# SPDX-License-Identifier: GPL-2.0
config PARISC
	def_bool y
	select ALTERNATE_USER_ADDRESS_SPACE
	select ARCH_32BIT_OFF_T if !64BIT
	select ARCH_MIGHT_HAVE_PC_PARPORT
	select HAVE_FUNCTION_TRACER
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_SYSCALL_TRACEPOINTS
	select ARCH_WANT_FRAME_POINTERS
	select ARCH_HAS_ELF_RANDOMIZE
	select ARCH_HAS_STRICT_KERNEL_RWX
	select ARCH_HAS_STRICT_MODULE_RWX
	select ARCH_HAS_UBSAN_SANITIZE_ALL
	select ARCH_HAS_PTE_SPECIAL
	select ARCH_NO_SG_CHAIN
	select ARCH_SUPPORTS_HUGETLBFS if PA20
	select ARCH_SUPPORTS_MEMORY_FAILURE
	select ARCH_STACKWALK
	select ARCH_HAS_DEBUG_VM_PGTABLE
	select HAVE_RELIABLE_STACKTRACE
	select DMA_OPS
	select RTC_CLASS
	select RTC_DRV_GENERIC
	select INIT_ALL_POSSIBLE
	select BUG
	select HAVE_PCI
	select HAVE_PERF_EVENTS
	select HAVE_KERNEL_BZIP2
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_LZ4
	select HAVE_KERNEL_LZMA
	select HAVE_KERNEL_LZO
	select HAVE_KERNEL_XZ
	select GENERIC_ATOMIC64 if !64BIT
	select GENERIC_IRQ_PROBE
	select GENERIC_PCI_IOMAP
	select ARCH_HAVE_NMI_SAFE_CMPXCHG
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_ARCH_TOPOLOGY if SMP
	select GENERIC_CPU_DEVICES if !SMP
	select GENERIC_LIB_DEVMEM_IS_ALLOWED
	select SYSCTL_ARCH_UNALIGN_ALLOW
	select SYSCTL_EXCEPTION_TRACE
	select HAVE_MOD_ARCH_SPECIFIC
	select MODULES_USE_ELF_RELA
	select CLONE_BACKWARDS
	select TTY # Needed for pdc_cons.c
	select HAVE_DEBUG_STACKOVERFLOW
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_HASH
	select HAVE_ARCH_JUMP_LABEL
	select HAVE_ARCH_JUMP_LABEL_RELATIVE
	select HAVE_ARCH_KFENCE
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_REGS_AND_STACK_ACCESS_API
	select GENERIC_SCHED_CLOCK
	select GENERIC_IRQ_MIGRATION if SMP
	select HAVE_UNSTABLE_SCHED_CLOCK if SMP
	select LEGACY_TIMER_TICK
	select CPU_NO_EFFICIENT_FFS
	select THREAD_INFO_IN_TASK
	select NEED_DMA_MAP_STATE
	select NEED_SG_DMA_LENGTH
	select HAVE_ARCH_KGDB
	select HAVE_KPROBES
	select HAVE_KRETPROBES
	select HAVE_DYNAMIC_FTRACE if $(cc-option,-fpatchable-function-entry=1,1)
	select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
	select HAVE_KPROBES_ON_FTRACE
	select HAVE_DYNAMIC_FTRACE_WITH_REGS
	select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
	select TRACE_IRQFLAGS_SUPPORT
	select HAVE_FUNCTION_DESCRIPTORS if 64BIT

	help
	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
	  in many of their workstations & servers (HP9000 700 and 800 series,
	  and later HP3000 series).  The PA-RISC Linux project home page is
	  at <https://parisc.wiki.kernel.org>.

config CPU_BIG_ENDIAN
	def_bool y

config MMU
	def_bool y

config STACK_GROWSUP
	def_bool y

config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPTION

config ARCH_HAS_ILOG2_U32
	bool
	default n

config ARCH_HAS_ILOG2_U64
	bool
	default n

config GENERIC_BUG
	def_bool y
	depends on BUG
	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT

config GENERIC_BUG_RELATIVE_POINTERS
	bool

config GENERIC_HWEIGHT
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config TIME_LOW_RES
	bool
	depends on SMP
	default y

# unless you want to implement ACPI on PA-RISC ... ;-)
config PM
	bool

config STACKTRACE_SUPPORT
	def_bool y

config LOCKDEP_SUPPORT
	bool
	default y

config ISA_DMA_API
	bool

config ARCH_MAY_HAVE_PC_FDC
	bool
	depends on BROKEN
	default y

config PGTABLE_LEVELS
	int
	default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
	default 2

menu "Processor type and features"

choice
	prompt "Processor type"
	default PA7000 if "$(ARCH)" = "parisc"

config PA7000
	bool "PA7000/PA7100" if "$(ARCH)" = "parisc"
	help
	  This is the processor type of your CPU.  This information is
	  used for optimizing purposes.  In order to compile a kernel
	  that can run on all 32-bit PA CPUs (albeit not optimally fast),
	  you can specify "PA7000" here.

	  Specifying "PA8000" here will allow you to select a 64-bit kernel
	  which is required on some machines.

config PA7100LC
	bool "PA7100LC" if "$(ARCH)" = "parisc"
	help
	  Select this option for the PCX-L processor, as used in the
	  712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
	  D200, D210, D300, D310 and E-class

config PA7200
	bool "PA7200" if "$(ARCH)" = "parisc"
	help
	  Select this option for the PCX-T' processor, as used in the
	  C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
	  K100, K200, K210, K220, K400, K410 and K420

config PA7300LC
	bool "PA7300LC" if "$(ARCH)" = "parisc"
	help
	  Select this option for the PCX-L2 processor, as used in the
	  744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
	  D220, D230, D320 and D330.

config PA8X00
	bool "PA8000 and up"
	help
	  Select this option for PCX-U to PCX-W2 processors.

endchoice

# Define implied options from the CPU selection here

config PA20
	def_bool y
	depends on PA8X00

config PA11
	def_bool y
	depends on PA7000 || PA7100LC || PA7200 || PA7300LC
	select ARCH_HAS_SYNC_DMA_FOR_CPU
	select ARCH_HAS_SYNC_DMA_FOR_DEVICE

config PREFETCH
	def_bool y
	depends on PA8X00 || PA7200

config PARISC_HUGE_KERNEL
	def_bool y if !MODULES || UBSAN || FTRACE || COMPILE_TEST

config MLONGCALLS
	def_bool y if PARISC_HUGE_KERNEL
	bool "Enable the -mlong-calls compiler option for big kernels" if !PARISC_HUGE_KERNEL
	depends on PA8X00
	help
	  If you configure the kernel to include many drivers built-in instead
	  as modules, the kernel executable may become too big, so that the
	  linker will not be able to resolve some long branches and fails to link
	  your vmlinux kernel. In that case enabling this option will help you
	  to overcome this limit by using the -mlong-calls compiler option.

	  Usually you want to say N here, unless you e.g. want to build
	  a kernel which includes all necessary drivers built-in and which can
	  be used for TFTP booting without the need to have an initrd ramdisk.

	  Enabling this option will probably slow down your kernel.

config 64BIT
	def_bool y if "$(ARCH)" = "parisc64"
	bool "64-bit kernel" if "$(ARCH)" = "parisc"
	depends on PA8X00
	help
	  Enable this if you want to support 64bit kernel on PA-RISC platform.

	  At the moment, only people willing to use more than 2GB of RAM,
	  or having a 64bit-only capable PA-RISC machine should say Y here.

	  Since there is no 64bit userland on PA-RISC, there is no point to
	  enable this option otherwise. The 64bit kernel is significantly bigger
	  and slower than the 32bit one.

choice
	prompt "Kernel page size"
	default PARISC_PAGE_SIZE_4KB

config PARISC_PAGE_SIZE_4KB
	bool "4KB"
	help
	  This lets you select the page size of the kernel.  For best
	  performance, a page size of 16KB is recommended.  For best
	  compatibility with 32bit applications, a page size of 4KB should be
	  selected (the vast majority of 32bit binaries work perfectly fine
	  with a larger page size).

	  4KB                For best 32bit compatibility
	  16KB               For best performance
	  64KB               For best performance, might give more overhead.

	  If you don't know what to do, choose 4KB.

config PARISC_PAGE_SIZE_16KB
	bool "16KB"
	depends on PA8X00 && BROKEN && !KFENCE

config PARISC_PAGE_SIZE_64KB
	bool "64KB"
	depends on PA8X00 && BROKEN && !KFENCE

endchoice

config SMP
	bool "Symmetric multi-processing support"
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, say N. If you have a system with more
	  than one CPU, say Y.

	  If you say N here, the kernel will run on uni- and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine.
	  On a uniprocessor machine, the kernel will run faster if you say N.

	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
	  available at <https://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config SCHED_MC
	bool "Multi-core scheduler support"
	depends on GENERIC_ARCH_TOPOLOGY && PA8X00
	help
	  Multi-core scheduler support improves the CPU scheduler's decision
	  making when dealing with multi-core CPU chips at a cost of slightly
	  increased overhead in some places. If unsure say N here.

config IRQSTACKS
	bool "Use separate kernel stacks when processing interrupts"
	default y
	help
	  If you say Y here the kernel will use separate kernel stacks
	  for handling hard and soft interrupts.  This can help avoid
	  overflowing the process kernel stacks.

config TLB_PTLOCK
	bool "Use page table locks in TLB fault handler"
	depends on SMP
	default n
	help
	  Select this option to enable page table locking in the TLB
	  fault handler. This ensures that page table entries are
	  updated consistently on SMP machines at the expense of some
	  loss in performance.

config HOTPLUG_CPU
	bool
	default y if SMP

config ARCH_SELECT_MEMORY_MODEL
	def_bool y
	depends on 64BIT

config ARCH_SPARSEMEM_ENABLE
	def_bool y
	depends on 64BIT

config ARCH_FLATMEM_ENABLE
	def_bool y

config ARCH_SPARSEMEM_DEFAULT
	def_bool y
	depends on ARCH_SPARSEMEM_ENABLE

source "kernel/Kconfig.hz"

config COMPAT
	def_bool y
	depends on 64BIT

config AUDIT_ARCH
	def_bool y

config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4" if 64BIT
	default "16"

config KEXEC
	bool "Kexec system call"
	select KEXEC_CORE
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
	  but it is independent of the system firmware.   And like a reboot
	  you can start any kernel with it, not just Linux.

	  It is an ongoing process to be certain the hardware in a machine
	  shutdown, so do not be surprised if this code does not
	  initially work for you.

config KEXEC_FILE
	bool "kexec file based system call"
	select KEXEC_CORE
	select KEXEC_ELF
	help
	  This enables the kexec_file_load() System call. This is
	  file based and takes file descriptors as system call argument
	  for kernel and initramfs as opposed to list of segments as
	  accepted by previous system call.

endmenu

source "drivers/parisc/Kconfig"