blob: 6cddf551bc110e9ef8c18f342b6946fd41d27e9d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2019 Spreadtrum Communications Inc.
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/dma/sprd-dma.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/compress_driver.h>
#include "sprd-pcm-dma.h"
#define SPRD_COMPR_DMA_CHANS 2
/* Default values if userspace does not set */
#define SPRD_COMPR_MIN_FRAGMENT_SIZE SZ_8K
#define SPRD_COMPR_MAX_FRAGMENT_SIZE SZ_128K
#define SPRD_COMPR_MIN_NUM_FRAGMENTS 4
#define SPRD_COMPR_MAX_NUM_FRAGMENTS 64
/* DSP FIFO size */
#define SPRD_COMPR_MCDT_EMPTY_WMK 0
#define SPRD_COMPR_MCDT_FIFO_SIZE 512
/* Stage 0 IRAM buffer size definition */
#define SPRD_COMPR_IRAM_BUF_SIZE SZ_32K
#define SPRD_COMPR_IRAM_INFO_SIZE (sizeof(struct sprd_compr_playinfo))
#define SPRD_COMPR_IRAM_LINKLIST_SIZE (1024 - SPRD_COMPR_IRAM_INFO_SIZE)
#define SPRD_COMPR_IRAM_SIZE (SPRD_COMPR_IRAM_BUF_SIZE + \
SPRD_COMPR_IRAM_INFO_SIZE + \
SPRD_COMPR_IRAM_LINKLIST_SIZE)
/* Stage 1 DDR buffer size definition */
#define SPRD_COMPR_AREA_BUF_SIZE SZ_2M
#define SPRD_COMPR_AREA_LINKLIST_SIZE 1024
#define SPRD_COMPR_AREA_SIZE (SPRD_COMPR_AREA_BUF_SIZE + \
SPRD_COMPR_AREA_LINKLIST_SIZE)
struct sprd_compr_dma {
struct dma_chan *chan;
struct dma_async_tx_descriptor *desc;
dma_cookie_t cookie;
dma_addr_t phys;
void *virt;
int trans_len;
};
/*
* The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to
* save power. That means we can request 2 dma channels, one for source channel,
* and another one for destination channel. Once the source channel's transaction
* is done, it will trigger the destination channel's transaction automatically
* by hardware signal.
*
* For 2-stage DMA transfer, we can allocate 2 buffers: IRAM buffer (always
* power-on) and DDR buffer. The source channel will transfer data from IRAM
* buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by
* transferring done, the destination channel will start to transfer data from
* DDR buffer to IRAM buffer.
*
* Since the DSP fifo is only 512B, IRAM buffer is allocated by 32K, and DDR
* buffer is larger to 2M. That means only the IRAM 32k data is transferred
* done, we can wake up the AP system to transfer data from DDR to IRAM, and
* other time the AP system can be suspended to save power.
*/
struct sprd_compr_stream {
struct snd_compr_stream *cstream;
struct sprd_compr_ops *compr_ops;
struct sprd_compr_dma dma[SPRD_COMPR_DMA_CHANS];
/* DMA engine channel number */
int num_channels;
/* Stage 0 IRAM buffer */
struct snd_dma_buffer iram_buffer;
/* Stage 1 DDR buffer */
struct snd_dma_buffer compr_buffer;
/* DSP play information IRAM buffer */
dma_addr_t info_phys;
void *info_area;
int info_size;
/* Data size copied to IRAM buffer */
int copied_total;
/* Total received data size from userspace */
int received_total;
/* Stage 0 IRAM buffer received data size */
int received_stage0;
/* Stage 1 DDR buffer received data size */
int received_stage1;
/* Stage 1 DDR buffer pointer */
int stage1_pointer;
};
static int sprd_platform_compr_trigger(struct snd_compr_stream *cstream,
int cmd);
static void sprd_platform_compr_drain_notify(void *arg)
{
struct snd_compr_stream *cstream = arg;
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
memset(stream->info_area, 0, sizeof(struct sprd_compr_playinfo));
snd_compr_drain_notify(cstream);
}
static void sprd_platform_compr_dma_complete(void *data)
{
struct snd_compr_stream *cstream = data;
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct sprd_compr_dma *dma = &stream->dma[1];
/* Update data size copied to IRAM buffer */
stream->copied_total += dma->trans_len;
if (stream->copied_total > stream->received_total)
stream->copied_total = stream->received_total;
snd_compr_fragment_elapsed(cstream);
}
static int sprd_platform_compr_dma_config(struct snd_compr_stream *cstream,
struct snd_compr_params *params,
int channel)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = cstream->private_data;
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct device *dev = component->dev;
struct sprd_compr_data *data = snd_soc_dai_get_drvdata(rtd->cpu_dai);
struct sprd_pcm_dma_params *dma_params = data->dma_params;
struct sprd_compr_dma *dma = &stream->dma[channel];
struct dma_slave_config config = { };
struct sprd_dma_linklist link = { };
enum dma_transfer_direction dir;
struct scatterlist *sg, *sgt;
enum dma_slave_buswidth bus_width;
int period, period_cnt, sg_num = 2;
dma_addr_t src_addr, dst_addr;
unsigned long flags;
int ret, j;
if (!dma_params) {
dev_err(dev, "no dma parameters setting\n");
return -EINVAL;
}
dma->chan = dma_request_slave_channel(dev,
dma_params->chan_name[channel]);
if (!dma->chan) {
dev_err(dev, "failed to request dma channel\n");
return -ENODEV;
}
sgt = sg = devm_kcalloc(dev, sg_num, sizeof(*sg), GFP_KERNEL);
if (!sg) {
ret = -ENOMEM;
goto sg_err;
}
switch (channel) {
case 0:
bus_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
period = (SPRD_COMPR_MCDT_FIFO_SIZE - SPRD_COMPR_MCDT_EMPTY_WMK) * 4;
period_cnt = params->buffer.fragment_size / period;
src_addr = stream->iram_buffer.addr;
dst_addr = dma_params->dev_phys[channel];
flags = SPRD_DMA_FLAGS(SPRD_DMA_SRC_CHN1,
SPRD_DMA_TRANS_DONE_TRG,
SPRD_DMA_FRAG_REQ,
SPRD_DMA_TRANS_INT);
break;
case 1:
bus_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
period = params->buffer.fragment_size;
period_cnt = params->buffer.fragments;
src_addr = stream->compr_buffer.addr;
dst_addr = stream->iram_buffer.addr;
flags = SPRD_DMA_FLAGS(SPRD_DMA_DST_CHN1,
SPRD_DMA_TRANS_DONE_TRG,
SPRD_DMA_FRAG_REQ,
SPRD_DMA_TRANS_INT);
break;
default:
ret = -EINVAL;
goto config_err;
}
dma->trans_len = period * period_cnt;
config.src_maxburst = period;
config.src_addr_width = bus_width;
config.dst_addr_width = bus_width;
if (cstream->direction == SND_COMPRESS_PLAYBACK) {
config.src_addr = src_addr;
config.dst_addr = dst_addr;
dir = DMA_MEM_TO_DEV;
} else {
config.src_addr = dst_addr;
config.dst_addr = src_addr;
dir = DMA_DEV_TO_MEM;
}
sg_init_table(sgt, sg_num);
for (j = 0; j < sg_num; j++, sgt++) {
sg_dma_len(sgt) = dma->trans_len;
sg_dma_address(sgt) = dst_addr;
}
/*
* Configure the link-list address for the DMA engine link-list
* mode.
*/
link.virt_addr = (unsigned long)dma->virt;
link.phy_addr = dma->phys;
ret = dmaengine_slave_config(dma->chan, &config);
if (ret) {
dev_err(dev,
"failed to set slave configuration: %d\n", ret);
goto config_err;
}
/*
* We configure the DMA request mode, interrupt mode, channel
* mode and channel trigger mode by the flags.
*/
dma->desc = dma->chan->device->device_prep_slave_sg(dma->chan, sg,
sg_num, dir,
flags, &link);
if (!dma->desc) {
dev_err(dev, "failed to prepare slave sg\n");
ret = -ENOMEM;
goto config_err;
}
/* Only channel 1 transfer can wake up the AP system. */
if (!params->no_wake_mode && channel == 1) {
dma->desc->callback = sprd_platform_compr_dma_complete;
dma->desc->callback_param = cstream;
}
devm_kfree(dev, sg);
return 0;
config_err:
devm_kfree(dev, sg);
sg_err:
dma_release_channel(dma->chan);
return ret;
}
static int sprd_platform_compr_set_params(struct snd_compr_stream *cstream,
struct snd_compr_params *params)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = cstream->private_data;
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct device *dev = component->dev;
struct sprd_compr_params compr_params = { };
int ret;
/*
* Configure the DMA engine 2-stage transfer mode. Channel 1 set as the
* destination channel, and channel 0 set as the source channel, that
* means once the source channel's transaction is done, it will trigger
* the destination channel's transaction automatically.
*/
ret = sprd_platform_compr_dma_config(cstream, params, 1);
if (ret) {
dev_err(dev, "failed to config stage 1 DMA: %d\n", ret);
return ret;
}
ret = sprd_platform_compr_dma_config(cstream, params, 0);
if (ret) {
dev_err(dev, "failed to config stage 0 DMA: %d\n", ret);
goto config_err;
}
compr_params.direction = cstream->direction;
compr_params.sample_rate = params->codec.sample_rate;
compr_params.channels = stream->num_channels;
compr_params.info_phys = stream->info_phys;
compr_params.info_size = stream->info_size;
compr_params.rate = params->codec.bit_rate;
compr_params.format = params->codec.id;
ret = stream->compr_ops->set_params(cstream->direction, &compr_params);
if (ret) {
dev_err(dev, "failed to set parameters: %d\n", ret);
goto params_err;
}
return 0;
params_err:
dma_release_channel(stream->dma[0].chan);
config_err:
dma_release_channel(stream->dma[1].chan);
return ret;
}
static int sprd_platform_compr_open(struct snd_compr_stream *cstream)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct snd_soc_pcm_runtime *rtd = cstream->private_data;
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct device *dev = component->dev;
struct sprd_compr_data *data = snd_soc_dai_get_drvdata(rtd->cpu_dai);
struct sprd_compr_stream *stream;
struct sprd_compr_callback cb;
int stream_id = cstream->direction, ret;
ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
stream = devm_kzalloc(dev, sizeof(*stream), GFP_KERNEL);
if (!stream)
return -ENOMEM;
stream->cstream = cstream;
stream->num_channels = 2;
stream->compr_ops = data->ops;
/*
* Allocate the stage 0 IRAM buffer size, including the DMA 0
* link-list size and play information of DSP address size.
*/
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_IRAM, dev,
SPRD_COMPR_IRAM_SIZE, &stream->iram_buffer);
if (ret < 0)
goto err_iram;
/* Use to save link-list configuration for DMA 0. */
stream->dma[0].virt = stream->iram_buffer.area + SPRD_COMPR_IRAM_SIZE;
stream->dma[0].phys = stream->iram_buffer.addr + SPRD_COMPR_IRAM_SIZE;
/* Use to update the current data offset of DSP. */
stream->info_phys = stream->iram_buffer.addr + SPRD_COMPR_IRAM_SIZE +
SPRD_COMPR_IRAM_LINKLIST_SIZE;
stream->info_area = stream->iram_buffer.area + SPRD_COMPR_IRAM_SIZE +
SPRD_COMPR_IRAM_LINKLIST_SIZE;
stream->info_size = SPRD_COMPR_IRAM_INFO_SIZE;
/*
* Allocate the stage 1 DDR buffer size, including the DMA 1 link-list
* size.
*/
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev,
SPRD_COMPR_AREA_SIZE, &stream->compr_buffer);
if (ret < 0)
goto err_compr;
/* Use to save link-list configuration for DMA 1. */
stream->dma[1].virt = stream->compr_buffer.area + SPRD_COMPR_AREA_SIZE;
stream->dma[1].phys = stream->compr_buffer.addr + SPRD_COMPR_AREA_SIZE;
cb.drain_notify = sprd_platform_compr_drain_notify;
cb.drain_data = cstream;
ret = stream->compr_ops->open(stream_id, &cb);
if (ret) {
dev_err(dev, "failed to open compress platform: %d\n", ret);
goto err_open;
}
runtime->private_data = stream;
return 0;
err_open:
snd_dma_free_pages(&stream->compr_buffer);
err_compr:
snd_dma_free_pages(&stream->iram_buffer);
err_iram:
devm_kfree(dev, stream);
return ret;
}
static int sprd_platform_compr_free(struct snd_compr_stream *cstream)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = cstream->private_data;
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct device *dev = component->dev;
int stream_id = cstream->direction, i;
for (i = 0; i < stream->num_channels; i++) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (dma->chan) {
dma_release_channel(dma->chan);
dma->chan = NULL;
}
}
snd_dma_free_pages(&stream->compr_buffer);
snd_dma_free_pages(&stream->iram_buffer);
stream->compr_ops->close(stream_id);
devm_kfree(dev, stream);
return 0;
}
static int sprd_platform_compr_trigger(struct snd_compr_stream *cstream,
int cmd)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = cstream->private_data;
struct snd_soc_component *component =
snd_soc_rtdcom_lookup(rtd, DRV_NAME);
struct device *dev = component->dev;
int channels = stream->num_channels, ret = 0, i;
int stream_id = cstream->direction;
if (cstream->direction != SND_COMPRESS_PLAYBACK) {
dev_err(dev, "unsupported compress direction\n");
return -EINVAL;
}
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
for (i = channels - 1; i >= 0; i--) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (!dma->desc)
continue;
dma->cookie = dmaengine_submit(dma->desc);
ret = dma_submit_error(dma->cookie);
if (ret) {
dev_err(dev, "failed to submit request: %d\n",
ret);
return ret;
}
}
for (i = channels - 1; i >= 0; i--) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (dma->chan)
dma_async_issue_pending(dma->chan);
}
ret = stream->compr_ops->start(stream_id);
break;
case SNDRV_PCM_TRIGGER_STOP:
for (i = channels - 1; i >= 0; i--) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (dma->chan)
dmaengine_terminate_async(dma->chan);
}
stream->copied_total = 0;
stream->stage1_pointer = 0;
stream->received_total = 0;
stream->received_stage0 = 0;
stream->received_stage1 = 0;
ret = stream->compr_ops->stop(stream_id);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
for (i = channels - 1; i >= 0; i--) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (dma->chan)
dmaengine_pause(dma->chan);
}
ret = stream->compr_ops->pause(stream_id);
break;
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
for (i = channels - 1; i >= 0; i--) {
struct sprd_compr_dma *dma = &stream->dma[i];
if (dma->chan)
dmaengine_resume(dma->chan);
}
ret = stream->compr_ops->pause_release(stream_id);
break;
case SND_COMPR_TRIGGER_PARTIAL_DRAIN:
case SND_COMPR_TRIGGER_DRAIN:
ret = stream->compr_ops->drain(stream->received_total);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int sprd_platform_compr_pointer(struct snd_compr_stream *cstream,
struct snd_compr_tstamp *tstamp)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
struct sprd_compr_playinfo *info =
(struct sprd_compr_playinfo *)stream->info_area;
tstamp->copied_total = stream->copied_total;
tstamp->pcm_io_frames = info->current_data_offset;
return 0;
}
static int sprd_platform_compr_copy(struct snd_compr_stream *cstream,
char __user *buf, size_t count)
{
struct snd_compr_runtime *runtime = cstream->runtime;
struct sprd_compr_stream *stream = runtime->private_data;
int avail_bytes, data_count = count;
void *dst;
/*
* We usually set fragment size as 32K, and the stage 0 IRAM buffer
* size is 32K too. So if now the received data size of the stage 0
* IRAM buffer is less than 32K, that means we have some available
* spaces for the stage 0 IRAM buffer.
*/
if (stream->received_stage0 < runtime->fragment_size) {
avail_bytes = runtime->fragment_size - stream->received_stage0;
dst = stream->iram_buffer.area + stream->received_stage0;
if (avail_bytes >= data_count) {
/*
* Copy data to the stage 0 IRAM buffer directly if
* spaces are enough.
*/
if (copy_from_user(dst, buf, data_count))
return -EFAULT;
stream->received_stage0 += data_count;
stream->copied_total += data_count;
goto copy_done;
} else {
/*
* If the data count is larger than the available spaces
* of the the stage 0 IRAM buffer, we should copy one
* partial data to the stage 0 IRAM buffer, and copy
* the left to the stage 1 DDR buffer.
*/
if (copy_from_user(dst, buf, avail_bytes))
return -EFAULT;
data_count -= avail_bytes;
stream->received_stage0 += avail_bytes;
stream->copied_total += avail_bytes;
buf += avail_bytes;
}
}
/*
* Copy data to the stage 1 DDR buffer if no spaces for the stage 0 IRAM
* buffer.
*/
dst = stream->compr_buffer.area + stream->stage1_pointer;
if (data_count < stream->compr_buffer.bytes - stream->stage1_pointer) {
if (copy_from_user(dst, buf, data_count))
return -EFAULT;
stream->stage1_pointer += data_count;
} else {
avail_bytes = stream->compr_buffer.bytes - stream->stage1_pointer;
if (copy_from_user(dst, buf, avail_bytes))
return -EFAULT;
if (copy_from_user(stream->compr_buffer.area, buf + avail_bytes,
data_count - avail_bytes))
return -EFAULT;
stream->stage1_pointer = data_count - avail_bytes;
}
stream->received_stage1 += data_count;
copy_done:
/* Update the copied data size. */
stream->received_total += count;
return count;
}
static int sprd_platform_compr_get_caps(struct snd_compr_stream *cstream,
struct snd_compr_caps *caps)
{
caps->direction = cstream->direction;
caps->min_fragment_size = SPRD_COMPR_MIN_FRAGMENT_SIZE;
caps->max_fragment_size = SPRD_COMPR_MAX_FRAGMENT_SIZE;
caps->min_fragments = SPRD_COMPR_MIN_NUM_FRAGMENTS;
caps->max_fragments = SPRD_COMPR_MAX_NUM_FRAGMENTS;
caps->num_codecs = 2;
caps->codecs[0] = SND_AUDIOCODEC_MP3;
caps->codecs[1] = SND_AUDIOCODEC_AAC;
return 0;
}
static int
sprd_platform_compr_get_codec_caps(struct snd_compr_stream *cstream,
struct snd_compr_codec_caps *codec)
{
switch (codec->codec) {
case SND_AUDIOCODEC_MP3:
codec->num_descriptors = 2;
codec->descriptor[0].max_ch = 2;
codec->descriptor[0].bit_rate[0] = 320;
codec->descriptor[0].bit_rate[1] = 128;
codec->descriptor[0].num_bitrates = 2;
codec->descriptor[0].profiles = 0;
codec->descriptor[0].modes = SND_AUDIOCHANMODE_MP3_STEREO;
codec->descriptor[0].formats = 0;
break;
case SND_AUDIOCODEC_AAC:
codec->num_descriptors = 2;
codec->descriptor[1].max_ch = 2;
codec->descriptor[1].bit_rate[0] = 320;
codec->descriptor[1].bit_rate[1] = 128;
codec->descriptor[1].num_bitrates = 2;
codec->descriptor[1].profiles = 0;
codec->descriptor[1].modes = 0;
codec->descriptor[1].formats = 0;
break;
default:
return -EINVAL;
}
return 0;
}
const struct snd_compr_ops sprd_platform_compr_ops = {
.open = sprd_platform_compr_open,
.free = sprd_platform_compr_free,
.set_params = sprd_platform_compr_set_params,
.trigger = sprd_platform_compr_trigger,
.pointer = sprd_platform_compr_pointer,
.copy = sprd_platform_compr_copy,
.get_caps = sprd_platform_compr_get_caps,
.get_codec_caps = sprd_platform_compr_get_codec_caps,
};
MODULE_DESCRIPTION("Spreadtrum ASoC Compress Platform Driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:compress-platform");