blob: c696f3241a361ccb4efb387ff9e5f608f67b8c8f [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Pin controller and GPIO driver for Amlogic Meson SoCs
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
*/
#include <linux/gpio/driver.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/types.h>
/**
* struct meson_pmx_group - a pinmux group
*
* @name: group name
* @pins: pins in the group
* @num_pins: number of pins in the group
* @is_gpio: whether the group is a single GPIO group
* @reg: register offset for the group in the domain mux registers
* @bit bit index enabling the group
* @domain: index of the domain this group belongs to
*/
struct meson_pmx_group {
const char *name;
const unsigned int *pins;
unsigned int num_pins;
const void *data;
};
/**
* struct meson_pmx_func - a pinmux function
*
* @name: function name
* @groups: groups in the function
* @num_groups: number of groups in the function
*/
struct meson_pmx_func {
const char *name;
const char * const *groups;
unsigned int num_groups;
};
/**
* struct meson_reg_desc - a register descriptor
*
* @reg: register offset in the regmap
* @bit: bit index in register
*
* The structure describes the information needed to control pull,
* pull-enable, direction, etc. for a single pin
*/
struct meson_reg_desc {
unsigned int reg;
unsigned int bit;
};
/**
* enum meson_reg_type - type of registers encoded in @meson_reg_desc
*/
enum meson_reg_type {
REG_PULLEN,
REG_PULL,
REG_DIR,
REG_OUT,
REG_IN,
REG_DS,
NUM_REG,
};
/**
* enum meson_pinconf_drv - value of drive-strength supported
*/
enum meson_pinconf_drv {
MESON_PINCONF_DRV_500UA,
MESON_PINCONF_DRV_2500UA,
MESON_PINCONF_DRV_3000UA,
MESON_PINCONF_DRV_4000UA,
};
/**
* struct meson bank
*
* @name: bank name
* @first: first pin of the bank
* @last: last pin of the bank
* @irq: hwirq base number of the bank
* @regs: array of register descriptors
*
* A bank represents a set of pins controlled by a contiguous set of
* bits in the domain registers. The structure specifies which bits in
* the regmap control the different functionalities. Each member of
* the @regs array refers to the first pin of the bank.
*/
struct meson_bank {
const char *name;
unsigned int first;
unsigned int last;
int irq_first;
int irq_last;
struct meson_reg_desc regs[NUM_REG];
};
struct meson_pinctrl_data {
const char *name;
const struct pinctrl_pin_desc *pins;
struct meson_pmx_group *groups;
struct meson_pmx_func *funcs;
unsigned int num_pins;
unsigned int num_groups;
unsigned int num_funcs;
struct meson_bank *banks;
unsigned int num_banks;
const struct pinmux_ops *pmx_ops;
void *pmx_data;
};
struct meson_pinctrl {
struct device *dev;
struct pinctrl_dev *pcdev;
struct pinctrl_desc desc;
struct meson_pinctrl_data *data;
struct regmap *reg_mux;
struct regmap *reg_pullen;
struct regmap *reg_pull;
struct regmap *reg_gpio;
struct regmap *reg_ds;
struct gpio_chip chip;
struct device_node *of_node;
};
#define FUNCTION(fn) \
{ \
.name = #fn, \
.groups = fn ## _groups, \
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
#define BANK_DS(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib, \
dsr, dsb) \
{ \
.name = n, \
.first = f, \
.last = l, \
.irq_first = fi, \
.irq_last = li, \
.regs = { \
[REG_PULLEN] = { per, peb }, \
[REG_PULL] = { pr, pb }, \
[REG_DIR] = { dr, db }, \
[REG_OUT] = { or, ob }, \
[REG_IN] = { ir, ib }, \
[REG_DS] = { dsr, dsb }, \
}, \
}
#define BANK(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
BANK_DS(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib, 0, 0)
#define MESON_PIN(x) PINCTRL_PIN(x, #x)
/* Common pmx functions */
int meson_pmx_get_funcs_count(struct pinctrl_dev *pcdev);
const char *meson_pmx_get_func_name(struct pinctrl_dev *pcdev,
unsigned selector);
int meson_pmx_get_groups(struct pinctrl_dev *pcdev,
unsigned selector,
const char * const **groups,
unsigned * const num_groups);
/* Common probe function */
int meson_pinctrl_probe(struct platform_device *pdev);