Merge tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for 4.18-rc3.
Nothing major or big, all just fixes for reported problems since
4.18-rc1. All of these have been in linux-next this week with no
reported problems"
* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Return an ERR_PTR in ion_map_kernel
staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
iio: buffer: fix the function signature to match implementation
iio: mma8452: Fix ignoring MMA8452_INT_DRDY
iio: tsl2x7x/tsl2772: avoid potential division by zero
iio: pressure: bmp280: fix relative humidity unit
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 7e3d82c..c149c9c 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1053,7 +1053,7 @@
if (src < 0)
return IRQ_NONE;
- if (!(src & data->chip_info->enabled_events))
+ if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY)))
return IRQ_NONE;
if (src & MMA8452_INT_DRDY) {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f9c0624..42618fe 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -959,6 +959,8 @@
}
irq_type = irqd_get_trigger_type(desc);
+ if (!irq_type)
+ irq_type = IRQF_TRIGGER_RISING;
if (irq_type == IRQF_TRIGGER_RISING)
st->irq_mask = INV_MPU6050_ACTIVE_HIGH;
else if (irq_type == IRQF_TRIGGER_FALLING)
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index 34d42a2..df5b2a0 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -582,6 +582,8 @@
"%s: failed to get lux\n", __func__);
return lux_val;
}
+ if (lux_val == 0)
+ return -ERANGE;
ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) /
lux_val;
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 5ec3e41b..fe87d27 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -415,10 +415,9 @@
}
comp_humidity = bmp280_compensate_humidity(data, adc_humidity);
- *val = comp_humidity;
- *val2 = 1024;
+ *val = comp_humidity * 1000 / 1024;
- return IIO_VAL_FRACTIONAL;
+ return IIO_VAL_INT;
}
static int bmp280_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index e8c4403..31db510 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -30,7 +30,7 @@
struct page **tmp = pages;
if (!pages)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (buffer->flags & ION_FLAG_CACHED)
pgprot = PAGE_KERNEL;
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index ea194aa..257b0da 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -642,7 +642,7 @@
/* Make sure D/A update mode is direct update */
outb(0, dev->iobase + DAQP_AUX_REG);
- for (i = 0; i > insn->n; i++) {
+ for (i = 0; i < insn->n; i++) {
unsigned int val = data[i];
int ret;
diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h
index 767467d..67c7537 100644
--- a/include/linux/iio/buffer-dma.h
+++ b/include/linux/iio/buffer-dma.h
@@ -141,7 +141,7 @@
char __user *user_buffer);
size_t iio_dma_buffer_data_available(struct iio_buffer *buffer);
int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd);
-int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length);
+int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length);
int iio_dma_buffer_request_update(struct iio_buffer *buffer);
int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue,
