |
| pipe->memory_pages = pconfig->mem_pages; | |
| return 0; | |
| } | |
| if ((pipe->conn_type == SKL_PIPE_CONN_TYPE_FE && | |
| pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) || | |
| (pipe->conn_type == SKL_PIPE_CONN_TYPE_BE && | |
| pipe->direction == SNDRV_PCM_STREAM_CAPTURE)) | |
| in_fmt = true; | |
| for (i = 0; i < pipe->nr_cfgs; i++) { | |
| pconfig = &pipe->configs[i]; | |
| if (in_fmt) | |
| fmt = &pconfig->in_fmt; | |
| else | |
| fmt = &pconfig->out_fmt; | |
| if (CHECK_HW_PARAMS(params->ch, params->s_freq, params->s_fmt, | |
| fmt->channels, fmt->freq, fmt->bps)) { | |
| pipe->cur_config_idx = i; | |
| pipe->memory_pages = pconfig->mem_pages; | |
| dev_dbg(skl->dev, "Using pipe config: %d\n", i); | |
| return 0; | |
| } | |
| } | |
| dev_err(skl->dev, "Invalid pipe config: %d %d %d for pipe: %d\n", | |
| params->ch, params->s_freq, params->s_fmt, pipe->ppl_id); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Mixer module represents a pipeline. So in the Pre-PMU event of mixer we | |
| * need create the pipeline. So we do following: | |
| * - Create the pipeline | |
| * - Initialize the modules in pipeline | |
| * - finally bind all modules together | |
| */ | |
| static int skl_tplg_mixer_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| int ret; | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct skl_pipe_module *w_module; | |
| struct skl_pipe *s_pipe = mconfig->pipe; | |
| struct skl_module_cfg *src_module = NULL, *dst_module, *module; | |
| struct skl_module_deferred_bind *modules; | |
| ret = skl_tplg_get_pipe_config(skl, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * Create a list of modules for pipe. | |
| * This list contains modules from source to sink | |
| */ | |
| ret = skl_create_pipeline(skl, mconfig->pipe); | |
| if (ret < 0) | |
| return ret; | |
| /* Init all pipe modules from source to sink */ | |
| ret = skl_tplg_init_pipe_modules(skl, s_pipe); | |
| if (ret < 0) | |
| return ret; | |
| /* Bind modules from source to sink */ | |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { | |
| dst_module = w_module->w->priv; | |
| if (src_module == NULL) { | |
| src_module = dst_module; | |
| continue; | |
| } | |
| ret = skl_bind_modules(skl, src_module, dst_module); | |
| if (ret < 0) | |
| return ret; | |
| src_module = dst_module; | |
| } | |
| /* | |
| * When the destination module is initialized, check for these modules | |
| * in deferred bind list. If found, bind them. | |
| */ | |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { | |
| if (list_empty(&skl->bind_list)) | |
| break; | |
| list_for_each_entry(modules, &skl->bind_list, node) { | |
| module = w_module->w->priv; | |
| if (modules->dst == module) | |
| skl_bind_modules(skl, modules->src, | |
| modules->dst); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int skl_fill_sink_instance_id(struct skl_dev *skl, u32 *params, | |
| int size, struct skl_module_cfg *mcfg) | |
| { | |
| int i, pvt_id; | |
| if (mcfg->m_type == SKL_MODULE_TYPE_KPB) { | |
| struct skl_kpb_params *kpb_params = | |
| (struct skl_kpb_params *)params; | |
| struct skl_mod_inst_map *inst = kpb_params->u.map; | |
| for (i = 0; i < kpb_params->num_modules; i++) { | |
| pvt_id = skl_get_pvt_instance_id_map(skl, inst->mod_id, | |
| inst->inst_id); | |
| if (pvt_id < 0) | |
| return -EINVAL; | |
| inst->inst_id = pvt_id; | |
| inst++; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Some modules require params to be set after the module is bound to | |
| * all pins connected. | |
| * | |
| * The module provider initializes set_param flag for such modules and we | |
| * send params after binding | |
| */ | |
| static int skl_tplg_set_module_bind_params(struct snd_soc_dapm_widget *w, | |
| struct skl_module_cfg *mcfg, struct skl_dev *skl) | |
| { | |
| int i, ret; | |
| struct skl_module_cfg *mconfig = w->priv; | |
| const struct snd_kcontrol_new *k; | |
| struct soc_bytes_ext *sb; | |
| struct skl_algo_data *bc; | |
| struct skl_specific_cfg *sp_cfg; | |
| u32 *params; | |
| /* | |
| * check all out/in pins are in bind state. | |
| * if so set the module param | |
| */ | |
| for (i = 0; i < mcfg->module->max_output_pins; i++) { | |
| if (mcfg->m_out_pin[i].pin_state != SKL_PIN_BIND_DONE) | |
| return 0; | |
| } | |
| for (i = 0; i < mcfg->module->max_input_pins; i++) { | |
| if (mcfg->m_in_pin[i].pin_state != SKL_PIN_BIND_DONE) | |
| return 0; | |
| } | |
| if (mconfig->formats_config[SKL_PARAM_BIND].caps_size > 0 && | |
| mconfig->formats_config[SKL_PARAM_BIND].set_params == | |
| SKL_PARAM_BIND) { | |
| sp_cfg = &mconfig->formats_config[SKL_PARAM_BIND]; | |
| ret = skl_set_module_params(skl, sp_cfg->caps, | |
| sp_cfg->caps_size, | |
| sp_cfg->param_id, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| for (i = 0; i < w->num_kcontrols; i++) { | |
| k = &w->kcontrol_news[i]; | |
| if (k->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { | |
| sb = (void *) k->private_value; | |
| bc = (struct skl_algo_data *)sb->dobj.private; | |
| if (bc->set_params == SKL_PARAM_BIND) { | |
| params = kmemdup(bc->params, bc->max, GFP_KERNEL); | |
| if (!params) | |
| return -ENOMEM; | |
| skl_fill_sink_instance_id(skl, params, bc->max, | |
| mconfig); | |
| ret = skl_set_module_params(skl, params, | |
| bc->max, bc->param_id, mconfig); | |
| kfree(params); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static int skl_get_module_id(struct skl_dev *skl, guid_t *uuid) | |
| { | |
| struct uuid_module *module; | |
| list_for_each_entry(module, &skl->uuid_list, list) { | |
| if (guid_equal(uuid, &module->uuid)) | |
| return module->id; | |
| } | |
| return -EINVAL; | |
| } | |
| static int skl_tplg_find_moduleid_from_uuid(struct skl_dev *skl, | |
| const struct snd_kcontrol_new *k) | |
| { | |
| struct soc_bytes_ext *sb = (void *) k->private_value; | |
| struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private; | |
| struct skl_kpb_params *uuid_params, *params; | |
| struct hdac_bus *bus = skl_to_bus(skl); | |
| int i, size, module_id; | |
| if (bc->set_params == SKL_PARAM_BIND && bc->max) { | |
| uuid_params = (struct skl_kpb_params *)bc->params; | |
| size = struct_size(params, u.map, uuid_params->num_modules); | |
| params = devm_kzalloc(bus->dev, size, GFP_KERNEL); | |
| if (!params) | |
| return -ENOMEM; | |
| params->num_modules = uuid_params->num_modules; | |
| for (i = 0; i < uuid_params->num_modules; i++) { | |
| module_id = skl_get_module_id(skl, | |
| &uuid_params->u.map_uuid[i].mod_uuid); | |
| if (module_id < 0) { | |
| devm_kfree(bus->dev, params); | |
| return -EINVAL; | |
| } | |
| params->u.map[i].mod_id = module_id; | |
| params->u.map[i].inst_id = | |
| uuid_params->u.map_uuid[i].inst_id; | |
| } | |
| devm_kfree(bus->dev, bc->params); | |
| bc->params = (char *)params; | |
| bc->max = size; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Retrieve the module id from UUID mentioned in the | |
| * post bind params | |
| */ | |
| void skl_tplg_add_moduleid_in_bind_params(struct skl_dev *skl, | |
| struct snd_soc_dapm_widget *w) | |
| { | |
| struct skl_module_cfg *mconfig = w->priv; | |
| int i; | |
| /* | |
| * Post bind params are used for only for KPB | |
| * to set copier instances to drain the data | |
| * in fast mode | |
| */ | |
| if (mconfig->m_type != SKL_MODULE_TYPE_KPB) | |
| return; | |
| for (i = 0; i < w->num_kcontrols; i++) | |
| if ((w->kcontrol_news[i].access & | |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) && | |
| (skl_tplg_find_moduleid_from_uuid(skl, | |
| &w->kcontrol_news[i]) < 0)) | |
| dev_err(skl->dev, | |
| "%s: invalid kpb post bind params\n", | |
| __func__); | |
| } | |
| static int skl_tplg_module_add_deferred_bind(struct skl_dev *skl, | |
| struct skl_module_cfg *src, struct skl_module_cfg *dst) | |
| { | |
| struct skl_module_deferred_bind *m_list, *modules; | |
| int i; | |
| /* only supported for module with static pin connection */ | |
| for (i = 0; i < dst->module->max_input_pins; i++) { | |
| struct skl_module_pin *pin = &dst->m_in_pin[i]; | |
| if (pin->is_dynamic) | |
| continue; | |
| if ((pin->id.module_id == src->id.module_id) && | |
| (pin->id.instance_id == src->id.instance_id)) { | |
| if (!list_empty(&skl->bind_list)) { | |
| list_for_each_entry(modules, &skl->bind_list, node) { | |
| if (modules->src == src && modules->dst == dst) | |
| return 0; | |
| } | |
| } | |
| m_list = kzalloc(sizeof(*m_list), GFP_KERNEL); | |
| if (!m_list) | |
| return -ENOMEM; | |
| m_list->src = src; | |
| m_list->dst = dst; | |
| list_add(&m_list->node, &skl->bind_list); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_bind_sinks(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl, | |
| struct snd_soc_dapm_widget *src_w, | |
| struct skl_module_cfg *src_mconfig) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| struct snd_soc_dapm_widget *sink = NULL, *next_sink = NULL; | |
| struct skl_module_cfg *sink_mconfig; | |
| int ret; | |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { | |
| if (!p->connect) | |
| continue; | |
| dev_dbg(skl->dev, | |
| "%s: src widget=%s\n", __func__, w->name); | |
| dev_dbg(skl->dev, | |
| "%s: sink widget=%s\n", __func__, p->sink->name); | |
| next_sink = p->sink; | |
| if (!is_skl_dsp_widget_type(p->sink, skl->dev)) | |
| return skl_tplg_bind_sinks(p->sink, skl, src_w, src_mconfig); | |
| /* | |
| * here we will check widgets in sink pipelines, so that | |
| * can be any widgets type and we are only interested if | |
| * they are ones used for SKL so check that first | |
| */ | |
| if ((p->sink->priv != NULL) && | |
| is_skl_dsp_widget_type(p->sink, skl->dev)) { | |
| sink = p->sink; | |
| sink_mconfig = sink->priv; | |
| /* | |
| * Modules other than PGA leaf can be connected | |
| * directly or via switch to a module in another | |
| * pipeline. EX: reference path | |
| * when the path is enabled, the dst module that needs | |
| * to be bound may not be initialized. if the module is | |
| * not initialized, add these modules in the deferred | |
| * bind list and when the dst module is initialised, | |
| * bind this module to the dst_module in deferred list. | |
| */ | |
| if (((src_mconfig->m_state == SKL_MODULE_INIT_DONE) | |
| && (sink_mconfig->m_state == SKL_MODULE_UNINIT))) { | |
| ret = skl_tplg_module_add_deferred_bind(skl, | |
| src_mconfig, sink_mconfig); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| if (src_mconfig->m_state == SKL_MODULE_UNINIT || | |
| sink_mconfig->m_state == SKL_MODULE_UNINIT) | |
| continue; | |
| /* Bind source to sink, mixin is always source */ | |
| ret = skl_bind_modules(skl, src_mconfig, sink_mconfig); | |
| if (ret) | |
| return ret; | |
| /* set module params after bind */ | |
| skl_tplg_set_module_bind_params(src_w, | |
| src_mconfig, skl); | |
| skl_tplg_set_module_bind_params(sink, | |
| sink_mconfig, skl); | |
| /* Start sinks pipe first */ | |
| if (sink_mconfig->pipe->state != SKL_PIPE_STARTED) { | |
| if (sink_mconfig->pipe->conn_type != | |
| SKL_PIPE_CONN_TYPE_FE) | |
| ret = skl_run_pipe(skl, | |
| sink_mconfig->pipe); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| } | |
| if (!sink && next_sink) | |
| return skl_tplg_bind_sinks(next_sink, skl, src_w, src_mconfig); | |
| return 0; | |
| } | |
| /* | |
| * A PGA represents a module in a pipeline. So in the Pre-PMU event of PGA | |
| * we need to do following: | |
| * - Bind to sink pipeline | |
| * Since the sink pipes can be running and we don't get mixer event on | |
| * connect for already running mixer, we need to find the sink pipes | |
| * here and bind to them. This way dynamic connect works. | |
| * - Start sink pipeline, if not running | |
| * - Then run current pipe | |
| */ | |
| static int skl_tplg_pga_dapm_pre_pmu_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *src_mconfig; | |
| int ret = 0; | |
| src_mconfig = w->priv; | |
| /* | |
| * find which sink it is connected to, bind with the sink, | |
| * if sink is not started, start sink pipe first, then start | |
| * this pipe | |
| */ | |
| ret = skl_tplg_bind_sinks(w, skl, w, src_mconfig); | |
| if (ret) | |
| return ret; | |
| /* Start source pipe last after starting all sinks */ | |
| if (src_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) | |
| return skl_run_pipe(skl, src_mconfig->pipe); | |
| return 0; | |
| } | |
| static struct snd_soc_dapm_widget *skl_get_src_dsp_widget( | |
| struct snd_soc_dapm_widget *w, struct skl_dev *skl) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| struct snd_soc_dapm_widget *src_w = NULL; | |
| snd_soc_dapm_widget_for_each_source_path(w, p) { | |
| src_w = p->source; | |
| if (!p->connect) | |
| continue; | |
| dev_dbg(skl->dev, "sink widget=%s\n", w->name); | |
| dev_dbg(skl->dev, "src widget=%s\n", p->source->name); | |
| /* | |
| * here we will check widgets in sink pipelines, so that can | |
| * be any widgets type and we are only interested if they are | |
| * ones used for SKL so check that first | |
| */ | |
| if ((p->source->priv != NULL) && | |
| is_skl_dsp_widget_type(p->source, skl->dev)) { | |
| return p->source; | |
| } | |
| } | |
| if (src_w != NULL) | |
| return skl_get_src_dsp_widget(src_w, skl); | |
| return NULL; | |
| } | |
| /* | |
| * in the Post-PMU event of mixer we need to do following: | |
| * - Check if this pipe is running | |
| * - if not, then | |
| * - bind this pipeline to its source pipeline | |
| * if source pipe is already running, this means it is a dynamic | |
| * connection and we need to bind only to that pipe | |
| * - start this pipeline | |
| */ | |
| static int skl_tplg_mixer_dapm_post_pmu_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| int ret = 0; | |
| struct snd_soc_dapm_widget *source, *sink; | |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; | |
| int src_pipe_started = 0; | |
| sink = w; | |
| sink_mconfig = sink->priv; | |
| /* | |
| * If source pipe is already started, that means source is driving | |
| * one more sink before this sink got connected, Since source is | |
| * started, bind this sink to source and start this pipe. | |
| */ | |
| source = skl_get_src_dsp_widget(w, skl); | |
| if (source != NULL) { | |
| src_mconfig = source->priv; | |
| sink_mconfig = sink->priv; | |
| src_pipe_started = 1; | |
| /* | |
| * check pipe state, then no need to bind or start the | |
| * pipe | |
| */ | |
| if (src_mconfig->pipe->state != SKL_PIPE_STARTED) | |
| src_pipe_started = 0; | |
| } | |
| if (src_pipe_started) { | |
| ret = skl_bind_modules(skl, src_mconfig, sink_mconfig); | |
| if (ret) | |
| return ret; | |
| /* set module params after bind */ | |
| skl_tplg_set_module_bind_params(source, src_mconfig, skl); | |
| skl_tplg_set_module_bind_params(sink, sink_mconfig, skl); | |
| if (sink_mconfig->pipe->conn_type != SKL_PIPE_CONN_TYPE_FE) | |
| ret = skl_run_pipe(skl, sink_mconfig->pipe); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * in the Pre-PMD event of mixer we need to do following: | |
| * - Stop the pipe | |
| * - find the source connections and remove that from dapm_path_list | |
| * - unbind with source pipelines if still connected | |
| */ | |
| static int skl_tplg_mixer_dapm_pre_pmd_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; | |
| int ret = 0, i; | |
| sink_mconfig = w->priv; | |
| /* Stop the pipe */ | |
| ret = skl_stop_pipe(skl, sink_mconfig->pipe); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < sink_mconfig->module->max_input_pins; i++) { | |
| if (sink_mconfig->m_in_pin[i].pin_state == SKL_PIN_BIND_DONE) { | |
| src_mconfig = sink_mconfig->m_in_pin[i].tgt_mcfg; | |
| if (!src_mconfig) | |
| continue; | |
| ret = skl_unbind_modules(skl, | |
| src_mconfig, sink_mconfig); | |
| } | |
| } | |
| return ret; | |
| } | |
| /* | |
| * in the Post-PMD event of mixer we need to do following: | |
| * - Unbind the modules within the pipeline | |
| * - Delete the pipeline (modules are not required to be explicitly | |
| * deleted, pipeline delete is enough here | |
| */ | |
| static int skl_tplg_mixer_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct skl_pipe_module *w_module; | |
| struct skl_module_cfg *src_module = NULL, *dst_module; | |
| struct skl_pipe *s_pipe = mconfig->pipe; | |
| struct skl_module_deferred_bind *modules, *tmp; | |
| if (s_pipe->state == SKL_PIPE_INVALID) | |
| return -EINVAL; | |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { | |
| if (list_empty(&skl->bind_list)) | |
| break; | |
| src_module = w_module->w->priv; | |
| list_for_each_entry_safe(modules, tmp, &skl->bind_list, node) { | |
| /* | |
| * When the destination module is deleted, Unbind the | |
| * modules from deferred bind list. | |
| */ | |
| if (modules->dst == src_module) { | |
| skl_unbind_modules(skl, modules->src, | |
| modules->dst); | |
| } | |
| /* | |
| * When the source module is deleted, remove this entry | |
| * from the deferred bind list. | |
| */ | |
| if (modules->src == src_module) { | |
| list_del(&modules->node); | |
| modules->src = NULL; | |
| modules->dst = NULL; | |
| kfree(modules); | |
| } | |
| } | |
| } | |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { | |
| dst_module = w_module->w->priv; | |
| if (src_module == NULL) { | |
| src_module = dst_module; | |
| continue; | |
| } | |
| skl_unbind_modules(skl, src_module, dst_module); | |
| src_module = dst_module; | |
| } | |
| skl_delete_pipe(skl, mconfig->pipe); | |
| list_for_each_entry(w_module, &s_pipe->w_list, node) { | |
| src_module = w_module->w->priv; | |
| src_module->m_state = SKL_MODULE_UNINIT; | |
| } | |
| return skl_tplg_unload_pipe_modules(skl, s_pipe); | |
| } | |
| /* | |
| * in the Post-PMD event of PGA we need to do following: | |
| * - Stop the pipeline | |
| * - In source pipe is connected, unbind with source pipelines | |
| */ | |
| static int skl_tplg_pga_dapm_post_pmd_event(struct snd_soc_dapm_widget *w, | |
| struct skl_dev *skl) | |
| { | |
| struct skl_module_cfg *src_mconfig, *sink_mconfig; | |
| int ret = 0, i; | |
| src_mconfig = w->priv; | |
| /* Stop the pipe since this is a mixin module */ | |
| ret = skl_stop_pipe(skl, src_mconfig->pipe); | |
| if (ret) | |
| return ret; | |
| for (i = 0; i < src_mconfig->module->max_output_pins; i++) { | |
| if (src_mconfig->m_out_pin[i].pin_state == SKL_PIN_BIND_DONE) { | |
| sink_mconfig = src_mconfig->m_out_pin[i].tgt_mcfg; | |
| if (!sink_mconfig) | |
| continue; | |
| /* | |
| * This is a connecter and if path is found that means | |
| * unbind between source and sink has not happened yet | |
| */ | |
| ret = skl_unbind_modules(skl, src_mconfig, | |
| sink_mconfig); | |
| } | |
| } | |
| return ret; | |
| } | |
| /* | |
| * In modelling, we assume there will be ONLY one mixer in a pipeline. If a | |
| * second one is required that is created as another pipe entity. | |
| * The mixer is responsible for pipe management and represent a pipeline | |
| * instance | |
| */ | |
| static int skl_tplg_mixer_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *k, int event) | |
| { | |
| struct snd_soc_dapm_context *dapm = w->dapm; | |
| struct skl_dev *skl = get_skl_ctx(dapm->dev); | |
| switch (event) { | |
| case SND_SOC_DAPM_PRE_PMU: | |
| return skl_tplg_mixer_dapm_pre_pmu_event(w, skl); | |
| case SND_SOC_DAPM_POST_PMU: | |
| return skl_tplg_mixer_dapm_post_pmu_event(w, skl); | |
| case SND_SOC_DAPM_PRE_PMD: | |
| return skl_tplg_mixer_dapm_pre_pmd_event(w, skl); | |
| case SND_SOC_DAPM_POST_PMD: | |
| return skl_tplg_mixer_dapm_post_pmd_event(w, skl); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * In modelling, we assumed rest of the modules in pipeline are PGA. But we | |
| * are interested in last PGA (leaf PGA) in a pipeline to disconnect with | |
| * the sink when it is running (two FE to one BE or one FE to two BE) | |
| * scenarios | |
| */ | |
| static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *k, int event) | |
| { | |
| struct snd_soc_dapm_context *dapm = w->dapm; | |
| struct skl_dev *skl = get_skl_ctx(dapm->dev); | |
| switch (event) { | |
| case SND_SOC_DAPM_PRE_PMU: | |
| return skl_tplg_pga_dapm_pre_pmu_event(w, skl); | |
| case SND_SOC_DAPM_POST_PMD: | |
| return skl_tplg_pga_dapm_post_pmd_event(w, skl); | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_multi_config_set_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol, | |
| bool is_set) | |
| { | |
| struct snd_soc_component *component = | |
| snd_soc_kcontrol_component(kcontrol); | |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(component); | |
| struct skl_dev *skl = bus_to_skl(bus); | |
| struct skl_pipeline *ppl; | |
| struct skl_pipe *pipe = NULL; | |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; | |
| u32 *pipe_id; | |
| if (!ec) | |
| return -EINVAL; | |
| if (is_set && ucontrol->value.enumerated.item[0] > ec->items) | |
| return -EINVAL; | |
| pipe_id = ec->dobj.private; | |
| list_for_each_entry(ppl, &skl->ppl_list, node) { | |
| if (ppl->pipe->ppl_id == *pipe_id) { | |
| pipe = ppl->pipe; | |
| break; | |
| } | |
| } | |
| if (!pipe) | |
| return -EIO; | |
| if (is_set) | |
| pipe->pipe_config_idx = ucontrol->value.enumerated.item[0]; | |
| else | |
| ucontrol->value.enumerated.item[0] = pipe->pipe_config_idx; | |
| return 0; | |
| } | |
| static int skl_tplg_multi_config_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); | |
| } | |
| static int skl_tplg_multi_config_set(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); | |
| } | |
| static int skl_tplg_multi_config_get_dmic(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, false); | |
| } | |
| static int skl_tplg_multi_config_set_dmic(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| return skl_tplg_multi_config_set_get(kcontrol, ucontrol, true); | |
| } | |
| static int skl_tplg_tlv_control_get(struct snd_kcontrol *kcontrol, | |
| unsigned int __user *data, unsigned int size) | |
| { | |
| struct soc_bytes_ext *sb = | |
| (struct soc_bytes_ext *)kcontrol->private_value; | |
| struct skl_algo_data *bc = (struct skl_algo_data *)sb->dobj.private; | |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct skl_dev *skl = get_skl_ctx(w->dapm->dev); | |
| if (w->power) | |
| skl_get_module_params(skl, (u32 *)bc->params, | |
| bc->size, bc->param_id, mconfig); | |
| /* decrement size for TLV header */ | |
| size -= 2 * sizeof(u32); | |
| /* check size as we don't want to send kernel data */ | |
| if (size > bc->max) | |
| size = bc->max; | |
| if (bc->params) { | |
| if (copy_to_user(data, &bc->param_id, sizeof(u32))) | |
| return -EFAULT; | |
| if (copy_to_user(data + 1, &size, sizeof(u32))) | |
| return -EFAULT; | |
| if (copy_to_user(data + 2, bc->params, size)) | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| #define SKL_PARAM_VENDOR_ID 0xff | |
| static int skl_tplg_tlv_control_set(struct snd_kcontrol *kcontrol, | |
| const unsigned int __user *data, unsigned int size) | |
| { | |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct soc_bytes_ext *sb = | |
| (struct soc_bytes_ext *)kcontrol->private_value; | |
| struct skl_algo_data *ac = (struct skl_algo_data *)sb->dobj.private; | |
| struct skl_dev *skl = get_skl_ctx(w->dapm->dev); | |
| if (ac->params) { | |
| if (size > ac->max) | |
| return -EINVAL; | |
| ac->size = size; | |
| if (copy_from_user(ac->params, data, size)) | |
| return -EFAULT; | |
| if (w->power) | |
| return skl_set_module_params(skl, | |
| (u32 *)ac->params, ac->size, | |
| ac->param_id, mconfig); | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_mic_control_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; | |
| u32 ch_type = *((u32 *)ec->dobj.private); | |
| if (mconfig->dmic_ch_type == ch_type) | |
| ucontrol->value.enumerated.item[0] = | |
| mconfig->dmic_ch_combo_index; | |
| else | |
| ucontrol->value.enumerated.item[0] = 0; | |
| return 0; | |
| } | |
| static int skl_fill_mic_sel_params(struct skl_module_cfg *mconfig, | |
| struct skl_mic_sel_config *mic_cfg, struct device *dev) | |
| { | |
| struct skl_specific_cfg *sp_cfg = | |
| &mconfig->formats_config[SKL_PARAM_INIT]; | |
| sp_cfg->caps_size = sizeof(struct skl_mic_sel_config); | |
| sp_cfg->set_params = SKL_PARAM_SET; | |
| sp_cfg->param_id = 0x00; | |
| if (!sp_cfg->caps) { | |
| sp_cfg->caps = devm_kzalloc(dev, sp_cfg->caps_size, GFP_KERNEL); | |
| if (!sp_cfg->caps) | |
| return -ENOMEM; | |
| } | |
| mic_cfg->mic_switch = SKL_MIC_SEL_SWITCH; | |
| mic_cfg->flags = 0; | |
| memcpy(sp_cfg->caps, mic_cfg, sp_cfg->caps_size); | |
| return 0; | |
| } | |
| static int skl_tplg_mic_control_set(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol); | |
| struct skl_module_cfg *mconfig = w->priv; | |
| struct skl_mic_sel_config mic_cfg = {0}; | |
| struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value; | |
| u32 ch_type = *((u32 *)ec->dobj.private); | |
| const int *list; | |
| u8 in_ch, out_ch, index; | |
| mconfig->dmic_ch_type = ch_type; | |
| mconfig->dmic_ch_combo_index = ucontrol->value.enumerated.item[0]; | |
| /* enum control index 0 is INVALID, so no channels to be set */ | |
| if (mconfig->dmic_ch_combo_index == 0) | |
| return 0; | |
| /* No valid channel selection map for index 0, so offset by 1 */ | |
| index = mconfig->dmic_ch_combo_index - 1; | |
| switch (ch_type) { | |
| case SKL_CH_MONO: | |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_mono_list)) | |
| return -EINVAL; | |
| list = &mic_mono_list[index]; | |
| break; | |
| case SKL_CH_STEREO: | |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_stereo_list)) | |
| return -EINVAL; | |
| list = mic_stereo_list[index]; | |
| break; | |
| case SKL_CH_TRIO: | |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_trio_list)) | |
| return -EINVAL; | |
| list = mic_trio_list[index]; | |
| break; | |
| case SKL_CH_QUATRO: | |
| if (mconfig->dmic_ch_combo_index > ARRAY_SIZE(mic_quatro_list)) | |
| return -EINVAL; | |
| list = mic_quatro_list[index]; | |
| break; | |
| default: | |
| dev_err(w->dapm->dev, | |
| "Invalid channel %d for mic_select module\n", | |
| ch_type); | |
| return -EINVAL; | |
| } | |
| /* channel type enum map to number of chanels for that type */ | |
| for (out_ch = 0; out_ch < ch_type; out_ch++) { | |
| in_ch = list[out_ch]; | |
| mic_cfg.blob[out_ch][in_ch] = SKL_DEFAULT_MIC_SEL_GAIN; | |
| } | |
| return skl_fill_mic_sel_params(mconfig, &mic_cfg, w->dapm->dev); | |
| } | |
| /* | |
| * Fill the dma id for host and link. In case of passthrough | |
| * pipeline, this will both host and link in the same | |
| * pipeline, so need to copy the link and host based on dev_type | |
| */ | |
| static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg, | |
| struct skl_pipe_params *params) | |
| { | |
| struct skl_pipe *pipe = mcfg->pipe; | |
| if (pipe->passthru) { | |
| switch (mcfg->dev_type) { | |
| case SKL_DEVICE_HDALINK: | |
| pipe->p_params->link_dma_id = params->link_dma_id; | |
| pipe->p_params->link_index = params->link_index; | |
| pipe->p_params->link_bps = params->link_bps; | |
| break; | |
| case SKL_DEVICE_HDAHOST: | |
| pipe->p_params->host_dma_id = params->host_dma_id; | |
| pipe->p_params->host_bps = params->host_bps; | |
| break; | |
| default: | |
| break; | |
| } | |
| pipe->p_params->s_fmt = params->s_fmt; | |
| pipe->p_params->ch = params->ch; | |
| pipe->p_params->s_freq = params->s_freq; | |
| pipe->p_params->stream = params->stream; | |
| pipe->p_params->format = params->format; | |
| } else { | |
| memcpy(pipe->p_params, params, sizeof(*params)); | |
| } | |
| } | |
| /* | |
| * The FE params are passed by hw_params of the DAI. | |
| * On hw_params, the params are stored in Gateway module of the FE and we | |
| * need to calculate the format in DSP module configuration, that | |
| * conversion is done here | |
| */ | |
| int skl_tplg_update_pipe_params(struct device *dev, | |
| struct skl_module_cfg *mconfig, | |
| struct skl_pipe_params *params) | |
| { | |
| struct skl_module_res *res; | |
| struct skl_dev *skl = get_skl_ctx(dev); | |
| struct skl_module_fmt *format = NULL; | |
| u8 cfg_idx = mconfig->pipe->cur_config_idx; | |
| res = &mconfig->module->resources[mconfig->res_idx]; | |
| skl_tplg_fill_dma_id(mconfig, params); | |
| mconfig->fmt_idx = mconfig->mod_cfg[cfg_idx].fmt_idx; | |
| mconfig->res_idx = mconfig->mod_cfg[cfg_idx].res_idx; | |
| if (skl->nr_modules) | |
| return 0; | |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) | |
| format = &mconfig->module->formats[mconfig->fmt_idx].inputs[0].fmt; | |
| else | |
| format = &mconfig->module->formats[mconfig->fmt_idx].outputs[0].fmt; | |
| /* set the hw_params */ | |
| format->s_freq = params->s_freq; | |
| format->channels = params->ch; | |
| format->valid_bit_depth = skl_get_bit_depth(params->s_fmt); | |
| /* | |
| * 16 bit is 16 bit container whereas 24 bit is in 32 bit | |
| * container so update bit depth accordingly | |
| */ | |
| switch (format->valid_bit_depth) { | |
| case SKL_DEPTH_16BIT: | |
| format->bit_depth = format->valid_bit_depth; | |
| break; | |
| case SKL_DEPTH_24BIT: | |
| case SKL_DEPTH_32BIT: | |
| format->bit_depth = SKL_DEPTH_32BIT; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid bit depth %x for pipe\n", | |
| format->valid_bit_depth); | |
| return -EINVAL; | |
| } | |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
| res->ibs = (format->s_freq / 1000) * | |
| (format->channels) * | |
| (format->bit_depth >> 3); | |
| } else { | |
| res->obs = (format->s_freq / 1000) * | |
| (format->channels) * | |
| (format->bit_depth >> 3); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Query the module config for the FE DAI | |
| * This is used to find the hw_params set for that DAI and apply to FE | |
| * pipeline | |
| */ | |
| struct skl_module_cfg * | |
| skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream) | |
| { | |
| struct snd_soc_dapm_widget *w; | |
| struct snd_soc_dapm_path *p = NULL; | |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
| w = dai->playback_widget; | |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { | |
| if (p->connect && p->sink->power && | |
| !is_skl_dsp_widget_type(p->sink, dai->dev)) | |
| continue; | |
| if (p->sink->priv) { | |
| dev_dbg(dai->dev, "set params for %s\n", | |
| p->sink->name); | |
| return p->sink->priv; | |
| } | |
| } | |
| } else { | |
| w = dai->capture_widget; | |
| snd_soc_dapm_widget_for_each_source_path(w, p) { | |
| if (p->connect && p->source->power && | |
| !is_skl_dsp_widget_type(p->source, dai->dev)) | |
| continue; | |
| if (p->source->priv) { | |
| dev_dbg(dai->dev, "set params for %s\n", | |
| p->source->name); | |
| return p->source->priv; | |
| } | |
| } | |
| } | |
| return NULL; | |
| } | |
| static struct skl_module_cfg *skl_get_mconfig_pb_cpr( | |
| struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| struct skl_module_cfg *mconfig = NULL; | |
| snd_soc_dapm_widget_for_each_source_path(w, p) { | |
| if (w->endpoints[SND_SOC_DAPM_DIR_OUT] > 0) { | |
| if (p->connect && | |
| (p->sink->id == snd_soc_dapm_aif_out) && | |
| p->source->priv) { | |
| mconfig = p->source->priv; | |
| return mconfig; | |
| } | |
| mconfig = skl_get_mconfig_pb_cpr(dai, p->source); | |
| if (mconfig) | |
| return mconfig; | |
| } | |
| } | |
| return mconfig; | |
| } | |
| static struct skl_module_cfg *skl_get_mconfig_cap_cpr( | |
| struct snd_soc_dai *dai, struct snd_soc_dapm_widget *w) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| struct skl_module_cfg *mconfig = NULL; | |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { | |
| if (w->endpoints[SND_SOC_DAPM_DIR_IN] > 0) { | |
| if (p->connect && | |
| (p->source->id == snd_soc_dapm_aif_in) && | |
| p->sink->priv) { | |
| mconfig = p->sink->priv; | |
| return mconfig; | |
| } | |
| mconfig = skl_get_mconfig_cap_cpr(dai, p->sink); | |
| if (mconfig) | |
| return mconfig; | |
| } | |
| } | |
| return mconfig; | |
| } | |
| struct skl_module_cfg * | |
| skl_tplg_be_get_cpr_module(struct snd_soc_dai *dai, int stream) | |
| { | |
| struct snd_soc_dapm_widget *w; | |
| struct skl_module_cfg *mconfig; | |
| if (stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
| w = dai->playback_widget; | |
| mconfig = skl_get_mconfig_pb_cpr(dai, w); | |
| } else { | |
| w = dai->capture_widget; | |
| mconfig = skl_get_mconfig_cap_cpr(dai, w); | |
| } | |
| return mconfig; | |
| } | |
| static u8 skl_tplg_be_link_type(int dev_type) | |
| { | |
| int ret; | |
| switch (dev_type) { | |
| case SKL_DEVICE_BT: | |
| ret = NHLT_LINK_SSP; | |
| break; | |
| case SKL_DEVICE_DMIC: | |
| ret = NHLT_LINK_DMIC; | |
| break; | |
| case SKL_DEVICE_I2S: | |
| ret = NHLT_LINK_SSP; | |
| break; | |
| case SKL_DEVICE_HDALINK: | |
| ret = NHLT_LINK_HDA; | |
| break; | |
| default: | |
| ret = NHLT_LINK_INVALID; | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Fill the BE gateway parameters | |
| * The BE gateway expects a blob of parameters which are kept in the ACPI | |
| * NHLT blob, so query the blob for interface type (i2s/pdm) and instance. | |
| * The port can have multiple settings so pick based on the pipeline | |
| * parameters | |
| */ | |
| static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai, | |
| struct skl_module_cfg *mconfig, | |
| struct skl_pipe_params *params) | |
| { | |
| struct nhlt_specific_cfg *cfg; | |
| struct skl_pipe *pipe = mconfig->pipe; | |
| struct skl_pipe_fmt *pipe_fmt; | |
| struct skl_dev *skl = get_skl_ctx(dai->dev); | |
| int link_type = skl_tplg_be_link_type(mconfig->dev_type); | |
| u8 dev_type = skl_tplg_be_dev_type(mconfig->dev_type); | |
| skl_tplg_fill_dma_id(mconfig, params); | |
| if (link_type == NHLT_LINK_HDA) | |
| return 0; | |
| if (pipe->direction == SNDRV_PCM_STREAM_PLAYBACK) | |
| pipe_fmt = &pipe->configs[pipe->pipe_config_idx].out_fmt; | |
| else | |
| pipe_fmt = &pipe->configs[pipe->pipe_config_idx].in_fmt; | |
| /* update the blob based on virtual bus_id*/ | |
| cfg = skl_get_ep_blob(skl, mconfig->vbus_id, link_type, | |
| pipe_fmt->bps, pipe_fmt->channels, | |
| pipe_fmt->freq, pipe->direction, | |
| dev_type); | |
| if (cfg) { | |
| mconfig->formats_config[SKL_PARAM_INIT].caps_size = cfg->size; | |
| mconfig->formats_config[SKL_PARAM_INIT].caps = (u32 *)&cfg->caps; | |
| } else { | |
| dev_err(dai->dev, "Blob NULL for id:%d type:%d dirn:%d ch:%d, freq:%d, fmt:%d\n", | |
| mconfig->vbus_id, link_type, params->stream, | |
| params->ch, params->s_freq, params->s_fmt); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai, | |
| struct snd_soc_dapm_widget *w, | |
| struct skl_pipe_params *params) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| int ret = -EIO; | |
| snd_soc_dapm_widget_for_each_source_path(w, p) { | |
| if (p->connect && is_skl_dsp_widget_type(p->source, dai->dev) && | |
| p->source->priv) { | |
| ret = skl_tplg_be_fill_pipe_params(dai, | |
| p->source->priv, params); | |
| if (ret < 0) | |
| return ret; | |
| } else { | |
| ret = skl_tplg_be_set_src_pipe_params(dai, | |
| p->source, params); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai, | |
| struct snd_soc_dapm_widget *w, struct skl_pipe_params *params) | |
| { | |
| struct snd_soc_dapm_path *p; | |
| int ret = -EIO; | |
| snd_soc_dapm_widget_for_each_sink_path(w, p) { | |
| if (p->connect && is_skl_dsp_widget_type(p->sink, dai->dev) && | |
| p->sink->priv) { | |
| ret = skl_tplg_be_fill_pipe_params(dai, | |
| p->sink->priv, params); | |
| if (ret < 0) | |
| return ret; | |
| } else { | |
| ret = skl_tplg_be_set_sink_pipe_params( | |
| dai, p->sink, params); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| /* | |
| * BE hw_params can be a source parameters (capture) or sink parameters | |
| * (playback). Based on sink and source we need to either find the source | |
| * list or the sink list and set the pipeline parameters | |
| */ | |
| int skl_tplg_be_update_params(struct snd_soc_dai *dai, | |
| struct skl_pipe_params *params) | |
| { | |
| struct snd_soc_dapm_widget *w; | |
| if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) { | |
| w = dai->playback_widget; | |
| return skl_tplg_be_set_src_pipe_params(dai, w, params); | |
| } else { | |
| w = dai->capture_widget; | |
| return skl_tplg_be_set_sink_pipe_params(dai, w, params); | |
| } | |
| return 0; | |
| } | |
| static const struct snd_soc_tplg_widget_events skl_tplg_widget_ops[] = { | |
| {SKL_MIXER_EVENT, skl_tplg_mixer_event}, | |
| {SKL_VMIXER_EVENT, skl_tplg_mixer_event}, | |
| {SKL_PGA_EVENT, skl_tplg_pga_event}, | |
| }; | |
| static const struct snd_soc_tplg_bytes_ext_ops skl_tlv_ops[] = { | |
| {SKL_CONTROL_TYPE_BYTE_TLV, skl_tplg_tlv_control_get, | |
| skl_tplg_tlv_control_set}, | |
| }; | |
| static const struct snd_soc_tplg_kcontrol_ops skl_tplg_kcontrol_ops[] = { | |
| { | |
| .id = SKL_CONTROL_TYPE_MIC_SELECT, | |
| .get = skl_tplg_mic_control_get, | |
| .put = skl_tplg_mic_control_set, | |
| }, | |
| { | |
| .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT, | |
| .get = skl_tplg_multi_config_get, | |
| .put = skl_tplg_multi_config_set, | |
| }, | |
| { | |
| .id = SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC, | |
| .get = skl_tplg_multi_config_get_dmic, | |
| .put = skl_tplg_multi_config_set_dmic, | |
| } | |
| }; | |
| static int skl_tplg_fill_pipe_cfg(struct device *dev, | |
| struct skl_pipe *pipe, u32 tkn, | |
| u32 tkn_val, int conf_idx, int dir) | |
| { | |
| struct skl_pipe_fmt *fmt; | |
| struct skl_path_config *config; | |
| switch (dir) { | |
| case SKL_DIR_IN: | |
| fmt = &pipe->configs[conf_idx].in_fmt; | |
| break; | |
| case SKL_DIR_OUT: | |
| fmt = &pipe->configs[conf_idx].out_fmt; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid direction: %d\n", dir); | |
| return -EINVAL; | |
| } | |
| config = &pipe->configs[conf_idx]; | |
| switch (tkn) { | |
| case SKL_TKN_U32_CFG_FREQ: | |
| fmt->freq = tkn_val; | |
| break; | |
| case SKL_TKN_U8_CFG_CHAN: | |
| fmt->channels = tkn_val; | |
| break; | |
| case SKL_TKN_U8_CFG_BPS: | |
| fmt->bps = tkn_val; | |
| break; | |
| case SKL_TKN_U32_PATH_MEM_PGS: | |
| config->mem_pages = tkn_val; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid token config: %d\n", tkn); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_fill_pipe_tkn(struct device *dev, | |
| struct skl_pipe *pipe, u32 tkn, | |
| u32 tkn_val) | |
| { | |
| switch (tkn) { | |
| case SKL_TKN_U32_PIPE_CONN_TYPE: | |
| pipe->conn_type = tkn_val; | |
| break; | |
| case SKL_TKN_U32_PIPE_PRIORITY: | |
| pipe->pipe_priority = tkn_val; | |
| break; | |
| case SKL_TKN_U32_PIPE_MEM_PGS: | |
| pipe->memory_pages = tkn_val; | |
| break; | |
| case SKL_TKN_U32_PMODE: | |
| pipe->lp_mode = tkn_val; | |
| break; | |
| case SKL_TKN_U32_PIPE_DIRECTION: | |
| pipe->direction = tkn_val; | |
| break; | |
| case SKL_TKN_U32_NUM_CONFIGS: | |
| pipe->nr_cfgs = tkn_val; | |
| break; | |
| default: | |
| dev_err(dev, "Token not handled %d\n", tkn); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Add pipeline by parsing the relevant tokens | |
| * Return an existing pipe if the pipe already exists. | |
| */ | |
| static int skl_tplg_add_pipe(struct device *dev, | |
| struct skl_module_cfg *mconfig, struct skl_dev *skl, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem) | |
| { | |
| struct skl_pipeline *ppl; | |
| struct skl_pipe *pipe; | |
| struct skl_pipe_params *params; | |
| list_for_each_entry(ppl, &skl->ppl_list, node) { | |
| if (ppl->pipe->ppl_id == tkn_elem->value) { | |
| mconfig->pipe = ppl->pipe; | |
| return -EEXIST; | |
| } | |
| } | |
| ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL); | |
| if (!ppl) | |
| return -ENOMEM; | |
| pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL); | |
| if (!pipe) | |
| return -ENOMEM; | |
| params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL); | |
| if (!params) | |
| return -ENOMEM; | |
| pipe->p_params = params; | |
| pipe->ppl_id = tkn_elem->value; | |
| INIT_LIST_HEAD(&pipe->w_list); | |
| ppl->pipe = pipe; | |
| list_add(&ppl->node, &skl->ppl_list); | |
| mconfig->pipe = pipe; | |
| mconfig->pipe->state = SKL_PIPE_INVALID; | |
| return 0; | |
| } | |
| static int skl_tplg_get_uuid(struct device *dev, guid_t *guid, | |
| struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) | |
| { | |
| if (uuid_tkn->token == SKL_TKN_UUID) { | |
| import_guid(guid, uuid_tkn->uuid); | |
| return 0; | |
| } | |
| dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token); | |
| return -EINVAL; | |
| } | |
| static int skl_tplg_fill_pin(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_module_pin *m_pin, | |
| int pin_index) | |
| { | |
| int ret; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_U32_PIN_MOD_ID: | |
| m_pin[pin_index].id.module_id = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_PIN_INST_ID: | |
| m_pin[pin_index].id.instance_id = tkn_elem->value; | |
| break; | |
| case SKL_TKN_UUID: | |
| ret = skl_tplg_get_uuid(dev, &m_pin[pin_index].id.mod_uuid, | |
| (struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| default: | |
| dev_err(dev, "%d Not a pin token\n", tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Parse for pin config specific tokens to fill up the | |
| * module private data | |
| */ | |
| static int skl_tplg_fill_pins_info(struct device *dev, | |
| struct skl_module_cfg *mconfig, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| int dir, int pin_count) | |
| { | |
| int ret; | |
| struct skl_module_pin *m_pin; | |
| switch (dir) { | |
| case SKL_DIR_IN: | |
| m_pin = mconfig->m_in_pin; | |
| break; | |
| case SKL_DIR_OUT: | |
| m_pin = mconfig->m_out_pin; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid direction value\n"); | |
| return -EINVAL; | |
| } | |
| ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count); | |
| if (ret < 0) | |
| return ret; | |
| m_pin[pin_count].in_use = false; | |
| m_pin[pin_count].pin_state = SKL_PIN_UNBIND; | |
| return 0; | |
| } | |
| /* | |
| * Fill up input/output module config format based | |
| * on the direction | |
| */ | |
| static int skl_tplg_fill_fmt(struct device *dev, | |
| struct skl_module_fmt *dst_fmt, | |
| u32 tkn, u32 value) | |
| { | |
| switch (tkn) { | |
| case SKL_TKN_U32_FMT_CH: | |
| dst_fmt->channels = value; | |
| break; | |
| case SKL_TKN_U32_FMT_FREQ: | |
| dst_fmt->s_freq = value; | |
| break; | |
| case SKL_TKN_U32_FMT_BIT_DEPTH: | |
| dst_fmt->bit_depth = value; | |
| break; | |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: | |
| dst_fmt->valid_bit_depth = value; | |
| break; | |
| case SKL_TKN_U32_FMT_CH_CONFIG: | |
| dst_fmt->ch_cfg = value; | |
| break; | |
| case SKL_TKN_U32_FMT_INTERLEAVE: | |
| dst_fmt->interleaving_style = value; | |
| break; | |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: | |
| dst_fmt->sample_type = value; | |
| break; | |
| case SKL_TKN_U32_FMT_CH_MAP: | |
| dst_fmt->ch_map = value; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid token %d\n", tkn); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_widget_fill_fmt(struct device *dev, | |
| struct skl_module_iface *fmt, | |
| u32 tkn, u32 val, u32 dir, int fmt_idx) | |
| { | |
| struct skl_module_fmt *dst_fmt; | |
| if (!fmt) | |
| return -EINVAL; | |
| switch (dir) { | |
| case SKL_DIR_IN: | |
| dst_fmt = &fmt->inputs[fmt_idx].fmt; | |
| break; | |
| case SKL_DIR_OUT: | |
| dst_fmt = &fmt->outputs[fmt_idx].fmt; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid direction: %d\n", dir); | |
| return -EINVAL; | |
| } | |
| return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val); | |
| } | |
| static void skl_tplg_fill_pin_dynamic_val( | |
| struct skl_module_pin *mpin, u32 pin_count, u32 value) | |
| { | |
| int i; | |
| for (i = 0; i < pin_count; i++) | |
| mpin[i].is_dynamic = value; | |
| } | |
| /* | |
| * Resource table in the manifest has pin specific resources | |
| * like pin and pin buffer size | |
| */ | |
| static int skl_tplg_manifest_pin_res_tkn(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_module_res *res, int pin_idx, int dir) | |
| { | |
| struct skl_module_pin_resources *m_pin; | |
| switch (dir) { | |
| case SKL_DIR_IN: | |
| m_pin = &res->input[pin_idx]; | |
| break; | |
| case SKL_DIR_OUT: | |
| m_pin = &res->output[pin_idx]; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid pin direction: %d\n", dir); | |
| return -EINVAL; | |
| } | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_MM_U32_RES_PIN_ID: | |
| m_pin->pin_index = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_PIN_BUF: | |
| m_pin->buf_size = tkn_elem->value; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid token: %d\n", tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Fill module specific resources from the manifest's resource | |
| * table like CPS, DMA size, mem_pages. | |
| */ | |
| static int skl_tplg_fill_res_tkn(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_module_res *res, | |
| int pin_idx, int dir) | |
| { | |
| int ret, tkn_count = 0; | |
| if (!res) | |
| return -EINVAL; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_MM_U32_DMA_SIZE: | |
| res->dma_buffer_size = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_CPC: | |
| res->cpc = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_MEM_PAGES: | |
| res->is_pages = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_OBS: | |
| res->obs = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_IBS: | |
| res->ibs = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_RES_PIN_ID: | |
| case SKL_TKN_MM_U32_PIN_BUF: | |
| ret = skl_tplg_manifest_pin_res_tkn(dev, tkn_elem, res, | |
| pin_idx, dir); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_MM_U32_CPS: | |
| case SKL_TKN_U32_MAX_MCPS: | |
| /* ignore unused tokens */ | |
| break; | |
| default: | |
| dev_err(dev, "Not a res type token: %d", tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| tkn_count++; | |
| return tkn_count; | |
| } | |
| /* | |
| * Parse tokens to fill up the module private data | |
| */ | |
| static int skl_tplg_get_token(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_dev *skl, struct skl_module_cfg *mconfig) | |
| { | |
| int tkn_count = 0; | |
| int ret; | |
| static int is_pipe_exists; | |
| static int pin_index, dir, conf_idx; | |
| struct skl_module_iface *iface = NULL; | |
| struct skl_module_res *res = NULL; | |
| int res_idx = mconfig->res_idx; | |
| int fmt_idx = mconfig->fmt_idx; | |
| /* | |
| * If the manifest structure contains no modules, fill all | |
| * the module data to 0th index. | |
| * res_idx and fmt_idx are default set to 0. | |
| */ | |
| if (skl->nr_modules == 0) { | |
| res = &mconfig->module->resources[res_idx]; | |
| iface = &mconfig->module->formats[fmt_idx]; | |
| } | |
| if (tkn_elem->token > SKL_TKN_MAX) | |
| return -EINVAL; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_U8_IN_QUEUE_COUNT: | |
| mconfig->module->max_input_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: | |
| mconfig->module->max_output_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_DYN_IN_PIN: | |
| if (!mconfig->m_in_pin) | |
| mconfig->m_in_pin = | |
| devm_kcalloc(dev, MAX_IN_QUEUE, | |
| sizeof(*mconfig->m_in_pin), | |
| GFP_KERNEL); | |
| if (!mconfig->m_in_pin) | |
| return -ENOMEM; | |
| skl_tplg_fill_pin_dynamic_val(mconfig->m_in_pin, MAX_IN_QUEUE, | |
| tkn_elem->value); | |
| break; | |
| case SKL_TKN_U8_DYN_OUT_PIN: | |
| if (!mconfig->m_out_pin) | |
| mconfig->m_out_pin = | |
| devm_kcalloc(dev, MAX_IN_QUEUE, | |
| sizeof(*mconfig->m_in_pin), | |
| GFP_KERNEL); | |
| if (!mconfig->m_out_pin) | |
| return -ENOMEM; | |
| skl_tplg_fill_pin_dynamic_val(mconfig->m_out_pin, MAX_OUT_QUEUE, | |
| tkn_elem->value); | |
| break; | |
| case SKL_TKN_U8_TIME_SLOT: | |
| mconfig->time_slot = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_CORE_ID: | |
| mconfig->core_id = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_MOD_TYPE: | |
| mconfig->m_type = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_DEV_TYPE: | |
| mconfig->dev_type = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_HW_CONN_TYPE: | |
| mconfig->hw_conn_type = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U16_MOD_INST_ID: | |
| mconfig->id.instance_id = | |
| tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_MEM_PAGES: | |
| case SKL_TKN_U32_MAX_MCPS: | |
| case SKL_TKN_U32_OBS: | |
| case SKL_TKN_U32_IBS: | |
| ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_index, dir); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_U32_VBUS_ID: | |
| mconfig->vbus_id = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_PARAMS_FIXUP: | |
| mconfig->params_fixup = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_CONVERTER: | |
| mconfig->converter = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_D0I3_CAPS: | |
| mconfig->d0i3_caps = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_PIPE_ID: | |
| ret = skl_tplg_add_pipe(dev, | |
| mconfig, skl, tkn_elem); | |
| if (ret < 0) { | |
| if (ret == -EEXIST) { | |
| is_pipe_exists = 1; | |
| break; | |
| } | |
| return is_pipe_exists; | |
| } | |
| break; | |
| case SKL_TKN_U32_PIPE_CONFIG_ID: | |
| conf_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_PIPE_CONN_TYPE: | |
| case SKL_TKN_U32_PIPE_PRIORITY: | |
| case SKL_TKN_U32_PIPE_MEM_PGS: | |
| case SKL_TKN_U32_PMODE: | |
| case SKL_TKN_U32_PIPE_DIRECTION: | |
| case SKL_TKN_U32_NUM_CONFIGS: | |
| if (is_pipe_exists) { | |
| ret = skl_tplg_fill_pipe_tkn(dev, mconfig->pipe, | |
| tkn_elem->token, tkn_elem->value); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| break; | |
| case SKL_TKN_U32_PATH_MEM_PGS: | |
| case SKL_TKN_U32_CFG_FREQ: | |
| case SKL_TKN_U8_CFG_CHAN: | |
| case SKL_TKN_U8_CFG_BPS: | |
| if (mconfig->pipe->nr_cfgs) { | |
| ret = skl_tplg_fill_pipe_cfg(dev, mconfig->pipe, | |
| tkn_elem->token, tkn_elem->value, | |
| conf_idx, dir); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| break; | |
| case SKL_TKN_CFG_MOD_RES_ID: | |
| mconfig->mod_cfg[conf_idx].res_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_CFG_MOD_FMT_ID: | |
| mconfig->mod_cfg[conf_idx].fmt_idx = tkn_elem->value; | |
| break; | |
| /* | |
| * SKL_TKN_U32_DIR_PIN_COUNT token has the value for both | |
| * direction and the pin count. The first four bits represent | |
| * direction and next four the pin count. | |
| */ | |
| case SKL_TKN_U32_DIR_PIN_COUNT: | |
| dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK; | |
| pin_index = (tkn_elem->value & | |
| SKL_PIN_COUNT_MASK) >> 4; | |
| break; | |
| case SKL_TKN_U32_FMT_CH: | |
| case SKL_TKN_U32_FMT_FREQ: | |
| case SKL_TKN_U32_FMT_BIT_DEPTH: | |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: | |
| case SKL_TKN_U32_FMT_CH_CONFIG: | |
| case SKL_TKN_U32_FMT_INTERLEAVE: | |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: | |
| case SKL_TKN_U32_FMT_CH_MAP: | |
| ret = skl_tplg_widget_fill_fmt(dev, iface, tkn_elem->token, | |
| tkn_elem->value, dir, pin_index); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_U32_PIN_MOD_ID: | |
| case SKL_TKN_U32_PIN_INST_ID: | |
| case SKL_TKN_UUID: | |
| ret = skl_tplg_fill_pins_info(dev, | |
| mconfig, tkn_elem, dir, | |
| pin_index); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_U32_FMT_CFG_IDX: | |
| if (tkn_elem->value > SKL_MAX_PARAMS_TYPES) | |
| return -EINVAL; | |
| mconfig->fmt_cfg_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_CAPS_SIZE: | |
| mconfig->formats_config[mconfig->fmt_cfg_idx].caps_size = | |
| tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_CAPS_SET_PARAMS: | |
| mconfig->formats_config[mconfig->fmt_cfg_idx].set_params = | |
| tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_CAPS_PARAMS_ID: | |
| mconfig->formats_config[mconfig->fmt_cfg_idx].param_id = | |
| tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_PROC_DOMAIN: | |
| mconfig->domain = | |
| tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_DMA_BUF_SIZE: | |
| mconfig->dma_buffer_size = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_IN_PIN_TYPE: | |
| case SKL_TKN_U8_OUT_PIN_TYPE: | |
| case SKL_TKN_U8_CONN_TYPE: | |
| break; | |
| default: | |
| dev_err(dev, "Token %d not handled\n", | |
| tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| tkn_count++; | |
| return tkn_count; | |
| } | |
| /* | |
| * Parse the vendor array for specific tokens to construct | |
| * module private data | |
| */ | |
| static int skl_tplg_get_tokens(struct device *dev, | |
| char *pvt_data, struct skl_dev *skl, | |
| struct skl_module_cfg *mconfig, int block_size) | |
| { | |
| struct snd_soc_tplg_vendor_array *array; | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; | |
| int tkn_count = 0, ret; | |
| int off = 0, tuple_size = 0; | |
| bool is_module_guid = true; | |
| if (block_size <= 0) | |
| return -EINVAL; | |
| while (tuple_size < block_size) { | |
| array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off); | |
| off += array->size; | |
| switch (array->type) { | |
| case SND_SOC_TPLG_TUPLE_TYPE_STRING: | |
| dev_warn(dev, "no string tokens expected for skl tplg\n"); | |
| continue; | |
| case SND_SOC_TPLG_TUPLE_TYPE_UUID: | |
| if (is_module_guid) { | |
| ret = skl_tplg_get_uuid(dev, (guid_t *)mconfig->guid, | |
| array->uuid); | |
| is_module_guid = false; | |
| } else { | |
| ret = skl_tplg_get_token(dev, array->value, skl, | |
| mconfig); | |
| } | |
| if (ret < 0) | |
| return ret; | |
| tuple_size += sizeof(*array->uuid); | |
| continue; | |
| default: | |
| tkn_elem = array->value; | |
| tkn_count = 0; | |
| break; | |
| } | |
| while (tkn_count <= (array->num_elems - 1)) { | |
| ret = skl_tplg_get_token(dev, tkn_elem, | |
| skl, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| tkn_count = tkn_count + ret; | |
| tkn_elem++; | |
| } | |
| tuple_size += tkn_count * sizeof(*tkn_elem); | |
| } | |
| return off; | |
| } | |
| /* | |
| * Every data block is preceded by a descriptor to read the number | |
| * of data blocks, they type of the block and it's size | |
| */ | |
| static int skl_tplg_get_desc_blocks(struct device *dev, | |
| struct snd_soc_tplg_vendor_array *array) | |
| { | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; | |
| tkn_elem = array->value; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_U8_NUM_BLOCKS: | |
| case SKL_TKN_U8_BLOCK_TYPE: | |
| case SKL_TKN_U16_BLOCK_SIZE: | |
| return tkn_elem->value; | |
| default: | |
| dev_err(dev, "Invalid descriptor token %d\n", tkn_elem->token); | |
| break; | |
| } | |
| return -EINVAL; | |
| } | |
| /* Functions to parse private data from configuration file format v4 */ | |
| /* | |
| * Add pipeline from topology binary into driver pipeline list | |
| * | |
| * If already added we return that instance | |
| * Otherwise we create a new instance and add into driver list | |
| */ | |
| static int skl_tplg_add_pipe_v4(struct device *dev, | |
| struct skl_module_cfg *mconfig, struct skl_dev *skl, | |
| struct skl_dfw_v4_pipe *dfw_pipe) | |
| { | |
| struct skl_pipeline *ppl; | |
| struct skl_pipe *pipe; | |
| struct skl_pipe_params *params; | |
| list_for_each_entry(ppl, &skl->ppl_list, node) { | |
| if (ppl->pipe->ppl_id == dfw_pipe->pipe_id) { | |
| mconfig->pipe = ppl->pipe; | |
| return 0; | |
| } | |
| } | |
| ppl = devm_kzalloc(dev, sizeof(*ppl), GFP_KERNEL); | |
| if (!ppl) | |
| return -ENOMEM; | |
| pipe = devm_kzalloc(dev, sizeof(*pipe), GFP_KERNEL); | |
| if (!pipe) | |
| return -ENOMEM; | |
| params = devm_kzalloc(dev, sizeof(*params), GFP_KERNEL); | |
| if (!params) | |
| return -ENOMEM; | |
| pipe->ppl_id = dfw_pipe->pipe_id; | |
| pipe->memory_pages = dfw_pipe->memory_pages; | |
| pipe->pipe_priority = dfw_pipe->pipe_priority; | |
| pipe->conn_type = dfw_pipe->conn_type; | |
| pipe->state = SKL_PIPE_INVALID; | |
| pipe->p_params = params; | |
| INIT_LIST_HEAD(&pipe->w_list); | |
| ppl->pipe = pipe; | |
| list_add(&ppl->node, &skl->ppl_list); | |
| mconfig->pipe = pipe; | |
| return 0; | |
| } | |
| static void skl_fill_module_pin_info_v4(struct skl_dfw_v4_module_pin *dfw_pin, | |
| struct skl_module_pin *m_pin, | |
| bool is_dynamic, int max_pin) | |
| { | |
| int i; | |
| for (i = 0; i < max_pin; i++) { | |
| m_pin[i].id.module_id = dfw_pin[i].module_id; | |
| m_pin[i].id.instance_id = dfw_pin[i].instance_id; | |
| m_pin[i].in_use = false; | |
| m_pin[i].is_dynamic = is_dynamic; | |
| m_pin[i].pin_state = SKL_PIN_UNBIND; | |
| } | |
| } | |
| static void skl_tplg_fill_fmt_v4(struct skl_module_pin_fmt *dst_fmt, | |
| struct skl_dfw_v4_module_fmt *src_fmt, | |
| int pins) | |
| { | |
| int i; | |
| for (i = 0; i < pins; i++) { | |
| dst_fmt[i].fmt.channels = src_fmt[i].channels; | |
| dst_fmt[i].fmt.s_freq = src_fmt[i].freq; | |
| dst_fmt[i].fmt.bit_depth = src_fmt[i].bit_depth; | |
| dst_fmt[i].fmt.valid_bit_depth = src_fmt[i].valid_bit_depth; | |
| dst_fmt[i].fmt.ch_cfg = src_fmt[i].ch_cfg; | |
| dst_fmt[i].fmt.ch_map = src_fmt[i].ch_map; | |
| dst_fmt[i].fmt.interleaving_style = | |
| src_fmt[i].interleaving_style; | |
| dst_fmt[i].fmt.sample_type = src_fmt[i].sample_type; | |
| } | |
| } | |
| static int skl_tplg_get_pvt_data_v4(struct snd_soc_tplg_dapm_widget *tplg_w, | |
| struct skl_dev *skl, struct device *dev, | |
| struct skl_module_cfg *mconfig) | |
| { | |
| struct skl_dfw_v4_module *dfw = | |
| (struct skl_dfw_v4_module *)tplg_w->priv.data; | |
| int ret; | |
| int idx = mconfig->fmt_cfg_idx; | |
| dev_dbg(dev, "Parsing Skylake v4 widget topology data\n"); | |
| ret = guid_parse(dfw->uuid, (guid_t *)mconfig->guid); | |
| if (ret) | |
| return ret; | |
| mconfig->id.module_id = -1; | |
| mconfig->id.instance_id = dfw->instance_id; | |
| mconfig->module->resources[0].cpc = dfw->max_mcps / 1000; | |
| mconfig->module->resources[0].ibs = dfw->ibs; | |
| mconfig->module->resources[0].obs = dfw->obs; | |
| mconfig->core_id = dfw->core_id; | |
| mconfig->module->max_input_pins = dfw->max_in_queue; | |
| mconfig->module->max_output_pins = dfw->max_out_queue; | |
| mconfig->module->loadable = dfw->is_loadable; | |
| skl_tplg_fill_fmt_v4(mconfig->module->formats[0].inputs, dfw->in_fmt, | |
| MAX_IN_QUEUE); | |
| skl_tplg_fill_fmt_v4(mconfig->module->formats[0].outputs, dfw->out_fmt, | |
| MAX_OUT_QUEUE); | |
| mconfig->params_fixup = dfw->params_fixup; | |
| mconfig->converter = dfw->converter; | |
| mconfig->m_type = dfw->module_type; | |
| mconfig->vbus_id = dfw->vbus_id; | |
| mconfig->module->resources[0].is_pages = dfw->mem_pages; | |
| ret = skl_tplg_add_pipe_v4(dev, mconfig, skl, &dfw->pipe); | |
| if (ret) | |
| return ret; | |
| mconfig->dev_type = dfw->dev_type; | |
| mconfig->hw_conn_type = dfw->hw_conn_type; | |
| mconfig->time_slot = dfw->time_slot; | |
| mconfig->formats_config[idx].caps_size = dfw->caps.caps_size; | |
| mconfig->m_in_pin = devm_kcalloc(dev, | |
| MAX_IN_QUEUE, sizeof(*mconfig->m_in_pin), | |
| GFP_KERNEL); | |
| if (!mconfig->m_in_pin) | |
| return -ENOMEM; | |
| mconfig->m_out_pin = devm_kcalloc(dev, | |
| MAX_OUT_QUEUE, sizeof(*mconfig->m_out_pin), | |
| GFP_KERNEL); | |
| if (!mconfig->m_out_pin) | |
| return -ENOMEM; | |
| skl_fill_module_pin_info_v4(dfw->in_pin, mconfig->m_in_pin, | |
| dfw->is_dynamic_in_pin, | |
| mconfig->module->max_input_pins); | |
| skl_fill_module_pin_info_v4(dfw->out_pin, mconfig->m_out_pin, | |
| dfw->is_dynamic_out_pin, | |
| mconfig->module->max_output_pins); | |
| if (mconfig->formats_config[idx].caps_size) { | |
| mconfig->formats_config[idx].set_params = dfw->caps.set_params; | |
| mconfig->formats_config[idx].param_id = dfw->caps.param_id; | |
| mconfig->formats_config[idx].caps = | |
| devm_kzalloc(dev, mconfig->formats_config[idx].caps_size, | |
| GFP_KERNEL); | |
| if (!mconfig->formats_config[idx].caps) | |
| return -ENOMEM; | |
| memcpy(mconfig->formats_config[idx].caps, dfw->caps.caps, | |
| dfw->caps.caps_size); | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_get_caps_data(struct device *dev, char *data, | |
| struct skl_module_cfg *mconfig) | |
| { | |
| int idx = mconfig->fmt_cfg_idx; | |
| if (mconfig->formats_config[idx].caps_size > 0) { | |
| mconfig->formats_config[idx].caps = | |
| devm_kzalloc(dev, mconfig->formats_config[idx].caps_size, | |
| GFP_KERNEL); | |
| if (!mconfig->formats_config[idx].caps) | |
| return -ENOMEM; | |
| memcpy(mconfig->formats_config[idx].caps, data, | |
| mconfig->formats_config[idx].caps_size); | |
| } | |
| return mconfig->formats_config[idx].caps_size; | |
| } | |
| /* | |
| * Parse the private data for the token and corresponding value. | |
| * The private data can have multiple data blocks. So, a data block | |
| * is preceded by a descriptor for number of blocks and a descriptor | |
| * for the type and size of the suceeding data block. | |
| */ | |
| static int skl_tplg_get_pvt_data(struct snd_soc_tplg_dapm_widget *tplg_w, | |
| struct skl_dev *skl, struct device *dev, | |
| struct skl_module_cfg *mconfig) | |
| { | |
| struct snd_soc_tplg_vendor_array *array; | |
| int num_blocks, block_size, block_type, off = 0; | |
| char *data; | |
| int ret; | |
| /* | |
| * v4 configuration files have a valid UUID at the start of | |
| * the widget's private data. | |
| */ | |
| if (uuid_is_valid((char *)tplg_w->priv.data)) | |
| return skl_tplg_get_pvt_data_v4(tplg_w, skl, dev, mconfig); | |
| /* Read the NUM_DATA_BLOCKS descriptor */ | |
| array = (struct snd_soc_tplg_vendor_array *)tplg_w->priv.data; | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| num_blocks = ret; | |
| off += array->size; | |
| /* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */ | |
| while (num_blocks > 0) { | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (tplg_w->priv.data + off); | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| block_type = ret; | |
| off += array->size; | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (tplg_w->priv.data + off); | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| block_size = ret; | |
| off += array->size; | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (tplg_w->priv.data + off); | |
| data = (tplg_w->priv.data + off); | |
| if (block_type == SKL_TYPE_TUPLE) { | |
| ret = skl_tplg_get_tokens(dev, data, | |
| skl, mconfig, block_size); | |
| } else { | |
| ret = skl_tplg_get_caps_data(dev, data, mconfig); | |
| } | |
| if (ret < 0) | |
| return ret; | |
| --num_blocks; | |
| off += ret; | |
| } | |
| return 0; | |
| } | |
| static void skl_clear_pin_config(struct snd_soc_component *component, | |
| struct snd_soc_dapm_widget *w) | |
| { | |
| int i; | |
| struct skl_module_cfg *mconfig; | |
| struct skl_pipe *pipe; | |
| if (!strncmp(w->dapm->component->name, component->name, | |
| strlen(component->name))) { | |
| mconfig = w->priv; | |
| pipe = mconfig->pipe; | |
| for (i = 0; i < mconfig->module->max_input_pins; i++) { | |
| mconfig->m_in_pin[i].in_use = false; | |
| mconfig->m_in_pin[i].pin_state = SKL_PIN_UNBIND; | |
| } | |
| for (i = 0; i < mconfig->module->max_output_pins; i++) { | |
| mconfig->m_out_pin[i].in_use = false; | |
| mconfig->m_out_pin[i].pin_state = SKL_PIN_UNBIND; | |
| } | |
| pipe->state = SKL_PIPE_INVALID; | |
| mconfig->m_state = SKL_MODULE_UNINIT; | |
| } | |
| } | |
| void skl_cleanup_resources(struct skl_dev *skl) | |
| { | |
| struct snd_soc_component *soc_component = skl->component; | |
| struct snd_soc_dapm_widget *w; | |
| struct snd_soc_card *card; | |
| if (soc_component == NULL) | |
| return; | |
| card = soc_component->card; | |
| if (!card || !card->instantiated) | |
| return; | |
| list_for_each_entry(w, &card->widgets, list) { | |
| if (is_skl_dsp_widget_type(w, skl->dev) && w->priv != NULL) | |
| skl_clear_pin_config(soc_component, w); | |
| } | |
| skl_clear_module_cnt(skl->dsp); | |
| } | |
| /* | |
| * Topology core widget load callback | |
| * | |
| * This is used to save the private data for each widget which gives | |
| * information to the driver about module and pipeline parameters which DSP | |
| * FW expects like ids, resource values, formats etc | |
| */ | |
| static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, int index, | |
| struct snd_soc_dapm_widget *w, | |
| struct snd_soc_tplg_dapm_widget *tplg_w) | |
| { | |
| int ret; | |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); | |
| struct skl_dev *skl = bus_to_skl(bus); | |
| struct skl_module_cfg *mconfig; | |
| if (!tplg_w->priv.size) | |
| goto bind_event; | |
| mconfig = devm_kzalloc(bus->dev, sizeof(*mconfig), GFP_KERNEL); | |
| if (!mconfig) | |
| return -ENOMEM; | |
| if (skl->nr_modules == 0) { | |
| mconfig->module = devm_kzalloc(bus->dev, | |
| sizeof(*mconfig->module), GFP_KERNEL); | |
| if (!mconfig->module) | |
| return -ENOMEM; | |
| } | |
| w->priv = mconfig; | |
| /* | |
| * module binary can be loaded later, so set it to query when | |
| * module is load for a use case | |
| */ | |
| mconfig->id.module_id = -1; | |
| /* To provide backward compatibility, set default as SKL_PARAM_INIT */ | |
| mconfig->fmt_cfg_idx = SKL_PARAM_INIT; | |
| /* Parse private data for tuples */ | |
| ret = skl_tplg_get_pvt_data(tplg_w, skl, bus->dev, mconfig); | |
| if (ret < 0) | |
| return ret; | |
| skl_debug_init_module(skl->debugfs, w, mconfig); | |
| bind_event: | |
| if (tplg_w->event_type == 0) { | |
| dev_dbg(bus->dev, "ASoC: No event handler required\n"); | |
| return 0; | |
| } | |
| ret = snd_soc_tplg_widget_bind_event(w, skl_tplg_widget_ops, | |
| ARRAY_SIZE(skl_tplg_widget_ops), | |
| tplg_w->event_type); | |
| if (ret) { | |
| dev_err(bus->dev, "%s: No matching event handlers found for %d\n", | |
| __func__, tplg_w->event_type); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int skl_init_algo_data(struct device *dev, struct soc_bytes_ext *be, | |
| struct snd_soc_tplg_bytes_control *bc) | |
| { | |
| struct skl_algo_data *ac; | |
| struct skl_dfw_algo_data *dfw_ac = | |
| (struct skl_dfw_algo_data *)bc->priv.data; | |
| ac = devm_kzalloc(dev, sizeof(*ac), GFP_KERNEL); | |
| if (!ac) | |
| return -ENOMEM; | |
| /* Fill private data */ | |
| ac->max = dfw_ac->max; | |
| ac->param_id = dfw_ac->param_id; | |
| ac->set_params = dfw_ac->set_params; | |
| ac->size = dfw_ac->max; | |
| if (ac->max) { | |
| ac->params = devm_kzalloc(dev, ac->max, GFP_KERNEL); | |
| if (!ac->params) | |
| return -ENOMEM; | |
| memcpy(ac->params, dfw_ac->params, ac->max); | |
| } | |
| be->dobj.private = ac; | |
| return 0; | |
| } | |
| static int skl_init_enum_data(struct device *dev, struct soc_enum *se, | |
| struct snd_soc_tplg_enum_control *ec) | |
| { | |
| void *data; | |
| if (ec->priv.size) { | |
| data = devm_kzalloc(dev, sizeof(ec->priv.size), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| memcpy(data, ec->priv.data, ec->priv.size); | |
| se->dobj.private = data; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_control_load(struct snd_soc_component *cmpnt, | |
| int index, | |
| struct snd_kcontrol_new *kctl, | |
| struct snd_soc_tplg_ctl_hdr *hdr) | |
| { | |
| struct soc_bytes_ext *sb; | |
| struct snd_soc_tplg_bytes_control *tplg_bc; | |
| struct snd_soc_tplg_enum_control *tplg_ec; | |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); | |
| struct soc_enum *se; | |
| switch (hdr->ops.info) { | |
| case SND_SOC_TPLG_CTL_BYTES: | |
| tplg_bc = container_of(hdr, | |
| struct snd_soc_tplg_bytes_control, hdr); | |
| if (kctl->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) { | |
| sb = (struct soc_bytes_ext *)kctl->private_value; | |
| if (tplg_bc->priv.size) | |
| return skl_init_algo_data( | |
| bus->dev, sb, tplg_bc); | |
| } | |
| break; | |
| case SND_SOC_TPLG_CTL_ENUM: | |
| tplg_ec = container_of(hdr, | |
| struct snd_soc_tplg_enum_control, hdr); | |
| if (kctl->access & SNDRV_CTL_ELEM_ACCESS_READ) { | |
| se = (struct soc_enum *)kctl->private_value; | |
| if (tplg_ec->priv.size) | |
| skl_init_enum_data(bus->dev, se, tplg_ec); | |
| } | |
| /* | |
| * now that the control initializations are done, remove | |
| * write permission for the DMIC configuration enums to | |
| * avoid conflicts between NHLT settings and user interaction | |
| */ | |
| if (hdr->ops.get == SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC) | |
| kctl->access = SNDRV_CTL_ELEM_ACCESS_READ; | |
| break; | |
| default: | |
| dev_dbg(bus->dev, "Control load not supported %d:%d:%d\n", | |
| hdr->ops.get, hdr->ops.put, hdr->ops.info); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_fill_str_mfest_tkn(struct device *dev, | |
| struct snd_soc_tplg_vendor_string_elem *str_elem, | |
| struct skl_dev *skl) | |
| { | |
| int tkn_count = 0; | |
| static int ref_count; | |
| switch (str_elem->token) { | |
| case SKL_TKN_STR_LIB_NAME: | |
| if (ref_count > skl->lib_count - 1) { | |
| ref_count = 0; | |
| return -EINVAL; | |
| } | |
| strncpy(skl->lib_info[ref_count].name, | |
| str_elem->string, | |
| ARRAY_SIZE(skl->lib_info[ref_count].name)); | |
| ref_count++; | |
| break; | |
| default: | |
| dev_err(dev, "Not a string token %d\n", str_elem->token); | |
| break; | |
| } | |
| tkn_count++; | |
| return tkn_count; | |
| } | |
| static int skl_tplg_get_str_tkn(struct device *dev, | |
| struct snd_soc_tplg_vendor_array *array, | |
| struct skl_dev *skl) | |
| { | |
| int tkn_count = 0, ret; | |
| struct snd_soc_tplg_vendor_string_elem *str_elem; | |
| str_elem = (struct snd_soc_tplg_vendor_string_elem *)array->value; | |
| while (tkn_count < array->num_elems) { | |
| ret = skl_tplg_fill_str_mfest_tkn(dev, str_elem, skl); | |
| str_elem++; | |
| if (ret < 0) | |
| return ret; | |
| tkn_count = tkn_count + ret; | |
| } | |
| return tkn_count; | |
| } | |
| static int skl_tplg_manifest_fill_fmt(struct device *dev, | |
| struct skl_module_iface *fmt, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| u32 dir, int fmt_idx) | |
| { | |
| struct skl_module_pin_fmt *dst_fmt; | |
| struct skl_module_fmt *mod_fmt; | |
| int ret; | |
| if (!fmt) | |
| return -EINVAL; | |
| switch (dir) { | |
| case SKL_DIR_IN: | |
| dst_fmt = &fmt->inputs[fmt_idx]; | |
| break; | |
| case SKL_DIR_OUT: | |
| dst_fmt = &fmt->outputs[fmt_idx]; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid direction: %d\n", dir); | |
| return -EINVAL; | |
| } | |
| mod_fmt = &dst_fmt->fmt; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_MM_U32_INTF_PIN_ID: | |
| dst_fmt->id = tkn_elem->value; | |
| break; | |
| default: | |
| ret = skl_tplg_fill_fmt(dev, mod_fmt, tkn_elem->token, | |
| tkn_elem->value); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_fill_mod_info(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_module *mod) | |
| { | |
| if (!mod) | |
| return -EINVAL; | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_U8_IN_PIN_TYPE: | |
| mod->input_pin_type = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_OUT_PIN_TYPE: | |
| mod->output_pin_type = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_IN_QUEUE_COUNT: | |
| mod->max_input_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: | |
| mod->max_output_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U8_NUM_RES: | |
| mod->nr_resources = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U8_NUM_INTF: | |
| mod->nr_interfaces = tkn_elem->value; | |
| break; | |
| default: | |
| dev_err(dev, "Invalid mod info token %d", tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int skl_tplg_get_int_tkn(struct device *dev, | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem, | |
| struct skl_dev *skl) | |
| { | |
| int tkn_count = 0, ret; | |
| static int mod_idx, res_val_idx, intf_val_idx, dir, pin_idx; | |
| struct skl_module_res *res = NULL; | |
| struct skl_module_iface *fmt = NULL; | |
| struct skl_module *mod = NULL; | |
| static struct skl_astate_param *astate_table; | |
| static int astate_cfg_idx, count; | |
| int i; | |
| size_t size; | |
| if (skl->modules) { | |
| mod = skl->modules[mod_idx]; | |
| res = &mod->resources[res_val_idx]; | |
| fmt = &mod->formats[intf_val_idx]; | |
| } | |
| switch (tkn_elem->token) { | |
| case SKL_TKN_U32_LIB_COUNT: | |
| skl->lib_count = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_NUM_MOD: | |
| skl->nr_modules = tkn_elem->value; | |
| skl->modules = devm_kcalloc(dev, skl->nr_modules, | |
| sizeof(*skl->modules), GFP_KERNEL); | |
| if (!skl->modules) | |
| return -ENOMEM; | |
| for (i = 0; i < skl->nr_modules; i++) { | |
| skl->modules[i] = devm_kzalloc(dev, | |
| sizeof(struct skl_module), GFP_KERNEL); | |
| if (!skl->modules[i]) | |
| return -ENOMEM; | |
| } | |
| break; | |
| case SKL_TKN_MM_U8_MOD_IDX: | |
| mod_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_ASTATE_COUNT: | |
| if (astate_table != NULL) { | |
| dev_err(dev, "More than one entry for A-State count"); | |
| return -EINVAL; | |
| } | |
| if (tkn_elem->value > SKL_MAX_ASTATE_CFG) { | |
| dev_err(dev, "Invalid A-State count %d\n", | |
| tkn_elem->value); | |
| return -EINVAL; | |
| } | |
| size = struct_size(skl->cfg.astate_cfg, astate_table, | |
| tkn_elem->value); | |
| skl->cfg.astate_cfg = devm_kzalloc(dev, size, GFP_KERNEL); | |
| if (!skl->cfg.astate_cfg) | |
| return -ENOMEM; | |
| astate_table = skl->cfg.astate_cfg->astate_table; | |
| count = skl->cfg.astate_cfg->count = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_ASTATE_IDX: | |
| if (tkn_elem->value >= count) { | |
| dev_err(dev, "Invalid A-State index %d\n", | |
| tkn_elem->value); | |
| return -EINVAL; | |
| } | |
| astate_cfg_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_ASTATE_KCPS: | |
| astate_table[astate_cfg_idx].kcps = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_ASTATE_CLK_SRC: | |
| astate_table[astate_cfg_idx].clk_src = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U8_IN_PIN_TYPE: | |
| case SKL_TKN_U8_OUT_PIN_TYPE: | |
| case SKL_TKN_U8_IN_QUEUE_COUNT: | |
| case SKL_TKN_U8_OUT_QUEUE_COUNT: | |
| case SKL_TKN_MM_U8_NUM_RES: | |
| case SKL_TKN_MM_U8_NUM_INTF: | |
| ret = skl_tplg_fill_mod_info(dev, tkn_elem, mod); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_U32_DIR_PIN_COUNT: | |
| dir = tkn_elem->value & SKL_IN_DIR_BIT_MASK; | |
| pin_idx = (tkn_elem->value & SKL_PIN_COUNT_MASK) >> 4; | |
| break; | |
| case SKL_TKN_MM_U32_RES_ID: | |
| if (!res) | |
| return -EINVAL; | |
| res->id = tkn_elem->value; | |
| res_val_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_FMT_ID: | |
| if (!fmt) | |
| return -EINVAL; | |
| fmt->fmt_idx = tkn_elem->value; | |
| intf_val_idx = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_CPS: | |
| case SKL_TKN_MM_U32_DMA_SIZE: | |
| case SKL_TKN_MM_U32_CPC: | |
| case SKL_TKN_U32_MEM_PAGES: | |
| case SKL_TKN_U32_OBS: | |
| case SKL_TKN_U32_IBS: | |
| case SKL_TKN_MM_U32_RES_PIN_ID: | |
| case SKL_TKN_MM_U32_PIN_BUF: | |
| ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_idx, dir); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| case SKL_TKN_MM_U32_NUM_IN_FMT: | |
| if (!fmt) | |
| return -EINVAL; | |
| res->nr_input_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_MM_U32_NUM_OUT_FMT: | |
| if (!fmt) | |
| return -EINVAL; | |
| res->nr_output_pins = tkn_elem->value; | |
| break; | |
| case SKL_TKN_U32_FMT_CH: | |
| case SKL_TKN_U32_FMT_FREQ: | |
| case SKL_TKN_U32_FMT_BIT_DEPTH: | |
| case SKL_TKN_U32_FMT_SAMPLE_SIZE: | |
| case SKL_TKN_U32_FMT_CH_CONFIG: | |
| case SKL_TKN_U32_FMT_INTERLEAVE: | |
| case SKL_TKN_U32_FMT_SAMPLE_TYPE: | |
| case SKL_TKN_U32_FMT_CH_MAP: | |
| case SKL_TKN_MM_U32_INTF_PIN_ID: | |
| ret = skl_tplg_manifest_fill_fmt(dev, fmt, tkn_elem, | |
| dir, pin_idx); | |
| if (ret < 0) | |
| return ret; | |
| break; | |
| default: | |
| dev_err(dev, "Not a manifest token %d\n", tkn_elem->token); | |
| return -EINVAL; | |
| } | |
| tkn_count++; | |
| return tkn_count; | |
| } | |
| /* | |
| * Fill the manifest structure by parsing the tokens based on the | |
| * type. | |
| */ | |
| static int skl_tplg_get_manifest_tkn(struct device *dev, | |
| char *pvt_data, struct skl_dev *skl, | |
| int block_size) | |
| { | |
| int tkn_count = 0, ret; | |
| int off = 0, tuple_size = 0; | |
| u8 uuid_index = 0; | |
| struct snd_soc_tplg_vendor_array *array; | |
| struct snd_soc_tplg_vendor_value_elem *tkn_elem; | |
| if (block_size <= 0) | |
| return -EINVAL; | |
| while (tuple_size < block_size) { | |
| array = (struct snd_soc_tplg_vendor_array *)(pvt_data + off); | |
| off += array->size; | |
| switch (array->type) { | |
| case SND_SOC_TPLG_TUPLE_TYPE_STRING: | |
| ret = skl_tplg_get_str_tkn(dev, array, skl); | |
| if (ret < 0) | |
| return ret; | |
| tkn_count = ret; | |
| tuple_size += tkn_count * | |
| sizeof(struct snd_soc_tplg_vendor_string_elem); | |
| continue; | |
| case SND_SOC_TPLG_TUPLE_TYPE_UUID: | |
| if (array->uuid->token != SKL_TKN_UUID) { | |
| dev_err(dev, "Not an UUID token: %d\n", | |
| array->uuid->token); | |
| return -EINVAL; | |
| } | |
| if (uuid_index >= skl->nr_modules) { | |
| dev_err(dev, "Too many UUID tokens\n"); | |
| return -EINVAL; | |
| } | |
| import_guid(&skl->modules[uuid_index++]->uuid, | |
| array->uuid->uuid); | |
| tuple_size += sizeof(*array->uuid); | |
| continue; | |
| default: | |
| tkn_elem = array->value; | |
| tkn_count = 0; | |
| break; | |
| } | |
| while (tkn_count <= array->num_elems - 1) { | |
| ret = skl_tplg_get_int_tkn(dev, | |
| tkn_elem, skl); | |
| if (ret < 0) | |
| return ret; | |
| tkn_count = tkn_count + ret; | |
| tkn_elem++; | |
| } | |
| tuple_size += (tkn_count * sizeof(*tkn_elem)); | |
| tkn_count = 0; | |
| } | |
| return off; | |
| } | |
| /* | |
| * Parse manifest private data for tokens. The private data block is | |
| * preceded by descriptors for type and size of data block. | |
| */ | |
| static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, | |
| struct device *dev, struct skl_dev *skl) | |
| { | |
| struct snd_soc_tplg_vendor_array *array; | |
| int num_blocks, block_size = 0, block_type, off = 0; | |
| char *data; | |
| int ret; | |
| /* Read the NUM_DATA_BLOCKS descriptor */ | |
| array = (struct snd_soc_tplg_vendor_array *)manifest->priv.data; | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| num_blocks = ret; | |
| off += array->size; | |
| /* Read the BLOCK_TYPE and BLOCK_SIZE descriptor */ | |
| while (num_blocks > 0) { | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (manifest->priv.data + off); | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| block_type = ret; | |
| off += array->size; | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (manifest->priv.data + off); | |
| ret = skl_tplg_get_desc_blocks(dev, array); | |
| if (ret < 0) | |
| return ret; | |
| block_size = ret; | |
| off += array->size; | |
| array = (struct snd_soc_tplg_vendor_array *) | |
| (manifest->priv.data + off); | |
| data = (manifest->priv.data + off); | |
| if (block_type == SKL_TYPE_TUPLE) { | |
| ret = skl_tplg_get_manifest_tkn(dev, data, skl, | |
| block_size); | |
| if (ret < 0) | |
| return ret; | |
| --num_blocks; | |
| } else { | |
| return -EINVAL; | |
| } | |
| off += ret; | |
| } | |
| return 0; | |
| } | |
| static int skl_manifest_load(struct snd_soc_component *cmpnt, int index, | |
| struct snd_soc_tplg_manifest *manifest) | |
| { | |
| struct hdac_bus *bus = snd_soc_component_get_drvdata(cmpnt); | |
| struct skl_dev *skl = bus_to_skl(bus); | |
| /* proceed only if we have private data defined */ | |
| if (manifest->priv.size == 0) | |
| return 0; | |
| skl_tplg_get_manifest_data(manifest, bus->dev, skl); | |
| if (skl->lib_count > SKL_MAX_LIB) { | |
| dev_err(bus->dev, "Exceeding max Library count. Got:%d\n", | |
| skl->lib_count); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void skl_tplg_complete(struct snd_soc_component *component) | |
| { | |
| struct snd_soc_dobj *dobj; | |
| struct snd_soc_acpi_mach *mach; | |
| struct snd_ctl_elem_value *val; | |
| int i; | |
| val = kmalloc(sizeof(*val), GFP_KERNEL); | |
| if (!val) | |
| return; | |
| mach = dev_get_platdata(component->card->dev); | |
| list_for_each_entry(dobj, &component->dobj_list, list) { | |
| struct snd_kcontrol *kcontrol = dobj->control.kcontrol; | |
| struct soc_enum *se; | |
| char **texts; | |
| char chan_text[4]; | |
| if (dobj->type != SND_SOC_DOBJ_ENUM || !kcontrol || | |
| kcontrol->put != skl_tplg_multi_config_set_dmic) | |
| continue; | |
| se = (struct soc_enum *)kcontrol->private_value; | |
| texts = dobj->control.dtexts; | |
| sprintf(chan_text, "c%d", mach->mach_params.dmic_num); | |
| for (i = 0; i < se->items; i++) { | |
| if (strstr(texts[i], chan_text)) { | |
| memset(val, 0, sizeof(*val)); | |
| val->value.enumerated.item[0] = i; | |
| kcontrol->put(kcontrol, val); | |
| } | |
| } | |
| } | |
| kfree(val); | |
| } | |
| static struct snd_soc_tplg_ops skl_tplg_ops = { | |
| .widget_load = skl_tplg_widget_load, | |
| .control_load = skl_tplg_control_load, | |
| .bytes_ext_ops = skl_tlv_ops, | |
| .bytes_ext_ops_count = ARRAY_SIZE(skl_tlv_ops), | |
| .io_ops = skl_tplg_kcontrol_ops, | |
| .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), | |
| .manifest = skl_manifest_load, | |
| .dai_load = skl_dai_load, | |
| .complete = skl_tplg_complete, | |
| }; | |
| /* | |
| * A pipe can have multiple modules, each of them will be a DAPM widget as | |
| * well. While managing a pipeline we need to get the list of all the | |
| * widgets in a pipelines, so this helper - skl_tplg_create_pipe_widget_list() | |
| * helps to get the SKL type widgets in that pipeline | |
| */ | |
| static int skl_tplg_create_pipe_widget_list(struct snd_soc_component *component) | |
| { | |
| struct snd_soc_dapm_widget *w; | |
| struct skl_module_cfg *mcfg = NULL; | |
| struct skl_pipe_module *p_module = NULL; | |
| struct skl_pipe *pipe; | |
| list_for_each_entry(w, &component->card->widgets, list) { | |
| if (is_skl_dsp_widget_type(w, component->dev) && w->priv) { | |
| mcfg = w->priv; | |
| pipe = mcfg->pipe; | |
| p_module = devm_kzalloc(component->dev, | |
| sizeof(*p_module), GFP_KERNEL); | |
| if (!p_module) | |
| return -ENOMEM; | |
| p_module->w = w; | |
| list_add_tail(&p_module->node, &pipe->w_list); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void skl_tplg_set_pipe_type(struct skl_dev *skl, struct skl_pipe *pipe) | |
| { | |
| struct skl_pipe_module *w_module; | |
| struct snd_soc_dapm_widget *w; | |
| struct skl_module_cfg *mconfig; | |
| bool host_found = false, link_found = false; | |
| list_for_each_entry(w_module, &pipe->w_list, node) { | |
| w = w_module->w; | |
| mconfig = w->priv; | |
| if (mconfig->dev_type == SKL_DEVICE_HDAHOST) | |
| host_found = true; | |
| else if (mconfig->dev_type != SKL_DEVICE_NONE) | |
| link_found = true; | |
| } | |
| if (host_found && link_found) | |
| pipe->passthru = true; | |
| else | |
| pipe->passthru = false; | |
| } | |
| /* | |
| * SKL topology init routine | |
| */ | |
| int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus) | |
| { | |
| int ret; | |
| const struct firmware *fw; | |
| struct skl_dev *skl = bus_to_skl(bus); | |
| struct skl_pipeline *ppl; | |
| ret = request_firmware(&fw, skl->tplg_name, bus->dev); | |
| if (ret < 0) { | |
| char alt_tplg_name[64]; | |
| snprintf(alt_tplg_name, sizeof(alt_tplg_name), "%s-tplg.bin", | |
| skl->mach->drv_name); | |
| dev_info(bus->dev, "tplg fw %s load failed with %d, trying alternative tplg name %s", | |
| skl->tplg_name, ret, alt_tplg_name); | |
| ret = request_firmware(&fw, alt_tplg_name, bus->dev); | |
| if (!ret) | |
| goto component_load; | |
| dev_info(bus->dev, "tplg %s failed with %d, falling back to dfw_sst.bin", | |
| alt_tplg_name, ret); | |
| ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); | |
| if (ret < 0) { | |
| dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n", | |
| "dfw_sst.bin", ret); | |
| return ret; | |
| } | |
| } | |
| component_load: | |
| ret = snd_soc_tplg_component_load(component, &skl_tplg_ops, fw); | |
| if (ret < 0) { | |
| dev_err(bus->dev, "tplg component load failed%d\n", ret); | |
| goto err; | |
| } | |
| ret = skl_tplg_create_pipe_widget_list(component); | |
| if (ret < 0) { | |
| dev_err(bus->dev, "tplg create pipe widget list failed%d\n", | |
| ret); | |
| goto err; | |
| } | |
| list_for_each_entry(ppl, &skl->ppl_list, node) | |
| skl_tplg_set_pipe_type(skl, ppl->pipe); | |
| err: | |
| release_firmware(fw); | |
| return ret; | |
| } | |
| void skl_tplg_exit(struct snd_soc_component *component, struct hdac_bus *bus) | |
| { | |
| struct skl_dev *skl = bus_to_skl(bus); | |
| struct skl_pipeline *ppl, *tmp; | |
| list_for_each_entry_safe(ppl, tmp, &skl->ppl_list, node) | |
| list_del(&ppl->node); | |
| /* clean up topology */ | |
| snd_soc_tplg_component_remove(component); | |
| } |