| /* |
| * Copyright (C) 2013, NVIDIA Corporation. All rights reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sub license, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #ifndef __DRM_PANEL_H__ |
| #define __DRM_PANEL_H__ |
| |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/list.h> |
| |
| struct device_node; |
| struct drm_connector; |
| struct drm_device; |
| struct drm_panel; |
| struct display_timing; |
| |
| /** |
| * struct drm_panel_funcs - perform operations on a given panel |
| * |
| * The .prepare() function is typically called before the display controller |
| * starts to transmit video data. Panel drivers can use this to turn the panel |
| * on and wait for it to become ready. If additional configuration is required |
| * (via a control bus such as I2C, SPI or DSI for example) this is a good time |
| * to do that. |
| * |
| * After the display controller has started transmitting video data, it's safe |
| * to call the .enable() function. This will typically enable the backlight to |
| * make the image on screen visible. Some panels require a certain amount of |
| * time or frames before the image is displayed. This function is responsible |
| * for taking this into account before enabling the backlight to avoid visual |
| * glitches. |
| * |
| * Before stopping video transmission from the display controller it can be |
| * necessary to turn off the panel to avoid visual glitches. This is done in |
| * the .disable() function. Analogously to .enable() this typically involves |
| * turning off the backlight and waiting for some time to make sure no image |
| * is visible on the panel. It is then safe for the display controller to |
| * cease transmission of video data. |
| * |
| * To save power when no video data is transmitted, a driver can power down |
| * the panel. This is the job of the .unprepare() function. |
| */ |
| struct drm_panel_funcs { |
| /** |
| * @prepare: |
| * |
| * Turn on panel and perform set up. |
| */ |
| int (*prepare)(struct drm_panel *panel); |
| |
| /** |
| * @enable: |
| * |
| * Enable panel (turn on back light, etc.). |
| */ |
| int (*enable)(struct drm_panel *panel); |
| |
| /** |
| * @disable: |
| * |
| * Disable panel (turn off back light, etc.). |
| */ |
| int (*disable)(struct drm_panel *panel); |
| |
| /** |
| * @unprepare: |
| * |
| * Turn off panel. |
| */ |
| int (*unprepare)(struct drm_panel *panel); |
| |
| /** |
| * @get_modes: |
| * |
| * Add modes to the connector that the panel is attached to and |
| * return the number of modes added. |
| */ |
| int (*get_modes)(struct drm_panel *panel); |
| |
| /** |
| * @get_timings: |
| * |
| * Copy display timings into the provided array and return |
| * the number of display timings available. |
| */ |
| int (*get_timings)(struct drm_panel *panel, unsigned int num_timings, |
| struct display_timing *timings); |
| }; |
| |
| /** |
| * struct drm_panel - DRM panel object |
| */ |
| struct drm_panel { |
| /** |
| * @drm: |
| * |
| * DRM device owning the panel. |
| */ |
| struct drm_device *drm; |
| |
| /** |
| * @connector: |
| * |
| * DRM connector that the panel is attached to. |
| */ |
| struct drm_connector *connector; |
| |
| /** |
| * @dev: |
| * |
| * Parent device of the panel. |
| */ |
| struct device *dev; |
| |
| /** |
| * @funcs: |
| * |
| * Operations that can be performed on the panel. |
| */ |
| const struct drm_panel_funcs *funcs; |
| |
| /** |
| * @list: |
| * |
| * Panel entry in registry. |
| */ |
| struct list_head list; |
| }; |
| |
| void drm_panel_init(struct drm_panel *panel); |
| |
| int drm_panel_add(struct drm_panel *panel); |
| void drm_panel_remove(struct drm_panel *panel); |
| |
| int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector); |
| void drm_panel_detach(struct drm_panel *panel); |
| |
| int drm_panel_prepare(struct drm_panel *panel); |
| int drm_panel_unprepare(struct drm_panel *panel); |
| |
| int drm_panel_enable(struct drm_panel *panel); |
| int drm_panel_disable(struct drm_panel *panel); |
| |
| int drm_panel_get_modes(struct drm_panel *panel); |
| |
| #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL) |
| struct drm_panel *of_drm_find_panel(const struct device_node *np); |
| #else |
| static inline struct drm_panel *of_drm_find_panel(const struct device_node *np) |
| { |
| return ERR_PTR(-ENODEV); |
| } |
| #endif |
| |
| #endif |